diff mbox series

[v3,5/6] net: phy: at803x: remove qca8081 1G fast retrain and slave seed config

Message ID 20230716084924.9714-6-quic_luoj@quicinc.com (mailing list archive)
State Accepted
Commit df9401ff3e6eeaa42bfb06761967f1b71f5afce7
Delegated to: Netdev Maintainers
Headers show
Series net: phy: at803x: support qca8081 1G version chip | expand

Checks

Context Check Description
netdev/series_format warning Target tree name not specified in the subject
netdev/tree_selection success Guessed tree name to be net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1342 this patch: 1342
netdev/cc_maintainers success CCed 8 of 8 maintainers
netdev/build_clang success Errors and warnings before: 1365 this patch: 1365
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1365 this patch: 1365
netdev/checkpatch warning CHECK: Alignment should match open parenthesis WARNING: line length of 82 exceeds 80 columns WARNING: line length of 83 exceeds 80 columns WARNING: line length of 90 exceeds 80 columns
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Jie Luo July 16, 2023, 8:49 a.m. UTC 
The fast retrain and slave seed configs are only applicable when the 2.5G
ability is supported.

Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
---
 drivers/net/phy/at803x.c | 50 +++++++++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 18 deletions(-)

Comments

Andrew Lunn July 16, 2023, 2:48 p.m. UTC | #1 
On Sun, Jul 16, 2023 at 04:49:23PM +0800, Luo Jie wrote:
> The fast retrain and slave seed configs are only applicable when the 2.5G
> ability is supported.
> 
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

FYI: You normally have Signed-off-by: last. No need to resend, but
please keep this in mind for the next patchset.

    Andrew
Jie Luo July 17, 2023, 2:46 a.m. UTC | #2 
On 7/16/2023 10:48 PM, Andrew Lunn wrote:
> On Sun, Jul 16, 2023 at 04:49:23PM +0800, Luo Jie wrote:
>> The fast retrain and slave seed configs are only applicable when the 2.5G
>> ability is supported.
>>
>> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> 
> FYI: You normally have Signed-off-by: last. No need to resend, but
> please keep this in mind for the next patchset.
> 
>      Andrew

got it, thanks Andrew for the reminder.
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index cb4c45c81a85..a141f133b8aa 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1750,6 +1750,11 @@  static bool qca808x_is_prefer_master(struct phy_device *phydev)
 		(phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED);
 }
 
+static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
+{
+	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
+}
+
 static int qca808x_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -1766,20 +1771,24 @@  static int qca808x_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	/* Config the fast retrain for the link 2500M */
-	ret = qca808x_phy_fast_retrain_config(phydev);
-	if (ret)
-		return ret;
-
-	ret = genphy_read_master_slave(phydev);
-	if (ret < 0)
-		return ret;
-
-	if (!qca808x_is_prefer_master(phydev)) {
-		/* Enable seed and configure lower ramdom seed to make phy linked as slave mode */
-		ret = qca808x_phy_ms_seed_enable(phydev, true);
+	if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
+		/* Config the fast retrain for the link 2500M */
+		ret = qca808x_phy_fast_retrain_config(phydev);
 		if (ret)
 			return ret;
+
+		ret = genphy_read_master_slave(phydev);
+		if (ret < 0)
+			return ret;
+
+		if (!qca808x_is_prefer_master(phydev)) {
+			/* Enable seed and configure lower ramdom seed to make phy
+			 * linked as slave mode.
+			 */
+			ret = qca808x_phy_ms_seed_enable(phydev, true);
+			if (ret)
+				return ret;
+		}
 	}
 
 	/* Configure adc threshold as 100mv for the link 10M */
@@ -1821,11 +1830,13 @@  static int qca808x_read_status(struct phy_device *phydev)
 		 * value is configured as the same value, the link can't be up and no link change
 		 * occurs.
 		 */
-		if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
-				qca808x_is_prefer_master(phydev)) {
-			qca808x_phy_ms_seed_enable(phydev, false);
-		} else {
-			qca808x_phy_ms_seed_enable(phydev, true);
+		if (qca808x_has_fast_retrain_or_slave_seed(phydev)) {
+			if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR ||
+					qca808x_is_prefer_master(phydev)) {
+				qca808x_phy_ms_seed_enable(phydev, false);
+			} else {
+				qca808x_phy_ms_seed_enable(phydev, true);
+			}
 		}
 	}
 
@@ -1840,7 +1851,10 @@  static int qca808x_soft_reset(struct phy_device *phydev)
 	if (ret < 0)
 		return ret;
 
-	return qca808x_phy_ms_seed_enable(phydev, true);
+	if (qca808x_has_fast_retrain_or_slave_seed(phydev))
+		ret = qca808x_phy_ms_seed_enable(phydev, true);
+
+	return ret;
 }
 
 static bool qca808x_cdt_fault_length_valid(int cdt_code)