Message ID | 20230816060724.1398842-3-liuhangbin@gmail.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | ipv6: update route when delete source address | expand |
Context | Check | Description |
---|---|---|
netdev/tree_selection | success | Clearly marked for net-next |
netdev/apply | fail | Patch does not apply to net-next |
This no longer applies after commit a63e10da42e7 ("selftests: fib_tests: Add a test case for IPv6 garbage collection") so you will need to rebase. Thanks for the test cases. See a few comments below. On Wed, Aug 16, 2023 at 02:07:24PM +0800, Hangbin Liu wrote: > Add a test case for IPv6 source address delete. As David suggested, add tests: > - Single device using src address > - Two devices with the same source address > - VRF with single device using src address > - VRF with two devices using src address > > As Ido points out, in IPv6, the preferred source address is looked up in > the same VRF as the first nexthop device. This will give us similar results > to IPv4 if the route is installed in the same VRF as the nexthop device, but > not when the nexthop device is enslaved to a different VRF. So add tests: > - src address and nexthop dev in same VR > - src address and nexthop device in different VRF > > The link local address delete logic is different from the global address. > It should only affect the associate device it bonds to. Add tests cases > for link local address testing. > > The table 0 and same FIB info tests are copied from IPv4 tests. > > Here is the test result: > > IPv6 delete address route tests > Single device using src address > TEST: Prefsrc removed when src address removed on other device [ OK ] > Two devices with the same source address > TEST: Prefsrc not removed when src address exist on other device [ OK ] > VRF with single device using src address > TEST: Prefsrc removed when src address removed on other device [ OK ] > VRF with two devices using src address > TEST: Prefsrc not removed when src address exist on other device [ OK ] > src address and nexthop dev in same VRF > TEST: Prefsrc removed from VRF when source address deleted [ OK ] > TEST: Prefsrc in default VRF not removed [ OK ] > TEST: Prefsrc not removed from VRF when source address exist [ OK ] > TEST: Prefsrc in default VRF removed [ OK ] > src address and nexthop device in different VRF > TEST: Prefsrc not removed from VRF when nexthop dev in diff VRF [ OK ] > TEST: Prefsrc not removed in default VRF [ OK ] > TEST: Prefsrc removed from VRF when nexthop dev in diff VRF [ OK ] > TEST: Prefsrc removed in default VRF [ OK ] > Same FIB info with different table ID > TEST: Prefsrc removed from VRF when source address deleted [ OK ] > TEST: Prefsrc in default VRF not removed [ OK ] > TEST: Prefsrc not removed from VRF when source address exist [ OK ] > TEST: Prefsrc in default VRF removed [ OK ] > Table ID 0 > TEST: Prefsrc removed from default VRF when source address deleted [ OK ] > Link local source route > TEST: Prefsrc not removed when delete ll addr from other dev [ OK ] > TEST: Prefsrc removed when delete ll addr [ OK ] > TEST: Prefsrc not removed when delete ll addr from other dev [ OK ] > TEST: Prefsrc removed even ll addr still exist on other dev [ OK ] > > Tests passed: 21 > Tests failed: 0 > > Suggested-by: Ido Schimmel <idosch@idosch.org> > Suggested-by: David Ahern <dsahern@kernel.org> > Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> > --- > v7: add more tests as Ido and David suggested. Remove the IPv4 part as I want > to focus on the IPv6 fixes. > --- > tools/testing/selftests/net/fib_tests.sh | 163 ++++++++++++++++++++++- > 1 file changed, 162 insertions(+), 1 deletion(-) > > diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh > index 35d89dfa6f11..0aa17b2ac8e1 100755 > --- a/tools/testing/selftests/net/fib_tests.sh > +++ b/tools/testing/selftests/net/fib_tests.sh > @@ -9,7 +9,7 @@ ret=0 > ksft_skip=4 > > # all tests in this script. Can be overridden with -t option > -TESTS="unregister down carrier nexthop suppress ipv6_notify ipv4_notify ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics ipv4_route_metrics ipv4_route_v6_gw rp_filter ipv4_del_addr ipv4_mangle ipv6_mangle ipv4_bcast_neigh" > +TESTS="unregister down carrier nexthop suppress ipv6_notify ipv4_notify ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics ipv4_route_metrics ipv4_route_v6_gw rp_filter ipv4_del_addr ipv6_del_addr ipv4_mangle ipv6_mangle ipv4_bcast_neigh" > > VERBOSE=0 > PAUSE_ON_FAIL=no > @@ -1869,6 +1869,166 @@ ipv4_del_addr_test() > cleanup > } > > +ipv6_del_addr_test() > +{ > + echo > + echo "IPv6 delete address route tests" > + > + setup > + > + set -e > + for i in $(seq 6); do > + $IP li add dummy${i} up type dummy > + done > + > + $IP li add red up type vrf table 1111 > + $IP ro add vrf red unreachable default > + for i in $(seq 4 6); do > + $IP li set dummy${i} vrf red > + done > + > + $IP addr add dev dummy1 fe80::1/128 > + $IP addr add dev dummy1 2001:db8:101::1/64 > + $IP addr add dev dummy1 2001:db8:101::10/64 > + $IP addr add dev dummy1 2001:db8:101::11/64 > + $IP addr add dev dummy1 2001:db8:101::12/64 > + $IP addr add dev dummy1 2001:db8:101::13/64 > + $IP addr add dev dummy1 2001:db8:101::14/64 > + $IP addr add dev dummy1 2001:db8:101::15/64 > + $IP addr add dev dummy2 fe80::1/128 > + $IP addr add dev dummy2 2001:db8:101::1/64 > + $IP addr add dev dummy2 2001:db8:101::11/64 > + $IP addr add dev dummy3 fe80::1/128 > + > + $IP addr add dev dummy4 2001:db8:101::1/64 > + $IP addr add dev dummy4 2001:db8:101::10/64 > + $IP addr add dev dummy4 2001:db8:101::11/64 > + $IP addr add dev dummy4 2001:db8:101::12/64 > + $IP addr add dev dummy4 2001:db8:101::13/64 > + $IP addr add dev dummy4 2001:db8:101::14/64 > + $IP addr add dev dummy5 2001:db8:101::1/64 > + $IP addr add dev dummy5 2001:db8:101::11/64 > + > + # Single device using src address > + $IP route add 2001:db8:110::/64 dev dummy3 src 2001:db8:101::10 > + # Two devices with the same source address > + $IP route add 2001:db8:111::/64 dev dummy3 src 2001:db8:101::11 > + # VRF with single device using src address > + $IP route add vrf red 2001:db8:110::/64 dev dummy6 src 2001:db8:101::10 > + # VRF with two devices using src address > + $IP route add vrf red 2001:db8:111::/64 dev dummy6 src 2001:db8:101::11 > + # src address and nexthop dev in same VRF > + $IP route add 2001:db8:112::/64 dev dummy3 src 2001:db8:101::12 > + $IP route add vrf red 2001:db8:112::/64 dev dummy6 src 2001:db8:101::12 > + # src address and nexthop device in different VRF > + $IP route add 2001:db8:113::/64 dev lo src 2001:db8:101::13 > + $IP route add vrf red 2001:db8:113::/64 dev lo src 2001:db8:101::13 > + # Same FIB info with different table ID I suggest removing this test case as in IPv6 there is no sharing of FIB info, unlike in IPv4. > + $IP route add 2001:db8:114::/64 via 2001:db8:101::2 src 2001:db8:101::14 > + $IP route add vrf red 2001:db8:114::/64 via 2001:db8:101::2 src 2001:db8:101::14 > + # table ID 0 > + $IP route add table 0 2001:db8:115::/64 via 2001:db8:101::2 src 2001:db8:101::15 > + # Link local source route > + $IP route add 2001:db8:116::/64 dev dummy2 src fe80::1 > + $IP route add 2001:db8:117::/64 dev dummy3 src fe80::1 > + set +e > + > + echo " Single device using src address" > + > + $IP addr del dev dummy1 2001:db8:101::10/64 > + $IP -6 route show | grep -q "src 2001:db8:101::10 " > + log_test $? 1 "Prefsrc removed when src address removed on other device" > + > + echo " Two devices with the same source address" > + > + $IP addr del dev dummy1 2001:db8:101::11/64 > + $IP -6 route show | grep -q "src 2001:db8:101::11 " > + log_test $? 