diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 48360cc9fc68a..49459a50dbc81 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON)	+= ksz_switch.o
 ksz_switch-objs := ksz_common.o
-ksz_switch-objs += ksz9477.o
+ksz_switch-objs += ksz9477.o ksz9477_acl.o ksz9477_tc_flower.o
 ksz_switch-objs += ksz8795.o
 ksz_switch-objs += lan937x_main.o
 
diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h
index a6f425866a29a..7a59923ff7b5c 100644
--- a/drivers/net/dsa/microchip/ksz9477.h
+++ b/drivers/net/dsa/microchip/ksz9477.h
@@ -57,4 +57,40 @@ int ksz9477_switch_init(struct ksz_device *dev);
 void ksz9477_switch_exit(struct ksz_device *dev);
 void ksz9477_port_queue_split(struct ksz_device *dev, int port);
 
+int ksz9477_port_acl_init(struct ksz_device *dev, int port);
+void ksz9477_port_acl_free(struct ksz_device *dev, int port);
+int ksz9477_cls_flower_add(struct dsa_switch *ds, int port,
+			   struct flow_cls_offload *cls, bool ingress);
+int ksz9477_cls_flower_del(struct dsa_switch *ds, int port,
+			   struct flow_cls_offload *cls, bool ingress);
+
+#define KSZ9477_ACL_ENTRY_SIZE		18
+#define KSZ9477_ACL_MAX_ENTRIES		16
+
+struct ksz9477_acl_entry {
+	u8 entry[KSZ9477_ACL_ENTRY_SIZE];
+	unsigned long cookie;
+	u32 prio;
+};
+
+struct ksz9477_acl_entries {
+	struct ksz9477_acl_entry entries[KSZ9477_ACL_MAX_ENTRIES];
+	int entries_count;
+};
+
+struct ksz9477_acl_priv {
+	struct ksz9477_acl_entries acles;
+};
+
+void ksz9477_acl_remove_entries(struct ksz_device *dev, int port,
+				struct ksz9477_acl_entries *acles,
+				unsigned long cookie);
+int ksz9477_acl_write_list(struct ksz_device *dev, int port);
+int ksz9477_sort_acl_entries(struct ksz_device *dev, int port);
+void ksz9477_acl_action_rule_cfg(u8 *entry, bool force_prio, u8 prio_val);
+void ksz9477_acl_processing_rule_set_action(u8 *entry, u8 action_idx);
+void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port,
+				  __be16 ethtype, u8 *src_mac, u8 *dst_mac,
+				  unsigned long cookie, u32 prio);
+
 #endif
diff --git a/drivers/net/dsa/microchip/ksz9477_acl.c b/drivers/net/dsa/microchip/ksz9477_acl.c
new file mode 100644
index 0000000000000..2dd2e33b72287
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477_acl.c
@@ -0,0 +1,1427 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2023 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+/* Access Control List (ACL) structure:
+ *
+ * There are multiple groups of registers involved in ACL configuration:
+ *
+ * - Matching Rules: These registers define the criteria for matching incoming
+ *   packets based on their header information (Layer 2 MAC, Layer 3 IP, or
+ *   Layer 4 TCP/UDP). Different register settings are used depending on the
+ *   matching rule mode (MD) and the Enable (ENB) settings.
+ *
+ * - Action Rules: These registers define how the ACL should modify the packet's
+ *   priority, VLAN tag priority, and forwarding map once a matching rule has
+ *   been triggered. The settings vary depending on whether the matching rule is
+ *   in Count Mode (MD = 01 and ENB = 00) or not.
+ *
+ * - Processing Rules: These registers control the overall behavior of the ACL,
+ *   such as selecting which matching rule to apply first, enabling/disabling
+ *   specific rules, or specifying actions for matched packets.
+ *
+ * ACL Structure:
+ *                             +----------------------+
+ * +----------------------+    |    (optional)        |
+ * |    Matching Rules    |    |    Matching Rules    |
+ * |    (Layer 2, 3, 4)   |    |    (Layer 2, 3, 4)   |
+ * +----------------------+    +----------------------+
+ *             |                            |
+ *             \___________________________/
+ *                          v
+ *               +----------------------+
+ *               |   Processing Rules   |
+ *               | (action idx,         |
+ *               | matching rule set)   |
+ *               +----------------------+
+ *                          |
+ *                          v
+ *               +----------------------+
+ *               |    Action Rules      |
+ *               | (Modify Priority,    |
+ *               |  Forwarding Map,     |
+ *               |  VLAN tag, etc)      |
+ *               +----------------------+
+ */
+
+#include <linux/bitops.h>
+
+#include "ksz9477.h"
+#include "ksz9477_reg.h"
+#include "ksz_common.h"
+
+#define KSZ9477_PORT_ACL_0		0x600
+
+enum ksz9477_acl_port_access {
+	KSZ9477_ACL_PORT_ACCESS_0  = 0x00,
+	KSZ9477_ACL_PORT_ACCESS_1  = 0x01,
+	KSZ9477_ACL_PORT_ACCESS_2  = 0x02,
+	KSZ9477_ACL_PORT_ACCESS_3  = 0x03,
+	KSZ9477_ACL_PORT_ACCESS_4  = 0x04,
+	KSZ9477_ACL_PORT_ACCESS_5  = 0x05,
+	KSZ9477_ACL_PORT_ACCESS_6  = 0x06,
+	KSZ9477_ACL_PORT_ACCESS_7  = 0x07,
+	KSZ9477_ACL_PORT_ACCESS_8  = 0x08,
+	KSZ9477_ACL_PORT_ACCESS_9  = 0x09,
+	KSZ9477_ACL_PORT_ACCESS_A  = 0x0A,
+	KSZ9477_ACL_PORT_ACCESS_B  = 0x0B,
+	KSZ9477_ACL_PORT_ACCESS_C  = 0x0C,
+	KSZ9477_ACL_PORT_ACCESS_D  = 0x0D,
+	KSZ9477_ACL_PORT_ACCESS_E  = 0x0E,
+	KSZ9477_ACL_PORT_ACCESS_F  = 0x0F,
+	KSZ9477_ACL_PORT_ACCESS_10 = 0x10,
+	KSZ9477_ACL_PORT_ACCESS_11 = 0x11
+};
+
+#define KSZ9477_ACL_MD_MASK			GENMASK(5, 4)
+#define KSZ9477_ACL_MD_DISABLE			0
+#define KSZ9477_ACL_MD_L2_MAC			1
+#define KSZ9477_ACL_MD_L3_IP			2
+#define KSZ9477_ACL_MD_L4_TCP_UDP		3
+
+#define KSZ9477_ACL_ENB_MASK			GENMASK(3, 2)
+#define KSZ9477_ACL_ENB_L2_COUNTER		0
+#define KSZ9477_ACL_ENB_L2_TYPE			1
+#define KSZ9477_ACL_ENB_L2_MAC			2
+#define KSZ9477_ACL_ENB_L2_MAC_TYPE		3
+
+/* only IPv4 src or dst can be used with mask */
+#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_MASK	1
+/* only IPv4 src and dst can be used without mask */
+#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_SRC_DST	2
+
+#define KSZ9477_ACL_ENB_L4_IP_PROTO	        0
+#define KSZ9477_ACL_ENB_L4_TCP_SRC_DST_PORT	1
+#define KSZ9477_ACL_ENB_L4_UDP_SRC_DST_PORT	2
+#define KSZ9477_ACL_ENB_L4_TCP_SEQ_NUMBER	3
+
+#define KSZ9477_ACL_SD_SRC			BIT(1)
+#define KSZ9477_ACL_SD_DST			0
+#define KSZ9477_ACL_EQ_EQUAL			BIT(0)
+#define KSZ9477_ACL_EQ_NOT_EQUAL		0
+
+#define KSZ9477_ACL_PM_M			GENMASK(7, 6)
+#define KSZ9477_ACL_PM_DISABLE			0
+#define KSZ9477_ACL_PM_HIGHER			1
+#define KSZ9477_ACL_PM_LOWER			2
+#define KSZ9477_ACL_PM_REPLACE			3
+#define KSZ9477_ACL_P_M				GENMASK(5, 3)
+
+#define KSZ9477_PORT_ACL_CTRL_0			0x0612
+
+#define KSZ9477_ACL_WRITE_DONE			BIT(6)
+#define KSZ9477_ACL_READ_DONE			BIT(5)
+#define KSZ9477_ACL_WRITE			BIT(4)
+#define KSZ9477_ACL_INDEX_M			GENMASK(3, 0)
+
+/**
+ * ksz9477_dump_acl_index - Print the ACL entry at the specified index
+ *
+ * @dev: Pointer to the ksz9477 device structure.
+ * @acle: Pointer to the ACL entry array.
+ * @index: The index of the ACL entry to print.
+ *
+ * This function prints the details of an ACL entry, located at a particular
+ * index within the ksz9477 device's ACL table. It omits printing entries that
+ * are empty.
+ *
+ * Return: 1 if the entry is non-empty and printed, 0 otherwise.
