From patchwork Sat Sep 16 11:09:00 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= X-Patchwork-Id: 13388331 X-Patchwork-Delegate: kuba@kernel.org Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C8867134A6; Sat, 16 Sep 2023 11:14:00 +0000 (UTC) Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8E419CC4; Sat, 16 Sep 2023 04:13:27 -0700 (PDT) Received: by mail.gandi.net (Postfix) with ESMTPSA id 5D9AD240002; Sat, 16 Sep 2023 11:13:07 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=arinc9.com; s=gm1; t=1694862806; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=h68im17ZsTltgdDllQ9qqFghqW30sH1nXTjgiWPgu0s=; b=IeqUdIOdP7dL0pkj13xi7r0fav2LpFGMHvYeKgZRvrtBvaacK1H7M4o7C8dKW6qwvCP0YZ ZvUacH0ocJcOymCzkAmr9aekHHCHGGmd4p4uaSs/kRMhWWwiBaW5pA292yIgOp61DqDO0t TyKuwDpFxoxEmqsiNOUT0mzbXXdGnNnQ9VW/Y9QVRvb3ecfazZ0cGB5PYhamopOr3kG1zw fJGHsVySyaMn1mDhrl1x8ltUOzpBqM7QHk7n0cf5xjGap074q3tAaOF8R/KkKZCQipePUL SreJ1h+gAhCmCsIeDBeoa9qs58h/0LJqTIw8AWk7TrrMOuK2a74MUrsa46yJ3A== From: =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= To: "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley , George McCollister , Andrew Lunn , Florian Fainelli , Vladimir Oltean , Kurt Kanzenbach , Matthias Brugger , AngeloGioacchino Del Regno , Woojung Huh , UNGLinuxDriver@microchip.com, Linus Walleij , =?utf-8?q?Alvin_=C5=A0ipraga?= , =?utf-8?b?Q2zDqW1l?= =?utf-8?b?bnQgTMOpZ2Vy?= , Marcin Wojtas , "Russell King (Oracle)" , Lars Povlsen , Steen Hegelund , Daniel Machon , Radhey Shyam Pandey , =?utf-8?b?QXLEsW7DpyA=?= =?utf-8?b?w5xOQUw=?= , Daniel Golle , Landen Chao , DENG Qingfang , Sean Wang , Geert Uytterhoeven , Magnus Damm , Maxime Chevallier , Nicolas Ferre , Claudiu Beznea , Marek Vasut , Claudiu Manoil , Alexandre Belloni , John Crispin , Madalin Bucur , Ioana Ciornei , Lorenzo Bianconi , Felix Fietkau , Horatiu Vultur , Oleksij Rempel , Alexandre Torgue , Giuseppe Cavallaro , Jose Abreu , Grygorii Strashko , Sekhar Nori , Shyam Pandey Cc: Woojung Huh , Steen Hegelund , mithat.guner@xeront.com, erkin.bozoglu@xeront.com, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-renesas-soc@vger.kernel.org Subject: [PATCH net-next v2 08/10] dt-bindings: net: dsa: marvell: convert to json-schema Date: Sat, 16 Sep 2023 14:09:00 +0300 Message-Id: <20230916110902.234273-9-arinc.unal@arinc9.com> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230916110902.234273-1-arinc.unal@arinc9.com> References: <20230916110902.234273-1-arinc.unal@arinc9.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: arinc.unal@arinc9.com X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_BLOCKED, SPF_HELO_PASS,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net X-Patchwork-Delegate: kuba@kernel.org Convert the document for Marvell ethernet switches to json-schema. Signed-off-by: Arınç ÜNAL --- .../devicetree/bindings/net/dsa/marvell.txt | 109 ---------- .../devicetree/bindings/net/dsa/marvell.yaml | 204 ++++++++++++++++++ 2 files changed, 204 insertions(+), 109 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.txt create mode 100644 Documentation/devicetree/bindings/net/dsa/marvell.yaml diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt deleted file mode 100644 index 6ec0c181b6db..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ /dev/null @@ -1,109 +0,0 @@ -Marvell DSA Switch Device Tree Bindings ---------------------------------------- - -WARNING: This binding is currently unstable. Do not program it into a -FLASH never to be changed again. Once this binding is stable, this -warning will be removed. - -If you need a stable binding, use the old dsa.txt binding. - -Marvell Switches are MDIO devices. The following properties should be -placed as a child node of an mdio device. - -The properties described here are those specific to Marvell devices. -Additional required and optional properties can be found in dsa.txt. - -The compatibility string is used only to find an identification register, -which is at a different MDIO base address in different switch families. -- "marvell,mv88e6085" : Switch has base address 0x10. Use with models: - 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, - 