0 "Prefsrc not removed when src address exist on other device" What about deleting the address from dummy2 and checking that the preferred source address is removed from the route? I know it's similar to the previous case, but still a good test case. > + > + echo " VRF with single device using src address" > + > + $IP addr del dev dummy4 2001:db8:101::10/64 > + $IP -6 route show vrf red | grep -q "src 2001:db8:101::10 " > + log_test $? 1 "Prefsrc removed when src address removed on other device" > + > + echo " VRF with two devices using src address" > + > + $IP addr del dev dummy4 2001:db8:101::11/64 > + $IP -6 route show vrf red | grep -q "src 2001:db8:101::11 " > + log_test $? 0 "Prefsrc not removed when src address exist on other device" Likewise. > + > + echo " src address and nexthop dev in same VRF" > + > + $IP addr del dev dummy4 2001:db8:101::12/64 > + $IP -6 route show vrf red | grep -q "src 2001:db8:101::12 " > + log_test $? 1 "Prefsrc removed from VRF when source address deleted" > + $IP -6 route show | grep -q " src 2001:db8:101::12 " > + log_test $? 0 "Prefsrc in default VRF not removed" > + > + $IP addr add dev dummy4 2001:db8:101::12/64 > + $IP route replace vrf red 2001:db8:112::/64 dev dummy6 src 2001:db8:101::12 > + $IP addr del dev dummy1 2001:db8:101::12/64 > + $IP -6 route show vrf red | grep -q "src 2001:db8:101::12 " ^ Please be consistent about the space before "src". In some places you have it and in some you don't. > + log_test $? 0 "Prefsrc not removed from VRF when source address exist" > + $IP -6 route show | grep -q " src 2001:db8:101::12 " > + log_test $? 1 "Prefsrc in default VRF removed" > + > + echo " src address and nexthop device in different VRF" > + > + $IP addr del dev dummy4 2001:db8:101::13/64 > + $IP -6 route show vrf red | grep -q "src 2001:db8:101::13 " > + log_test $? 0 "Prefsrc not removed from VRF when nexthop dev in diff VRF" > + $IP -6 route show | grep -q " src 2001:db8:101::13 " > + log_test $? 0 "Prefsrc not removed in default VRF" > + > + $IP addr add dev dummy4 2001:db8:101::13/64 > + $IP addr del dev dummy1 2001:db8:101::13/64 > + $IP -6 route show vrf red | grep -q "src 2001:db8:101::13 " > + log_test $? 1 "Prefsrc removed from VRF when nexthop dev in diff VRF" > + $IP -6 route show | grep -q " src 2001:db8:101::13 " > + log_test $? 1 "Prefsrc removed in default VRF" > + > + echo " Same FIB info with different table ID" > + > + $IP addr del dev dummy4 2001:db8:101::14/64 > + $IP -6 route show vrf red | grep -q "src 2001:db8:101::14 " > + log_test $? 1 "Prefsrc removed from VRF when source address deleted" > + $IP -6 route show | grep -q " src 2001:db8:101::14 " > + log_test $? 0 "Prefsrc in default VRF not removed" > + > + $IP addr add dev dummy4 2001:db8:101::14/64 > + $IP route replace vrf red 2001:db8:114::/64 via 2001:db8:101::2 src 2001:db8:101::14 > + $IP addr del dev dummy1 2001:db8:101::14/64 > + $IP -6 route show vrf red | grep -q "src 2001:db8:101::14 " > + log_test $? 0 "Prefsrc not removed from VRF when source address exist" > + $IP -6 route show | grep -q " src 2001:db8:101::14 " > + log_test $? 1 "Prefsrc in default VRF removed" > + > + echo " Table ID 0" > + > + $IP addr del dev dummy1 2001:db8:101::15/64 > + $IP -6 route show | grep -q "src 2001:db8:101::15" > + log_test $? 1 "Prefsrc removed from default VRF when source address deleted" > + > + echo " Link local source route" > + $IP addr del dev dummy1 fe80::1/128 > + $IP -6 route show | grep -q "2001:db8:116::/64 dev dummy2 src fe80::1" > + log_test $? 0 "Prefsrc not removed when delete ll addr from other dev" > + $IP addr del dev dummy2 fe80::1/128 > + $IP -6 route show | grep -q "2001:db8:116::/64 dev dummy2 src fe80::1" > + log_test $? 1 "Prefsrc removed when delete ll addr" > + $IP -6 route show | grep -q "2001:db8:117::/64 dev dummy3 src fe80::1" > + log_test $? 