diff --git a/drivers/net/ethernet/intel/idpf/virtchnl2.h b/drivers/net/ethernet/intel/idpf/virtchnl2.h
new file mode 100644
index 000000000000..3a63c5136e83
--- /dev/null
+++ b/drivers/net/ethernet/intel/idpf/virtchnl2.h
@@ -0,0 +1,1317 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2023 Intel Corporation */
+
+#ifndef _VIRTCHNL2_H_
+#define _VIRTCHNL2_H_
+
+/* All opcodes associated with virtchnl 2 are prefixed with virtchnl2 or
+ * VIRTCHNL2. Any future opcodes, offloads/capabilities, structures,
+ * and defines must be prefixed with virtchnl2 or VIRTCHNL2 to avoid confusion.
+ *
+ * PF/VF uses the virtchnl interface defined in this header file to communicate
+ * with device Control Plane (CP). Driver and the CP may run on different
+ * platforms with different endianness. To avoid byte order discrepancies,
+ * struct members in this header follow little-endian format. Users of this
+ * virtchnl interface are expected to convert back to their native endian
+ * format.
+ *
+ * This is an interface definition file where existing enums and their values
+ * must remain unchanged over time, so we specify explicit values for all enums.
+ */
+
+#include "virtchnl2_lan_desc.h"
+
+/**
+ * enum virtchnl2_status - Error codes.
+ * @VIRTCHNL2_STATUS_SUCCESS: success
+ * @VIRTCHNL2_STATUS_ERR_EPERM: Operation not permitted, used in case of command
+ *				not permitted for sender.
+ * @VIRTCHNL2_STATUS_ERR_ESRCH: Bad opcode - virtchnl interface problem.
+ * @VIRTCHNL2_STATUS_ERR_EIO: I/O error - HW access error.
+ * @VIRTCHNL2_STATUS_ERR_ENXIO: No such resource - Referenced resource is not
+ *				allocated.
+ * @VIRTCHNL2_STATUS_ERR_EACCES: Permission denied - Resource is not permitted
+ *				to caller.
+ * @VIRTCHNL2_STATUS_ERR_EBUSY: Device or resource busy - In case shared
+ *				resource is in use by others.
+ * @VIRTCHNL2_STATUS_ERR_EEXIST: Object already exists and not free.
+ * @VIRTCHNL2_STATUS_ERR_EINVAL: Invalid input argument in command.
+ * @VIRTCHNL2_STATUS_ERR_ENOSPC: No space left or allocation failure.
+ * @VIRTCHNL2_STATUS_ERR_ERANGE: Parameter out of range.
+ * @VIRTCHNL2_STATUS_ERR_EMODE: Operation not allowed in current dev mode.
+ * @VIRTCHNL2_STATUS_ERR_ESM: State Machine error - Command sequence problem.
+ */
+enum virtchnl2_status {
+	VIRTCHNL2_STATUS_SUCCESS		= 0,
+	VIRTCHNL2_STATUS_ERR_EPERM		= 1,
+	VIRTCHNL2_STATUS_ERR_ESRCH		= 3,
+	VIRTCHNL2_STATUS_ERR_EIO		= 5,
+	VIRTCHNL2_STATUS_ERR_ENXIO		= 6,
+	VIRTCHNL2_STATUS_ERR_EACCES		= 13,
+	VIRTCHNL2_STATUS_ERR_EBUSY		= 16,
+	VIRTCHNL2_STATUS_ERR_EEXIST		= 17,
+	VIRTCHNL2_STATUS_ERR_EINVAL		= 22,
+	VIRTCHNL2_STATUS_ERR_ENOSPC		= 28,
+	VIRTCHNL2_STATUS_ERR_ERANGE		= 34,
+	VIRTCHNL2_STATUS_ERR_EMODE		= 200,
+	VIRTCHNL2_STATUS_ERR_ESM		= 201,
+};
+/* This macro is used to generate compilation errors if a structure
+ * is not exactly the correct length.
+ */
+#define VIRTCHNL2_CHECK_STRUCT_LEN(n, X)	\
+	static_assert((n) == sizeof(struct X))
+
+/* New major set of opcodes introduced and so leaving room for
+ * old misc opcodes to be added in future. Also these opcodes may only
+ * be used if both the PF and VF have successfully negotiated the
+ * VIRTCHNL version as 2.0 during VIRTCHNL2_OP_VERSION exchange.
+ */
+enum virtchnl2_op {
+	VIRTCHNL2_OP_UNKNOWN			= 0,
+	VIRTCHNL2_OP_VERSION			= 1,
+	VIRTCHNL2_OP_GET_CAPS			= 500,
+	VIRTCHNL2_OP_CREATE_VPORT		= 501,
+	VIRTCHNL2_OP_DESTROY_VPORT		= 502,
+	VIRTCHNL2_OP_ENABLE_VPORT		= 503,
+	VIRTCHNL2_OP_DISABLE_VPORT		= 504,
+	VIRTCHNL2_OP_CONFIG_TX_QUEUES		= 505,
+	VIRTCHNL2_OP_CONFIG_RX_QUEUES		= 506,
+	VIRTCHNL2_OP_ENABLE_QUEUES		= 507,
+	VIRTCHNL2_OP_DISABLE_QUEUES		= 508,
+	VIRTCHNL2_OP_ADD_QUEUES			= 509,
+	VIRTCHNL2_OP_DEL_QUEUES			= 510,
+	VIRTCHNL2_OP_MAP_QUEUE_VECTOR		= 511,
+	VIRTCHNL2_OP_UNMAP_QUEUE_VECTOR		= 512,
+	VIRTCHNL2_OP_GET_RSS_KEY		= 513,
+	VIRTCHNL2_OP_SET_RSS_KEY		= 514,
+	VIRTCHNL2_OP_GET_RSS_LUT		= 515,
+	VIRTCHNL2_OP_SET_RSS_LUT		= 516,
+	VIRTCHNL2_OP_GET_RSS_HASH		= 517,
+	VIRTCHNL2_OP_SET_RSS_HASH		= 518,
+	VIRTCHNL2_OP_SET_SRIOV_VFS		= 519,
+	VIRTCHNL2_OP_ALLOC_VECTORS		= 520,
+	VIRTCHNL2_OP_DEALLOC_VECTORS		= 521,
+	VIRTCHNL2_OP_EVENT			= 522,
+	VIRTCHNL2_OP_GET_STATS			= 523,
+	VIRTCHNL2_OP_RESET_VF			= 524,
+	VIRTCHNL2_OP_GET_EDT_CAPS		= 525,
+	VIRTCHNL2_OP_GET_PTYPE_INFO		= 526,
+	/* Opcode 527 and 528 are reserved for VIRTCHNL2_OP_GET_PTYPE_ID and
+	 * VIRTCHNL2_OP_GET_PTYPE_INFO_RAW.
+	 * Opcodes 529, 530, 531, 532 and 533 are reserved.
+	 */
+	VIRTCHNL2_OP_LOOPBACK			= 534,
+	VIRTCHNL2_OP_ADD_MAC_ADDR		= 535,
+	VIRTCHNL2_OP_DEL_MAC_ADDR		= 536,
+	VIRTCHNL2_OP_CONFIG_PROMISCUOUS_MODE	= 537,
+};
+
+/**
+ * enum virtchnl2_vport_type - Type of virtual port.
+ * @VIRTCHNL2_VPORT_TYPE_DEFAULT: Default virtual port type.
+ */
+enum virtchnl2_vport_type {
+	VIRTCHNL2_VPORT_TYPE_DEFAULT		= 0,
+};
+
+/**
+ * enum virtchnl2_queue_model - Type of queue model.
+ * @VIRTCHNL2_QUEUE_MODEL_SINGLE: Single queue model.
+ * @VIRTCHNL2_QUEUE_MODEL_SPLIT: Split queue model.
+ *
+ * In the single queue model, the same transmit descriptor queue is used by
+ * software to post descriptors to hardware and by hardware to post completed
+ * descriptors to software.
+ * Likewise, the same receive descriptor queue is used by hardware to post
+ * completions to software and by software to post buffers to hardware.
+ *
+ * In the split queue model, hardware uses transmit completion queues to post
+ * descriptor/buffer completions to software, while software uses transmit
+ * descriptor queues to post descriptors to hardware.
+ * Likewise, hardware posts descriptor completions to the receive descriptor
+ * queue, while software uses receive buffer queues to post buffers to hardware.
+ */
+enum virtchnl2_queue_model {
+	VIRTCHNL2_QUEUE_MODEL_SINGLE		= 0,
+	VIRTCHNL2_QUEUE_MODEL_SPLIT		= 1,
+};
+
+/* Checksum offload capability flags */
+enum virtchnl2_cap_txrx_csum {
+	VIRTCHNL2_CAP_TX_CSUM_L3_IPV4		= BIT(0),
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_TCP	= BIT(1),
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_UDP	= BIT(2),
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV4_SCTP	= BIT(3),
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_TCP	= BIT(4),
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_UDP	= BIT(5),
+	VIRTCHNL2_CAP_TX_CSUM_L4_IPV6_SCTP	= BIT(6),
+	VIRTCHNL2_CAP_TX_CSUM_GENERIC		= BIT(7),
+	VIRTCHNL2_CAP_RX_CSUM_L3_IPV4		= BIT(8),
+	VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_TCP	= BIT(9),
+	VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_UDP	= BIT(10),
+	VIRTCHNL2_CAP_RX_CSUM_L4_IPV4_SCTP	= BIT(11),
+	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_TCP	= BIT(12),
+	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_UDP	= BIT(13),
+	VIRTCHNL2_CAP_RX_CSUM_L4_IPV6_SCTP	= BIT(14),
+	VIRTCHNL2_CAP_RX_CSUM_GENERIC		= BIT(15),
+	VIRTCHNL2_CAP_TX_CSUM_L3_SINGLE_TUNNEL	= BIT(16),
+	VIRTCHNL2_CAP_TX_CSUM_L3_DOUBLE_TUNNEL	= BIT(17),
+	VIRTCHNL2_CAP_RX_CSUM_L3_SINGLE_TUNNEL	= BIT(18),
+	VIRTCHNL2_CAP_RX_CSUM_L3_DOUBLE_TUNNEL	= BIT(19),
+	VIRTCHNL2_CAP_TX_CSUM_L4_SINGLE_TUNNEL	= BIT(20),
+	VIRTCHNL2_CAP_TX_CSUM_L4_DOUBLE_TUNNEL	= BIT(21),
+	VIRTCHNL2_CAP_RX_CSUM_L4_SINGLE_TUNNEL	= BIT(22),
+	VIRTCHNL2_CAP_RX_CSUM_L4_DOUBLE_TUNNEL	= BIT(23),
+};
+
+/* Segmentation offload capability flags */
+enum virtchnl2_cap_seg {
+	VIRTCHNL2_CAP_SEG_IPV4_TCP		= BIT(0),
+	VIRTCHNL2_CAP_SEG_IPV4_UDP		= BIT(1),
+	VIRTCHNL2_CAP_SEG_IPV4_SCTP		= BIT(2),
+	VIRTCHNL2_CAP_SEG_IPV6_TCP		= BIT(3),
+	VIRTCHNL2_CAP_SEG_IPV6_UDP		= BIT(4),
+	VIRTCHNL2_CAP_SEG_IPV6_SCTP		= BIT(5),
+	VIRTCHNL2_CAP_SEG_GENERIC		= BIT(6),
+	VIRTCHNL2_CAP_SEG_TX_SINGLE_TUNNEL	= BIT(7),
+	VIRTCHNL2_CAP_SEG_TX_DOUBLE_TUNNEL	= BIT(8),
+};
+
+/* Receive Side Scaling Flow type capability flags */
+enum virtcnl2_cap_rss {
+	VIRTCHNL2_CAP_RSS_IPV4_TCP		= BIT(0),
+	VIRTCHNL2_CAP_RSS_IPV4_UDP		= BIT(1),
+	VIRTCHNL2_CAP_RSS_IPV4_SCTP		= BIT(2),
+	VIRTCHNL2_CAP_RSS_IPV4_OTHER		= BIT(3),
+	VIRTCHNL2_CAP_RSS_IPV6_TCP		= BIT(4),
+	VIRTCHNL2_CAP_RSS_IPV6_UDP		= BIT(5),
+	VIRTCHNL2_CAP_RSS_IPV6_SCTP		= BIT(6),
+	VIRTCHNL2_CAP_RSS_IPV6_OTHER		= BIT(7),
+	VIRTCHNL2_CAP_RSS_IPV4_AH		= BIT(8),
+	VIRTCHNL2_CAP_RSS_IPV4_ESP		= BIT(9),
+	VIRTCHNL2_CAP_RSS_IPV4_AH_ESP		= BIT(10),
+	VIRTCHNL2_CAP_RSS_IPV6_AH		= BIT(11),
+	VIRTCHNL2_CAP_RSS_IPV6_ESP		= BIT(12),
+	VIRTCHNL2_CAP_RSS_IPV6_AH_ESP		= BIT(13),
+};
+
+/* Header split capability flags */
+enum virtchnl2_cap_rx_hsplit_at {
+	/* for prepended metadata  */
+	VIRTCHNL2_CAP_RX_HSPLIT_AT_L2		= BIT(0),
+	/* all VLANs go into header buffer */
+	VIRTCHNL2_CAP_RX_HSPLIT_AT_L3		= BIT(1),
+	VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V4		= BIT(2),
+	VIRTCHNL2_CAP_RX_HSPLIT_AT_L4V6		= BIT(3),
+};
+
+/* Receive Side Coalescing offload capability flags */
+enum virtchnl2_cap_rsc {
+	VIRTCHNL2_CAP_RSC_IPV4_TCP		= BIT(0),
+	VIRTCHNL2_CAP_RSC_IPV4_SCTP		= BIT(1),
+	VIRTCHNL2_CAP_RSC_IPV6_TCP		= BIT(2),
+	VIRTCHNL2_CAP_RSC_IPV6_SCTP		= BIT(3),
+};
+
+/* Other capability flags */
+enum virtchnl2_cap_other {
+	VIRTCHNL2_CAP_RDMA			= BIT_ULL(0),
+	VIRTCHNL2_CAP_SRIOV			= BIT_ULL(1),
+	VIRTCHNL2_CAP_MACFILTER			= BIT_ULL(2),
+	VIRTCHNL2_CAP_FLOW_DIRECTOR		= BIT_ULL(3),
+	/* Queue based scheduling using split queue model */
+	VIRTCHNL2_CAP_SPLITQ_QSCHED		= BIT_ULL(4),
+	VIRTCHNL2_CAP_CRC			= BIT_ULL(5),
+	VIRTCHNL2_CAP_ADQ			= BIT_ULL(6),
+	VIRTCHNL2_CAP_WB_ON_ITR			= BIT_ULL(7),
+	VIRTCHNL2_CAP_PROMISC			= BIT_ULL(8),
+	VIRTCHNL2_CAP_LINK_SPEED		= BIT_ULL(9),
+	VIRTCHNL2_CAP_INLINE_IPSEC		= BIT_ULL(10),
+	VIRTCHNL2_CAP_LARGE_NUM_QUEUES		= BIT_ULL(11),
+	VIRTCHNL2_CAP_VLAN			= BIT_ULL(12),
+	VIRTCHNL2_CAP_PTP			= BIT_ULL(13),
+	/* EDT: Earliest Departure Time capability used for Timing Wheel */
+	VIRTCHNL2_CAP_EDT			= BIT_ULL(14),
+	VIRTCHNL2_CAP_ADV_RSS			= BIT_ULL(15),
+	VIRTCHNL2_CAP_FDIR			= BIT_ULL(16),
+	VIRTCHNL2_CAP_RX_FLEX_DESC		= BIT_ULL(17),
+	VIRTCHNL2_CAP_PTYPE			= BIT_ULL(18),
+	VIRTCHNL2_CAP_LOOPBACK			= BIT_ULL(19),
+	/* Enable miss completion types plus ability to detect a miss completion if a
+	 * reserved bit is set in a standared completion's tag.
+	 */
+	VIRTCHNL2_CAP_MISS_COMPL_TAG		= BIT_ULL(20),
+	/* this must be the last capability */
+	VIRTCHNL2_CAP_OEM			= BIT_ULL(63),
+};
+
+/* underlying device type */
+enum virtchl2_device_type {
+	VIRTCHNL2_MEV_DEVICE			= 0,
+};
+
+/**
+ * enum virtcnl2_txq_sched_mode - Transmit Queue Scheduling Modes.
+ * @VIRTCHNL2_TXQ_SCHED_MODE_QUEUE: Queue mode is the legacy mode i.e. inorder
+ *				    completions where descriptors and buffers
+ *				    are completed at the same time.
+ * @VIRTCHNL2_TXQ_SCHED_MODE_FLOW: Flow scheduling mode allows for out of order
+ *				   packet processing where descriptors are
+ *				   cleaned in order, but buffers can be
+ *				   completed out of order.
+ */
+enum virtcnl2_txq_sched_mode {
+	VIRTCHNL2_TXQ_SCHED_MODE_QUEUE		= 0,
+	VIRTCHNL2_TXQ_SCHED_MODE_FLOW		= 1,
+};
+
+/**
+ * enum virtchnl2_txq_flags - Tx Queue feature flags.
+ * @VIRTCHNL2_TXQ_ENABLE_MISS_COMPL: Enable rule miss completion type. Packet
+ *				     completion for a packet sent on exception
+ *				     path. Only relevant in flow scheduling mode.
+ */
+enum virtchnl2_txq_flags {
+	VIRTCHNL2_TXQ_ENABLE_MISS_COMPL		= BIT(0),
+};
+
+/**
+ * enum virtchnl2_rxq_flags - Receive Queue Feature flags.
+ * @VIRTCHNL2_RXQ_RSC: Rx queue RSC flag.
+ * @VIRTCHNL2_RXQ_HDR_SPLIT: Rx queue header split flag.
+ * @VIRTCHNL2_RXQ_IMMEDIATE_WRITE_BACK: When set, packet descriptors are flushed
+ *					by hardware immediately after processing
+ *					each packet.
+ * @VIRTCHNL2_RX_DESC_SIZE_16BYTE: Rx queue 16 byte descriptor size.
+ * @VIRTCHNL2_RX_DESC_SIZE_32BYTE: Rx queue 32 byte descriptor size.
+ */
+enum virtchnl2_rxq_flags {
+	VIRTCHNL2_RXQ_RSC			= BIT(0),
+	VIRTCHNL2_RXQ_HDR_SPLIT			= BIT(1),
+	VIRTCHNL2_RXQ_IMMEDIATE_WRITE_BACK	= BIT(2),
+	VIRTCHNL2_RX_DESC_SIZE_16BYTE		= BIT(3),
+	VIRTCHNL2_RX_DESC_SIZE_32BYTE		= BIT(4),
+};
+
+/* Type of RSS algorithm */
+enum virtcnl2_rss_alg {
+	VIRTCHNL2_RSS_ALG_TOEPLITZ_ASYMMETRIC	= 0,
+	VIRTCHNL2_RSS_ALG_R_ASYMMETRIC		= 1,
+	VIRTCHNL2_RSS_ALG_TOEPLITZ_SYMMETRIC	= 2,
+	VIRTCHNL2_RSS_ALG_XOR_SYMMETRIC		= 3,
+};
+
+/* Type of event */
+enum virtchnl2_event_codes {
+	VIRTCHNL2_EVENT_UNKNOWN			= 0,
+	VIRTCHNL2_EVENT_LINK_CHANGE		= 1,
+	/* Event type 2, 3 are reserved */
+};
+
+/* Transmit and Receive queue types are valid in legacy as well as split queue
+ * models. With Split Queue model, 2 additional types are introduced -
+ * TX_COMPLETION and RX_BUFFER. In split queue model, receive  corresponds to
+ * the queue where hardware posts completions.
+ */
+enum virtchnl2_queue_type {
+	VIRTCHNL2_QUEUE_TYPE_TX			= 0,
+	VIRTCHNL2_QUEUE_TYPE_RX			= 1,
+	VIRTCHNL2_QUEUE_TYPE_TX_COMPLETION	= 2,
+	VIRTCHNL2_QUEUE_TYPE_RX_BUFFER		= 3,
+	VIRTCHNL2_QUEUE_TYPE_CONFIG_TX		= 4,
+	VIRTCHNL2_QUEUE_TYPE_CONFIG_RX		= 5,
+	/* Queue types 6, 7, 8, 9 are reserved */
+	VIRTCHNL2_QUEUE_TYPE_MBX_TX		= 10,
+	VIRTCHNL2_QUEUE_TYPE_MBX_RX		= 11,
+};
+
+/* Interrupt throttling rate index */
+enum virtchnl2_itr_idx {
+	VIRTCHNL2_ITR_IDX_0			= 0,
+	VIRTCHNL2_ITR_IDX_1			= 1,
+};
+
+/**
+ * enum virtchnl2_mac_addr_type - MAC address types.
+ * @VIRTCHNL2_MAC_ADDR_PRIMARY: PF/VF driver should set this type for the
+ *				primary/device unicast MAC address filter for
+ *				VIRTCHNL2_OP_ADD_MAC_ADDR and VIRTCHNL2_OP_DEL_MAC_ADDR.
+ *				This allows for the underlying control plane
+ *				function to accurately track the MAC address and for
+ *				VM/function reset.
+ *
+ * @VIRTCHNL2_MAC_ADDR_EXTRA: PF/VF driver should set this type for any extra unicast
+ *			      and/or multicast filters that are being added/deleted via
+ *			      VIRTCHNL2_OP_ADD_MAC_ADDR or VIRTCHNL2_OP_DEL_MAC_ADDR.
+ */
+enum virtchnl2_mac_addr_type {
+	VIRTCHNL2_MAC_ADDR_PRIMARY		= 1,
+	VIRTCHNL2_MAC_ADDR_EXTRA		= 2,
+};
+
+/* Flags used for promiscuous mode */
+enum virtchnl2_promisc_flags {
+	VIRTCHNL2_UNICAST_PROMISC		= BIT(0),
+	VIRTCHNL2_MULTICAST_PROMISC		= BIT(1),
+};
+
+/* Protocol header type within a packet segment. A segment consists of one or
+ * more protocol headers that make up a logical group of protocol headers. Each
+ * logical group of protocol headers encapsulates or is encapsulated using/by
+ * tunneling or encapsulation protocols for network virtualization.
+ */
+enum virtchnl2_proto_hdr_type {
+	/* VIRTCHNL2_PROTO_HDR_ANY is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_ANY			= 0,
+	VIRTCHNL2_PROTO_HDR_PRE_MAC		= 1,
+	/* VIRTCHNL2_PROTO_HDR_MAC is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_MAC			= 2,
+	VIRTCHNL2_PROTO_HDR_POST_MAC		= 3,
+	VIRTCHNL2_PROTO_HDR_ETHERTYPE		= 4,
+	VIRTCHNL2_PROTO_HDR_VLAN		= 5,
+	VIRTCHNL2_PROTO_HDR_SVLAN		= 6,
+	VIRTCHNL2_PROTO_HDR_CVLAN		= 7,
+	VIRTCHNL2_PROTO_HDR_MPLS		= 8,
+	VIRTCHNL2_PROTO_HDR_UMPLS		= 9,
+	VIRTCHNL2_PROTO_HDR_MMPLS		= 10,
+	VIRTCHNL2_PROTO_HDR_PTP			= 11,
+	VIRTCHNL2_PROTO_HDR_CTRL		= 12,
+	VIRTCHNL2_PROTO_HDR_LLDP		= 13,
+	VIRTCHNL2_PROTO_HDR_ARP			= 14,
+	VIRTCHNL2_PROTO_HDR_ECP			= 15,
+	VIRTCHNL2_PROTO_HDR_EAPOL		= 16,
+	VIRTCHNL2_PROTO_HDR_PPPOD		= 17,
+	VIRTCHNL2_PROTO_HDR_PPPOE		= 18,
+	/* VIRTCHNL2_PROTO_HDR_IPV4 is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_IPV4		= 19,
+	/* IPv4 and IPv6 Fragment header types are only associated to
+	 * VIRTCHNL2_PROTO_HDR_IPV4 and VIRTCHNL2_PROTO_HDR_IPV6 respectively,
+	 * cannot be used independently.
+	 */
+	/* VIRTCHNL2_PROTO_HDR_IPV4_FRAG is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_IPV4_FRAG		= 20,
+	/* VIRTCHNL2_PROTO_HDR_IPV6 is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_IPV6		= 21,
+	/* VIRTCHNL2_PROTO_HDR_IPV6_FRAG is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_IPV6_FRAG		= 22,
+	VIRTCHNL2_PROTO_HDR_IPV6_EH		= 23,
+	/* VIRTCHNL2_PROTO_HDR_UDP is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_UDP			= 24,
+	/* VIRTCHNL2_PROTO_HDR_TCP is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_TCP			= 25,
+	/* VIRTCHNL2_PROTO_HDR_SCTP is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_SCTP		= 26,
+	/* VIRTCHNL2_PROTO_HDR_ICMP is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_ICMP		= 27,
+	/* VIRTCHNL2_PROTO_HDR_ICMPV6 is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_ICMPV6		= 28,
+	VIRTCHNL2_PROTO_HDR_IGMP		= 29,
+	VIRTCHNL2_PROTO_HDR_AH			= 30,
+	VIRTCHNL2_PROTO_HDR_ESP			= 31,
+	VIRTCHNL2_PROTO_HDR_IKE			= 32,
+	VIRTCHNL2_PROTO_HDR_NATT_KEEP		= 33,
+	/* VIRTCHNL2_PROTO_HDR_PAY is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_PAY			= 34,
+	VIRTCHNL2_PROTO_HDR_L2TPV2		= 35,
+	VIRTCHNL2_PROTO_HDR_L2TPV2_CONTROL	= 36,
+	VIRTCHNL2_PROTO_HDR_L2TPV3		= 37,
+	VIRTCHNL2_PROTO_HDR_GTP			= 38,
+	VIRTCHNL2_PROTO_HDR_GTP_EH		= 39,
+	VIRTCHNL2_PROTO_HDR_GTPCV2		= 40,
+	VIRTCHNL2_PROTO_HDR_GTPC_TEID		= 41,
+	VIRTCHNL2_PROTO_HDR_GTPU		= 42,
+	VIRTCHNL2_PROTO_HDR_GTPU_UL		= 43,
+	VIRTCHNL2_PROTO_HDR_GTPU_DL		= 44,
+	VIRTCHNL2_PROTO_HDR_ECPRI		= 45,
+	VIRTCHNL2_PROTO_HDR_VRRP		= 46,
+	VIRTCHNL2_PROTO_HDR_OSPF		= 47,
+	/* VIRTCHNL2_PROTO_HDR_TUN is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_TUN			= 48,
+	VIRTCHNL2_PROTO_HDR_GRE			= 49,
+	VIRTCHNL2_PROTO_HDR_NVGRE		= 50,
+	VIRTCHNL2_PROTO_HDR_VXLAN		= 51,
+	VIRTCHNL2_PROTO_HDR_VXLAN_GPE		= 52,
+	VIRTCHNL2_PROTO_HDR_GENEVE		= 53,
+	VIRTCHNL2_PROTO_HDR_NSH			= 54,
+	VIRTCHNL2_PROTO_HDR_QUIC		= 55,
+	VIRTCHNL2_PROTO_HDR_PFCP		= 56,
+	VIRTCHNL2_PROTO_HDR_PFCP_NODE		= 57,
+	VIRTCHNL2_PROTO_HDR_PFCP_SESSION	= 58,
+	VIRTCHNL2_PROTO_HDR_RTP			= 59,
+	VIRTCHNL2_PROTO_HDR_ROCE		= 60,
+	VIRTCHNL2_PROTO_HDR_ROCEV1		= 61,
+	VIRTCHNL2_PROTO_HDR_ROCEV2		= 62,
+	/* protocol ids up to 32767 are reserved for AVF use */
+	/* 32768 - 65534 are used for user defined protocol ids */
+	/* VIRTCHNL2_PROTO_HDR_NO_PROTO is a mandatory protocol id */
+	VIRTCHNL2_PROTO_HDR_NO_PROTO		= 65535,
+};
+
+enum virtchl2_version {
+	VIRTCHNL2_VERSION_MINOR_0		= 0,
+	VIRTCHNL2_VERSION_MAJOR_2		= 2,
+};
+
+/**
+ * struct virtchnl2_edt_caps - Get EDT granularity and time horizon.
+ * @tstamp_granularity_ns: Timestamp granularity in nanoseconds.
+ * @time_horizon_ns: Total time window in nanoseconds.
+ *
+ * Associated with VIRTCHNL2_OP_GET_EDT_CAPS.
+ */
+struct virtchnl2_edt_caps {
+	__le64 tstamp_granularity_ns;
+	__le64 time_horizon_ns;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_edt_caps);
+
+/**
+ * struct virtchnl2_version_info - Version information.
+ * @major: Major version.
+ * @minor: Minor version.
+ *
+ * PF/VF posts its version number to the CP. CP responds with its version number
+ * in the same format, along with a return code.
+ * If there is a major version mismatch, then the PF/VF cannot operate.
+ * If there is a minor version mismatch, then the PF/VF can operate but should
+ * add a warning to the system log.
+ *
+ * This version opcode MUST always be specified as == 1, regardless of other
+ * changes in the API. The CP must always respond to this message without
+ * error regardless of version mismatch.
+ *
+ * Associated with VIRTCHNL2_OP_VERSION.
+ */
+struct virtchnl2_version_info {
+	__le32 major;
+	__le32 minor;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_version_info);
+
+/**
+ * struct virtchnl2_get_capabilities - Capabilities info.
+ * @csum_caps: See enum virtchnl2_cap_txrx_csum.
+ * @seg_caps: See enum virtchnl2_cap_seg.
+ * @hsplit_caps: See enum virtchnl2_cap_rx_hsplit_at.
+ * @rsc_caps: See enum virtchnl2_cap_rsc.
+ * @rss_caps: See enum virtcnl2_cap_rss.
+ * @other_caps: See enum virtchnl2_cap_other.
+ * @mailbox_dyn_ctl: DYN_CTL register offset and vector id for mailbox provided by CP.
+ * @mailbox_vector_id: Mailbox vector id.
+ * @num_allocated_vectors: Maximum number of allocated vectors for the device.
+ * @max_rx_q: Maximum number of supported Rx queues.
+ * @max_tx_q: Maximum number of supported Tx queues.
+ * @max_rx_bufq: Maximum number of supported buffer queues.
+ * @max_tx_complq: Maximum number of supported completion queues.
+ * @max_sriov_vfs: The PF sends the maximum VFs it is requesting. The CP
+ *		   responds with the maximum VFs granted.
+ * @max_vports: Maximum number of vports that can be supported.
+ * @default_num_vports: Default number of vports driver should allocate on load.
+ * @max_tx_hdr_size: Max header length hardware can parse/checksum, in bytes.
+ * @max_sg_bufs_per_tx_pkt: Max number of scatter gather buffers that can be sent
+ *			    per transmit packet without needing to be linearized.
+ * @pad: Padding.
+ * @reserved: Reserved.
+ * @device_type: See enum virtchl2_device_type.
+ * @min_sso_packet_len: Min packet length supported by device for single
+ *			segment offload.
+ * @max_hdr_buf_per_lso: Max number of header buffers that can be used for an LSO.
+ * @pad1: Padding for future extensions.
+ *
+ * Dataplane driver sends this message to CP to negotiate capabilities and
+ * provides a virtchnl2_get_capabilities structure with its desired
+ * capabilities, max_sriov_vfs and num_allocated_vectors.
+ * CP responds with a virtchnl2_get_capabilities structure updated
+ * with allowed capabilities and the other fields as below.
