@@ -5444,7 +5444,7 @@ static int mvneta_probe(struct platform_device *pdev)
pp->phylink_config.dev = &dev->dev;
pp->phylink_config.type = PHYLINK_NETDEV;
- pp->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_10 |
+ pp->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_EEE | MAC_10 |
MAC_100 | MAC_1000FD | MAC_2500FD;
phy_interface_set_rgmii(pp->phylink_config.supported_interfaces);
@@ -1543,6 +1543,8 @@ static int lan743x_phy_open(struct lan743x_adapter *adapter)
phy->fc_request_control = (FLOW_CTRL_RX | FLOW_CTRL_TX);
phy->fc_autoneg = phydev->autoneg;
+ phy_support_eee(phydev);
+
phy_start(phydev);
phy_start_aneg(phydev);
phy_attached_info(phydev);
@@ -1233,6 +1233,9 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
~(MAC_10HD | MAC_100HD | MAC_1000HD);
priv->phylink_config.mac_managed_pm = true;
+ if (priv->dma_cap.eee)
+ priv->phylink_config.mac_capabilities |= MAC_EEE;
+
phylink = phylink_create(&priv->phylink_config, fwnode,
mode, &stmmac_phylink_mac_ops);
if (IS_ERR(phylink))
@@ -1698,6 +1698,9 @@ int dsa_port_phylink_create(struct dsa_port *dp)
if (ds->ops->phylink_get_caps)
ds->ops->phylink_get_caps(ds, dp->index, &dp->pl_config);
+ if (ds->ops->set_mac_eee && ds->ops->get_mac_eee)
+ dp->pl_config.mac_capabilities |= MAC_EEE;
+
pl = phylink_create(&dp->pl_config, of_fwnode_handle(dp->dn),
mode, &dsa_port_phylink_mac_ops);
if (IS_ERR(pl)) {
For MAC drivers making use of phylink, and which support EEE, set the MAC_EEE bit in the mac_capabilities. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/ethernet/marvell/mvneta.c | 2 +- drivers/net/ethernet/microchip/lan743x_main.c | 2 ++ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++ net/dsa/port.c | 3 +++ 4 files changed, 9 insertions(+), 1 deletion(-)