0 "Prefsrc not removed when delete ll addr from other dev" > + $IP addr add dev dummy1 fe80::1/128 > + $IP addr del dev dummy3 fe80::1/128 > + $IP -6 route show | grep -q "2001:db8:117::/64 dev dummy3 src fe80::1" > + log_test $? 1 "Prefsrc removed even ll addr still exist on other dev" > + > + for i in $(seq 6); do > + $IP li del dummy${i} > + done > + cleanup > +} > > ipv4_route_v6_gw_test() > { > @@ -2211,6 +2371,7 @@ do > ipv6_addr_metric) ipv6_addr_metric_test;; > ipv4_addr_metric) ipv4_addr_metric_test;; > ipv4_del_addr) ipv4_del_addr_test;; > + ipv6_del_addr) ipv6_del_addr_test;; > ipv6_route_metrics) ipv6_route_metrics_test;; > ipv4_route_metrics) ipv4_route_metrics_test;; > ipv4_route_v6_gw) ipv4_route_v6_gw_test;; > -- > 2.38.1 >
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 35d89dfa6f11..0aa17b2ac8e1 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -9,7 +9,7 @@ ret=0 ksft_skip=4 # all tests in this script. Can be overridden with -t option -TESTS="unregister down carrier nexthop suppress ipv6_notify ipv4_notify ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics ipv4_route_metrics ipv4_route_v6_gw rp_filter ipv4_del_addr ipv4_mangle ipv6_mangle ipv4_bcast_neigh" +TESTS="unregister down carrier nexthop suppress ipv6_notify ipv4_notify ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric ipv6_route_metrics ipv4_route_metrics ipv4_route_v6_gw rp_filter ipv4_del_addr ipv6_del_addr ipv4_mangle ipv6_mangle ipv4_bcast_neigh" VERBOSE=0 PAUSE_ON_FAIL=no @@ -1869,6 +1869,166 @@ ipv4_del_addr_test() cleanup } +ipv6_del_addr_test() +{ + echo + echo "IPv6 delete address route tests" + + setup + + set -e + for i in $(seq 6); do + $IP li add dummy${i} up type dummy + done + + $IP li add red up type vrf table 1111 + $IP ro add vrf red unreachable default + for i in $(seq 4 6); do + $IP li set dummy${i} vrf red + done + + $IP addr add dev dummy1 fe80::1/128 + $IP addr add dev dummy1 2001:db8:101::1/64 + $IP addr add dev dummy1 2001:db8:101::10/64 + $IP addr add dev dummy1 2001:db8:101::11/64 + $IP addr add dev dummy1 2001:db8:101::12/64 + $IP addr add dev dummy1 2001:db8:101::13/64 + $IP addr add dev dummy1 2001:db8:101::14/64 + $IP addr add dev dummy1 2001:db8:101::15/64 + $IP addr add dev dummy2 fe80::1/128 + $IP addr add dev dummy2 2001:db8:101::1/64 + $IP addr add dev dummy2 2001:db8:101::11/64 + $IP addr add dev dummy3 fe80::1/128 + + $IP addr add dev dummy4 2001:db8:101::1/64 + $IP addr add dev dummy4 2001:db8:101::10/64 + $IP addr add dev dummy4 2001:db8:101::11/64 + $IP addr add dev dummy4 2001:db8:101::12/64 + $IP addr add dev dummy4 2001:db8:101::13/64 + $IP addr add dev dummy4 2001:db8:101::14/64 + $IP addr add dev dummy5 2001:db8:101::1/64 + $IP addr add dev dummy5 2001:db8:101::11/64 + + # Single device using src address + $IP route add 2001:db8:110::/64 dev dummy3 src 2001:db8:101::10 + # Two devices with the same source address + $IP route add 2001:db8:111::/64 dev dummy3 src 2001:db8:101::11 + # VRF with single device using src address + $IP route add vrf red 2001:db8:110::/64 dev dummy6 src 2001:db8:101::10 + # VRF with two devices using src address + $IP route add vrf red 2001:db8:111::/64 dev dummy6 src 2001:db8:101::11 + # src address and nexthop dev in same VRF + $IP route add 2001:db8:112::/64 dev dummy3 src 2001:db8:101::12 + $IP route add vrf red 2001:db8:112::/64 dev dummy6 src 2001:db8:101::12 + # src address and nexthop device in different VRF + $IP route add 2001:db8:113::/64 dev lo src 2001:db8:101::13 + $IP route add vrf red 2001:db8:113::/64 dev lo src 2001:db8:101::13 + # Same FIB info with different table ID + $IP route add 2001:db8:114::/64 via 2001:db8:101::2 src 2001:db8:101::14 + $IP route add vrf red 2001:db8:114::/64 via 2001:db8:101::2 src 2001:db8:101::14 + # table ID 0 + $IP route add table 0 2001:db8:115::/64 via 2001:db8:101::2 src 2001:db8:101::15 + # Link local source route + $IP route add 2001:db8:116::/64 dev dummy2 src fe80::1 + $IP route add 2001:db8:117::/64 dev dummy3 src fe80::1 + set +e + + echo " Single device using src address" + + $IP addr del dev dummy1 2001:db8:101::10/64 + $IP -6 route show | grep -q "src 2001:db8:101::10 " + log_test $? 