+ */
+static int ksz9477_dump_acl_index(struct ksz_device *dev,
+				  struct ksz9477_acl_entry *acle, int index)
+{
+	bool empty = true;
+	char buf[64];
+	u8 *entry;
+	int i;
+
+	entry = &acle[index].entry[0];
+	for (i = 0; i <= KSZ9477_ACL_PORT_ACCESS_11; i++) {
+		if (entry[i])
+			empty = false;
+
+		sprintf(buf + (i * 3), "%02x ", entry[i]);
+	}
+
+	/* no need to print empty entries */
+	if (empty)
+		return 0;
+
+	dev_err(dev->dev, " Entry %02d, prio: %02d : %s", index,
+		acle[index].prio, buf);
+
+	return 1;
+}
+
+/**
+ * ksz9477_dump_acl - Print ACL entries
+ *
+ * @dev: Pointer to the device structure.
+ * @acle: Pointer to the ACL entry array.
+ */
+static void ksz9477_dump_acl(struct ksz_device *dev,
+			     struct ksz9477_acl_entry *acle)
+{
+	int count = 0;
+	int i;
+
+	for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES; i++)
+		count += ksz9477_dump_acl_index(dev, acle, i);
+
+	if (count != KSZ9477_ACL_MAX_ENTRIES - 1)
+		dev_err(dev->dev, " Empty ACL entries were skipped\n");
+}
+
+/**
+ * ksz9477_acl_is_valid_matching_rule - Check if an ACL entry contains a valid
+ *					matching rule.
+ *
+ * @entry: Pointer to ACL entry buffer
+ *
+ * This function checks if the given ACL entry buffer contains a valid
+ * matching rule by inspecting the Mode (MD) and Enable (ENB) fields.
+ *
+ * Returns: True if it's a valid matching rule, false otherwise.
+ */
+static bool ksz9477_acl_is_valid_matching_rule(u8 *entry)
+{
+	u8 val1, md, enb;
+
+	val1 = entry[KSZ9477_ACL_PORT_ACCESS_1];
+
+	md = FIELD_GET(KSZ9477_ACL_MD_MASK, val1);
+	if (md == KSZ9477_ACL_MD_DISABLE)
+		return false;
+
+	if (md == KSZ9477_ACL_MD_L2_MAC) {
+		/* L2 counter is not support, so it is not valid rule for now */
+		enb = FIELD_GET(KSZ9477_ACL_ENB_MASK, val1);
+		if (enb == KSZ9477_ACL_ENB_L2_COUNTER)
+			return false;
+	}
+
+	return true;
+}
+
+/**
+ * ksz9477_acl_get_cont_entr - Get count of contiguous ACL entries and validate
+ *                             the matching rules.
+ * @dev: Pointer to the KSZ9477 device structure.
+ * @port: Port number.
+ * @index: Index of the starting ACL entry.
+ *
+ * Based on the KSZ9477 switch's Access Control List (ACL) system, the RuleSet
+ * in an ACL entry indicates which entries contain Matching rules linked to it.
+ * This RuleSet is represented by two registers: KSZ9477_ACL_PORT_ACCESS_E and
+ * KSZ9477_ACL_PORT_ACCESS_F. Each bit set in these registers corresponds to
+ * an entry containing a Matching rule for this RuleSet.
+ *
+ * For a single Matching rule linked, only one bit is set. However, when an
+ * entry links multiple Matching rules, forming what's termed a 'complex rule',
+ * multiple bits are set in these registers.
+ *
+ * This function checks that, for complex rules, the entries containing the
+ * linked Matching rules are contiguous in terms of their indices. It calculates
+ * and returns the number of these contiguous entries.
+ *
+ * Return: Count of contiguous linked entries if part of a complex rule and
+ * validation is successful. Returns -EINVAL in case of validation failures, or
+ * 0 if the entry is empty and can be safely overwritten.
+ */
+static int ksz9477_acl_get_cont_entr(struct ksz_device *dev, int port,
+				     int index)
+{
+	struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+	struct ksz9477_acl_entries *acles = &acl->acles;
+	int start_idx, end_idx, contiguous_count;
+	unsigned long val;
+	u8 vale, valf;
+	u8 *entry;
+	int i;
+
+	entry = &acles->entries[index].entry[0];
+	vale = entry[KSZ9477_ACL_PORT_ACCESS_E];
+	valf = entry[KSZ9477_ACL_PORT_ACCESS_F];
+
+	val = (vale << 8) | valf;
+
+	/* If no bits are set, return an appropriate value or error */
+	if (!val) {
+		if (ksz9477_acl_is_valid_matching_rule(entry)) {
+			/* Looks like we are about to corrupt some complex rule.
+			 * Do not print an error here, as this is a normal case
+			 * when we are trying to find a free or starting entry.
+			 */
+			dev_dbg(dev->dev, "ACL: entry %d starting with a valid matching rule, but no bits set in RuleSet\n",
+				index);
+			return -ENOTEMPTY;
+		}
+
+		/* This entry does not contain a valid matching rule */
+		return 0;
+	}
+
+	start_idx = find_first_bit((unsigned long *)&val, 16);
+	end_idx = find_last_bit((unsigned long *)&val, 16);
+
+	/* Calculate the contiguous count */
+	contiguous_count = end_idx - start_idx + 1;
+
+	/* Check if the number of bits set in val matches our calculated count */
+	if (contiguous_count != hweight16(val)) {
+		/* Probably we have a fragmented complex rule, which is not
+		 * supported by this driver.
+		 */
+		dev_err(dev->dev, "ACL: number of bits set in RuleSet does not match calculated count\n");
+		return -EINVAL;
+	}
+
+	/* loop over the contiguous entries and check for valid matching rules */
+	for (i = start_idx; i <= end_idx; i++) {
+		u8 *current_entry = &acles->entries[i].entry[0];
+
+		if (!ksz9477_acl_is_valid_matching_rule(current_entry)) {
+			/* we have something linked without a valid matching
+			 * rule. ACL table?
+			 */
+			dev_err(dev->dev, "ACL: entry %d does not contain a valid matching rule\n",
+				i);
+			return -EINVAL;
+		}
+
+		if (i > start_idx) {
+			vale = current_entry[KSZ9477_ACL_PORT_ACCESS_E];
+			valf = current_entry[KSZ9477_ACL_PORT_ACCESS_F];
+			/* Following entry should have empty linkage list */
+			if (vale || valf) {
+				dev_err(dev->dev, "ACL: entry %d has non-empty RuleSet linkage\n",
+					i);
+				return -EINVAL;
+			}
+		}
+	}
+
+	return contiguous_count;
+}
+
+/**
+ * ksz9477_acl_update_linkage - Update the RuleSet linkage for an ACL entry
+ *                              after a move operation.
+ *
+ * @dev: Pointer to the ksz_device.
+ * @entry:   Pointer to the ACL entry array.
+ * @old_idx: The original index of the ACL entry before moving.
+ * @new_idx: The new index of the ACL entry after moving.
+ *
+ * This function updates the RuleSet linkage bits for an ACL entry when
+ * it's moved from one position to another in the ACL table. The RuleSet
+ * linkage is represented by two 8-bit registers, which are combined
+ * into a 16-bit value for easier manipulation. The linkage bits are shifted
+ * based on the difference between the old and new index. If any bits are lost
+ * during the shift operation, an error is returned.
+ *
+ * Note: Fragmentation within a RuleSet is not supported. Hence, entries must
+ * be moved as complete blocks, maintaining the integrity of the RuleSet.
+ *
+ * Returns: 0 on success, or -EINVAL if any RuleSet linkage bits are lost
+ * during the move.
+ */
+static int ksz9477_acl_update_linkage(struct ksz_device *dev, u8 *entry,
+				      u16 old_idx, u16 new_idx)
+{
+	unsigned int original_bit_count;
+	unsigned long rule_linkage;
+	u8 vale, valf, val0;
+	int shift;
+
+	val0 = entry[KSZ9477_ACL_PORT_ACCESS_0];
+	vale = entry[KSZ9477_ACL_PORT_ACCESS_E];
+	valf = entry[KSZ9477_ACL_PORT_ACCESS_F];
+
+	/* Combine the two u8 values into one u16 for easier manipulation */
+	rule_linkage = (vale << 8) | valf;
+	original_bit_count = hweight16(rule_linkage);
+
+	/* Even if HW is able to handle fragmented RuleSet, we don't support it.
+	 * RuleSet is filled only for the first entry of the set.
