diff mbox series

staging: Revert "staging: qlge: Retire the driver"

Message ID 20231030150400.74178-1-benjamin.poirier@gmail.com (mailing list archive)
State Deferred
Delegated to: Netdev Maintainers
Headers show
Series staging: Revert "staging: qlge: Retire the driver" | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch, async

Commit Message

Benjamin Poirier Oct. 30, 2023, 3:04 p.m. UTC
This reverts commit 875be090928d19ff4ae7cbaadb54707abb3befdf.

On All Hallows' Eve, fear and cower for it is the return of the undead
driver.

There was a report [1] from a user of a QLE8142 device. They would like for
the driver to remain in the kernel. Therefore, revert the removal of the
qlge driver.

[1] https://lore.kernel.org/netdev/566c0155-4f80-43ec-be2c-2d1ad631bf25@gmail.com/

Reported by: Kira <nyakov13@gmail.com>
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
---

Notes:
    Once the removal and revert show up in the net-next tree, I plan to send a
    followup patch to move the driver to drivers/net/ as discussed earlier:
    https://lore.kernel.org/netdev/20231019074237.7ef255d7@kernel.org/

 .../networking/device_drivers/index.rst       |    1 +
 .../device_drivers/qlogic/index.rst           |   18 +
 .../networking/device_drivers/qlogic/qlge.rst |  118 +
 MAINTAINERS                                   |    9 +
 arch/parisc/configs/generic-64bit_defconfig   |    1 +
 drivers/staging/Kconfig                       |    2 +
 drivers/staging/Makefile                      |    1 +
 drivers/staging/qlge/Kconfig                  |   11 +
 drivers/staging/qlge/Makefile                 |    8 +
 drivers/staging/qlge/TODO                     |   28 +
 drivers/staging/qlge/qlge.h                   | 2293 ++++++++
 drivers/staging/qlge/qlge_dbg.c               | 1311 +++++
 drivers/staging/qlge/qlge_devlink.c           |  167 +
 drivers/staging/qlge/qlge_devlink.h           |    9 +
 drivers/staging/qlge/qlge_ethtool.c           |  746 +++
 drivers/staging/qlge/qlge_main.c              | 4845 +++++++++++++++++
 drivers/staging/qlge/qlge_mpi.c               | 1273 +++++
 17 files changed, 10841 insertions(+)
 create mode 100644 Documentation/networking/device_drivers/qlogic/index.rst
 create mode 100644 Documentation/networking/device_drivers/qlogic/qlge.rst
 create mode 100644 drivers/staging/qlge/Kconfig
 create mode 100644 drivers/staging/qlge/Makefile
 create mode 100644 drivers/staging/qlge/TODO
 create mode 100644 drivers/staging/qlge/qlge.h
 create mode 100644 drivers/staging/qlge/qlge_dbg.c
 create mode 100644 drivers/staging/qlge/qlge_devlink.c
 create mode 100644 drivers/staging/qlge/qlge_devlink.h
 create mode 100644 drivers/staging/qlge/qlge_ethtool.c
 create mode 100644 drivers/staging/qlge/qlge_main.c
 create mode 100644 drivers/staging/qlge/qlge_mpi.c

Comments

Greg KH Oct. 30, 2023, 3:25 p.m. UTC | #1
On Tue, Oct 31, 2023 at 02:04:00AM +1100, Benjamin Poirier wrote:
> This reverts commit 875be090928d19ff4ae7cbaadb54707abb3befdf.
> 
> On All Hallows' Eve, fear and cower for it is the return of the undead
> driver.
> 
> There was a report [1] from a user of a QLE8142 device. They would like for
> the driver to remain in the kernel. Therefore, revert the removal of the
> qlge driver.
> 
> [1] https://lore.kernel.org/netdev/566c0155-4f80-43ec-be2c-2d1ad631bf25@gmail.com/

Who's going to maintain this?

> Reported by: Kira <nyakov13@gmail.com>
> Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
> ---
> 
> Notes:
>     Once the removal and revert show up in the net-next tree, I plan to send a
>     followup patch to move the driver to drivers/net/ as discussed earlier:
>     https://lore.kernel.org/netdev/20231019074237.7ef255d7@kernel.org/

are you going to be willing to maintain this and keep it alive?

I'm all this, if you want to, but I would like it out of staging.  So
how about applying this, and a follow-on one that moves it there once
-rc1 is out?  And it probably should be in the 'net' tree, as you don't
want 6.7 to come out without the driver at all, right?