+ * If PF sets max_sriov_vfs as 0, CP will respond with max number of VFs
+ * that can be created by this PF. For any other value 'n', CP responds
+ * with max_sriov_vfs set to min(n, x) where x is the max number of VFs
+ * allowed by CP's policy. max_sriov_vfs is not applicable for VFs.
+ * If dataplane driver sets num_allocated_vectors as 0, CP will respond with 1
+ * which is default vector associated with the default mailbox. For any other
+ * value 'n', CP responds with a value <= n based on the CP's policy of
+ * max number of vectors for a PF.
+ * CP will respond with the vector ID of mailbox allocated to the PF in
+ * mailbox_vector_id and the number of itr index registers in itr_idx_map.
+ * It also responds with default number of vports that the dataplane driver
+ * should comeup with in default_num_vports and maximum number of vports that
+ * can be supported in max_vports.
+ *
+ * Associated with VIRTCHNL2_OP_GET_CAPS.
+ */
+struct virtchnl2_get_capabilities {
+	__le32 csum_caps;
+	__le32 seg_caps;
+	__le32 hsplit_caps;
+	__le32 rsc_caps;
+	__le64 rss_caps;
+	__le64 other_caps;
+	__le32 mailbox_dyn_ctl;
+	__le16 mailbox_vector_id;
+	__le16 num_allocated_vectors;
+	__le16 max_rx_q;
+	__le16 max_tx_q;
+	__le16 max_rx_bufq;
+	__le16 max_tx_complq;
+	__le16 max_sriov_vfs;
+	__le16 max_vports;
+	__le16 default_num_vports;
+	__le16 max_tx_hdr_size;
+	u8 max_sg_bufs_per_tx_pkt;
+	u8 pad[3];
+	u8 reserved[4];
+	__le32 device_type;
+	u8 min_sso_packet_len;
+	u8 max_hdr_buf_per_lso;
+	u8 pad1[10];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(80, virtchnl2_get_capabilities);
+
+/**
+ * struct virtchnl2_queue_reg_chunk - Single queue chunk.
+ * @type: See enum virtchnl2_queue_type.
+ * @start_queue_id: Start Queue ID.
+ * @num_queues: Number of queues in the chunk.
+ * @pad: Padding.
+ * @qtail_reg_start: Queue tail register offset.
+ * @qtail_reg_spacing: Queue tail register spacing.
+ * @pad1: Padding for future extensions.
+ */
+struct virtchnl2_queue_reg_chunk {
+	__le32 type;
+	__le32 start_queue_id;
+	__le32 num_queues;
+	__le32 pad;
+	__le64 qtail_reg_start;
+	__le32 qtail_reg_spacing;
+	u8 pad1[4];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_queue_reg_chunk);
+
+/**
+ *  struct virtchnl2_queue_reg_chunks - Specify several chunks of contiguous queues.
+ *  @num_chunks: Number of chunks.
+ *  @pad: Padding.
+ *  @chunks: Chunks of queue info.
+ */
+struct virtchnl2_queue_reg_chunks {
+	__le16 num_chunks;
+	u8 pad[6];
+	struct virtchnl2_queue_reg_chunk chunks[];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_queue_reg_chunks);
+
+/**
+ * struct virtchnl2_create_vport - Create vport config info.
+ * @vport_type: See enum virtchnl2_vport_type.
+ * @txq_model: See virtchnl2_queue_model.
+ * @rxq_model: See virtchnl2_queue_model.
+ * @num_tx_q: Number of Tx queues.
+ * @num_tx_complq: Valid only if txq_model is split queue.
+ * @num_rx_q: Number of Rx queues.
+ * @num_rx_bufq: Valid only if rxq_model is split queue.
+ * @default_rx_q: Relative receive queue index to be used as default.
+ * @vport_index: Used to align PF and CP in case of default multiple vports,
+ *		 it is filled by the PF and CP returns the same value, to
+ *		 enable the driver to support multiple asynchronous parallel
+ *		 CREATE_VPORT requests and associate a response to a specific
+ *		 request.
+ * @max_mtu: Max MTU. CP populates this field on response.
+ * @vport_id: Vport id. CP populates this field on response.
+ * @default_mac_addr: Default MAC address.
+ * @pad: Padding.
+ * @rx_desc_ids: See VIRTCHNL2_RX_DESC_IDS definitions.
+ * @tx_desc_ids: See VIRTCHNL2_TX_DESC_IDS definitions.
+ * @pad1: Padding.
+ * @rss_algorithm: RSS algorithm.
+ * @rss_key_size: RSS key size.
+ * @rss_lut_size: RSS LUT size.
+ * @rx_split_pos: See enum virtchnl2_cap_rx_hsplit_at.
+ * @pad2: Padding.
+ * @chunks: Chunks of contiguous queues.
+ *
+ * PF sends this message to CP to create a vport by filling in required
+ * fields of virtchnl2_create_vport structure.
+ * CP responds with the updated virtchnl2_create_vport structure containing the
+ * necessary fields followed by chunks which in turn will have an array of
+ * num_chunks entries of virtchnl2_queue_chunk structures.
+ *
+ * Associated with VIRTCHNL2_OP_CREATE_VPORT.
+ */
+struct virtchnl2_create_vport {
+	__le16 vport_type;
+	__le16 txq_model;
+	__le16 rxq_model;
+	__le16 num_tx_q;
+	__le16 num_tx_complq;
+	__le16 num_rx_q;
+	__le16 num_rx_bufq;
+	__le16 default_rx_q;
+	__le16 vport_index;
+	/* CP populates the following fields on response */
+	__le16 max_mtu;
+	__le32 vport_id;
+	u8 default_mac_addr[ETH_ALEN];
+	__le16 pad;
+	__le64 rx_desc_ids;
+	__le64 tx_desc_ids;
+	u8 pad1[72];
+	__le32 rss_algorithm;
+	__le16 rss_key_size;
+	__le16 rss_lut_size;
+	__le32 rx_split_pos;
+	u8 pad2[20];
+	struct virtchnl2_queue_reg_chunks chunks;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(160, virtchnl2_create_vport);
+
+/**
+ * struct virtchnl2_vport - Vport ID info.
+ * @vport_id: Vport id.
+ * @pad: Padding for future extensions.
+ *
+ * PF sends this message to CP to destroy, enable or disable a vport by filling
+ * in the vport_id in virtchnl2_vport structure.
+ * CP responds with the status of the requested operation.
+ *
+ * Associated with VIRTCHNL2_OP_DESTROY_VPORT, VIRTCHNL2_OP_ENABLE_VPORT,
+ * VIRTCHNL2_OP_DISABLE_VPORT.
+ */
+struct virtchnl2_vport {
+	__le32 vport_id;
+	u8 pad[4];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_vport);
+
+/**
+ * struct virtchnl2_txq_info - Transmit queue config info
+ * @dma_ring_addr: DMA address.
+ * @type: See enum virtchnl2_queue_type.
+ * @queue_id: Queue ID.
+ * @relative_queue_id: Valid only if queue model is split and type is transmit
+ *		       queue. Used in many to one mapping of transmit queues to
+ *		       completion queue.
+ * @model: See enum virtchnl2_queue_model.
+ * @sched_mode: See enum virtcnl2_txq_sched_mode.
+ * @qflags: TX queue feature flags.
+ * @ring_len: Ring length.
+ * @tx_compl_queue_id: Valid only if queue model is split and type is transmit queue.
+ * @peer_type: Valid only if queue type is VIRTCHNL2_QUEUE_TYPE_MAILBOX_TX
+ *	       See enum virtchnl2_peer_type.
+ * @peer_rx_queue_id: Valid only if queue type is CONFIG_TX and used to deliver
+ *		      messages for the respective CONFIG_TX queue.
+ * @pad: Padding.
+ * @egress_pasid: Egress PASID info.
+ * @egress_hdr_pasid: Egress HDR passid.
+ * @egress_buf_pasid: Egress buf passid.
+ * @pad1: Padding for future extensions.
+ */
+struct virtchnl2_txq_info {
+	__le64 dma_ring_addr;
+	__le32 type;
+	__le32 queue_id;
+	__le16 relative_queue_id;
+	__le16 model;
+	__le16 sched_mode;
+	__le16 qflags;
+	__le16 ring_len;
+	__le16 tx_compl_queue_id;
+	__le16 peer_type;
+	__le16 peer_rx_queue_id;
+	u8 pad[4];
+	__le32 egress_pasid;
+	__le32 egress_hdr_pasid;
+	__le32 egress_buf_pasid;
+	u8 pad1[8];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(56, virtchnl2_txq_info);
+
+/**
+ * struct virtchnl2_config_tx_queues - TX queue config.
+ * @vport_id: Vport id.
+ * @num_qinfo: Number of virtchnl2_txq_info structs.
+ * @pad: Padding.
+ * @qinfo: Tx queues config info.
+ *
+ * PF sends this message to set up parameters for one or more transmit queues.
+ * This message contains an array of num_qinfo instances of virtchnl2_txq_info
+ * structures. CP configures requested queues and returns a status code. If
+ * num_qinfo specified is greater than the number of queues associated with the
+ * vport, an error is returned and no queues are configured.
+ *
+ * Associated with VIRTCHNL2_OP_CONFIG_TX_QUEUES.
+ */
+struct virtchnl2_config_tx_queues {
+	__le32 vport_id;
+	__le16 num_qinfo;
+	u8 pad[10];
+	struct virtchnl2_txq_info qinfo[];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_config_tx_queues);
+
+/**
+ * struct virtchnl2_rxq_info - Receive queue config info.
+ * @desc_ids: See VIRTCHNL2_RX_DESC_IDS definitions.
+ * @dma_ring_addr: See VIRTCHNL2_RX_DESC_IDS definitions.
+ * @type: See enum virtchnl2_queue_type.
+ * @queue_id: Queue id.
+ * @model: See enum virtchnl2_queue_model.
+ * @hdr_buffer_size: Header buffer size.
+ * @data_buffer_size: Data buffer size.
+ * @max_pkt_size: Max packet size.
+ * @ring_len: Ring length.
+ * @buffer_notif_stride: Buffer notification stride in units of 32-descriptors.
+ *			 This field must be a power of 2.
+ * @pad: Padding.
+ * @dma_head_wb_addr: Applicable only for receive buffer queues.
+ * @qflags: Applicable only for receive completion queues.
+ *	    See enum virtchnl2_rxq_flags.
+ * @rx_buffer_low_watermark: Rx buffer low watermark.
+ * @rx_bufq1_id: Buffer queue index of the first buffer queue associated with
+ *		 the Rx queue. Valid only in split queue model.
+ * @rx_bufq2_id: Buffer queue index of the second buffer queue associated with
+ *		 the Rx queue. Valid only in split queue model.