+	 */
+	if (!rule_linkage)
+		return 0;
+
+	if (val0 != old_idx) {
+		dev_err(dev->dev, "ACL: entry %d has unxpexted ActionRule linkage: %d\n",
+			old_idx, val0);
+		return -EINVAL;
+	}
+
+	val0 = new_idx;
+
+	/* Calculate the number of positions to shift */
+	shift = new_idx - old_idx;
+
+	/* Shift the RuleSet */
+	if (shift > 0)
+		rule_linkage <<= shift;
+	else
+		rule_linkage >>= -shift;
+
+	/* Check that no bits were lost in the process */
+	if (original_bit_count != hweight16(rule_linkage)) {
+		dev_err(dev->dev, "ACL RuleSet linkage bits lost during move\n");
+		return -EINVAL;
+	}
+
+	entry[KSZ9477_ACL_PORT_ACCESS_0] = val0;
+
+	/* Update the RuleSet bitfields in the entry */
+	entry[KSZ9477_ACL_PORT_ACCESS_E] = (rule_linkage >> 8) & 0xFF;
+	entry[KSZ9477_ACL_PORT_ACCESS_F] = rule_linkage & 0xFF;
+
+	return 0;
+}
+
+/**
+ * ksz9477_validate_and_get_src_count - Validate source and destination indices
+ *					and determine the source entry count.
+ * @dev: Pointer to the KSZ device structure.
+ * @port: Port number on the KSZ device where the ACL entries reside.
+ * @src_idx: Index of the starting ACL entry that needs to be validated.
+ * @dst_idx: Index of the destination where the source entries are intended to
+ *	     be moved.
+ * @src_count: Pointer to the variable that will hold the number of contiguous
+ *	     source entries if the validation passes.
+ * @dst_count: Pointer to the variable that will hold the number of contiguous
+ *	     destination entries if the validation passes.
+ *
+ * This function performs validation on the source and destination indices
+ * provided for ACL entries. It checks if the indices are within the valid
+ * range, and if the source entries are contiguous. Additionally, the function
+ * ensures that there's adequate space at the destination for the source entries
+ * and that the destination index isn't in the middle of a RuleSet. If all
+ * validations pass, the function returns the number of contiguous source and
+ * destination entries.
+ *
+ * Return: 0 on success.
+ *         Returns a negative error code if any validation check fails.
+ */
+static int ksz9477_validate_and_get_src_count(struct ksz_device *dev, int port,
+					      int src_idx, int dst_idx,
+					      int *src_count, int *dst_count)
+{
+	int ret;
+
+	if (src_idx >= KSZ9477_ACL_MAX_ENTRIES ||
+	    dst_idx >= KSZ9477_ACL_MAX_ENTRIES) {
+		dev_err(dev->dev, "ACL: invalid entry index\n");
+		return -EINVAL;
+	}
+
+	/* Nothing to do */
+	if (src_idx == dst_idx)
+		return 0;
+
+	/* Validate if the source entries are contiguous */
+	ret = ksz9477_acl_get_cont_entr(dev, port, src_idx);
+	if (ret < 0)
+		return ret;
+	*src_count = ret;
+
+	if (!*src_count) {
+		dev_err(dev->dev, "ACL: source entry is empty\n");
+		return -EINVAL;
+	}
+
+	if (dst_idx + *src_count >= KSZ9477_ACL_MAX_ENTRIES) {
+		dev_err(dev->dev, "ACL: Not enough space at the destination. Move operation will fail.\n");
+		return -EINVAL;
+	}
+
+	/* Validate if the destination entry is empty or not in the middle of
+	 * a RuleSet.
+	 */
+	ret = ksz9477_acl_get_cont_entr(dev, port, dst_idx);
+	if (ret < 0)
+		return ret;
+	*dst_count = ret;
+
+	return 0;
+}
+
+/**
+ * ksz9477_move_entries_downwards - Move a range of ACL entries downwards in
+ *				    the list.
+ * @dev: Pointer to the KSZ device structure.
+ * @acles: Pointer to the structure encapsulating all the ACL entries.
+ * @start_idx: Starting index of the entries to be relocated.
+ * @num_entries_to_move: Number of consecutive entries to be relocated.
+ * @end_idx: Destination index where the first entry should be situated post
+ *           relocation.
+ *
+ * This function is responsible for rearranging a specific block of ACL entries
+ * by shifting them downwards in the list based on the supplied source and
+ * destination indices. It ensures that the linkage between the ACL entries is
+ * maintained accurately after the relocation.
+ *
+ * Return: 0 on successful relocation of entries, otherwise returns a negative
+ * error code.
+ */
+static int ksz9477_move_entries_downwards(struct ksz_device *dev,
+					  struct ksz9477_acl_entries *acles,
+					  u16 start_idx,
+					  u16 num_entries_to_move,
+					  u16 end_idx)
+{
+	struct ksz9477_acl_entry *e;
+	int ret, i;
+
+	for (i = start_idx; i < end_idx; i++) {
+		e = &acles->entries[i];
+		*e = acles->entries[i + num_entries_to_move];
+
+		ret = ksz9477_acl_update_linkage(dev, &e->entry[0],
+						 i + num_entries_to_move, i);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ksz9477_move_entries_upwards - Move a range of ACL entries upwards in the
+ *				  list.
+ * @dev: Pointer to the KSZ device structure.
+ * @acles: Pointer to the structure holding all the ACL entries.
+ * @start_idx: The starting index of the entries to be moved.
+ * @num_entries_to_move: Number of contiguous entries to be moved.
+ * @target_idx: The destination index where the first entry should be placed
+ *		after moving.
+ *
+ * This function rearranges a chunk of ACL entries by moving them upwards
+ * in the list based on the given source and destination indices. The reordering
+ * process preserves the linkage between entries by updating it accordingly.
+ *
+ * Return: 0 if the entries were successfully moved, otherwise a negative error
+ * code.
+ */
+static int ksz9477_move_entries_upwards(struct ksz_device *dev,
+					struct ksz9477_acl_entries *acles,
+					u16 start_idx, u16 num_entries_to_move,
+					u16 target_idx)
+{
+	struct ksz9477_acl_entry *e;
+	int ret, i, b;
+
+	for (i = start_idx; i > target_idx; i--) {
+		b = i + num_entries_to_move - 1;
+
+		e = &acles->entries[b];
+		*e = acles->entries[i - 1];
+
+		ret = ksz9477_acl_update_linkage(dev, &e->entry[0], i - 1, b);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ksz9477_acl_move_entries - Move a block of contiguous ACL entries from a
+ *			      source to a destination index.
+ * @dev: Pointer to the KSZ9477 device structure.
+ * @port: Port number.
+ * @src_idx: Index of the starting source ACL entry.
+ * @dst_idx: Index of the starting destination ACL entry.
+ *
+ * This function aims to move a block of contiguous ACL entries from the source
+ * index to the destination index while ensuring the integrity and validity of
+ * the ACL table.
+ *
+ * In case of any errors during the adjustments or copying, the function will
+ * restore the ACL entries to their original state from the backup.
+ *
+ * Return: 0 if the move operation is successful. Returns -EINVAL for validation
+ * errors or other error codes based on specific failure conditions.
+ */
+static int ksz9477_acl_move_entries(struct ksz_device *dev, int port,
+				    u16 src_idx, u16 dst_idx)
+{
+	struct ksz9477_acl_entry buffer[KSZ9477_ACL_MAX_ENTRIES];
+	struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+	struct ksz9477_acl_entries *acles = &acl->acles;
+	int src_count, ret, dst_count;
+
+	ret = ksz9477_validate_and_get_src_count(dev, port, src_idx, dst_idx,
+						 &src_count, &dst_count);
+	if (ret)
+		return ret;
+
+	/* In case dst_index is greater than src_index, we need to adjust the
+	 * destination index to account for the entries that will be moved
+	 * downwards and the size of the entry located at dst_idx.
+	 */
+	if (dst_idx > src_idx)
+		dst_idx = dst_idx + dst_count - src_count;
+
+	/* Copy source block to buffer and update its linkage */
+	for (int i = 0; i < src_count; i++) {
+		buffer[i] = acles->entries[src_idx + i];
+		ret = ksz9477_acl_update_linkage(dev, &buffer[i].entry[0],
+						 src_idx + i, dst_idx + i);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Adjust other entries and their linkage based on destination */
+	if (dst_idx > src_idx) {
+		ret = ksz9477_move_entries_downwards(dev, acles, src_idx,
+						     src_count, dst_idx);
+	} else {
+		ret = ksz9477_move_entries_upwards(dev, acles, src_idx,
+						   src_count, dst_idx);
+	}
+	if (ret < 0)
+		return ret;
+
+	/* Copy buffer to destination block */
+	for (int i = 0; i < src_count; i++)
+		acles->entries[dst_idx + i] = buffer[i];
+
+	return 0;
+}
+
+/**
+ * ksz9477_get_next_block_start - Identify the starting index of the next ACL
+ *				  block.
+ * @dev: Pointer to the device structure.
+ * @port: The port number on which the ACL entries are being checked.
+ * @start: The starting index from which the search begins.
+ *
+ * This function looks for the next valid ACL block starting from the provided
+ * 'start' index and returns the beginning index of that block. If the block is
+ * invalid or if it reaches the end of the ACL entries without finding another
+ * block, it returns the maximum ACL entries count.
+ *
+ * Returns:
+ *  - The starting index of the next valid ACL block.
+ *  - KSZ9477_ACL_MAX_ENTRIES if no other valid blocks are found after 'start'.
+ *  - A negative error code if an error occurs while checking.
+ */
+static int ksz9477_get_next_block_start(struct ksz_device *dev, int port,
+					int start)
+{
+	int block_size;
+
+	for (int i = start; i < KSZ9477_ACL_MAX_ENTRIES;) {
+		block_size = ksz9477_acl_get_cont_entr(dev, port, i);
+		if (block_size < 0 && block_size != -ENOTEMPTY)
+			return block_size;
+
+		if (block_size > 0)
+			return i;
+
+		i++;
+	}
+	return KSZ9477_ACL_MAX_ENTRIES;
+}
+
+/**
+ * ksz9477_swap_acl_blocks - Swap two ACL blocks
+ * @dev: Pointer to the device structure.
+ * @port: The port number on which the ACL blocks are to be swapped.
+ * @i: The starting index of the first ACL block.
+ * @j: The starting index of the second ACL block.
+ *
+ * This function is used to swap two ACL blocks present at given indices. The
+ * main purpose is to aid in the sorting and reordering of ACL blocks based on
+ * certain criteria, e.g., priority. It checks the validity of the block at
+ * index 'i', ensuring it's not an empty block, and then proceeds to swap it
+ * with the block at index 'j'.
+ *
+ * Returns:
+ *  - 0 on successful swapping of blocks.
+ *  - -EINVAL if the block at index 'i' is empty.
+ *  - A negative error code if any other error occurs during the swap.
+ */
+static int ksz9477_swap_acl_blocks(struct ksz_device *dev, int port, int i,
+				   int j)
+{
+	int ret, current_block_size;
+
+	current_block_size = ksz9477_acl_get_cont_entr(dev, port, i);
+	if (current_block_size < 0)
+		return current_block_size;
+
+	if (!current_block_size) {
+		dev_err(dev->dev, "ACL: swapping empty entry %d\n", i);
+		return -EINVAL;
+	}
+
+	ret = ksz9477_acl_move_entries(dev, port, i, j);
+	if (ret)
+		return ret;
+
+	ret = ksz9477_acl_move_entries(dev, port, j - current_block_size, i);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/**
+ * ksz9477_sort_acl_entr_no_back - Sort ACL entries for a given port based on
+ *			           priority without backing up entries.
+ * @dev: Pointer to the device structure.
+ * @port: The port number whose ACL entries need to be sorted.
+ *
+ * This function sorts ACL entries of the specified port using a variant of the
+ * bubble sort algorithm. It operates on blocks of ACL entries rather than
+ * individual entries. Each block's starting point is identified and then
+ * compared with subsequent blocks based on their priority. If the current
+ * block has a lower priority than the subsequent block, the two blocks are
+ * swapped.
+ *
+ * This is done in order to maintain an organized order of ACL entries based on
+ * priority, ensuring efficient and predictable ACL rule application.
+ *
+ * Returns:
+ *  - 0 on successful sorting of entries.
+ *  - A negative error code if any issue arises during sorting, e.g.,
+ *    if the function is unable to get the next block start.
+ */
+static int ksz9477_sort_acl_entr_no_back(struct ksz_device *dev, int port)
+{
+	struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+	struct ksz9477_acl_entries *acles = &acl->acles;
+	struct ksz9477_acl_entry *curr, *next;
+	int i, j, ret;
+
+	/* Bubble sort */
+	for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES;) {
+		curr = &acles->entries[i];
+
+		j = ksz9477_get_next_block_start(dev, port, i + 1);
+		if (j < 0)
+			return j;
+
+		while (j < KSZ9477_ACL_MAX_ENTRIES) {
+			next = &acles->entries[j];
+
+			if (curr->prio > next->prio) {
+				ret = ksz9477_swap_acl_blocks(dev, port, i, j);
+				if (ret)
+					return ret;
+			}
+
+			j = ksz9477_get_next_block_start(dev, port, j + 1);
+			if (j < 0)
+				return j;
+		}
+
+		i = ksz9477_get_next_block_start(dev, port, i + 1);
+		if (i < 0)
+			return i;
+	}
+
+	return 0;
+}
+
+/**
+ * ksz9477_sort_acl_entries - Sort the ACL entries for a given port.
+ * @dev: Pointer to the KSZ device.
+ * @port: Port number.
+ *
+ * This function sorts the Access Control List (ACL) entries for a specified
+ * port. Before sorting, a backup of the original entries is created. If the
+ * sorting process fails, the function will log error messages displaying both
+ * the original and attempted sorted entries, and then restore the original
+ * entries from the backup.
+ *
+ * Return: 0 if the sorting succeeds, otherwise a negative error code.
+ */
+int ksz9477_sort_acl_entries(struct ksz_device *dev, int port)
+{
+	struct ksz9477_acl_entry backup[KSZ9477_ACL_MAX_ENTRIES];
+	struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+	struct ksz9477_acl_entries *acles = &acl->acles;
+	int ret;
+
+	/* create a backup of the ACL entries, if something goes wrong
+	 * we can restore the ACL entries.
+	 */
+	memcpy(backup, acles->entries, sizeof(backup));
+
+	ret = ksz9477_sort_acl_entr_no_back(dev, port);
+	if (ret) {
+		dev_err(dev->dev, "ACL: failed to sort entries for port %d\n",
+			port);
+		dev_err(dev->dev, "ACL dump before sorting:\n");
+		ksz9477_dump_acl(dev, backup);
+		dev_err(dev->dev, "ACL dump after sorting:\n");
+		ksz9477_dump_acl(dev, acles->entries);
+		/* Restore the original entries */
+		memcpy(acles->entries, backup, sizeof(backup));
+	}
+
+	return ret;
+}
+
+/**
+ * ksz9477_acl_wait_ready - Waits for the ACL operation to complete on a given
+ *			    port.
+ * @dev: The ksz_device instance.
+ * @port: The port number to wait for.
+ *
+ * This function checks if the ACL write or read operation is completed by
+ * polling the specified register.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+static int ksz9477_acl_wait_ready(struct ksz_device *dev, int port)
+{
+	unsigned int wr_mask = KSZ9477_ACL_WRITE_DONE | KSZ9477_ACL_READ_DONE;
+	unsigned int val, reg;
+	int ret;
+
+	reg = dev->dev_ops->get_port_addr(port, KSZ9477_PORT_ACL_CTRL_0);
+
+	ret = regmap_read_poll_timeout(dev->regmap[0], reg, val,
+				       (val & wr_mask) == wr_mask, 1000, 10000);
+	if (ret)
+		dev_err(dev->dev, "Failed to read/write ACL table\n");
+
+	return ret;
+}
+
+/**
+ * ksz9477_acl_entry_write - Writes an ACL entry to a given port at the
+ *			     specified index.
+ * @dev: The ksz_device instance.
+ * @port: The port number to write the ACL entry to.
+ * @entry: A pointer to the ACL entry data.
+ * @idx: The index at which to write the ACL entry.
+ *
+ * This function writes the provided ACL entry to the specified port at the
+ * given index.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+static int ksz9477_acl_entry_write(struct ksz_device *dev, int port, u8 *entry,
+				   int idx)
+{
+	int ret, i;
+	u8 val;
+
+	for (i = 0; i < KSZ9477_ACL_ENTRY_SIZE; i++) {
+		ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_0 + i, entry[i]);
+		if (ret) {
+			dev_err(dev->dev, "Failed to write ACL entry %d\n", i);
+			return ret;
+		}
+	}
+
+	/* write everything down */
+	val = FIELD_PREP(KSZ9477_ACL_INDEX_M, idx) | KSZ9477_ACL_WRITE;
+	ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_CTRL_0, val);
+	if (ret)
+		return ret;
+
+	/* wait until everything is written  */
+	return ksz9477_acl_wait_ready(dev, port);
+}
+
+/**
+ * ksz9477_acl_port_enable - Enables ACL functionality on a given port.
+ * @dev: The ksz_device instance.
+ * @port: The port number on which to enable ACL functionality.
+ *
+ * This function enables ACL functionality on the specified port by configuring
+ * the appropriate control registers. It returns 0 if the operation is
+ * successful, or a negative error code if an error occurs.
+ *
+ * 0xn801 - KSZ9477S 5.2.8.2 Port Priority Control Register
+ *        Bit 7 - Highest Priority
+ *        Bit 6 - OR'ed Priority
+ *        Bit 4 - MAC Address Priority Classification
+ *        Bit 3 - VLAN Priority Classification
+ *        Bit 2 - 802.1p Priority Classification
+ *        Bit 1 - Diffserv Priority Classification
+ *        Bit 0 - ACL Priority Classification
+ *
+ * Current driver implementation sets 802.1p priority classification by default.
+ * In this function we add ACL priority classification with OR'ed priority.
+ * According to testing, priority set by ACL will supersede the 802.1p priority.
+ *
+ * 0xn803 - KSZ9477S 5.2.8.4 Port Authentication Control Register
+ *        Bit 2 - Access Control List (ACL) Enable
+ *        Bits 1:0 - Authentication Mode
+ *                00 = Reserved
+ *                01 = Block Mode. Authentication is enabled. When ACL is
+ *                     enabled, all traffic that misses the ACL rules is
+ *                     blocked; otherwise ACL actions apply.