> +QLOGIC QLGE 10Gb ETHERNET DRIVER
> +M:	Manish Chopra <manishc@marvell.com>
> +M:	GR-Linux-NIC-Dev@marvell.com
> +M:	Coiby Xu <coiby.xu@gmail.com>
> +L:	netdev@vger.kernel.org
> +S:	Supported
> +F:	Documentation/networking/device_drivers/qlogic/qlge.rst
> +F:	drivers/staging/qlge/

It's obvious taht these people are not maintaining this code, so they
should be dropped from the MAINTAINERS file as well.

thanks,

greg k-h
Benjamin Poirier Oct. 30, 2023, 4:33 p.m. UTC | #2
On 2023-10-30 16:25 +0100, Greg Kroah-Hartman wrote:
> On Tue, Oct 31, 2023 at 02:04:00AM +1100, Benjamin Poirier wrote:
> > This reverts commit 875be090928d19ff4ae7cbaadb54707abb3befdf.
> > 
> > On All Hallows' Eve, fear and cower for it is the return of the undead
> > driver.
> > 
> > There was a report [1] from a user of a QLE8142 device. They would like for
> > the driver to remain in the kernel. Therefore, revert the removal of the
> > qlge driver.
> > 
> > [1] https://lore.kernel.org/netdev/566c0155-4f80-43ec-be2c-2d1ad631bf25@gmail.com/
> 
> Who's going to maintain this?

I was planning to update the MAINTAINERS entry to
S:	Orphan
when moving it back to drivers/net/. Would you prefer that I do that
change in a second patch right after the revert in staging? That would
certainly make things clearer.

> > Reported by: Kira <nyakov13@gmail.com>
> > Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
> > ---
> > 
> > Notes:
> >     Once the removal and revert show up in the net-next tree, I plan to send a
> >     followup patch to move the driver to drivers/net/ as discussed earlier:
> >     https://lore.kernel.org/netdev/20231019074237.7ef255d7@kernel.org/
> 
> are you going to be willing to maintain this and keep it alive?

No.

> I'm all this, if you want to, but I would like it out of staging.  So

I'd like it out of staging as well. Since nobody wants to maintain it, I
think it should be deleted. However, my understanding is that Jakub is
willing to take it back into drivers/net/ as-is given that there is at
least one user. Jakub, did I understand that correctly?

> how about applying this, and a follow-on one that moves it there once
> -rc1 is out?  And it probably should be in the 'net' tree, as you don't
> want 6.7 to come out without the driver at all, right?

Right about making sure 6.7 includes the driver. The 'net' tree is
usually for fixes hence why I would send to net-next. So the driver
would still be in staging for 6.7 (if you include the revert in your
6.7-rc1 submission) and would be back in drivers/net/ for 6.8.

> > +QLOGIC QLGE 10Gb ETHERNET DRIVER
> > +M:	Manish Chopra <manishc@marvell.com>
> > +M:	GR-Linux-NIC-Dev@marvell.com
> > +M:	Coiby Xu <coiby.xu@gmail.com>
> > +L:	netdev@vger.kernel.org
> > +S:	Supported
> > +F:	Documentation/networking/device_drivers/qlogic/qlge.rst
> > +F:	drivers/staging/qlge/
> 
> It's obvious taht these people are not maintaining this code, so they
> should be dropped from the MAINTAINERS file as well.

I agree.
Benjamin Poirier Oct. 30, 2023, 6:42 p.m. UTC | #3
On 2023-10-30 12:33 -0400, Benjamin Poirier wrote:
> On 2023-10-30 16:25 +0100, Greg Kroah-Hartman wrote:
> > On Tue, Oct 31, 2023 at 02:04:00AM +1100, Benjamin Poirier wrote:
> > > This reverts commit 875be090928d19ff4ae7cbaadb54707abb3befdf.
> > > 
> > > On All Hallows' Eve, fear and cower for it is the return of the undead
> > > driver.
> > > 
> > > There was a report [1] from a user of a QLE8142 device. They would like for
> > > the driver to remain in the kernel. Therefore, revert the removal of the
> > > qlge driver.
> > > 
> > > [1] https://lore.kernel.org/netdev/566c0155-4f80-43ec-be2c-2d1ad631bf25@gmail.com/
> > 
> > Who's going to maintain this?
> 
> I was planning to update the MAINTAINERS entry to
> S:	Orphan
> when moving it back to drivers/net/. Would you prefer that I do that
> change in a second patch right after the revert in staging? That would
> certainly make things clearer.
> 
> > > Reported by: Kira <nyakov13@gmail.com>
> > > Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
> > > ---
> > > 
> > > Notes:
> > >     Once the removal and revert show up in the net-next tree, I plan to send a
> > >     followup patch to move the driver to drivers/net/ as discussed earlier:
> > >     https://lore.kernel.org/netdev/20231019074237.7ef255d7@kernel.org/
> > 
> > are you going to be willing to maintain this and keep it alive?
> 
> No.
> 
> > I'm all this, if you want to, but I would like it out of staging.  So
> 
> I'd like it out of staging as well. Since nobody wants to maintain it, I
> think it should be deleted. However, my understanding is that Jakub is
> willing to take it back into drivers/net/ as-is given that there is at
> least one user. Jakub, did I understand that correctly?
> 
> > how about applying this, and a follow-on one that moves it there once
> > -rc1 is out?  And it probably should be in the 'net' tree, as you don't
> > want 6.7 to come out without the driver at all, right?
> 
> Right about making sure 6.7 includes the driver. The 'net' tree is
> usually for fixes hence why I would send to net-next. So the driver
> would still be in staging for 6.7 (if you include the revert in your
> 6.7-rc1 submission) and would be back in drivers/net/ for 6.8.