+ * @bufq2_ena: It indicates if there is a second buffer, rx_bufq2_id is valid
+ *	       only if this field is set.
+ * @pad1: Padding.
+ * @ingress_pasid: Ingress PASID.
+ * @ingress_hdr_pasid: Ingress PASID header.
+ * @ingress_buf_pasid: Ingress PASID buffer.
+ * @pad2: Padding for future extensions.
+ */
+struct virtchnl2_rxq_info {
+	__le64 desc_ids;
+	__le64 dma_ring_addr;
+	__le32 type;
+	__le32 queue_id;
+	__le16 model;
+	__le16 hdr_buffer_size;
+	__le32 data_buffer_size;
+	__le32 max_pkt_size;
+	__le16 ring_len;
+	u8 buffer_notif_stride;
+	u8 pad;
+	__le64 dma_head_wb_addr;
+	__le16 qflags;
+	__le16 rx_buffer_low_watermark;
+	__le16 rx_bufq1_id;
+	__le16 rx_bufq2_id;
+	u8 bufq2_ena;
+	u8 pad1[3];
+	__le32 ingress_pasid;
+	__le32 ingress_hdr_pasid;
+	__le32 ingress_buf_pasid;
+	u8 pad2[16];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(88, virtchnl2_rxq_info);
+
+/**
+ * struct virtchnl2_config_rx_queues - Rx queues config.
+ * @vport_id: Vport id.
+ * @num_qinfo: Number of instances.
+ * @pad: Padding.
+ * @qinfo: Rx queues config info.
+ *
+ * PF sends this message to set up parameters for one or more receive queues.
+ * This message contains an array of num_qinfo instances of virtchnl2_rxq_info
+ * structures. CP configures requested queues and returns a status code.
+ * If the number of queues specified is greater than the number of queues
+ * associated with the vport, an error is returned and no queues are configured.
+ *
+ * Associated with VIRTCHNL2_OP_CONFIG_RX_QUEUES.
+ */
+struct virtchnl2_config_rx_queues {
+	__le32 vport_id;
+	__le16 num_qinfo;
+	u8 pad[18];
+	struct virtchnl2_rxq_info qinfo[];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_config_rx_queues);
+
+/**
+ * struct virtchnl2_add_queues - data for VIRTCHNL2_OP_ADD_QUEUES.
+ * @vport_id: Vport id.
+ * @num_tx_q: Number of Tx qieues.
+ * @num_tx_complq: Number of Tx completion queues.
+ * @num_rx_q:  Number of Rx queues.
+ * @num_rx_bufq:  Number of Rx buffer queues.
+ * @pad: Padding.
+ * @chunks: Chunks of contiguous queues.
+ *
+ * PF sends this message to request additional transmit/receive queues beyond
+ * the ones that were assigned via CREATE_VPORT request. virtchnl2_add_queues
+ * structure is used to specify the number of each type of queues.
+ * CP responds with the same structure with the actual number of queues assigned
+ * followed by num_chunks of virtchnl2_queue_chunk structures.
+ *
+ * Associated with VIRTCHNL2_OP_ADD_QUEUES.
+ */
+struct virtchnl2_add_queues {
+	__le32 vport_id;
+	__le16 num_tx_q;
+	__le16 num_tx_complq;
+	__le16 num_rx_q;
+	__le16 num_rx_bufq;
+	u8 pad[4];
+	struct virtchnl2_queue_reg_chunks chunks;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_add_queues);
+
+/**
+ * struct virtchnl2_vector_chunk - Structure to specify a chunk of contiguous
+ *				   interrupt vectors.
+ * @start_vector_id: Start vector id.
+ * @start_evv_id: Start EVV id.
+ * @num_vectors: Number of vectors.
+ * @pad: Padding.
+ * @dynctl_reg_start: DYN_CTL register offset.
+ * @dynctl_reg_spacing: register spacing between DYN_CTL registers of 2
+ *			consecutive vectors.
+ * @itrn_reg_start: ITRN register offset.
+ * @itrn_reg_spacing: Register spacing between dynctl registers of 2
+ *		      consecutive vectors.
+ * @itrn_index_spacing: Register spacing between itrn registers of the same
+ *			vector where n=0..2.
+ * @pad1: Padding for future extensions.
+ *
+ * Register offsets and spacing provided by CP.
+ * Dynamic control registers are used for enabling/disabling/re-enabling
+ * interrupts and updating interrupt rates in the hotpath. Any changes
+ * to interrupt rates in the dynamic control registers will be reflected
+ * in the interrupt throttling rate registers.
+ * itrn registers are used to update interrupt rates for specific
+ * interrupt indices without modifying the state of the interrupt.
+ */
+struct virtchnl2_vector_chunk {
+	__le16 start_vector_id;
+	__le16 start_evv_id;
+	__le16 num_vectors;
+	__le16 pad;
+	__le32 dynctl_reg_start;
+	__le32 dynctl_reg_spacing;
+	__le32 itrn_reg_start;
+	__le32 itrn_reg_spacing;
+	__le32 itrn_index_spacing;
+	u8 pad1[4];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_vector_chunk);
+
+/**
+ * struct virtchnl2_vector_chunks - chunks of contiguous interrupt vectors.
+ * @num_vchunks: number of vector chunks.
+ * @pad: Padding.
+ * @vchunks: Chunks of contiguous vector info.
+ *
+ * PF sends virtchnl2_vector_chunks struct to specify the vectors it is giving
+ * away. CP performs requested action and returns status.
+ *
+ * Associated with VIRTCHNL2_OP_DEALLOC_VECTORS.
+ */
+struct virtchnl2_vector_chunks {
+	__le16 num_vchunks;
+	u8 pad[14];
+	struct virtchnl2_vector_chunk vchunks[];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_vector_chunks);
+
+/**
+ * struct virtchnl2_alloc_vectors - vector allocation info.
+ * @num_vectors: Number of vectors.
+ * @pad: Padding.
+ * @vchunks: Chunks of contiguous vector info.
+ *
+ * PF sends this message to request additional interrupt vectors beyond the
+ * ones that were assigned via GET_CAPS request. virtchnl2_alloc_vectors
+ * structure is used to specify the number of vectors requested. CP responds
+ * with the same structure with the actual number of vectors assigned followed
+ * by virtchnl2_vector_chunks structure identifying the vector ids.
+ *
+ * Associated with VIRTCHNL2_OP_ALLOC_VECTORS.
+ */
+struct virtchnl2_alloc_vectors {
+	__le16 num_vectors;
+	u8 pad[14];
+	struct virtchnl2_vector_chunks vchunks;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(32, virtchnl2_alloc_vectors);
+
+/**
+ * struct virtchnl2_rss_lut - RSS LUT info.
+ * @vport_id: Vport id.
+ * @lut_entries_start: Start of LUT entries.
+ * @lut_entries: Number of LUT entrties.
+ * @pad: Padding.
+ * @lut: RSS lookup table.
+ *
+ * PF sends this message to get or set RSS lookup table. Only supported if
+ * both PF and CP drivers set the VIRTCHNL2_CAP_RSS bit during configuration
+ * negotiation.
+ *
+ * Associated with VIRTCHNL2_OP_GET_RSS_LUT and VIRTCHNL2_OP_SET_RSS_LUT.
+ */
+struct virtchnl2_rss_lut {
+	__le32 vport_id;
+	__le16 lut_entries_start;
+	__le16 lut_entries;
+	u8 pad[4];
+	__le32 lut[];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(12, virtchnl2_rss_lut);
+
+/**
+ * struct virtchnl2_rss_hash - RSS hash info.
+ * @ptype_groups: Packet type groups bitmap.
+ * @vport_id: Vport id.
+ * @pad: Padding for future extensions.
+ *
+ * PF sends these messages to get and set the hash filter enable bits for RSS.
+ * By default, the CP sets these to all possible traffic types that the
+ * hardware supports. The PF can query this value if it wants to change the
+ * traffic types that are hashed by the hardware.
+ * Only supported if both PF and CP drivers set the VIRTCHNL2_CAP_RSS bit
+ * during configuration negotiation.
+ *
+ * Associated with VIRTCHNL2_OP_GET_RSS_HASH and VIRTCHNL2_OP_SET_RSS_HASH
+ */
+struct virtchnl2_rss_hash {
+	__le64 ptype_groups;
+	__le32 vport_id;
+	u8 pad[4];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_rss_hash);
+
+/**
+ * struct virtchnl2_sriov_vfs_info - VFs info.
+ * @num_vfs: Number of VFs.
+ * @pad: Padding for future extensions.
+ *
+ * This message is used to set number of SRIOV VFs to be created. The actual
+ * allocation of resources for the VFs in terms of vport, queues and interrupts
+ * is done by CP. When this call completes, the IDPF driver calls
+ * pci_enable_sriov to let the OS instantiate the SRIOV PCIE devices.
+ * The number of VFs set to 0 will destroy all the VFs of this function.
+ *
+ * Associated with VIRTCHNL2_OP_SET_SRIOV_VFS.
+ */
+struct virtchnl2_sriov_vfs_info {
+	__le16 num_vfs;
+	__le16 pad;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(4, virtchnl2_sriov_vfs_info);
+
+/**
+ * struct virtchnl2_ptype - Packet type info.
+ * @ptype_id_10: 10-bit packet type.
+ * @ptype_id_8: 8-bit packet type.
+ * @proto_id_count: Number of protocol ids the packet supports, maximum of 32
+ *		    protocol ids are supported.
+ * @pad: Padding.
+ * @proto_id: proto_id_count decides the allocation of protocol id array.
+ *	      See enum virtchnl2_proto_hdr_type.
+ *
+ * Based on the descriptor type the PF supports, CP fills ptype_id_10 or
+ * ptype_id_8 for flex and base descriptor respectively. If ptype_id_10 value
+ * is set to 0xFFFF, PF should consider this ptype as dummy one and it is the
+ * last ptype.
+ */
+struct virtchnl2_ptype {
+	__le16 ptype_id_10;
+	u8 ptype_id_8;
+	u8 proto_id_count;
+	__le16 pad;
+	__le16 proto_id[];
+};
+
+VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype);
+
+/**
+ * struct virtchnl2_get_ptype_info - Packet type info.
+ * @start_ptype_id: Starting ptype ID.
+ * @num_ptypes: Number of packet types from start_ptype_id.
+ * @pad: Padding for future extensions.
+ *
+ * The total number of supported packet types is based on the descriptor type.
+ * For the flex descriptor, it is 1024 (10-bit ptype), and for the base
+ * descriptor, it is 256 (8-bit ptype). Send this message to the CP by
+ * populating the 'start_ptype_id' and the 'num_ptypes'. CP responds with the
+ * 'start_ptype_id', 'num_ptypes', and the array of ptype (virtchnl2_ptype) that
+ * are added at the end of the 'virtchnl2_get_ptype_info' message (Note: There
+ * is no specific field for the ptypes but are added at the end of the
+ * ptype info message. PF/VF is expected to extract the ptypes accordingly.
