@@ -11,6 +11,7 @@
#define RGMII_IO_MACRO_CONFIG 0x0
#define SDCC_HC_REG_DLL_CONFIG 0x4
+#define SDCC_TEST_CTL 0x8
#define SDCC_HC_REG_DDR_CONFIG 0xC
#define SDCC_HC_REG_DLL_CONFIG2 0x10
#define SDC4_STATUS 0x14
@@ -49,6 +50,7 @@
#define SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY GENMASK(26, 21)
#define SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE GENMASK(29, 27)
#define SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_EN BIT(30)
+#define SDCC_DDR_CONFIG_TCXO_CYCLES_CNT GENMASK(11, 9)
#define SDCC_DDR_CONFIG_PRG_RCLK_DLY GENMASK(8, 0)
/* SDCC_HC_REG_DLL_CONFIG2 fields */
@@ -79,6 +81,8 @@ struct ethqos_emac_driver_data {
const struct ethqos_emac_por *por;
unsigned int num_por;
bool rgmii_config_loopback_en;
+ bool has_emac3;
+ struct dwmac4_addrs dwmac4_addrs;
};
struct qcom_ethqos {
@@ -92,6 +96,7 @@ struct qcom_ethqos {
const struct ethqos_emac_por *por;
unsigned int num_por;
bool rgmii_config_loopback_en;
+ bool has_emac3;
};
static int rgmii_readl(struct qcom_ethqos *ethqos, unsigned int offset)
@@ -184,6 +189,7 @@ static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
.por = emac_v2_3_0_por,
.num_por = ARRAY_SIZE(emac_v2_3_0_por),
.rgmii_config_loopback_en = true,
+ .has_emac3 = false,
};
static const struct ethqos_emac_por emac_v2_1_0_por[] = {
@@ -199,6 +205,39 @@ static const struct ethqos_emac_driver_data emac_v2_1_0_data = {
.por = emac_v2_1_0_por,
.num_por = ARRAY_SIZE(emac_v2_1_0_por),
.rgmii_config_loopback_en = false,
+ .has_emac3 = false,
+};
+
+static const struct ethqos_emac_por emac_v3_0_0_por[] = {
+ { .offset = RGMII_IO_MACRO_CONFIG, .value = 0x40c01343 },
+ { .offset = SDCC_HC_REG_DLL_CONFIG, .value = 0x2004642c },
+ { .offset = SDCC_HC_REG_DDR_CONFIG, .value = 0x80040800 },
+ { .offset = SDCC_HC_REG_DLL_CONFIG2, .value = 0x00200000 },
+ { .offset = SDCC_USR_CTL, .value = 0x00010800 },
+ { .offset = RGMII_IO_MACRO_CONFIG2, .value = 0x00002060 },
+};
+
+static const struct ethqos_emac_driver_data emac_v3_0_0_data = {
+ .por = emac_v3_0_0_por,
+ .num_por = ARRAY_SIZE(emac_v3_0_0_por),
+ .rgmii_config_loopback_en = false,
+ .has_emac3 = true,
+ .dwmac4_addrs = {
+ .dma_chan = 0x00008100,
+ .dma_chan_offset = 0x1000,
+ .mtl_chan = 0x00008000,
+ .mtl_chan_offset = 0x1000,
+ .mtl_ets_ctrl = 0x00008010,
+ .mtl_ets_ctrl_offset = 0x1000,
+ .mtl_txq_weight = 0x00008018,
+ .mtl_txq_weight_offset = 0x1000,
+ .mtl_send_slp_cred = 0x0000801c,
+ .mtl_send_slp_cred_offset = 0x1000,
+ .mtl_high_cred = 0x00008020,
+ .mtl_high_cred_offset = 0x1000,
+ .mtl_low_cred = 0x00008024,
+ .mtl_low_cred_offset = 0x1000,
+ },
};
static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
@@ -222,11 +261,13 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
rgmii_updatel(ethqos, SDCC_DLL_CONFIG_DLL_EN,
SDCC_DLL_CONFIG_DLL_EN, SDCC_HC_REG_DLL_CONFIG);
- rgmii_updatel(ethqos, SDCC_DLL_MCLK_GATING_EN,
- 0, SDCC_HC_REG_DLL_CONFIG);
+ if (!ethqos->has_emac3) {
+ rgmii_updatel(ethqos, SDCC_DLL_MCLK_GATING_EN,
+ 0, SDCC_HC_REG_DLL_CONFIG);
- rgmii_updatel(ethqos, SDCC_DLL_CDR_FINE_PHASE,
- 0, SDCC_HC_REG_DLL_CONFIG);
+ rgmii_updatel(ethqos, SDCC_DLL_CDR_FINE_PHASE,
+ 0, SDCC_HC_REG_DLL_CONFIG);
+ }
/* Wait for CK_OUT_EN clear */
do {