Rereading, I think I misunderstood your suggestion. You're suggesting
that I submit the revert through the net tree rather than the staging
tree. That sounds good. I'll do that once the removal shows up there.
Jakub Kicinski Oct. 30, 2023, 9:04 p.m. UTC | #4
On Mon, 30 Oct 2023 12:33:55 -0400 Benjamin Poirier wrote:
> > I'm all this, if you want to, but I would like it out of staging.  So  
> 
> I'd like it out of staging as well. Since nobody wants to maintain it, I
> think it should be deleted. However, my understanding is that Jakub is
> willing to take it back into drivers/net/ as-is given that there is at
> least one user. Jakub, did I understand that correctly?

Yes, of all the bad options this one seems least.. unusual.

To be clear - we can take the revert to net, and then the follow up /
move would go to net-next (after -rc1, for v6.8)? My initial thought 
was to get the move done in 6.7 as well, but I guess that'd be churn 
we don't want at this stage..
Greg KH Oct. 31, 2023, 7 a.m. UTC | #5
On Mon, Oct 30, 2023 at 12:33:55PM -0400, Benjamin Poirier wrote:
> On 2023-10-30 16:25 +0100, Greg Kroah-Hartman wrote:
> > On Tue, Oct 31, 2023 at 02:04:00AM +1100, Benjamin Poirier wrote:
> > > This reverts commit 875be090928d19ff4ae7cbaadb54707abb3befdf.
> > > 
> > > On All Hallows' Eve, fear and cower for it is the return of the undead
> > > driver.
> > > 
> > > There was a report [1] from a user of a QLE8142 device. They would like for
> > > the driver to remain in the kernel. Therefore, revert the removal of the
> > > qlge driver.
> > > 
> > > [1] https://lore.kernel.org/netdev/566c0155-4f80-43ec-be2c-2d1ad631bf25@gmail.com/
> > 
> > Who's going to maintain this?
> 
> I was planning to update the MAINTAINERS entry to
> S:	Orphan
> when moving it back to drivers/net/. Would you prefer that I do that
> change in a second patch right after the revert in staging? That would
> certainly make things clearer.

I would prefer not having orphaned code in the kernel tree.  Again, who
is going to support this?  It was dropped because there is no owner and
the company doesn't care anymore.  We can't add it back if there is no
one who will do the real-work to fix it up and get it out of staging.
Just magically moving it there isn't going to be a solution either.

> > > Reported by: Kira <nyakov13@gmail.com>
> > > Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
> > > ---
> > > 
> > > Notes:
> > >     Once the removal and revert show up in the net-next tree, I plan to send a
> > >     followup patch to move the driver to drivers/net/ as discussed earlier:
> > >     https://lore.kernel.org/netdev/20231019074237.7ef255d7@kernel.org/
> > 
> > are you going to be willing to maintain this and keep it alive?
> 
> No.
> 
> > I'm all this, if you want to, but I would like it out of staging.  So
> 
> I'd like it out of staging as well. Since nobody wants to maintain it, I
> think it should be deleted. However, my understanding is that Jakub is
> willing to take it back into drivers/net/ as-is given that there is at
> least one user. Jakub, did I understand that correctly?
> 
> > how about applying this, and a follow-on one that moves it there once
> > -rc1 is out?  And it probably should be in the 'net' tree, as you don't
> > want 6.7 to come out without the driver at all, right?
> 
> Right about making sure 6.7 includes the driver. The 'net' tree is
> usually for fixes hence why I would send to net-next. So the driver
> would still be in staging for 6.7 (if you include the revert in your
> 6.7-rc1 submission) and would be back in drivers/net/ for 6.8.

Let's wait until 6.7-rc1 is out and then, if the netdev developers want
to take this on, they can revert it and move it to drivers/net/.

But right now, my tree is frozen, it's the middle of the merge window,
let's wait 2 weeks please.

thanks,

greg k-h
Greg KH Nov. 6, 2023, 6:54 a.m. UTC | #6
On Tue, Oct 31, 2023 at 02:04:00AM +1100, Benjamin Poirier wrote:
> This reverts commit 875be090928d19ff4ae7cbaadb54707abb3befdf.
> 
> On All Hallows' Eve, fear and cower for it is the return of the undead
> driver.
> 
> There was a report [1] from a user of a QLE8142 device. They would like for
> the driver to remain in the kernel. Therefore, revert the removal of the
> qlge driver.
> 
> [1] https://lore.kernel.org/netdev/566c0155-4f80-43ec-be2c-2d1ad631bf25@gmail.com/