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, - 6341, 6350, 6351, 6352 -- "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6190, 6190X, 6191, 6290, 6361, 6390, 6390X -- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: - 6220, 6250 - -Required properties: -- compatible : Should be one of "marvell,mv88e6085", - "marvell,mv88e6190" or "marvell,mv88e6250" as - indicated above -- reg : Address on the MII bus for the switch. - -Optional properties: - -- reset-gpios : Should be a gpio specifier for a reset line -- interrupts : Interrupt from the switch -- interrupt-controller : Indicates the switch is itself an interrupt - controller. This is used for the PHY interrupts. -#interrupt-cells = <2> : Controller uses two cells, number and flag -- eeprom-length : Set to the length of an EEPROM connected to the - switch. Must be set if the switch can not detect - the presence and/or size of a connected EEPROM, - otherwise optional. -- mdio : Container of PHY and devices on the switches MDIO - bus. -- mdio? : Container of PHYs and devices on the external MDIO - bus. The node must contains a compatible string of - "marvell,mv88e6xxx-mdio-external" - -Example: - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6190"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.yaml b/Documentation/devicetree/bindings/net/dsa/marvell.yaml new file mode 100644 index 000000000000..45756b8d74d9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/marvell.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Ethernet Switches + +$ref: dsa.yaml#/$defs/ethernet-ports + +maintainers: + - Andrew Lunn + - Arınç ÜNAL + +description: + Marvell ethernet switches are MDIO devices. + +properties: + compatible: + oneOf: + - description: | + Switch has base address 0x10. Use with models: + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, + 6176, 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 + const: marvell,mv88e6085 + + - description: | + Switch has base address 0x00. Use with models: + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X + const: marvell,mv88e6190 + + - description: | + Switch has base address 0x08 or 0x18. Use with models: + 6220, 6250 + const: marvell,mv88e6250 + + reg: + maxItems: 1 + + reset-gpios: + description: GPIO to be used to reset the whole device + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + interrupts: + maxItems: 1 + + eeprom-length: + description: + Set to the length of an EEPROM connected to the switch. Must be set if the + switch can not detect the presence and/or size of a connected EEPROM, + otherwise optional. + + mdio: + description: + The optional node for the MDIO bus of the switch. The bus will be + registered non-OF-based if this is not defined. + $ref: /schemas/net/mdio.yaml# + + mdio-external: + description: The externally reachable MDIO bus of the 6390 family switches + $ref: /schemas/net/mdio.yaml# + + properties: + compatible: + const: marvell,mv88e6xxx-mdio-external + + required: + - compatible + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + enum: + - marvell,mv88e6085 + - marvell,mv88e6250 + then: + properties: + mdio-external: false + + - if: + required: [ mdio ] + then: + patternProperties: + "^(ethernet-)?ports$": + patternProperties: + "^(ethernet-)?port@[0-9]+$": + $ref: /schemas/net/ethernet-controller.yaml#/$defs/phylink + +unevaluatedProperties: false + +examples: + - | + #include + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "rmii"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "swp1"; + }; + }; + }; + }; + + - | + #include + #include + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch: switch@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "rmii"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "swp1"; + phy-handle = <ðphy1>; + }; + + port@2 { + reg = <2>; + label = "swp2"; + phy-handle = <&ext_ethphy0>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&switch>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + mdio-external { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + ext_ethphy0: ethernet-phy@0 { + reg = <0>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + };