@@ -866,6 +866,24 @@ static void tsnep_rx_init(struct tsnep_rx *rx)
rx->increment_owner_counter = TSNEP_RING_SIZE - 1;
}
+static void tsnep_rx_enable(struct tsnep_rx *rx)
+{
+ /* descriptor properties shall be valid before hardware is notified */
+ dma_wmb();
+
+ iowrite32(TSNEP_CONTROL_RX_ENABLE, rx->addr + TSNEP_CONTROL);
+}
+
+static void tsnep_rx_disable(struct tsnep_rx *rx)
+{
+ u32 val;
+
+ iowrite32(TSNEP_CONTROL_RX_DISABLE, rx->addr + TSNEP_CONTROL);
+ readx_poll_timeout(ioread32, rx->addr + TSNEP_CONTROL, val,
+ ((val & TSNEP_CONTROL_RX_ENABLE) == 0), 10000,
+ 1000000);
+}
+
static int tsnep_rx_desc_available(struct tsnep_rx *rx)
{
if (rx->read <= rx->write)
@@ -932,13 +950,10 @@ static void tsnep_rx_activate(struct tsnep_rx *rx, int index)
entry->desc->properties = __cpu_to_le32(entry->properties);
}
-static int tsnep_rx_refill(struct tsnep_rx *rx, int count, bool reuse)
+static int tsnep_rx_alloc(struct tsnep_rx *rx, int count, bool reuse)
{
- int index;
bool alloc_failed = false;
- bool enable = false;
- int i;
- int retval;
+ int i, index, retval;
for (i = 0; i < count && !alloc_failed; i++) {
index = (rx->write + i) % TSNEP_RING_SIZE;
@@ -956,22 +971,23 @@ static int tsnep_rx_refill(struct tsnep_rx *rx, int count, bool reuse)
}
tsnep_rx_activate(rx, index);
-
- enable = true;
}
- if (enable) {
+ if (i)
rx->write = (rx->write + i) % TSNEP_RING_SIZE;
- /* descriptor properties shall be valid before hardware is
- * notified
- */
- dma_wmb();
+ return i;
+}
- iowrite32(TSNEP_CONTROL_RX_ENABLE, rx->addr + TSNEP_CONTROL);
- }
+static int tsnep_rx_refill(struct tsnep_rx *rx, int count, bool reuse)
+{
+ int desc_refilled;
- return i;
+ desc_refilled = tsnep_rx_alloc(rx, count, reuse);
+ if (desc_refilled)
+ tsnep_rx_enable(rx);
+
+ return desc_refilled;
}
static bool tsnep_xdp_run_prog(struct tsnep_rx *rx, struct bpf_prog *prog,
@@ -1199,6 +1215,7 @@ static bool tsnep_rx_pending(struct tsnep_rx *rx)
static int tsnep_rx_open(struct tsnep_rx *rx)
{
+ int desc_available;
int retval;
retval = tsnep_rx_ring_create(rx);
@@ -1207,20 +1224,19 @@ static int tsnep_rx_open(struct tsnep_rx *rx)
tsnep_rx_init(rx);
- tsnep_rx_refill(rx, tsnep_rx_desc_available(rx), false);
+ desc_available = tsnep_rx_desc_available(rx);
+ retval = tsnep_rx_alloc(rx, desc_available, false);
+ if (retval != desc_available) {
+ tsnep_rx_ring_cleanup(rx);
+
+ return -ENOMEM;
+ }
return 0;
}
static void tsnep_rx_close(struct tsnep_rx *rx)
{
- u32 val;
-
- iowrite32(TSNEP_CONTROL_RX_DISABLE, rx->addr + TSNEP_CONTROL);
- readx_poll_timeout(ioread32, rx->addr + TSNEP_CONTROL, val,
- ((val & TSNEP_CONTROL_RX_ENABLE) == 0), 10000,
- 1000000);
-
tsnep_rx_ring_cleanup(rx);
}
@@ -1379,6 +1395,27 @@ static int tsnep_queue_open(struct tsnep_adapter *adapter,
return retval;
}
+static void tsnep_queue_enable(struct tsnep_queue *queue)
+{
+ napi_enable(&queue->napi);
+ tsnep_enable_irq(queue->adapter, queue->irq_mask);
+
+ if (queue->rx)
+ tsnep_rx_enable(queue->rx);
+}
+
+static void tsnep_queue_disable(struct tsnep_queue *queue)
+{
+ napi_disable(&queue->napi);
+ tsnep_disable_irq(queue->adapter, queue->irq_mask);
+
+ /* disable RX after NAPI polling has been disabled, because RX can be
+ * enabled during NAPI polling
+ */
+ if (queue->rx)
+ tsnep_rx_disable(queue->rx);
+}
+
static int tsnep_netdev_open(struct net_device *netdev)
{
struct tsnep_adapter *adapter = netdev_priv(netdev);
@@ -1415,11 +1452,8 @@ static int tsnep_netdev_open(struct net_device *netdev)
if (retval)
goto phy_failed;
- for (i = 0; i < adapter->num_queues; i++) {
- napi_enable(&adapter->queue[i].napi);
-
- tsnep_enable_irq(adapter, adapter->queue[i].irq_mask);
- }
+ for (i = 0; i < adapter->num_queues; i++)
+ tsnep_queue_enable(&adapter->queue[i]);
return 0;
@@ -1446,9 +1480,7 @@ static int tsnep_netdev_close(struct net_device *netdev)
tsnep_phy_close(adapter);
for (i = 0; i < adapter->num_queues; i++) {
- tsnep_disable_irq(adapter, adapter->queue[i].irq_mask);
-
- napi_disable(&adapter->queue[i].napi);
+ tsnep_queue_disable(&adapter->queue[i]);
tsnep_queue_close(&adapter->queue[i], i == 0);
Move queue enable and disable code to separate functions. This way the activation and deactivation of the queues are defined actions, which can be used in future execution paths. This functions will be used for the queue reconfiguration at runtime, which is necessary for XSK zero-copy support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> --- drivers/net/ethernet/engleder/tsnep_main.c | 94 +++++++++++++++------- 1 file changed, 63 insertions(+), 31 deletions(-)