[1/3] dt-bindings: net: wireless: qcom,ath11k: allow describing radios

Commit Message

Rafał Miłecki April 14, 2023, 9:23 p.m. UTC

From: Rafał Miłecki <[e-mail]>

Qualcomm ath11k chipsets can have up to 3 radios. Each radio may need to
be additionally described by including its MAC or available frequency
ranges.

Signed-off-by: Rafał Miłecki <[e-mail]>
---
 .../bindings/net/wireless/qcom,ath11k.yaml    | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Rob Herring April 17, 2023, 1:10 p.m. UTC | #1

On Fri, 14 Apr 2023 23:23:54 +0200, Rafał Miłecki wrote:
> From: Rafał Miłecki <[e-mail]>
> 
> Qualcomm ath11k chipsets can have up to 3 radios. Each radio may need to
> be additionally described by including its MAC or available frequency
> ranges.
> 
> Signed-off-by: Rafał Miłecki <[e-mail]>
> ---
>  .../bindings/net/wireless/qcom,ath11k.yaml    | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: wifi@c000000: radio@0: Unevaluated properties are not allowed ('reg' was unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.example.dtb: wifi@c000000: '#address-cells', '#size-cells' do not match any of the regexes: '^radio@[0-2]$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[e-mail]

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index 7d5f982a3d09..ed660d563e09 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -78,6 +78,24 @@  properties:
     items:
       - const: wlan-smp2p-out
 
+patternProperties:
+  "^radio@[0-2]$":
+    type: object
+
+    allOf:
+      - $ref: ieee80211.yaml#
+
+    properties:
+      nvmem-cells:
+        items:
+          - description: NVMEM cell with the MAC address
+
+      nvmem-cell-names:
+        items:
+          - const: mac-address
+
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -378,6 +396,14 @@  examples:
                           "wbm2host-tx-completions-ring1",
                           "tcl2host-status-ring";
         qcom,rproc = <&q6v5_wcss>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        radio@0 {
+            reg = <0x0>;
+            nvmem-cells = <&mac>;
+            nvmem-cell-names = "mac-address";
+        };
     };
 
   - |