1 "Prefsrc removed when src address removed on other device" + + echo " Two devices with the same source address" + + $IP addr del dev dummy1 2001:db8:101::11/64 + $IP -6 route show | grep -q "src 2001:db8:101::11 " + log_test $? 0 "Prefsrc not removed when src address exist on other device" + + echo " VRF with single device using src address" + + $IP addr del dev dummy4 2001:db8:101::10/64 + $IP -6 route show vrf red | grep -q "src 2001:db8:101::10 " + log_test $? 1 "Prefsrc removed when src address removed on other device" + + echo " VRF with two devices using src address" + + $IP addr del dev dummy4 2001:db8:101::11/64 + $IP -6 route show vrf red | grep -q "src 2001:db8:101::11 " + log_test $? 0 "Prefsrc not removed when src address exist on other device" + + echo " src address and nexthop dev in same VRF" + + $IP addr del dev dummy4 2001:db8:101::12/64 + $IP -6 route show vrf red | grep -q "src 2001:db8:101::12 " + log_test $? 1 "Prefsrc removed from VRF when source address deleted" + $IP -6 route show | grep -q " src 2001:db8:101::12 " + log_test $? 0 "Prefsrc in default VRF not removed" + + $IP addr add dev dummy4 2001:db8:101::12/64 + $IP route replace vrf red 2001:db8:112::/64 dev dummy6 src 2001:db8:101::12 + $IP addr del dev dummy1 2001:db8:101::12/64 + $IP -6 route show vrf red | grep -q "src 2001:db8:101::12 " + log_test $? 0 "Prefsrc not removed from VRF when source address exist" + $IP -6 route show | grep -q " src 2001:db8:101::12 " + log_test $? 1 "Prefsrc in default VRF removed" + + echo " src address and nexthop device in different VRF" + + $IP addr del dev dummy4 2001:db8:101::13/64 + $IP -6 route show vrf red | grep -q "src 2001:db8:101::13 " + log_test $? 0 "Prefsrc not removed from VRF when nexthop dev in diff VRF" + $IP -6 route show | grep -q " src 2001:db8:101::13 " + log_test $? 0 "Prefsrc not removed in default VRF" + + $IP addr add dev dummy4 2001:db8:101::13/64 + $IP addr del dev dummy1 2001:db8:101::13/64 + $IP -6 route show vrf red | grep -q "src 2001:db8:101::13 " + log_test $? 1 "Prefsrc removed from VRF when nexthop dev in diff VRF" + $IP -6 route show | grep -q " src 2001:db8:101::13 " + log_test $? 1 "Prefsrc removed in default VRF" + + echo " Same FIB info with different table ID" + + $IP addr del dev dummy4 2001:db8:101::14/64 + $IP -6 route show vrf red | grep -q "src 2001:db8:101::14 " + log_test $? 1 "Prefsrc removed from VRF when source address deleted" + $IP -6 route show | grep -q " src 2001:db8:101::14 " + log_test $? 0 "Prefsrc in default VRF not removed" + + $IP addr add dev dummy4 2001:db8:101::14/64 + $IP route replace vrf red 2001:db8:114::/64 via 2001:db8:101::2 src 2001:db8:101::14 + $IP addr del dev dummy1 2001:db8:101::14/64 + $IP -6 route show vrf red | grep -q "src 2001:db8:101::14 " + log_test $? 0 "Prefsrc not removed from VRF when source address exist" + $IP -6 route show | grep -q " src 2001:db8:101::14 " + log_test $? 1 "Prefsrc in default VRF removed" + + echo " Table ID 0" + + $IP addr del dev dummy1 2001:db8:101::15/64 + $IP -6 route show | grep -q "src 2001:db8:101::15" + log_test $? 1 "Prefsrc removed from default VRF when source address deleted" + + echo " Link local source route" + $IP addr del dev dummy1 fe80::1/128 + $IP -6 route show | grep -q "2001:db8:116::/64 dev dummy2 src fe80::1" + log_test $? 