diff mbox series

[net-next,v2,1/3] net: stmmac: dwmac-qcom-ethqos: Use of_get_phy_mode() over device_get_phy_mode()

Message ID 20230710201636.200412-2-ahalaney@redhat.com (mailing list archive)
State Accepted
Commit a8aa20a64ef2bdbad7421acf9c7217c2c0e4ac75
Delegated to: Netdev Maintainers
Headers show
Series net: stmmac: dwmac-qcom-ethqos: Improve error handling | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1341 this patch: 1341
netdev/cc_maintainers success CCed 13 of 13 maintainers
netdev/build_clang success Errors and warnings before: 1364 this patch: 1364
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1364 this patch: 1364
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 37 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Andrew Halaney July 10, 2023, 8:06 p.m. UTC 
Since this driver only uses devicetree, let's move over to
of_get_phy_mode(). That API has an explicit error return and produces a
phy_interface_t directly instead of an int when representing the phy
mode.

Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
    * Convert to using of_get_phy_mode() instead of continuing to use
      device_get_phy_mode() (Andrew Lunn)

 .../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Andrew Lunn July 10, 2023, 8:59 p.m. UTC | #1 
On Mon, Jul 10, 2023 at 03:06:37PM -0500, Andrew Halaney wrote:
> Since this driver only uses devicetree, let's move over to
> of_get_phy_mode(). That API has an explicit error return and produces a
> phy_interface_t directly instead of an int when representing the phy
> mode.
> 
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index e62940414e54..ebafdadb28d5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -4,10 +4,10 @@ 
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_net.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/phy/phy.h>
-#include <linux/property.h>
 
 #include "stmmac.h"
 #include "stmmac_platform.h"
@@ -104,7 +104,7 @@  struct qcom_ethqos {
 	struct clk *link_clk;
 	struct phy *serdes_phy;
 	unsigned int speed;
-	int phy_mode;
+	phy_interface_t phy_mode;
 
 	const struct ethqos_emac_por *por;
 	unsigned int num_por;
@@ -720,7 +720,9 @@  static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (!ethqos)
 		return -ENOMEM;
 
-	ethqos->phy_mode = device_get_phy_mode(dev);
+	ret = of_get_phy_mode(np, &ethqos->phy_mode);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get phy mode\n");
 	switch (ethqos->phy_mode) {
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
@@ -731,8 +733,6 @@  static int qcom_ethqos_probe(struct platform_device *pdev)
 	case PHY_INTERFACE_MODE_SGMII:
 		ethqos->configure_func = ethqos_configure_sgmii;
 		break;
-	case -ENODEV:
-		return -ENODEV;
 	default:
 		return -EINVAL;
 	}