+ * Reason for doing this is because compiler doesn't allow nested flexible
+ * array fields).
+ *
+ * If all the ptypes don't fit into one mailbox buffer, CP splits the
+ * ptype info into multiple messages, where each message will have its own
+ * 'start_ptype_id', 'num_ptypes', and the ptype array itself. When CP is done
+ * updating all the ptype information extracted from the package (the number of
+ * ptypes extracted might be less than what PF/VF expects), it will append a
+ * dummy ptype (which has 'ptype_id_10' of 'struct virtchnl2_ptype' as 0xFFFF)
+ * to the ptype array.
+ *
+ * PF/VF is expected to receive multiple VIRTCHNL2_OP_GET_PTYPE_INFO messages.
+ *
+ * Associated with VIRTCHNL2_OP_GET_PTYPE_INFO.
+ */
+struct virtchnl2_get_ptype_info {
+	__le16 start_ptype_id;
+	__le16 num_ptypes;
+	__le32 pad;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_get_ptype_info);
+
+/**
+ * struct virtchnl2_vport_stats - Vport statistics.
+ * @vport_id: Vport id.
+ * @pad: Padding.
+ * @rx_bytes: Received bytes.
+ * @rx_unicast: Received unicast packets.
+ * @rx_multicast: Received multicast packets.
+ * @rx_broadcast: Received broadcast packets.
+ * @rx_discards: Discarded packets on receive.
+ * @rx_errors: Receive errors.
+ * @rx_unknown_protocol: Unlnown protocol.
+ * @tx_bytes: Transmitted bytes.
+ * @tx_unicast: Transmitted unicast packets.
+ * @tx_multicast: Transmitted multicast packets.
+ * @tx_broadcast: Transmitted broadcast packets.
+ * @tx_discards: Discarded packets on transmit.
+ * @tx_errors: Transmit errors.
+ * @rx_invalid_frame_length: Packets with invalid frame length.
+ * @rx_overflow_drop: Packets dropped on buffer overflow.
+ *
+ * PF/VF sends this message to CP to get the update stats by specifying the
+ * vport_id. CP responds with stats in struct virtchnl2_vport_stats.
+ *
+ * Associated with VIRTCHNL2_OP_GET_STATS.
+ */
+struct virtchnl2_vport_stats {
+	__le32 vport_id;
+	u8 pad[4];
+	__le64 rx_bytes;
+	__le64 rx_unicast;
+	__le64 rx_multicast;
+	__le64 rx_broadcast;
+	__le64 rx_discards;
+	__le64 rx_errors;
+	__le64 rx_unknown_protocol;
+	__le64 tx_bytes;
+	__le64 tx_unicast;
+	__le64 tx_multicast;
+	__le64 tx_broadcast;
+	__le64 tx_discards;
+	__le64 tx_errors;
+	__le64 rx_invalid_frame_length;
+	__le64 rx_overflow_drop;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(128, virtchnl2_vport_stats);
+
+/**
+ * struct virtchnl2_event - Event info.
+ * @event: Event opcode. See enum virtchnl2_event_codes.
+ * @link_speed: Link_speed provided in Mbps.
+ * @vport_id: Vport ID.
+ * @link_status: Link status.
+ * @pad: Padding.
+ * @reserved: Reserved.
+ *
+ * CP sends this message to inform the PF/VF driver of events that may affect
+ * it. No direct response is expected from the driver, though it may generate
+ * other messages in response to this one.
+ *
+ * Associated with VIRTCHNL2_OP_EVENT.
+ */
+struct virtchnl2_event {
+	__le32 event;
+	__le32 link_speed;
+	__le32 vport_id;
+	u8 link_status;
+	u8 pad;
+	__le16 reserved;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_event);
+
+/**
+ * struct virtchnl2_rss_key - RSS key info.
+ * @vport_id: Vport id.
+ * @key_len: Length of RSS key.
+ * @pad: Padding.
+ * @key_flex: RSS hash key, packed bytes.
+ * PF/VF sends this message to get or set RSS key. Only supported if both
+ * PF/VF and CP drivers set the VIRTCHNL2_CAP_RSS bit during configuration
+ * negotiation.
+ *
+ * Associated with VIRTCHNL2_OP_GET_RSS_KEY and VIRTCHNL2_OP_SET_RSS_KEY.
+ */
+struct virtchnl2_rss_key {
+	__le32 vport_id;
+	__le16 key_len;
+	u8 pad;
+	__DECLARE_FLEX_ARRAY(u8, key_flex);
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_rss_key);
+
+/**
+ * struct virtchnl2_queue_chunk - chunk of contiguous queues
+ * @type: See enum virtchnl2_queue_type.
+ * @start_queue_id: Starting queue id.
+ * @num_queues: Number of queues.
+ * @pad: Padding for future extensions.
+ */
+struct virtchnl2_queue_chunk {
+	__le32 type;
+	__le32 start_queue_id;
+	__le32 num_queues;
+	u8 pad[4];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_queue_chunk);
+
+/* struct virtchnl2_queue_chunks - chunks of contiguous queues
+ * @num_chunks: Number of chunks.
+ * @pad: Padding.
+ * @chunks: Chunks of contiguous queues info.
+ */
+struct virtchnl2_queue_chunks {
+	__le16 num_chunks;
+	u8 pad[6];
+	struct virtchnl2_queue_chunk chunks[];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_queue_chunks);
+
+/**
+ * struct virtchnl2_del_ena_dis_queues - Enable/disable queues info.
+ * @vport_id: Vport id.
+ * @pad: Padding.
+ * @chunks: Chunks of contiguous queues info.
+ *
+ * PF sends these messages to enable, disable or delete queues specified in
+ * chunks. PF sends virtchnl2_del_ena_dis_queues struct to specify the queues
+ * to be enabled/disabled/deleted. Also applicable to single queue receive or
+ * transmit. CP performs requested action and returns status.
+ *
+ * Associated with VIRTCHNL2_OP_ENABLE_QUEUES, VIRTCHNL2_OP_DISABLE_QUEUES and
+ * VIRTCHNL2_OP_DISABLE_QUEUES.
+ */
+struct virtchnl2_del_ena_dis_queues {
+	__le32 vport_id;
+	u8 pad[4];
+	struct virtchnl2_queue_chunks chunks;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_del_ena_dis_queues);
+
+/**
+ * struct virtchnl2_queue_vector - Queue to vector mapping.
+ * @queue_id: Queue id.
+ * @vector_id: Vector id.
+ * @pad: Padding.
+ * @itr_idx: See enum virtchnl2_itr_idx.
+ * @queue_type: See enum virtchnl2_queue_type.
+ * @pad1: Padding for future extensions.
+ */
+struct virtchnl2_queue_vector {
+	__le32 queue_id;
+	__le16 vector_id;
+	u8 pad[2];
+	__le32 itr_idx;
+	__le32 queue_type;
+	u8 pad1[8];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(24, virtchnl2_queue_vector);
+
+/**
+ * struct virtchnl2_queue_vector_maps - Map/unmap queues info.
+ * @vport_id: Vport id.
+ * @num_qv_maps: Number of queue vector maps.
+ * @pad: Padding.
+ * @qv_maps: Queue to vector maps.
+ *
+ * PF sends this message to map or unmap queues to vectors and interrupt
+ * throttling rate index registers. External data buffer contains
+ * virtchnl2_queue_vector_maps structure that contains num_qv_maps of
+ * virtchnl2_queue_vector structures. CP maps the requested queue vector maps
+ * after validating the queue and vector ids and returns a status code.
+ *
+ * Associated with VIRTCHNL2_OP_MAP_QUEUE_VECTOR and VIRTCHNL2_OP_UNMAP_QUEUE_VECTOR.
+ */
+struct virtchnl2_queue_vector_maps {
+	__le32 vport_id;
+	__le16 num_qv_maps;
+	u8 pad[10];
+	struct virtchnl2_queue_vector qv_maps[];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(16, virtchnl2_queue_vector_maps);
+
+/**
+ * struct virtchnl2_loopback - Loopback info.
+ * @vport_id: Vport id.
+ * @enable: Enable/disable.
+ * @pad: Padding for future extensions.
+ *
+ * PF/VF sends this message to transition to/from the loopback state. Setting
+ * the 'enable' to 1 enables the loopback state and setting 'enable' to 0
+ * disables it. CP configures the state to loopback and returns status.
+ *
+ * Associated with VIRTCHNL2_OP_LOOPBACK.
+ */
+struct virtchnl2_loopback {
+	__le32 vport_id;
+	u8 enable;
+	u8 pad[3];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_loopback);
+
+/* struct virtchnl2_mac_addr - MAC address info.
+ * @addr: MAC address.
+ * @type: MAC type. See enum virtchnl2_mac_addr_type.
+ * @pad: Padding for future extensions.
+ */
+struct virtchnl2_mac_addr {
+	u8 addr[ETH_ALEN];
+	u8 type;
+	u8 pad;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_mac_addr);
+
+/**
+ * struct virtchnl2_mac_addr_list - List of MAC addresses.
+ * @vport_id: Vport id.
+ * @num_mac_addr: Number of MAC addresses.
+ * @pad: Padding.
+ * @mac_addr_list: List with MAC address info.
+ *
+ * PF/VF driver uses this structure to send list of MAC addresses to be
+ * added/deleted to the CP where as CP performs the action and returns the
+ * status.
+ *
+ * Associated with VIRTCHNL2_OP_ADD_MAC_ADDR and VIRTCHNL2_OP_DEL_MAC_ADDR.
+ */
+
+struct virtchnl2_mac_addr_list {
+	__le32 vport_id;
+	__le16 num_mac_addr;
+	u8 pad[2];
+	struct virtchnl2_mac_addr mac_addr_list[];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_mac_addr_list);
+
+/**
+ * struct virtchnl2_promisc_info - Promisc type info.
+ * @vport_id: Vport id.
+ * @flags: See enum virtchnl2_promisc_flags.
+ * @pad: Padding for future extensions.
+ *
+ * PF/VF sends vport id and flags to the CP where as CP performs the action
+ * and returns the status.
+ *
+ * Associated with VIRTCHNL2_OP_CONFIG_PROMISCUOUS_MODE.