<snip>

> --- /dev/null
> +++ b/drivers/staging/qlge/TODO
> @@ -0,0 +1,28 @@
> +* commit 7c734359d350 ("qlge: Size RX buffers based on MTU.", v2.6.33-rc1)
> +  introduced dead code in the receive routines, which should be rewritten
> +  anyways by the admission of the author himself, see the comment above
> +  qlge_build_rx_skb(). That function is now used exclusively to handle packets
> +  that underwent header splitting but it still contains code to handle non
> +  split cases.
> +* truesize accounting is incorrect (ex: a 9000B frame has skb->truesize 10280
> +  while containing two frags of order-1 allocations, ie. >16K)
> +* while in that area, using two 8k buffers to store one 9k frame is a poor
> +  choice of buffer size.
> +* in the "chain of large buffers" case, the driver uses an skb allocated with
> +  head room but only puts data in the frags.
> +* rename "rx" queues to "completion" queues. Calling tx completion queues "rx
> +  queues" is confusing.
> +* struct rx_ring is used for rx and tx completions, with some members relevant
> +  to one case only
> +* the flow control implementation in firmware is buggy (sends a flood of pause
> +  frames, resets the link, device and driver buffer queues become
> +  desynchronized), disable it by default
> +* the driver has a habit of using runtime checks where compile time checks are
> +  possible (ex. qlge_free_rx_buffers())
> +* reorder struct members to avoid holes if it doesn't impact performance
> +* use better-suited apis (ex. use pci_iomap() instead of ioremap())
> +* remove duplicate and useless comments
> +* fix weird line wrapping (all over, ex. the qlge_set_routing_reg() calls in
> +  qlge_set_multicast_list()).
> +* remove useless casts (ex. memset((void *)mac_iocb_ptr, ...))
> +* fix checkpatch issues

In looking at this again, are you sure you all want this in the tree?
I'm glad to take the revert but ONLY if you are willing to then take a
"move this to drivers/net/" patch for the code as well, WITH an actual
maintainer and developer who is willing to do the work for this code.

In all the years that this has been in the staging tree, the listed
maintainers have not been active at all from what I can remember, and
obviously the above list of "things to fix" have not really been worked
on at all.

So why should it be added back?  I understand there is at least one
reported user, but for drivers in the staging tree, that's not a good
reason to keep them around if there is not an actual maintainer that is
willing to do the work.

Which reminds me, we should probably sweep the drivers/staging/ tree
again to see what we can remove given a lack of real development.
Normally we do that every other year or so, and this driver would fall
into the "no one is doing anything with it" category and should be
dropped.

thanks,

greg k-h
Benjamin Poirier Nov. 7, 2023, 2:15 a.m. UTC | #7
On 2023-11-06 07:54 +0100, Greg Kroah-Hartman wrote:
> On Tue, Oct 31, 2023 at 02:04:00AM +1100, Benjamin Poirier wrote:
> > This reverts commit 875be090928d19ff4ae7cbaadb54707abb3befdf.
> > 
> > On All Hallows' Eve, fear and cower for it is the return of the undead
> > driver.
> > 
> > There was a report [1] from a user of a QLE8142 device. They would like for
> > the driver to remain in the kernel. Therefore, revert the removal of the
> > qlge driver.
> > 
> > [1] https://lore.kernel.org/netdev/566c0155-4f80-43ec-be2c-2d1ad631bf25@gmail.com/
> 
> <snip>
> 
> > --- /dev/null
> > +++ b/drivers/staging/qlge/TODO
> > @@ -0,0 +1,28 @@
> > +* commit 7c734359d350 ("qlge: Size RX buffers based on MTU.", v2.6.33-rc1)
> > +  introduced dead code in the receive routines, which should be rewritten
> > +  anyways by the admission of the author himself, see the comment above
> > +  qlge_build_rx_skb(). That function is now used exclusively to handle packets
> > +  that underwent header splitting but it still contains code to handle non
> > +  split cases.
> > +* truesize accounting is incorrect (ex: a 9000B frame has skb->truesize 10280
> > +  while containing two frags of order-1 allocations, ie. >16K)
> > +* while in that area, using two 8k buffers to store one 9k frame is a poor
> > +  choice of buffer size.
> > +* in the "chain of large buffers" case, the driver uses an skb allocated with
> > +  head room but only puts data in the frags.
> > +* rename "rx" queues to "completion" queues. Calling tx completion queues "rx
> > +  queues" is confusing.
> > +* struct rx_ring is used for rx and tx completions, with some members relevant
> > +  to one case only
> > +* the flow control implementation in firmware is buggy (sends a flood of pause
> > +  frames, resets the link, device and driver buffer queues become
> > +  desynchronized), disable it by default
> > +* the driver has a habit of using runtime checks where compile time checks are
> > +  possible (ex. qlge_free_rx_buffers())
> > +* reorder struct members to avoid holes if it doesn't impact performance
> > +* use better-suited apis (ex. use pci_iomap() instead of ioremap())
> > +* remove duplicate and useless comments
> > +* fix weird line wrapping (all over, ex. the qlge_set_routing_reg() calls in
> > +  qlge_set_multicast_list()).
> > +* remove useless casts (ex. memset((void *)mac_iocb_ptr, ...))
> > +* fix checkpatch issues
> 
> In looking at this again, are you sure you all want this in the tree?
> I'm glad to take the revert but ONLY if you are willing to then take a
> "move this to drivers/net/" patch for the code as well, WITH an actual
> maintainer and developer who is willing to do the work for this code.
> 
> In all the years that this has been in the staging tree, the listed
> maintainers have not been active at all from what I can remember, and
> obviously the above list of "things to fix" have not really been worked
> on at all.
> 
> So why should it be added back?  I understand there is at least one
> reported user, but for drivers in the staging tree, that's not a good
> reason to keep them around if there is not an actual maintainer that is
> willing to do the work.
> 
> Which reminds me, we should probably sweep the drivers/staging/ tree
> again to see what we can remove given a lack of real development.
> Normally we do that every other year or so, and this driver would fall
> into the "no one is doing anything with it" category and should be
> dropped.