+ *                10 = Pass Mode. Authentication is disabled. When ACL is
+ *                     enabled, all traffic that misses the ACL rules is
+ *                     forwarded; otherwise ACL actions apply.
+ *                11 = Trap Mode. Authentication is enabled. All traffic is
+ *                     forwarded to the host port. When ACL is enabled, all
+ *                     traffic that misses the ACL rules is blocked; otherwise
+ *                     ACL actions apply.
+ *
+ * We are using Pass Mode int this function.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+static int ksz9477_acl_port_enable(struct ksz_device *dev, int port)
+{
+	int ret;
+
+	ret = ksz_prmw8(dev, port, P_PRIO_CTRL, 0, PORT_ACL_PRIO_ENABLE |
+			PORT_OR_PRIO);
+	if (ret)
+		return ret;
+
+	return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL,
+			   PORT_ACL_ENABLE |
+			   FIELD_PREP(PORT_AUTHEN_MODE, PORT_AUTHEN_PASS));
+}
+
+/**
+ * ksz9477_acl_port_disable - Disables ACL functionality on a given port.
+ * @dev: The ksz_device instance.
+ * @port: The port number on which to disable ACL functionality.
+ *
+ * This function disables ACL functionality on the specified port by writing a
+ * value of 0 to the REG_PORT_MRI_AUTHEN_CTRL control register and remove
+ * PORT_ACL_PRIO_ENABLE bit from P_PRIO_CTRL register.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+static int ksz9477_acl_port_disable(struct ksz_device *dev, int port)
+{
+	int ret;
+
+	ret = ksz_prmw8(dev, port, P_PRIO_CTRL, PORT_ACL_PRIO_ENABLE, 0);
+	if (ret)
+		return ret;
+
+	return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL, 0);
+}
+
+/**
+ * ksz9477_acl_write_list - Write a list of ACL entries to a given port.
+ * @dev: The ksz_device instance.
+ * @port: The port number on which to write ACL entries.
+ *
+ * This function enables ACL functionality on the specified port, writes a list
+ * of ACL entries to the port, and disables ACL functionality if there are no
+ * entries.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+int ksz9477_acl_write_list(struct ksz_device *dev, int port)
+{
+	struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+	struct ksz9477_acl_entries *acles = &acl->acles;
+	int ret, i;
+
+	/* ACL should be enabled before writing entries */
+	ret = ksz9477_acl_port_enable(dev, port);
+	if (ret)
+		return ret;
+
+	/* write all entries */
+	for (i = 0; i < ARRAY_SIZE(acles->entries); i++) {
+		u8 *entry = acles->entries[i].entry;
+
+		/* Check if entry was removed and should be zeroed.
+		 * If last fields of the entry are not zero, it means
+		 * it is removed locally but currently not synced with the HW.
+		 * So, we will write it down to the HW to remove it.
+		 */
+		if (i >= acles->entries_count &&
+		    entry[KSZ9477_ACL_PORT_ACCESS_10] == 0 &&
+		    entry[KSZ9477_ACL_PORT_ACCESS_11] == 0)
+			continue;
+
+		ret = ksz9477_acl_entry_write(dev, port, entry, i);
+		if (ret)
+			return ret;
+
+		/* now removed entry is clean on HW side, so it can
+		 * in the cache too
+		 */
+		if (i >= acles->entries_count &&
+		    entry[KSZ9477_ACL_PORT_ACCESS_10] != 0 &&
+		    entry[KSZ9477_ACL_PORT_ACCESS_11] != 0) {
+			entry[KSZ9477_ACL_PORT_ACCESS_10] = 0;
+			entry[KSZ9477_ACL_PORT_ACCESS_11] = 0;
+		}
+	}
+
+	if (!acles->entries_count)
+		return ksz9477_acl_port_disable(dev, port);
+
+	return 0;
+}
+
+/**
+ * ksz9477_acl_remove_entries - Remove ACL entries with a given cookie from a
+ *                              specified ksz9477_acl_entries structure.
+ * @dev: The ksz_device instance.
+ * @port: The port number on which to remove ACL entries.
+ * @acles: The ksz9477_acl_entries instance.
+ * @cookie: The cookie value to match for entry removal.
+ *
+ * This function iterates through the entries array, removing any entries with
+ * a matching cookie value. The remaining entries are then shifted down to fill
+ * the gap.
+ */
+void ksz9477_acl_remove_entries(struct ksz_device *dev, int port,
+				struct ksz9477_acl_entries *acles,
+				unsigned long cookie)
+{
+	int entries_count = acles->entries_count;
+	int ret, i, src_count;
+	int src_idx = -1;
+
+	if (!entries_count)
+		return;
+
+	/* Search for the first position with the cookie */
+	for (i = 0; i < entries_count; i++) {
+		if (acles->entries[i].cookie == cookie) {
+			src_idx = i;
+			break;
+		}
+	}
+
+	/* No entries with the matching cookie found */
+	if (src_idx == -1)
+		return;
+
+	/* Get the size of the cookie entry. We may have complex entries. */
+	src_count = ksz9477_acl_get_cont_entr(dev, port, src_idx);
+	if (src_count <= 0)
+		return;
+
+	/* Move all entries down to overwrite removed entry with the cookie */
+	ret = ksz9477_move_entries_downwards(dev, acles, src_idx,
+					     src_count,
+					     entries_count - src_count);
+
+	/* Overwrite new empty places at the end of the list with zeros to make
+	 * sure not unexpected things will happen or no unexplored quirks will
+	 * come out.
+	 */
+	for (i = entries_count - src_count; i < entries_count; i++) {
+		struct ksz9477_acl_entry *entry = &acles->entries[i];
+
+		memset(entry, 0, sizeof(*entry));
+
+		/* Set all access bits to be able to write zeroed entry to HW */
+		entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff;
+		entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff;
+	}
+
+	/* Adjust the total entries count */
+	acles->entries_count -= src_count;
+}
+
+/**
+ * ksz9477_port_acl_init - Initialize the ACL for a specified port on a ksz
+ *			   device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to initialize the ACL for.
+ *
+ * This function allocates memory for an acl structure, associates it with the
+ * specified port, and initializes the ACL entries to a default state. The
+ * entries are then written using the ksz9477_acl_write_list function, ensuring
+ * the ACL has a predictable initial hardware state.
+ *
+ * Returns: 0 on success, or an error code on failure.
+ */
+int ksz9477_port_acl_init(struct ksz_device *dev, int port)
+{
+	struct ksz9477_acl_entries *acles;
+	struct ksz9477_acl_priv *acl;
+	int ret, i;
+
+	acl = kzalloc(sizeof(*acl), GFP_KERNEL);
+	if (!acl)
+		return -ENOMEM;
+
+	dev->ports[port].acl_priv = acl;
+
+	acles = &acl->acles;
+	/* write all entries */
+	for (i = 0; i < ARRAY_SIZE(acles->entries); i++) {
+		u8 *entry = acles->entries[i].entry;
+
+		/* Set all access bits to be able to write zeroed
+		 * entry
+		 */
+		entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff;
+		entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff;
+	}
+
+	ret = ksz9477_acl_write_list(dev, port);
+	if (ret)
+		goto free_acl;
+
+	return 0;
+
+free_acl:
+	kfree(dev->ports[port].acl_priv);
+	dev->ports[port].acl_priv = NULL;
+
+	return ret;
+}
+
+/**
+ * ksz9477_port_acl_free - Free the ACL resources for a specified port on a ksz
+ *			   device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to initialize the ACL for.
+ *
+ * This disables the ACL for the specified port and frees the associated memory,
+ */
+void ksz9477_port_acl_free(struct ksz_device *dev, int port)
+{
+	if (!dev->ports[port].acl_priv)
+		return;
+
+	ksz9477_acl_port_disable(dev, port);
+
+	kfree(dev->ports[port].acl_priv);
+	dev->ports[port].acl_priv = NULL;
+}
+
+/**
+ * ksz9477_acl_set_reg - Set entry[16] and entry[17] depending on the updated
+ *			   entry[]
+ * @entry: An array containing the entries
+ * @reg: The register of the entry that needs to be updated
+ * @value: The value to be assigned to the updated entry
+ *
+ * This function updates the entry[] array based on the provided register and
+ * value. It also sets entry[0x10] and entry[0x11] according to the ACL byte
+ * enable rules.
+ *
+ * 0x10 - Byte Enable [15:8]
+ *
+ * Each bit enables accessing one of the ACL bytes when a read or write is
+ * initiated by writing to the Port ACL Byte Enable LSB Register.
+ * Bit 0 applies to the Port ACL Access 7 Register
+ * Bit 1 applies to the Port ACL Access 6 Register, etc.
+ * Bit 7 applies to the Port ACL Access 0 Register
+ * 1 = Byte is selected for read/write
+ * 0 = Byte is not selected
+ *
+ * 0x11 - Byte Enable [7:0]
+ *
+ * Each bit enables accessing one of the ACL bytes when a read or write is
+ * initiated by writing to the Port ACL Byte Enable LSB Register.