+ */
+struct virtchnl2_promisc_info {
+	__le32 vport_id;
+	/* See VIRTCHNL2_PROMISC_FLAGS definitions */
+	__le16 flags;
+	u8 pad[2];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_promisc_info);
+
+#endif /* _VIRTCHNL_2_H_ */
diff --git a/drivers/net/ethernet/intel/idpf/virtchnl2_lan_desc.h b/drivers/net/ethernet/intel/idpf/virtchnl2_lan_desc.h
new file mode 100644
index 000000000000..e2a95e6053a9
--- /dev/null
+++ b/drivers/net/ethernet/intel/idpf/virtchnl2_lan_desc.h
@@ -0,0 +1,448 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2023 Intel Corporation */
+
+#ifndef _VIRTCHNL2_LAN_DESC_H_
+#define _VIRTCHNL2_LAN_DESC_H_
+
+#include <linux/bits.h>
+
+/* This is an interface definition file where existing enums and their values
+ * must remain unchanged over time, so we specify explicit values for all enums.
+ */
+
+/* Transmit descriptor ID flags
+ */
+enum virtchnl2_tx_desc_ids {
+	VIRTCHNL2_TXDID_DATA				= BIT(0),
+	VIRTCHNL2_TXDID_CTX				= BIT(1),
+	/* TXDID bit 2 is reserved
+	 * TXDID bit 3 is free for future use
+	 * TXDID bit 4 is reserved
+	 */
+	VIRTCHNL2_TXDID_FLEX_TSO_CTX			= BIT(5),
+	/* TXDID bit 6 is reserved */
+	VIRTCHNL2_TXDID_FLEX_L2TAG1_L2TAG2		= BIT(7),
+	/* TXDID bits 8 and 9 are free for future use
+	 * TXDID bit 10 is reserved
+	 * TXDID bit 11 is free for future use
+	 */
+	VIRTCHNL2_TXDID_FLEX_FLOW_SCHED			= BIT(12),
+	/* TXDID bits 13 and 14 are free for future use */
+	VIRTCHNL2_TXDID_DESC_DONE			= BIT(15),
+};
+
+/* Receive descriptor IDs */
+enum virtchnl2_rx_desc_ids {
+	VIRTCHNL2_RXDID_1_32B_BASE			= 1,
+	/* FLEX_SQ_NIC and FLEX_SPLITQ share desc ids because they can be
+	 * differentiated based on queue model; e.g. single queue model can
+	 * only use FLEX_SQ_NIC and split queue model can only use FLEX_SPLITQ
+	 * for DID 2.
+	 */
+	VIRTCHNL2_RXDID_2_FLEX_SPLITQ			= 2,
+	VIRTCHNL2_RXDID_2_FLEX_SQ_NIC			= VIRTCHNL2_RXDID_2_FLEX_SPLITQ,
+	/* 3 through 6 are reserved */
+	VIRTCHNL2_RXDID_7_HW_RSVD			= 7,
+	/* 8 through 15 are free */
+};
+
+/* Receive descriptor ID bitmasks */
+#define VIRTCHNL2_RXDID_M(bit)			BIT_ULL(VIRTCHNL2_RXDID_##bit)
+
+enum virtchnl2_rx_desc_id_bitmasks {
+	VIRTCHNL2_RXDID_1_32B_BASE_M			= VIRTCHNL2_RXDID_M(1_32B_BASE),
+	VIRTCHNL2_RXDID_2_FLEX_SPLITQ_M			= VIRTCHNL2_RXDID_M(2_FLEX_SPLITQ),
+	VIRTCHNL2_RXDID_2_FLEX_SQ_NIC_M			= VIRTCHNL2_RXDID_M(2_FLEX_SQ_NIC),
+	VIRTCHNL2_RXDID_7_HW_RSVD_M			= VIRTCHNL2_RXDID_M(7_HW_RSVD),
+};
+
+/* For splitq virtchnl2_rx_flex_desc_adv_nic_3 desc members */
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_RXDID_M		GENMASK(3, 0)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_UMBCAST_M		GENMASK(7, 6)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_PTYPE_M		GENMASK(9, 0)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_RAW_CSUM_INV_S	12
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_RAW_CSUM_INV_M	\
+	BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_RAW_CSUM_INV_S)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_FF0_M		GENMASK(15, 13)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_LEN_PBUF_M		GENMASK(13, 0)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_GEN_S		14
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_GEN_M		\
+	BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_GEN_S)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_BUFQ_ID_S		15
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_BUFQ_ID_M		\
+	BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_BUFQ_ID_S)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_LEN_HDR_M		GENMASK(9, 0)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_RSC_S		10
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_RSC_M		\
+	BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_RSC_S)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_SPH_S		11
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_SPH_M		\
+	BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_SPH_S)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_FF1_S		12
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_FF1_M		GENMASK(14, 12)
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_MISS_S		15
+#define VIRTCHNL2_RX_FLEX_DESC_ADV_MISS_M		\
+	BIT_ULL(VIRTCHNL2_RX_FLEX_DESC_ADV_MISS_S)
+
+/* Bitmasks for splitq virtchnl2_rx_flex_desc_adv_nic_3 */
+enum virtchl2_rx_flex_desc_adv_status_error_0_qw1_bits {
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_DD_M			= BIT(0),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_EOF_M		= BIT(1),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_HBO_M		= BIT(2),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_L3L4P_M		= BIT(3),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_IPE_M		= BIT(4),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_L4E_M		= BIT(5),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EIPE_M		= BIT(6),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EUDPE_M		= BIT(7),
+};
+
+/* Bitmasks for splitq virtchnl2_rx_flex_desc_adv_nic_3 */
+enum virtchnl2_rx_flex_desc_adv_status_error_0_qw0_bits {
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_LPBK_M		= BIT(0),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_IPV6EXADD_M		= BIT(1),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_RXE_M		= BIT(2),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_CRCP_M		= BIT(3),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_RSS_VALID_M		= BIT(4),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_L2TAG1P_M		= BIT(5),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XTRMD0_VALID_M	= BIT(6),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XTRMD1_VALID_M	= BIT(7),
+};
+
+/* Bitmasks for splitq virtchnl2_rx_flex_desc_adv_nic_3 */
+enum virtchnl2_rx_flex_desc_adv_status_error_1_bits {
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_RSVD_M		= GENMASK(1, 0),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_ATRAEFAIL_M		= BIT(2),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_L2TAG2P_M		= BIT(3),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_XTRMD2_VALID_M	= BIT(4),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_XTRMD3_VALID_M	= BIT(5),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_XTRMD4_VALID_M	= BIT(6),
+	VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS1_XTRMD5_VALID_M	= BIT(7),
+};
+
+/* For singleq (flex) virtchnl2_rx_flex_desc fields
+ * For virtchnl2_rx_flex_desc.ptype_flex_flags0 member
+ */
+#define VIRTCHNL2_RX_FLEX_DESC_PTYPE_M				GENMASK(9, 0)
+
+/* For virtchnl2_rx_flex_desc.pkt_len member */
+#define VIRTCHNL2_RX_FLEX_DESC_PKT_LEN_M			GENMASK(13, 0)
+
+/* Bitmasks for singleq (flex) virtchnl2_rx_flex_desc */
+enum virtchnl2_rx_flex_desc_status_error_0_bits {
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_DD_M			= BIT(0),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_EOF_M			= BIT(1),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_HBO_M			= BIT(2),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_L3L4P_M			= BIT(3),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_IPE_M		= BIT(4),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_L4E_M		= BIT(5),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EIPE_M		= BIT(6),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_M		= BIT(7),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_LPBK_M			= BIT(8),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_IPV6EXADD_M		= BIT(9),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_RXE_M			= BIT(10),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_CRCP_M			= BIT(11),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_RSS_VALID_M		= BIT(12),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_L2TAG1P_M		= BIT(13),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_XTRMD0_VALID_M		= BIT(14),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS0_XTRMD1_VALID_M		= BIT(15),
+};
+
+/* Bitmasks for singleq (flex) virtchnl2_rx_flex_desc */
+enum virtchnl2_rx_flex_desc_status_error_1_bits {
+	VIRTCHNL2_RX_FLEX_DESC_STATUS1_CPM_M			= GENMASK(3, 0),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS1_NAT_M			= BIT(4),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS1_CRYPTO_M			= BIT(5),
+	/* [10:6] reserved */
+	VIRTCHNL2_RX_FLEX_DESC_STATUS1_L2TAG2P_M		= BIT(11),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS1_XTRMD2_VALID_M		= BIT(12),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS1_XTRMD3_VALID_M		= BIT(13),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS1_XTRMD4_VALID_M		= BIT(14),
+	VIRTCHNL2_RX_FLEX_DESC_STATUS1_XTRMD5_VALID_M		= BIT(15),
+};
+
+/* For virtchnl2_rx_flex_desc.ts_low member */
+#define VIRTCHNL2_RX_FLEX_TSTAMP_VALID				BIT(0)
+
+/* For singleq (non flex) virtchnl2_singleq_base_rx_desc legacy desc members */
+#define VIRTCHNL2_RX_BASE_DESC_QW1_LEN_PBUF_M		GENMASK_ULL(51, 38)
+#define VIRTCHNL2_RX_BASE_DESC_QW1_PTYPE_M		GENMASK_ULL(37, 30)
+#define VIRTCHNL2_RX_BASE_DESC_QW1_ERROR_M		GENMASK_ULL(26, 19)
+#define VIRTCHNL2_RX_BASE_DESC_QW1_STATUS_M		GENMASK_ULL(18, 0)
+
+/* Bitmasks for singleq (base) virtchnl2_rx_base_desc */
+enum virtchnl2_rx_base_desc_status_bits {
+	VIRTCHNL2_RX_BASE_DESC_STATUS_DD_M		= BIT(0),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_EOF_M		= BIT(1),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_L2TAG1P_M		= BIT(2),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_L3L4P_M		= BIT(3),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_CRCP_M		= BIT(4),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_RSVD_M		= GENMASK(7, 5),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_EXT_UDP_0_M	= BIT(8),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_UMBCAST_M		= GENMASK(10, 9),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_FLM_M		= BIT(11),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_FLTSTAT_M		= GENMASK(13, 12),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_LPBK_M		= BIT(14),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_IPV6EXADD_M	= BIT(15),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_RSVD1_M		= GENMASK(17, 16),
+	VIRTCHNL2_RX_BASE_DESC_STATUS_INT_UDP_0_M	= BIT(18),
+};
+
+/* Bitmasks for singleq (base) virtchnl2_rx_base_desc */
+enum virtchnl2_rx_base_desc_error_bits {
+	VIRTCHNL2_RX_BASE_DESC_ERROR_RXE_M		= BIT(0),
+	VIRTCHNL2_RX_BASE_DESC_ERROR_ATRAEFAIL_M	= BIT(1),
+	VIRTCHNL2_RX_BASE_DESC_ERROR_HBO_M		= BIT(2),
+	VIRTCHNL2_RX_BASE_DESC_ERROR_L3L4E_M		= GENMASK(5, 3),
+	VIRTCHNL2_RX_BASE_DESC_ERROR_IPE_M		= BIT(3),
+	VIRTCHNL2_RX_BASE_DESC_ERROR_L4E_M		= BIT(4),
+	VIRTCHNL2_RX_BASE_DESC_ERROR_EIPE_M		= BIT(5),
+	VIRTCHNL2_RX_BASE_DESC_ERROR_OVERSIZE_M		= BIT(6),
+	VIRTCHNL2_RX_BASE_DESC_ERROR_PPRS_M		= BIT(7),
+};
+
+/* Bitmasks for singleq (base) virtchnl2_rx_base_desc */
+#define VIRTCHNL2_RX_BASE_DESC_FLTSTAT_RSS_HASH_M	GENMASK(13, 12)
+
+/**
+ * struct virtchnl2_splitq_rx_buf_desc - SplitQ RX buffer descriptor format
+ * @qword0: RX buffer struct.
