@@ -19,6 +19,30 @@
#include "ksz_common.h"
#include "ksz9477.h"
+/**
+ * struct ksz9477_drive_strength - drive strength mapping
+ * @reg_val: register value
+ * @milliamp: milliamp value
+ */
+struct ksz9477_drive_strength {
+ u32 reg_val;
+ u32 milliamp;
+};
+
+/* Drive strength mapping.
+ * This values are not documented and taken from vendor's reference driver.
+ */
+static const struct ksz9477_drive_strength ksz9477_drive_strengths[] = {
+ { SW_DRIVE_STRENGTH_2MA, 2000 },
+ { SW_DRIVE_STRENGTH_4MA, 4000 },
+ { SW_DRIVE_STRENGTH_8MA, 8000 },
+ { SW_DRIVE_STRENGTH_12MA, 12000 },
+ { SW_DRIVE_STRENGTH_16MA, 16000 },
+ { SW_DRIVE_STRENGTH_20MA, 20000 },
+ { SW_DRIVE_STRENGTH_24MA, 24000 },
+ { SW_DRIVE_STRENGTH_28MA, 28000 },
+};
+
static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
{
regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0);
@@ -1097,11 +1121,107 @@ int ksz9477_enable_stp_addr(struct ksz_device *dev)
return 0;
}
+/**
+ * ksz9477_drive_strength_to_reg() - convert milliamp value to register value
+ * @milliamp: milliamp value
+ *
+ * Return: register value
+ */
+static u32 ksz9477_drive_strength_to_reg(u32 milliamp)
+{
+ size_t array_size = ARRAY_SIZE(ksz9477_drive_strengths);
+ int i;
+
+ for (i = 0; i < array_size; i++) {
+ if (ksz9477_drive_strengths[i].milliamp >= milliamp)
+ return ksz9477_drive_strengths[i].reg_val;
+ }
+
+ /* return the highest value if the requested value is too high */
+ return ksz9477_drive_strengths[array_size - 1].reg_val;
+}
+
+/**
+ * ksz9477_parse_drive_strength() - parse drive strength from device tree
+ * @dev: ksz device
+ *
+ * Return: 0 on success, error code otherwise
+ */
+static int ksz9477_parse_drive_strength(struct ksz_device *dev)
+{
+ struct of_prop {
+ const char *name;
+ int offset;
+ int value;
+ } of_props[] = {
+ {
+ "microchip,hi-drive-strength-microamp",
+ SW_HI_SPEED_DRIVE_STRENGTH_S,
+ -1
+ },
+ {
+ "microchip,lo-drive-strength-microamp",
+ SW_LO_SPEED_DRIVE_STRENGTH_S,
+ -1
+ },
+ };
+ struct device_node *np = dev->dev->of_node;
+ bool found = false;
+ int ret;
+ u8 val;
+
+ if (!np)
+ return 0;
+
+ for (int i = 0; i < ARRAY_SIZE(of_props); i++) {
+ ret = of_property_read_u32(np, of_props[i].name,
+ &of_props[i].value);
+ if (ret && ret != -EINVAL)
+ dev_warn(dev->dev, "Failed to read %s\n",
+ of_props[i].name);
+ if (ret)
+ continue;
+
+ if (of_props[i].value > 28000 || of_props[i].value < 2000) {
+ dev_warn(dev->dev, "Drive strength value is out of range: %d. Supported values are (2000 - 28000)\n",
+ of_props[i].value);
+ continue;
+ }
+
+ found = true;
+ }
+
+ if (!found)
+ return 0;
+
+ ret = ksz_read8(dev, REG_SW_IO_STRENGTH__1, &val);
+ if (ret)
+ return ret;
+
+ for (int i = 0; i < ARRAY_SIZE(of_props); i++) {
+ int strength_val;
+
+ if (of_props[i].value == -1)
+ continue;
+
+ strength_val = ksz9477_drive_strength_to_reg(of_props[i].value);
+
+ val &= ~(SW_DRIVE_STRENGTH_M << of_props[i].offset);
+ val |= strength_val << of_props[i].offset;
+ }
+
+ return ksz_write8(dev, REG_SW_IO_STRENGTH__1, val);
+}
+
int ksz9477_setup(struct dsa_switch *ds)
{
struct ksz_device *dev = ds->priv;
int ret = 0;
+ ret = ksz9477_parse_drive_strength(dev);
+ if (ret)
+ return ret;
+
ds->mtu_enforcement_ingress = true;
/* Required for port partitioning. */
Add device tree based drive strength configuration support. It is needed to pass EMI validation on our hardware. Configuration values are based on the vendor's reference driver. Tested on KSZ9563R. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/dsa/microchip/ksz9477.c | 120 ++++++++++++++++++++++++++++ 1 file changed, 120 insertions(+)