@@ -261,18 +302,20 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_CAL_EN,
SDCC_DLL_CONFIG2_DDR_CAL_EN, SDCC_HC_REG_DLL_CONFIG2);
- rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DLL_CLOCK_DIS,
- 0, SDCC_HC_REG_DLL_CONFIG2);
+ if (!ethqos->has_emac3) {
+ rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DLL_CLOCK_DIS,
+ 0, SDCC_HC_REG_DLL_CONFIG2);
- rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_MCLK_FREQ_CALC,
- 0x1A << 10, SDCC_HC_REG_DLL_CONFIG2);
+ rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_MCLK_FREQ_CALC,
+ 0x1A << 10, SDCC_HC_REG_DLL_CONFIG2);
- rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SEL,
- BIT(2), SDCC_HC_REG_DLL_CONFIG2);
+ rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SEL,
+ BIT(2), SDCC_HC_REG_DLL_CONFIG2);
- rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
- SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
- SDCC_HC_REG_DLL_CONFIG2);
+ rgmii_updatel(ethqos, SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
+ SDCC_DLL_CONFIG2_DDR_TRAFFIC_INIT_SW,
+ SDCC_HC_REG_DLL_CONFIG2);
+ }
return 0;
}
@@ -327,9 +370,17 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
RGMII_CONFIG2_RX_PROG_SWAP,
RGMII_IO_MACRO_CONFIG2);
- /* Set PRG_RCLK_DLY to 57 for 1.8 ns delay */
- rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
- 57, SDCC_HC_REG_DDR_CONFIG);
+ /* PRG_RCLK_DLY = TCXO period * TCXO_CYCLES_CNT / 2 * RX delay ns,
+ * in practice this becomes PRG_RCLK_DLY = 52 * 4 / 2 * RX delay ns
+ */
+ if (ethqos->has_emac3)
+ /* 0.9 ns */
+ rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+ 115, SDCC_HC_REG_DDR_CONFIG);
+ else
+ /* 1.8 ns */
+ rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_RCLK_DLY,
+ 57, SDCC_HC_REG_DDR_CONFIG);
rgmii_updatel(ethqos, SDCC_DDR_CONFIG_PRG_DLY_EN,
SDCC_DDR_CONFIG_PRG_DLY_EN,
SDCC_HC_REG_DDR_CONFIG);
@@ -355,8 +406,15 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
BIT(6), RGMII_IO_MACRO_CONFIG);
rgmii_updatel(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
0, RGMII_IO_MACRO_CONFIG2);
- rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
- 0, RGMII_IO_MACRO_CONFIG2);
+
+ if (ethqos->has_emac3)
+ rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+ RGMII_CONFIG2_RX_PROG_SWAP,
+ RGMII_IO_MACRO_CONFIG2);
+ else
+ rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+ 0, RGMII_IO_MACRO_CONFIG2);
+
/* Write 0x5 to PRG_RCLK_DLY_CODE */
rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
(BIT(29) | BIT(27)), SDCC_HC_REG_DDR_CONFIG);
@@ -389,8 +447,13 @@ static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos)
RGMII_IO_MACRO_CONFIG);
rgmii_updatel(ethqos, RGMII_CONFIG2_RSVD_CONFIG15,
0, RGMII_IO_MACRO_CONFIG2);
- rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
- 0, RGMII_IO_MACRO_CONFIG2);
+ if (ethqos->has_emac3)
+ rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+ RGMII_CONFIG2_RX_PROG_SWAP,
+ RGMII_IO_MACRO_CONFIG2);
+ else
+ rgmii_updatel(ethqos, RGMII_CONFIG2_RX_PROG_SWAP,
+ 0, RGMII_IO_MACRO_CONFIG2);
/* Write 0x5 to PRG_RCLK_DLY_CODE */
rgmii_updatel(ethqos, SDCC_DDR_CONFIG_EXT_PRG_RCLK_DLY_CODE,
(BIT(29) | BIT(27)), SDCC_HC_REG_DDR_CONFIG);
@@ -433,6 +496,17 @@ static int ethqos_configure(struct qcom_ethqos *ethqos)
rgmii_updatel(ethqos, SDCC_DLL_CONFIG_PDN,