Thank you for revisiting this topic. I agree with you that it's better
not to add orphaned code back into the kernel. I didn't want users to be
left out in the cold by the removal of the driver, so I just created a
dkms package as a fallback:
https://github.com/gobenji/qlge-dkms

People who want to use qlge with the latest kernel can use that package.
Since the driver code is not mainline quality and there isn't much
willingness to invest in its improvement, I think it's fitting that the
code lives out of tree. Of course, if somebody takes ownership of the
code and substantially improves it, they can submit it back to netdev.
diff mbox series

Patch

diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst
index 1ab70c94e1aa..601eacaf12f3 100644
--- a/Documentation/networking/device_drivers/index.rst
+++ b/Documentation/networking/device_drivers/index.rst
@@ -16,6 +16,7 @@  Contents:
    ethernet/index
    fddi/index
    hamradio/index
+   qlogic/index
    wifi/index
    wwan/index
 
diff --git a/Documentation/networking/device_drivers/qlogic/index.rst b/Documentation/networking/device_drivers/qlogic/index.rst
new file mode 100644
index 000000000000..ad05b04286e4
--- /dev/null
+++ b/Documentation/networking/device_drivers/qlogic/index.rst
@@ -0,0 +1,18 @@ 
+.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+QLogic QLGE Device Drivers
+===============================================
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   qlge
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/networking/device_drivers/qlogic/qlge.rst b/Documentation/networking/device_drivers/qlogic/qlge.rst
new file mode 100644
index 000000000000..0b888253d152
--- /dev/null
+++ b/Documentation/networking/device_drivers/qlogic/qlge.rst
@@ -0,0 +1,118 @@ 
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================================
+QLogic QLGE 10Gb Ethernet device driver
+=======================================
+
+This driver use drgn and devlink for debugging.
+
+Dump kernel data structures in drgn
+-----------------------------------
+
+To dump kernel data structures, the following Python script can be used
+in drgn:
+
+.. code-block:: python
+
+	def align(x, a):
+	    """the alignment a should be a power of 2
+	    """
+	    mask = a - 1
+	    return (x+ mask) & ~mask
+
+	def struct_size(struct_type):
+	    struct_str = "struct {}".format(struct_type)
+	    return sizeof(Object(prog, struct_str, address=0x0))
+
+	def netdev_priv(netdevice):
+	    NETDEV_ALIGN = 32
+	    return netdevice.value_() + align(struct_size("net_device"), NETDEV_ALIGN)
+
+	name = 'xxx'
+	qlge_device = None
+	netdevices = prog['init_net'].dev_base_head.address_of_()
+	for netdevice in list_for_each_entry("struct net_device", netdevices, "dev_list"):
+	    if netdevice.name.string_().decode('ascii') == name:
+	        print(netdevice.name)
+
+	ql_adapter = Object(prog, "struct ql_adapter", address=netdev_priv(qlge_device))
+
+The struct ql_adapter will be printed in drgn as follows,
+
+    >>> ql_adapter
+    (struct ql_adapter){
+            .ricb = (struct ricb){
+                    .base_cq = (u8)0,
+                    .flags = (u8)120,
+                    .mask = (__le16)26637,
+                    .hash_cq_id = (u8 [1024]){ 172, 142, 255, 255 },
+                    .ipv6_hash_key = (__le32 [10]){},
+                    .ipv4_hash_key = (__le32 [4]){},
+            },
+            .flags = (unsigned long)0,
+            .wol = (u32)0,
+            .nic_stats = (struct nic_stats){
+                    .tx_pkts = (u64)0,
+                    .tx_bytes = (u64)0,
+                    .tx_mcast_pkts = (u64)0,
+                    .tx_bcast_pkts = (u64)0,
+                    .tx_ucast_pkts = (u64)0,
+                    .tx_ctl_pkts = (u64)0,
+                    .tx_pause_pkts = (u64)0,
+                    ...
+            },
+            .active_vlans = (unsigned long [64]){
+                    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 52780853100545, 18446744073709551615,
+                    18446619461681283072, 0, 42949673024, 2147483647,
+            },
+            .rx_ring = (struct rx_ring [17]){
+                    {
+                            .cqicb = (struct cqicb){
+                                    .msix_vect = (u8)0,
+                                    .reserved1 = (u8)0,
+                                    .reserved2 = (u8)0,
+                                    .flags = (u8)0,
+                                    .len = (__le16)0,
+                                    .rid = (__le16)0,
+                                    ...
+                            },
+                            .cq_base = (void *)0x0,
+                            .cq_base_dma = (dma_addr_t)0,
+                    }
+                    ...
+            }
+    }
+
+coredump via devlink
+--------------------
+
+
+And the coredump obtained via devlink in json format looks like,
+
+.. code:: shell
+
+	$ devlink health dump show DEVICE reporter coredump -p -j
+	{
+	    "Core Registers": {
+	        "segment": 1,
+	        "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ]
+	    },
+	    "Test Logic Regs": {
+	        "segment": 2,
+	        "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ]
+	    },
+	    "RMII Registers": {
+	        "segment": 3,
+	        "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ]
+	    },
+	    ...
+	    "Sem Registers": {
+	        "segment": 50,
+	        "values": [ 0,0,0,0 ]
+	    }
+	}
+
+When the module parameter qlge_force_coredump is set to be true, the MPI
+RISC reset before coredumping. So coredumping will much longer since
+devlink tool has to wait for 5 secs for the resetting to be
+finished.
diff --git a/MAINTAINERS b/MAINTAINERS
index ea11a810a92a..90f13281d297 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17540,6 +17540,15 @@  L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlcnic/
 
+QLOGIC QLGE 10Gb ETHERNET DRIVER
+M:	Manish Chopra <manishc@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
+M:	Coiby Xu <coiby.xu@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	Documentation/networking/device_drivers/qlogic/qlge.rst
+F:	drivers/staging/qlge/
+
 QM1D1B0004 MEDIA DRIVER
 M:	Akihiro Tsukada <tskd08@gmail.com>
 L:	linux-media@vger.kernel.org
diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig
index 19a804860ed5..f6ded7147b4d 100644
--- a/arch/parisc/configs/generic-64bit_defconfig
+++ b/arch/parisc/configs/generic-64bit_defconfig
@@ -248,6 +248,7 @@  CONFIG_UIO_AEC=m
 CONFIG_UIO_SERCOS3=m
 CONFIG_UIO_PCI_GENERIC=m
 CONFIG_STAGING=y
+CONFIG_QLGE=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 784b9f673ead..21a158dabe6c 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -72,6 +72,8 @@  source "drivers/staging/axis-fifo/Kconfig"
 
 source "drivers/staging/fieldbus/Kconfig"
 
+source "drivers/staging/qlge/Kconfig"
+
 source "drivers/staging/vme_user/Kconfig"
 
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 2ea99c7b05d9..0f6379436443 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -26,3 +26,4 @@  obj-$(CONFIG_BCM2835_VCHIQ)	+= vc04_services/
 obj-$(CONFIG_PI433)		+= pi433/
 obj-$(CONFIG_XIL_AXIS_FIFO)	+= axis-fifo/
 obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/
+obj-$(CONFIG_QLGE)		+= qlge/
diff --git a/drivers/staging/qlge/Kconfig b/drivers/staging/qlge/Kconfig
new file mode 100644
index 000000000000..6d831ed67965
--- /dev/null
+++ b/drivers/staging/qlge/Kconfig
@@ -0,0 +1,11 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+config QLGE
+	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+	depends on ETHERNET && PCI
+	select NET_DEVLINK
+	help
+	This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+	To compile this driver as a module, choose M here. The module will be
+	called qlge.
diff --git a/drivers/staging/qlge/Makefile b/drivers/staging/qlge/Makefile
new file mode 100644
index 000000000000..07c1898a512e
--- /dev/null
+++ b/drivers/staging/qlge/Makefile
@@ -0,0 +1,8 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the Qlogic 10GbE PCI Express ethernet driver
+#
+
+obj-$(CONFIG_QLGE) += qlge.o
+
+qlge-objs := qlge_main.o qlge_dbg.o qlge_mpi.o qlge_ethtool.o qlge_devlink.o
diff --git a/drivers/staging/qlge/TODO b/drivers/staging/qlge/TODO
new file mode 100644
index 000000000000..7e277407033e
--- /dev/null
+++ b/drivers/staging/qlge/TODO
@@ -0,0 +1,28 @@ 
+* commit 7c734359d350 ("qlge: Size RX buffers based on MTU.", v2.6.33-rc1)
+  introduced dead code in the receive routines, which should be rewritten
+  anyways by the admission of the author himself, see the comment above
+  qlge_build_rx_skb(). That function is now used exclusively to handle packets
+  that underwent header splitting but it still contains code to handle non
+  split cases.
+* truesize accounting is incorrect (ex: a 9000B frame has skb->truesize 10280
+  while containing two frags of order-1 allocations, ie. >16K)
+* while in that area, using two 8k buffers to store one 9k frame is a poor
+  choice of buffer size.
+* in the "chain of large buffers" case, the driver uses an skb allocated with
+  head room but only puts data in the frags.
+* rename "rx" queues to "completion" queues. Calling tx completion queues "rx
+  queues" is confusing.
+* struct rx_ring is used for rx and tx completions, with some members relevant