+ * @qword0.buf_id: Buffer identifier.
+ * @qword0.rsvd0: Reserved.
+ * @qword0.rsvd1: Reserved.
+ * @pkt_addr: Packet buffer address.
+ * @hdr_addr: Header buffer address.
+ * @rsvd2: Rerserved.
+ *
+ * Receive Descriptors
+ * SplitQ buffer
+ * |                                       16|                   0|
+ * ----------------------------------------------------------------
+ * | RSV                                     | Buffer ID          |
+ * ----------------------------------------------------------------
+ * | Rx packet buffer address                                     |
+ * ----------------------------------------------------------------
+ * | Rx header buffer address                                     |
+ * ----------------------------------------------------------------
+ * | RSV                                                          |
+ * ----------------------------------------------------------------
+ * |                                                             0|
+ */
+struct virtchnl2_splitq_rx_buf_desc {
+	struct {
+		__le16  buf_id;
+		__le16  rsvd0;
+		__le32  rsvd1;
+	} qword0;
+	__le64  pkt_addr;
+	__le64  hdr_addr;
+	__le64  rsvd2;
+};
+
+/**
+ * struct virtchnl2_singleq_rx_buf_desc - SingleQ RX buffer descriptor format.
+ * @pkt_addr: Packet buffer address.
+ * @hdr_addr: Header buffer address.
+ * @rsvd1: Reserved.
+ * @rsvd2: Reserved.
+ *
+ * SingleQ buffer
+ * |                                                             0|
+ * ----------------------------------------------------------------
+ * | Rx packet buffer address                                     |
+ * ----------------------------------------------------------------
+ * | Rx header buffer address                                     |
+ * ----------------------------------------------------------------
+ * | RSV                                                          |
+ * ----------------------------------------------------------------
+ * | RSV                                                          |
+ * ----------------------------------------------------------------
+ * |                                                             0|
+ */
+struct virtchnl2_singleq_rx_buf_desc {
+	__le64  pkt_addr;
+	__le64  hdr_addr;
+	__le64  rsvd1;
+	__le64  rsvd2;
+};
+
+/**
+ * struct virtchnl2_singleq_base_rx_desc - RX descriptor writeback format.
+ * @qword0: First quad word struct.
+ * @qword0.lo_dword: Lower dual word struct.
+ * @qword0.lo_dword.mirroring_status: Mirrored packet status.
+ * @qword0.lo_dword.l2tag1: Stripped L2 tag from the received packet.
+ * @qword0.hi_dword: High dual word union.
+ * @qword0.hi_dword.rss: RSS hash.
+ * @qword0.hi_dword.fd_id: Flow director filter id.
+ * @qword1: Second quad word struct.
+ * @qword1.status_error_ptype_len: Status/error/PTYPE/length.
+ * @qword2: Third quad word struct.
+ * @qword2.ext_status: Extended status.
+ * @qword2.rsvd: Reserved.
+ * @qword2.l2tag2_1: Extracted L2 tag 2 from the packet.
+ * @qword2.l2tag2_2: Reserved.
+ * @qword3: Fourth quad word struct.
+ * @qword3.reserved: Reserved.
+ * @qword3.fd_id: Flow director filter id.
+ *
+ * Profile ID 0x1, SingleQ, base writeback format
+ */
+struct virtchnl2_singleq_base_rx_desc {
+	struct {
+		struct {
+			__le16 mirroring_status;
+			__le16 l2tag1;
+		} lo_dword;
+		union {
+			__le32 rss;
+			__le32 fd_id;
+		} hi_dword;
+	} qword0;
+	struct {
+		__le64 status_error_ptype_len;
+	} qword1;
+	struct {
+		__le16 ext_status;
+		__le16 rsvd;
+		__le16 l2tag2_1;
+		__le16 l2tag2_2;
+	} qword2;
+	struct {
+		__le32 reserved;
+		__le32 fd_id;
+	} qword3;
+};
+
+/**
+ * struct virtchnl2_rx_flex_desc_nic - RX descriptor writeback format.
+ *
+ * @rxdid: Descriptor builder profile id.
+ * @mir_id_umb_cast: umb_cast=[7:6], mirror=[5:0]
+ * @ptype_flex_flags0: ff0=[15:10], ptype=[9:0]
+ * @pkt_len: Packet length, [15:14] are reserved.
+ * @hdr_len_sph_flex_flags1: ff1/ext=[15:12], sph=[11], header=[10:0].
+ * @status_error0: Status/Error section 0.
+ * @l2tag1: Stripped L2 tag from the received packet
+ * @rss_hash: RSS hash.
+ * @status_error1: Status/Error section 1.
+ * @flexi_flags2: Flexible flags section 2.
+ * @ts_low: Lower word of timestamp value.
+ * @l2tag2_1st: First L2TAG2.
+ * @l2tag2_2nd: Second L2TAG2.
+ * @flow_id: Flow id.
+ * @flex_ts: Timestamp and flexible flow id union.
+ * @flex_ts.ts_high: Timestamp higher word of the timestamp value.
+ * @flex_ts.flex.rsvd: Reserved.
+ * @flex_ts.flex.flow_id_ipv6: IPv6 flow id.
+ *
+ * Profile ID 0x2, SingleQ, flex writeback format
+ */
+struct virtchnl2_rx_flex_desc_nic {
+	/* Qword 0 */
+	u8 rxdid;
+	u8 mir_id_umb_cast;
+	__le16 ptype_flex_flags0;
+	__le16 pkt_len;
+	__le16 hdr_len_sph_flex_flags1;
+	/* Qword 1 */
+	__le16 status_error0;
+	__le16 l2tag1;
+	__le32 rss_hash;
+	/* Qword 2 */
+	__le16 status_error1;
+	u8 flexi_flags2;
+	u8 ts_low;
+	__le16 l2tag2_1st;
+	__le16 l2tag2_2nd;
+	/* Qword 3 */
+	__le32 flow_id;
+	union {
+		struct {
+			__le16 rsvd;
+			__le16 flow_id_ipv6;
+		} flex;
+		__le32 ts_high;
+	} flex_ts;
+};
+
+/**
+ * struct virtchnl2_rx_flex_desc_adv_nic_3 - RX descriptor writeback format.
+ * @rxdid_ucast: ucast=[7:6], rsvd=[5:4], profile_id=[3:0].
+ * @status_err0_qw0: Status/Error section 0 in quad word 0.
+ * @ptype_err_fflags0: ff0=[15:12], udp_len_err=[11], ip_hdr_err=[10], ptype=[9:0].
+ * @pktlen_gen_bufq_id: bufq_id=[15] only in splitq, gen=[14] only in splitq, plen=[13:0].
+ * @hdrlen_flags: miss_prepend=[15], trunc_mirr=[14], int_udp_0=[13], ext_udp0=[12],
+ *		  sph=[11] only in splitq, rsc=[10] only in splitq, header=[9:0].
+ * @status_err0_qw1: Status/Error section 0 in quad word 1.
+ * @status_err1: Status/Error section 1.
+ * @fflags1: Flexible flags section 1.
+ * @ts_low: Lower word of timestamp value.
+ * @buf_id: Buffer identifier. Only in splitq mode.
+ * @misc: Union.
+ * @misc.raw_cs: Raw checksum.
+ * @misc.l2tag1: Stripped L2 tag from the received packet
+ * @misc.rscseglen:
+ * @hash1: Lower bits of Rx hash value.
+ * @ff2_mirrid_hash2: Union.
+ * @ff2_mirrid_hash2.fflags2: Flexible flags section 2.
+ * @ff2_mirrid_hash2.mirrorid: Mirror id.
+ * @ff2_mirrid_hash2.rscseglen: RSC segment length.
+ * @hash3: Upper bits of Rx hash value.
+ * @l2tag2: Extracted L2 tag 2 from the packet.
+ * @fmd4: Flexible metadata container 4.
+ * @l2tag1: Stripped L2 tag from the received packet
+ * @fmd6: Flexible metadata container 6.
+ * @ts_high: Timestamp higher word of the timestamp value.
+ *
+ * Profile ID 0x2, SplitQ, flex writeback format
+ *
+ * Flex-field 0: BufferID
+ * Flex-field 1: Raw checksum/L2TAG1/RSC Seg Len (determined by HW)
+ * Flex-field 2: Hash[15:0]
+ * Flex-flags 2: Hash[23:16]
+ * Flex-field 3: L2TAG2
+ * Flex-field 5: L2TAG1
+ * Flex-field 7: Timestamp (upper 32 bits)
+ */
+struct virtchnl2_rx_flex_desc_adv_nic_3 {
+	/* Qword 0 */
+	u8 rxdid_ucast;
+	u8 status_err0_qw0;
+	__le16 ptype_err_fflags0;
+	__le16 pktlen_gen_bufq_id;
+	__le16 hdrlen_flags;
+	/* Qword 1 */
+	u8 status_err0_qw1;
+	u8 status_err1;
+	u8 fflags1;
+	u8 ts_low;
+	__le16 buf_id;
+	union {
+		__le16 raw_cs;
+		__le16 l2tag1;
+		__le16 rscseglen;
+	} misc;
+	/* Qword 2 */
+	__le16 hash1;
+	union {
+		u8 fflags2;
+		u8 mirrorid;
+		u8 hash2;
+	} ff2_mirrid_hash2;
+	u8 hash3;
+	__le16 l2tag2;
+	__le16 fmd4;
+	/* Qword 3 */
+	__le16 l2tag1;
+	__le16 fmd6;
+	__le32 ts_high;
+};
+
+/* Common union for accessing descriptor format structs */
+union virtchnl2_rx_desc {
+	struct virtchnl2_singleq_base_rx_desc		base_wb;
+	struct virtchnl2_rx_flex_desc_nic		flex_nic_wb;
+	struct virtchnl2_rx_flex_desc_adv_nic_3		flex_adv_nic_3_wb;
+};
+
+#endif /* _VIRTCHNL_LAN_DESC_H_ */