SDCC_DLL_CONFIG_PDN, SDCC_HC_REG_DLL_CONFIG);
+ if (ethqos->has_emac3) {
+ if (ethqos->speed == SPEED_1000) {
+ rgmii_writel(ethqos, 0x1800000, SDCC_TEST_CTL);
+ rgmii_writel(ethqos, 0x2C010800, SDCC_USR_CTL);
+ rgmii_writel(ethqos, 0xA001, SDCC_HC_REG_DLL_CONFIG2);
+ } else {
+ rgmii_writel(ethqos, 0x40010800, SDCC_USR_CTL);
+ rgmii_writel(ethqos, 0xA001, SDCC_HC_REG_DLL_CONFIG2);
+ }
+ }
+
/* Clear DLL_RST */
rgmii_updatel(ethqos, SDCC_DLL_CONFIG_DLL_RST, 0,
SDCC_HC_REG_DLL_CONFIG);
@@ -452,7 +526,9 @@ static int ethqos_configure(struct qcom_ethqos *ethqos)
SDCC_HC_REG_DLL_CONFIG);
/* Set USR_CTL bit 26 with mask of 3 bits */
- rgmii_updatel(ethqos, GENMASK(26, 24), BIT(26), SDCC_USR_CTL);
+ if (!ethqos->has_emac3)
+ rgmii_updatel(ethqos, GENMASK(26, 24), BIT(26),
+ SDCC_USR_CTL);
/* wait for DLL LOCK */
do {
@@ -547,6 +623,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
ethqos->por = data->por;
ethqos->num_por = data->num_por;
ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
+ ethqos->has_emac3 = data->has_emac3;
ethqos->rgmii_clk = devm_clk_get(&pdev->dev, "rgmii");
if (IS_ERR(ethqos->rgmii_clk)) {
@@ -566,6 +643,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
plat_dat->fix_mac_speed = ethqos_fix_mac_speed;
plat_dat->dump_debug_regs = rgmii_dump;
plat_dat->has_gmac4 = 1;
+ plat_dat->dwmac4_addrs = &data->dwmac4_addrs;
plat_dat->pmt = 1;
plat_dat->tso_en = of_property_read_bool(np, "snps,tso");
if (of_device_is_compatible(np, "qcom,qcs404-ethqos"))
@@ -603,6 +681,7 @@ static int qcom_ethqos_remove(struct platform_device *pdev)
static const struct of_device_id qcom_ethqos_match[] = {
{ .compatible = "qcom,qcs404-ethqos", .data = &emac_v2_3_0_data},
+ { .compatible = "qcom,sc8280xp-ethqos", .data = &emac_v3_0_0_data},
{ .compatible = "qcom,sm8150-ethqos", .data = &emac_v2_1_0_data},
{ }
};
Add the new programming sequence needed for EMAC3 based platforms such as the sc8280xp family. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> --- This originally did not make it to the list somehow, but was intended to. Apologies in advance if appending it like this is inappropriate, but after thinking about it more I think that works better than doing a RESEND (and making current comments difficult to track) or spinning a v4, without addressing comments in this version entirely. I'm eager to get some feedback on this, and I've got some property damage at home to deal with so I'm sending it this way instead of waiting for further advice on how to deal with me dropping it on accident. I know the Qualcomm team has looked at earlier versions of this offlist, but I'd appreciate any feedback I can get (good or bad) for this patch since it is a lot of programming that I took entirely from downstream after modifying to be more upstream appropriate (i.e., I do not have documentation for the IP, be it this implementation or the generic docs). Thanks in advance and sorry again about it getting dropped from the original submission! Changes since v2: * Adjust to the new method of defining the MTL/DMA offsets in the platform glue Changes since v1: * None .../stmicro/stmmac/dwmac-qcom-ethqos.c | 121 +++++++++++++++--- 1 file changed, 100 insertions(+), 21 deletions(-)