+ * Bit 0 applies to the Port ACL Access F Register
+ * Bit 1 applies to the Port ACL Access E Register, etc.
+ * Bit 7 applies to the Port ACL Access 8 Register
+ * 1 = Byte is selected for read/write
+ * 0 = Byte is not selected
+ */
+static void ksz9477_acl_set_reg(u8 *entry, enum ksz9477_acl_port_access reg,
+				u8 value)
+{
+	if (reg >= KSZ9477_ACL_PORT_ACCESS_0 &&
+	    reg <= KSZ9477_ACL_PORT_ACCESS_7) {
+		entry[KSZ9477_ACL_PORT_ACCESS_10] |=
+				BIT(KSZ9477_ACL_PORT_ACCESS_7 - reg);
+	} else if (reg >= KSZ9477_ACL_PORT_ACCESS_8 &&
+		   reg <= KSZ9477_ACL_PORT_ACCESS_F) {
+		entry[KSZ9477_ACL_PORT_ACCESS_11] |=
+			BIT(KSZ9477_ACL_PORT_ACCESS_F - reg);
+	} else {
+		WARN_ON(1);
+		return;
+	}
+
+	entry[reg] = value;
+}
+
+/**
+ * ksz9477_acl_matching_rule_cfg_l2 - Configure an ACL filtering entry to match
+ *				      L2 types of Ethernet frames
+ * @entry: Pointer to ACL entry buffer
+ * @ethertype: Ethertype value
+ * @eth_addr: Pointer to Ethernet address
+ * @is_src: If true, match the source MAC address; if false, match the
+ *	    destination MAC address
+ *
+ * This function configures an Access Control List (ACL) filtering
+ * entry to match Layer 2 types of Ethernet frames based on the provided
+ * ethertype and Ethernet address. Additionally, it can match either the source
+ * or destination MAC address depending on the value of the is_src parameter.
+ *
+ * Register Descriptions for MD = 01 and ENB != 00 (Layer 2 MAC header
+ * filtering)
+ *
+ * 0x01 - Mode and Enable
+ *        Bits 5:4 - MD (Mode)
+ *                01 = Layer 2 MAC header or counter filtering
+ *        Bits 3:2 - ENB (Enable)
+ *                01 = Comparison is performed only on the TYPE value
+ *                10 = Comparison is performed only on the MAC Address value
+ *                11 = Both the MAC Address and TYPE are tested
+ *        Bit  1   - S/D (Source / Destination)
+ *                0 = Destination address
+ *                1 = Source address
+ *        Bit  0   - EQ (Equal / Not Equal)
+ *                0 = Not Equal produces true result
+ *                1 = Equal produces true result
+ *
+ * 0x02-0x07 - MAC Address
+ *        0x02 - MAC Address [47:40]
+ *        0x03 - MAC Address [39:32]
+ *        0x04 - MAC Address [31:24]
+ *        0x05 - MAC Address [23:16]
+ *        0x06 - MAC Address [15:8]
+ *        0x07 - MAC Address [7:0]
+ *
+ * 0x08-0x09 - EtherType
+ *        0x08 - EtherType [15:8]
+ *        0x09 - EtherType [7:0]
+ */
+static void ksz9477_acl_matching_rule_cfg_l2(u8 *entry, u16 ethertype,
+					     u8 *eth_addr, bool is_src)
+{
+	u8 enb = 0;
+	u8 val;
+
+	if (ethertype)
+		enb |= KSZ9477_ACL_ENB_L2_TYPE;
+	if (eth_addr)
+		enb |= KSZ9477_ACL_ENB_L2_MAC;
+
+	val = FIELD_PREP(KSZ9477_ACL_MD_MASK, KSZ9477_ACL_MD_L2_MAC) |
+	      FIELD_PREP(KSZ9477_ACL_ENB_MASK, enb) |
+	      FIELD_PREP(KSZ9477_ACL_SD_SRC, is_src) | KSZ9477_ACL_EQ_EQUAL;
+	ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_1, val);
+
+	if (eth_addr) {
+		int i;
+
+		for (i = 0; i < ETH_ALEN; i++) {
+			ksz9477_acl_set_reg(entry,
+					    KSZ9477_ACL_PORT_ACCESS_2 + i,
+					    eth_addr[i]);
+		}
+	}
+
+	ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_8, ethertype >> 8);
+	ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_9, ethertype & 0xff);
+}
+
+/**
+ * ksz9477_acl_action_rule_cfg - Set action for an ACL entry
+ * @entry: Pointer to the ACL entry
+ * @force_prio: If true, force the priority value
+ * @prio_val: Priority value
+ *
+ * This function sets the action for the specified ACL entry. It prepares
+ * the priority mode and traffic class values and updates the entry's
+ * action registers accordingly. Currently, there is no port or VLAN PCP
+ * remapping.
+ *
+ * ACL Action Rule Parameters for Non-Count Modes (MD ≠ 01 or ENB ≠ 00)
+ *
+ * 0x0A - PM, P, RPE, RP[2:1]
+ *        Bits 7:6 - PM[1:0] - Priority Mode
+ *		00 = ACL does not specify the packet priority. Priority is
+ *		     determined by standard QoS functions.
+ *		01 = Change packet priority to P[2:0] if it is greater than QoS
+ *		     result.
+ *		10 = Change packet priority to P[2:0] if it is smaller than the
+ *		     QoS result.
+ *		11 = Always change packet priority to P[2:0].
+ *        Bits 5:3 - P[2:0] - Priority value
+ *        Bit  2   - RPE - Remark Priority Enable
+ *        Bits 1:0 - RP[2:1] - Remarked Priority value (bits 2:1)
+ *		0 = Disable priority remarking
+ *		1 = Enable priority remarking. VLAN tag priority (PCP) bits are
+ *		    replaced by RP[2:0].
+ *
+ * 0x0B - RP[0], MM
+ *        Bit  7   - RP[0] - Remarked Priority value (bit 0)
+ *        Bits 6:5 - MM[1:0] - Map Mode
+ *		00 = No forwarding remapping
+ *		01 = The forwarding map in FORWARD is OR'ed with the forwarding
+ *		     map from the Address Lookup Table.
+ *		10 = The forwarding map in FORWARD is AND'ed with the forwarding
+ *		     map from the Address Lookup Table.
+ *		11 = The forwarding map in FORWARD replaces the forwarding map
+ *		     from the Address Lookup Table.
+ * 0x0D - FORWARD[n:0]
+ *       Bits 7:0 - FORWARD[n:0] - Forwarding map. Bit 0 = port 1,
+ *		    bit 1 = port 2, etc.
+ *		1 = enable forwarding to this port
+ *		0 = do not forward to this port
+ */
+void ksz9477_acl_action_rule_cfg(u8 *entry, bool force_prio, u8 prio_val)
+{
+	u8 prio_mode, val;
+
+	if (force_prio)
+		prio_mode = KSZ9477_ACL_PM_REPLACE;
+	else
+		prio_mode = KSZ9477_ACL_PM_DISABLE;
+
+	val = FIELD_PREP(KSZ9477_ACL_PM_M, prio_mode) |
+	      FIELD_PREP(KSZ9477_ACL_P_M, prio_val);
+	ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_A, val);
+
+	/* no port or VLAN PCP remapping for now */
+	ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_B, 0);
+	ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_D, 0);
+}
+
+/**
+ * ksz9477_acl_processing_rule_set_action - Set the action for the processing
+ *					    rule set.
+ * @entry: Pointer to the ACL entry
+ * @action_idx: Index of the action to be applied
+ *
+ * This function sets the action for the processing rule set by updating the
+ * appropriate register in the entry. There can be only one action per
+ * processing rule.
+ *
+ * Access Control List (ACL) Processing Rule Registers:
+ *
+ * 0x00 - First Rule Number (FRN)
+ *        Bits 3:0 - First Rule Number. Pointer to an Action rule entry.
+ */
+void ksz9477_acl_processing_rule_set_action(u8 *entry, u8 action_idx)
+{
+	ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_0, action_idx);
+}
+
+/**
+ * ksz9477_acl_processing_rule_add_match - Add a matching rule to the rule set
+ * @entry: Pointer to the ACL entry
+ * @match_idx: Index of the matching rule to be added
+ *
+ * This function adds a matching rule to the rule set by updating the
+ * appropriate bits in the entry's rule set registers.
+ *
+ * Access Control List (ACL) Processing Rule Registers:
+ *
+ * 0x0E - RuleSet [15:8]
+ *        Bits 7:0 - RuleSet [15:8] Specifies a set of one or more Matching rule
+ *        entries. RuleSet has one bit for each of the 16 Matching rule entries.
+ *        If multiple Matching rules are selected, then all conditions will be
+ *	  AND'ed to produce a final match result.