+  to one case only
+* the flow control implementation in firmware is buggy (sends a flood of pause
+  frames, resets the link, device and driver buffer queues become
+  desynchronized), disable it by default
+* the driver has a habit of using runtime checks where compile time checks are
+  possible (ex. qlge_free_rx_buffers())
+* reorder struct members to avoid holes if it doesn't impact performance
+* use better-suited apis (ex. use pci_iomap() instead of ioremap())
+* remove duplicate and useless comments
+* fix weird line wrapping (all over, ex. the qlge_set_routing_reg() calls in
+  qlge_set_multicast_list()).
+* remove useless casts (ex. memset((void *)mac_iocb_ptr, ...))
+* fix checkpatch issues
diff --git a/drivers/staging/qlge/qlge.h b/drivers/staging/qlge/qlge.h
new file mode 100644
index 000000000000..69c5b332fd7c
--- /dev/null
+++ b/drivers/staging/qlge/qlge.h
@@ -0,0 +1,2293 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * QLogic QLA41xx NIC HBA Driver
+ * Copyright (c)  2003-2006 QLogic Corporation
+ */
+#ifndef _QLGE_H_
+#define _QLGE_H_
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/if_vlan.h>
+
+/*
+ * General definitions...
+ */
+#define DRV_NAME	"qlge"
+#define DRV_STRING	"QLogic 10 Gigabit PCI-E Ethernet Driver "
+#define DRV_VERSION	"1.00.00.35"
+
+#define WQ_ADDR_ALIGN	0x3	/* 4 byte alignment */
+
+#define QLGE_VENDOR_ID    0x1077
+#define QLGE_DEVICE_ID_8012	0x8012
+#define QLGE_DEVICE_ID_8000	0x8000
+#define QLGE_MEZZ_SSYS_ID_068	0x0068
+#define QLGE_MEZZ_SSYS_ID_180	0x0180
+#define MAX_CPUS 8
+#define MAX_TX_RINGS MAX_CPUS
+#define MAX_RX_RINGS ((MAX_CPUS * 2) + 1)
+
+#define NUM_TX_RING_ENTRIES	256
+#define NUM_RX_RING_ENTRIES	256
+
+/* Use the same len for sbq and lbq. Note that it seems like the device might
+ * support different sizes.
+ */
+#define QLGE_BQ_SHIFT 9
+#define QLGE_BQ_LEN BIT(QLGE_BQ_SHIFT)
+#define QLGE_BQ_SIZE (QLGE_BQ_LEN * sizeof(__le64))
+
+#define DB_PAGE_SIZE 4096
+
+/* Calculate the number of (4k) pages required to
+ * contain a buffer queue of the given length.
+ */
+#define MAX_DB_PAGES_PER_BQ(x) \
+		(((x * sizeof(u64)) / DB_PAGE_SIZE) + \
+		(((x * sizeof(u64)) % DB_PAGE_SIZE) ? 1 : 0))
+
+#define RX_RING_SHADOW_SPACE	(sizeof(u64) + \
+		MAX_DB_PAGES_PER_BQ(QLGE_BQ_LEN) * sizeof(u64) + \
+		MAX_DB_PAGES_PER_BQ(QLGE_BQ_LEN) * sizeof(u64))
+#define LARGE_BUFFER_MAX_SIZE 8192
+#define LARGE_BUFFER_MIN_SIZE 2048
+
+#define MAX_CQ 128
+#define DFLT_COALESCE_WAIT 100	/* 100 usec wait for coalescing */
+#define MAX_INTER_FRAME_WAIT 10	/* 10 usec max interframe-wait for coalescing */
+#define DFLT_INTER_FRAME_WAIT (MAX_INTER_FRAME_WAIT / 2)
+#define UDELAY_COUNT 3
+#define UDELAY_DELAY 100
+
+#define TX_DESC_PER_IOCB 8
+
+#if ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2) > 0
+#define TX_DESC_PER_OAL ((MAX_SKB_FRAGS - TX_DESC_PER_IOCB) + 2)
+#else /* all other page sizes */
+#define TX_DESC_PER_OAL 0
+#endif
+
+/* Word shifting for converting 64-bit
+ * address to a series of 16-bit words.
+ * This is used for some MPI firmware
+ * mailbox commands.
+ */
+#define LSW(x)  ((u16)(x))
+#define MSW(x)  ((u16)((u32)(x) >> 16))
+#define LSD(x)  ((u32)((u64)(x)))
+#define MSD(x)  ((u32)((((u64)(x)) >> 32)))
+
+/* In some cases, the device interprets a value of 0x0000 as 65536. These
+ * cases are marked using the following macro.
+ */