0 "Prefsrc not removed when delete ll addr from other dev" + $IP addr del dev dummy2 fe80::1/128 + $IP -6 route show | grep -q "2001:db8:116::/64 dev dummy2 src fe80::1" + log_test $? 1 "Prefsrc removed when delete ll addr" + $IP -6 route show | grep -q "2001:db8:117::/64 dev dummy3 src fe80::1" + log_test $? 0 "Prefsrc not removed when delete ll addr from other dev" + $IP addr add dev dummy1 fe80::1/128 + $IP addr del dev dummy3 fe80::1/128 + $IP -6 route show | grep -q "2001:db8:117::/64 dev dummy3 src fe80::1" + log_test $? 1 "Prefsrc removed even ll addr still exist on other dev" + + for i in $(seq 6); do + $IP li del dummy${i} + done + cleanup +} ipv4_route_v6_gw_test() { @@ -2211,6 +2371,7 @@ do ipv6_addr_metric) ipv6_addr_metric_test;; ipv4_addr_metric) ipv4_addr_metric_test;; ipv4_del_addr) ipv4_del_addr_test;; + ipv6_del_addr) ipv6_del_addr_test;; ipv6_route_metrics) ipv6_route_metrics_test;; ipv4_route_metrics) ipv4_route_metrics_test;; ipv4_route_v6_gw) ipv4_route_v6_gw_test;;
Add a test case for IPv6 source address delete. As David suggested, add tests: - Single device using src address - Two devices with the same source address - VRF with single device using src address - VRF with two devices using src address As Ido points out, in IPv6, the preferred source address is looked up in the same VRF as the first nexthop device. This will give us similar results to IPv4 if the route is installed in the same VRF as the nexthop device, but not when the nexthop device is enslaved to a different VRF. So add tests: - src address and nexthop dev in same VR - src address and nexthop device in different VRF The link local address delete logic is different from the global address. It should only affect the associate device it bonds to. Add tests cases for link local address testing. The table 0 and same FIB info tests are copied from IPv4 tests. Here is the test result: IPv6 delete address route tests Single device using src address TEST: Prefsrc removed when src address removed on other device [ OK ] Two devices with the same source address TEST: Prefsrc not removed when src address exist on other device [ OK ] VRF with single device using src address TEST: Prefsrc removed when src address removed on other device [ OK ] VRF with two devices using src address TEST: Prefsrc not removed when src address exist on other device [ OK ] src address and nexthop dev in same VRF TEST: Prefsrc removed from VRF when source address deleted [ OK ] TEST: Prefsrc in default VRF not removed [ OK ] TEST: Prefsrc not removed from VRF when source address exist [ OK ] TEST: Prefsrc in default VRF removed [ OK ] src address and nexthop device in different VRF TEST: Prefsrc not removed from VRF when nexthop dev in diff VRF [ OK ] TEST: Prefsrc not removed in default VRF [ OK ] TEST: Prefsrc removed from VRF when nexthop dev in diff VRF [ OK ] TEST: Prefsrc removed in default VRF [ OK ] Same FIB info with different table ID TEST: Prefsrc removed from VRF when source address deleted [ OK ] TEST: Prefsrc in default VRF not removed [ OK ] TEST: Prefsrc not removed from VRF when source address exist [ OK ] TEST: Prefsrc in default VRF removed [ OK ] Table ID 0 TEST: Prefsrc removed from default VRF when source address deleted [ OK ] Link local source route TEST: Prefsrc not removed when delete ll addr from other dev [ OK ] TEST: Prefsrc removed when delete ll addr [ OK ] TEST: Prefsrc not removed when delete ll addr from other dev [ OK ] TEST: Prefsrc removed even ll addr still exist on other dev [ OK ] Tests passed: 21 Tests failed: 0 Suggested-by: Ido Schimmel <idosch@idosch.org> Suggested-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> --- v7: add more tests as Ido and David suggested. Remove the IPv4 part as I want to focus on the IPv6 fixes. --- tools/testing/selftests/net/fib_tests.sh | 163 ++++++++++++++++++++++- 1 file changed, 162 insertions(+), 1 deletion(-)