+ *		0 = Matching rule not selected
+ *		1 = Matching rule selected
+ *
+ * 0x0F - RuleSet [7:0]
+ *        Bits 7:0 - RuleSet [7:0]
+ */
+static void ksz9477_acl_processing_rule_add_match(u8 *entry, u8 match_idx)
+{
+	u8 vale = entry[KSZ9477_ACL_PORT_ACCESS_E];
+	u8 valf = entry[KSZ9477_ACL_PORT_ACCESS_F];
+
+	if (match_idx < 8)
+		valf |= BIT(match_idx);
+	else
+		vale |= BIT(match_idx - 8);
+
+	ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_E, vale);
+	ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_F, valf);
+}
+
+/**
+ * ksz9477_acl_get_init_entry - Get a new uninitialized entry for a specified
+ *				port on a ksz_device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to get the uninitialized entry for.
+ * @cookie: The cookie to associate with the entry.
+ * @prio: The priority to associate with the entry.
+ *
+ * This function retrieves the next available ACL entry for the specified port,
+ * clears all access flags, and associates it with the current cookie.
+ *
+ * Returns: A pointer to the new uninitialized ACL entry.
+ */
+static struct ksz9477_acl_entry *
+ksz9477_acl_get_init_entry(struct ksz_device *dev, int port,
+			   unsigned long cookie, u32 prio)
+{
+	struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+	struct ksz9477_acl_entries *acles = &acl->acles;
+	struct ksz9477_acl_entry *entry;
+
+	entry = &acles->entries[acles->entries_count];
+	entry->cookie = cookie;
+	entry->prio = prio;
+
+	/* clear all access flags */
+	entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0;
+	entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0;
+
+	return entry;
+}
+
+/**
+ * ksz9477_acl_match_process_l2 - Configure Layer 2 ACL matching rules and
+ *                                processing rules.
+ * @dev: Pointer to the ksz_device.
+ * @port: Port number.
+ * @ethtype: Ethernet type.
+ * @src_mac: Source MAC address.
+ * @dst_mac: Destination MAC address.
+ * @cookie: The cookie to associate with the entry.
+ * @prio: The priority of the entry.
+ *
+ * This function sets up matching and processing rules for Layer 2 ACLs.
+ * It takes into account that only one MAC per entry is supported.
+ */
+void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port,
+				  u16 ethtype, u8 *src_mac, u8 *dst_mac,
+				  unsigned long cookie, u32 prio)
+{
+	struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+	struct ksz9477_acl_entries *acles = &acl->acles;
+	struct ksz9477_acl_entry *entry;
+
+	entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio);
+
+	/* ACL supports only one MAC per entry */
+	if (src_mac && dst_mac) {
+		ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, src_mac,
+						 true);
+
+		/* Add both match entries to first processing rule */
+		ksz9477_acl_processing_rule_add_match(entry->entry,
+						      acles->entries_count);
+		acles->entries_count++;
+		ksz9477_acl_processing_rule_add_match(entry->entry,
+						      acles->entries_count);
+
+		entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio);
+		ksz9477_acl_matching_rule_cfg_l2(entry->entry, 0, dst_mac,
+						 false);
+		acles->entries_count++;
+	} else {
+		u8 *mac = src_mac ? src_mac : dst_mac;
+		bool is_src = src_mac ? true : false;
+
+		ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, mac,
+						 is_src);
+		ksz9477_acl_processing_rule_add_match(entry->entry,
+						      acles->entries_count);
+		acles->entries_count++;
+	}
+}
diff --git a/drivers/net/dsa/microchip/ksz9477_tc_flower.c b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
new file mode 100644
index 0000000000000..8b2f5be667e01
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2023 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+#include "ksz9477.h"
+#include "ksz9477_reg.h"
+#include "ksz_common.h"
+
+#define ETHER_TYPE_FULL_MASK		cpu_to_be16(~0)
+#define KSZ9477_MAX_TC			7
+
+/**
+ * ksz9477_flower_parse_key_l2 - Parse Layer 2 key from flow rule and configure
+ *                               ACL entries accordingly.
+ * @dev: Pointer to the ksz_device.
+ * @port: Port number.
+ * @extack: Pointer to the netlink_ext_ack.
+ * @rule: Pointer to the flow_rule.
+ * @cookie: The cookie to associate with the entry.
+ * @prio: The priority of the entry.
+ *
+ * This function parses the Layer 2 key from the flow rule and configures
+ * the corresponding ACL entries. It checks for unsupported offloads and
+ * available entries before proceeding with the configuration.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+static int ksz9477_flower_parse_key_l2(struct ksz_device *dev, int port,
+				       struct netlink_ext_ack *extack,
+				       struct flow_rule *rule,
+				       unsigned long cookie, u32 prio)
+{
+	struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+	struct flow_match_eth_addrs ematch;
+	struct ksz9477_acl_entries *acles;
+	int required_entries;
+	u8 *src_mac = NULL;
+	u8 *dst_mac = NULL;
+	u16 ethtype = 0;
+
+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) {
+		struct flow_match_basic match;
+
+		flow_rule_match_basic(rule, &match);
+
+		if (match.key->n_proto) {
+			if (match.mask->n_proto != ETHER_TYPE_FULL_MASK) {
+				NL_SET_ERR_MSG_MOD(extack,
+						   "ethernet type mask must be a full mask");
+				return -EINVAL;
+			}
+
+			ethtype = be16_to_cpu(match.key->n_proto);
+		}
+	}
+
+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
+		flow_rule_match_eth_addrs(rule, &ematch);
+
+		if (!is_zero_ether_addr(ematch.key->src)) {
+			if (!is_broadcast_ether_addr(ematch.mask->src))
+				goto not_full_mask_err;
+
+			src_mac = ematch.key->src;
+		}
+
+		if (!is_zero_ether_addr(ematch.key->dst)) {
+			if (!is_broadcast_ether_addr(ematch.mask->dst))
+				goto not_full_mask_err;
+
+			dst_mac = ematch.key->dst;
+		}
+	}
+
+	acles = &acl->acles;
+	/* ACL supports only one MAC per entry */
+	required_entries = src_mac && dst_mac ? 2 : 1;
+
+	/* Check if there are enough available entries */
+	if (acles->entries_count + required_entries > KSZ9477_ACL_MAX_ENTRIES) {
+		NL_SET_ERR_MSG_MOD(extack, "ACL entry limit reached");
+		return -EOPNOTSUPP;
+	}
+
+	ksz9477_acl_match_process_l2(dev, port, ethtype, src_mac, dst_mac,
+				     cookie, prio);
+
+	return 0;
+
+not_full_mask_err:
+	NL_SET_ERR_MSG_MOD(extack, "MAC address mask must be a full mask");
+	return -EOPNOTSUPP;
+}
+
+/**
+ * ksz9477_flower_parse_key - Parse flow rule keys for a specified port on a
+ *			      ksz_device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to parse the flow rule keys for.
+ * @extack: The netlink extended ACK for reporting errors.
+ * @rule: The flow_rule to parse.
+ * @cookie: The cookie to associate with the entry.
+ * @prio: The priority of the entry.
+ *
+ * This function checks if the used keys in the flow rule are supported by
+ * the device and parses the L2 keys if they match. If unsupported keys are
+ * used, an error message is set in the extended ACK.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+static int ksz9477_flower_parse_key(struct ksz_device *dev, int port,
+				    struct netlink_ext_ack *extack,
+				    struct flow_rule *rule,
+				    unsigned long cookie, u32 prio)
+{
+	struct flow_dissector *dissector = rule->match.dissector;
+	int ret;
+
+	if (dissector->used_keys &
+	    ~(BIT_ULL(FLOW_DISSECTOR_KEY_BASIC) |
+	      BIT_ULL(FLOW_DISSECTOR_KEY_ETH_ADDRS) |
+	      BIT_ULL(FLOW_DISSECTOR_KEY_CONTROL))) {
+		NL_SET_ERR_MSG_MOD(extack,
+				   "Unsupported keys used");
+		return -EOPNOTSUPP;
+	}
+
+	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC) ||
+	    flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
+		ret = ksz9477_flower_parse_key_l2(dev, port, extack, rule,
+						  cookie, prio);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ksz9477_flower_parse_action - Parse flow rule actions for a specified port
+ *				 on a ksz_device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to parse the flow rule actions for.
+ * @extack: The netlink extended ACK for reporting errors.
+ * @cls: The flow_cls_offload instance containing the flow rule.
+ * @entry_idx: The index of the ACL entry to store the action.
+ *
+ * This function checks if the actions in the flow rule are supported by
+ * the device. Currently, only actions that change priorities are supported.
+ * If unsupported actions are encountered, an error message is set in the
+ * extended ACK.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+static int ksz9477_flower_parse_action(struct ksz_device *dev, int port,
+				       struct netlink_ext_ack *extack,
+				       struct flow_cls_offload *cls,
+				       int entry_idx)
+{
+	struct flow_rule *rule = flow_cls_offload_flow_rule(cls);
+	struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+	const struct flow_action_entry *act;
+	struct ksz9477_acl_entry *entry;
+	bool prio_force = false;
+	u8 prio_val = 0;
+	int i;
+
+	if (TC_H_MIN(cls->classid)) {
+		NL_SET_ERR_MSG_MOD(extack, "hw_tc is not supported. Use: action skbedit prio");
+		return -EOPNOTSUPP;
+	}
+
+	flow_action_for_each(i, act, &rule->action) {
+		switch (act->id) {
+		case FLOW_ACTION_PRIORITY:
+			if (act->priority > KSZ9477_MAX_TC) {
+				NL_SET_ERR_MSG_MOD(extack, "Priority value is too high");
+				return -EOPNOTSUPP;
+			}
+			prio_force = true;
+			prio_val = act->priority;
+			break;
+		default:
+			NL_SET_ERR_MSG_MOD(extack, "action not supported");
+			return -EOPNOTSUPP;
+		}
+	}
+
+	/* pick entry to store action */
+	entry = &acl->acles.entries[entry_idx];
+
+	ksz9477_acl_action_rule_cfg(entry->entry, prio_force, prio_val);
+	ksz9477_acl_processing_rule_set_action(entry->entry, entry_idx);
+
+	return 0;
+}
+
+/**
+ * ksz9477_cls_flower_add - Add a flow classification rule for a specified port
+ *			    on a ksz_device.
+ * @ds: The DSA switch instance.
+ * @port: The port number to add the flow classification rule to.
+ * @cls: The flow_cls_offload instance containing the flow rule.
+ * @ingress: A flag indicating if the rule is applied on the ingress path.
+ *
+ * This function adds a flow classification rule for a specified port on a
+ * ksz_device. It checks if the ACL offloading is supported and parses the flow
+ * keys and actions. If the ACL is not supported, it returns an error. If there
+ * are unprocessed entries, it parses the action for the rule.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int ksz9477_cls_flower_add(struct dsa_switch *ds, int port,
+			   struct flow_cls_offload *cls, bool ingress)
+{
+	struct flow_rule *rule = flow_cls_offload_flow_rule(cls);
+	struct netlink_ext_ack *extack = cls->common.extack;
+	struct ksz_device *dev = ds->priv;
+	struct ksz9477_acl_priv *acl;
+	int action_entry_idx;
+	int ret;
+
+	acl = dev->ports[port].acl_priv;
+
+	if (!acl) {
+		NL_SET_ERR_MSG_MOD(extack, "ACL offloading is not supported");
+		return -EOPNOTSUPP;
+	}
+
+	/* A complex rule set can take multiple entries. Use first entry
+	 * to store the action.
+	 */
+	action_entry_idx = acl->acles.entries_count;
+
+	ret = ksz9477_flower_parse_key(dev, port, extack, rule, cls->cookie,
+				       cls->common.prio);
+	if (ret)
+		return ret;
+
+	ret = ksz9477_flower_parse_action(dev, port, extack, cls,
+					  action_entry_idx);
+	if (ret)
+		return ret;
+
+	ret = ksz9477_sort_acl_entries(dev, port);
+	if (ret)
+		return ret;
+
+	return ksz9477_acl_write_list(dev, port);
+}
+
+/**
+ * ksz9477_cls_flower_del - Remove a flow classification rule for a specified
+ *			    port on a ksz_device.
+ * @ds: The DSA switch instance.
+ * @port: The port number to remove the flow classification rule from.
+ * @cls: The flow_cls_offload instance containing the flow rule.
+ * @ingress: A flag indicating if the rule is applied on the ingress path.
+ *
+ * This function removes a flow classification rule for a specified port on a
+ * ksz_device. It checks if the ACL is initialized, and if not, returns an
+ * error. If the ACL is initialized, it removes entries with the specified
+ * cookie and rewrites the ACL list.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int ksz9477_cls_flower_del(struct dsa_switch *ds, int port,
+			   struct flow_cls_offload *cls, bool ingress)
+{
+	unsigned long cookie = cls->cookie;
+	struct ksz_device *dev = ds->priv;
+	struct ksz9477_acl_priv *acl;
+
+	acl = dev->ports[port].acl_priv;
+
+	if (!acl)
+		return -EOPNOTSUPP;
+
+	ksz9477_acl_remove_entries(dev, port, &acl->acles, cookie);
+
+	return ksz9477_acl_write_list(dev, port);
+}
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index ee77c44e99f65..c93ecb2ce546e 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -2628,6 +2628,45 @@ void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
 	ksz_update_port_member(dev, port);
 }
 
+static int ksz_port_setup(struct dsa_switch *ds, int port)
+{
+	struct ksz_device *dev = ds->priv;
+
+	switch (dev->chip_id) {
+	case KSZ8563_CHIP_ID:
+	case KSZ9477_CHIP_ID:
+	case KSZ9563_CHIP_ID:
+	case KSZ9567_CHIP_ID:
+	case KSZ9893_CHIP_ID:
+	case KSZ9896_CHIP_ID:
+	case KSZ9897_CHIP_ID:
+		/* Theoretically, the ACL is supported on all ports, but
+		 * currently we can't configure the CPU port for user space.
+		 */
+		if (dsa_is_user_port(ds, port))
+			return ksz9477_port_acl_init(dev, port);
+	}
+
+	return 0;
+}
+
+static void ksz_port_teardown(struct dsa_switch *ds, int port)
+{
+	struct ksz_device *dev = ds->priv;
+
+	switch (dev->chip_id) {
+	case KSZ8563_CHIP_ID:
+	case KSZ9477_CHIP_ID:
+	case KSZ9563_CHIP_ID:
+	case KSZ9567_CHIP_ID:
+	case KSZ9893_CHIP_ID:
+	case KSZ9896_CHIP_ID:
+	case KSZ9897_CHIP_ID:
+		if (dsa_is_user_port(ds, port))
+			ksz9477_port_acl_free(dev, port);
+	}
+}
+
 static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port,
 				     struct switchdev_brport_flags flags,
 				     struct netlink_ext_ack *extack)
@@ -3173,6 +3212,44 @@ static int ksz_switch_detect(struct ksz_device *dev)
 	return 0;
 }
 
+static int ksz_cls_flower_add(struct dsa_switch *ds, int port,
+			      struct flow_cls_offload *cls, bool ingress)
+{
+	struct ksz_device *dev = ds->priv;
+
+	switch (dev->chip_id) {
+	case KSZ8563_CHIP_ID:
+	case KSZ9477_CHIP_ID:
+	case KSZ9563_CHIP_ID:
+	case KSZ9567_CHIP_ID:
+	case KSZ9893_CHIP_ID:
+	case KSZ9896_CHIP_ID:
+	case KSZ9897_CHIP_ID:
+		return ksz9477_cls_flower_add(ds, port, cls, ingress);
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static int ksz_cls_flower_del(struct dsa_switch *ds, int port,
+			      struct flow_cls_offload *cls, bool ingress)
+{
+	struct ksz_device *dev = ds->priv;
+
+	switch (dev->chip_id) {
+	case KSZ8563_CHIP_ID:
+	case KSZ9477_CHIP_ID:
+	case KSZ9563_CHIP_ID:
+	case KSZ9567_CHIP_ID:
+	case KSZ9893_CHIP_ID:
+	case KSZ9896_CHIP_ID:
+	case KSZ9897_CHIP_ID:
+		return ksz9477_cls_flower_del(ds, port, cls, ingress);
+	}
+
+	return -EOPNOTSUPP;
+}
+
 /* Bandwidth is calculated by idle slope/transmission speed. Then the Bandwidth
  * is converted to Hex-decimal using the successive multiplication method. On
  * every step, integer part is taken and decimal part is carry forwarded.
@@ -3505,6 +3582,8 @@ static const struct dsa_switch_ops ksz_switch_ops = {
 	.port_bridge_join	= ksz_port_bridge_join,
 	.port_bridge_leave	= ksz_port_bridge_leave,
 	.port_stp_state_set	= ksz_port_stp_state_set,
+	.port_setup		= ksz_port_setup,
+	.port_teardown		= ksz_port_teardown,
 	.port_pre_bridge_flags	= ksz_port_pre_bridge_flags,
 	.port_bridge_flags	= ksz_port_bridge_flags,
 	.port_fast_age		= ksz_port_fast_age,
@@ -3527,6 +3606,8 @@ static const struct dsa_switch_ops ksz_switch_ops = {
 	.port_hwtstamp_set	= ksz_hwtstamp_set,
 	.port_txtstamp		= ksz_port_txtstamp,
 	.port_rxtstamp		= ksz_port_rxtstamp,
+	.cls_flower_add		= ksz_cls_flower_add,
+	.cls_flower_del		= ksz_cls_flower_del,
 	.port_setup_tc		= ksz_setup_tc,
 	.get_mac_eee		= ksz_get_mac_eee,
 	.set_mac_eee		= ksz_set_mac_eee,
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index ca37b5b879464..d180c8a34e275 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -117,6 +117,7 @@ struct ksz_port {
 	u32 rgmii_tx_val;
 	u32 rgmii_rx_val;
 	struct ksz_device *ksz_dev;
+	void *acl_priv;
 	struct ksz_irq pirq;
 	u8 num;
 #if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ_PTP)