+#define QLGE_FIT16(value) ((u16)(value))
+
+/* MPI test register definitions. This register
+ * is used for determining alternate NIC function's
+ * PCI->func number.
+ */
+enum {
+	MPI_TEST_FUNC_PORT_CFG = 0x1002,
+	MPI_TEST_FUNC_PRB_CTL = 0x100e,
+		MPI_TEST_FUNC_PRB_EN = 0x18a20000,
+	MPI_TEST_FUNC_RST_STS = 0x100a,
+		MPI_TEST_FUNC_RST_FRC = 0x00000003,
+	MPI_TEST_NIC_FUNC_MASK = 0x00000007,
+	MPI_TEST_NIC1_FUNCTION_ENABLE = (1 << 0),
+	MPI_TEST_NIC1_FUNCTION_MASK = 0x0000000e,
+	MPI_TEST_NIC1_FUNC_SHIFT = 1,
+	MPI_TEST_NIC2_FUNCTION_ENABLE = (1 << 4),
+	MPI_TEST_NIC2_FUNCTION_MASK = 0x000000e0,
+	MPI_TEST_NIC2_FUNC_SHIFT = 5,
+	MPI_TEST_FC1_FUNCTION_ENABLE = (1 << 8),
+	MPI_TEST_FC1_FUNCTION_MASK	= 0x00000e00,
+	MPI_TEST_FC1_FUNCTION_SHIFT = 9,
+	MPI_TEST_FC2_FUNCTION_ENABLE = (1 << 12),
+	MPI_TEST_FC2_FUNCTION_MASK = 0x0000e000,
+	MPI_TEST_FC2_FUNCTION_SHIFT = 13,
+
+	MPI_NIC_READ = 0x00000000,
+	MPI_NIC_REG_BLOCK = 0x00020000,
+	MPI_NIC_FUNCTION_SHIFT = 6,
+};
+
+/*
+ * Processor Address Register (PROC_ADDR) bit definitions.
+ */
+enum {
+	/* Misc. stuff */
+	MAILBOX_COUNT = 16,
+	MAILBOX_TIMEOUT = 5,
+
+	PROC_ADDR_RDY = (1 << 31),
+	PROC_ADDR_R = (1 << 30),
+	PROC_ADDR_ERR = (1 << 29),
+	PROC_ADDR_DA = (1 << 28),
+	PROC_ADDR_FUNC0_MBI = 0x00001180,
+	PROC_ADDR_FUNC0_MBO = (PROC_ADDR_FUNC0_MBI + MAILBOX_COUNT),
+	PROC_ADDR_FUNC0_CTL = 0x000011a1,
+	PROC_ADDR_FUNC2_MBI = 0x00001280,
+	PROC_ADDR_FUNC2_MBO = (PROC_ADDR_FUNC2_MBI + MAILBOX_COUNT),
+	PROC_ADDR_FUNC2_CTL = 0x000012a1,
+	PROC_ADDR_MPI_RISC = 0x00000000,
+	PROC_ADDR_MDE = 0x00010000,
+	PROC_ADDR_REGBLOCK = 0x00020000,
+	PROC_ADDR_RISC_REG = 0x00030000,
+};
+
+/*
+ * System Register (SYS) bit definitions.
+ */
+enum {
+	SYS_EFE = (1 << 0),
+	SYS_FAE = (1 << 1),
+	SYS_MDC = (1 << 2),
+	SYS_DST = (1 << 3),
+	SYS_DWC = (1 << 4),
+	SYS_EVW = (1 << 5),
+	SYS_OMP_DLY_MASK = 0x3f000000,
+	/*
+	 * There are no values defined as of edit #15.
+	 */
+	SYS_ODI = (1 << 14),
+};
+
+/*
+ *  Reset/Failover Register (RST_FO) bit definitions.
+ */
+enum {
+	RST_FO_TFO = (1 << 0),
+	RST_FO_RR_MASK = 0x00060000,
+	RST_FO_RR_CQ_CAM = 0x00000000,
+	RST_FO_RR_DROP = 0x00000002,
+	RST_FO_RR_DQ = 0x00000004,
+	RST_FO_RR_RCV_FUNC_CQ = 0x00000006,
+	RST_FO_FRB = (1 << 12),
+	RST_FO_MOP = (1 << 13),
+	RST_FO_REG = (1 << 14),
+	RST_FO_FR = (1 << 15),
+};
+
+/*
+ * Function Specific Control Register (FSC) bit definitions.
+ */
+enum {
+	FSC_DBRST_MASK = 0x00070000,
+	FSC_DBRST_256 = 0x00000000,
+	FSC_DBRST_512 = 0x00000001,
+	FSC_DBRST_768 = 0x00000002,
+	FSC_DBRST_1024 = 0x00000003,
+	FSC_DBL_MASK = 0x00180000,
+	FSC_DBL_DBRST = 0x00000000,
+	FSC_DBL_MAX_PLD = 0x00000008,
+	FSC_DBL_MAX_BRST = 0x00000010,
+	FSC_DBL_128_BYTES = 0x00000018,
+	FSC_EC = (1 << 5),
+	FSC_EPC_MASK = 0x00c00000,
+	FSC_EPC_INBOUND = (1 << 6),
+	FSC_EPC_OUTBOUND = (1 << 7),
+	FSC_VM_PAGESIZE_MASK = 0x07000000,
+	FSC_VM_PAGE_2K = 0x00000100,
+	FSC_VM_PAGE_4K = 0x00000200,
+	FSC_VM_PAGE_8K = 0x00000300,
+	FSC_VM_PAGE_64K = 0x00000600,
+	FSC_SH = (1 << 11),
+	FSC_DSB = (1 << 12),
+	FSC_STE = (1 << 13),
+	FSC_FE = (1 << 15),
+};
+
+/*
+ *  Host Command Status Register (CSR) bit definitions.
+ */
+enum {
+	CSR_ERR_STS_MASK = 0x0000003f,
+	/*
+	 * There are no valued defined as of edit #15.
+	 */
+	CSR_RR = (1 << 8),
+	CSR_HRI = (1 << 9),
+	CSR_RP = (1 << 10),
+	CSR_CMD_PARM_SHIFT = 22,
+	CSR_CMD_NOP = 0x00000000,
+	CSR_CMD_SET_RST = 0x10000000,
+	CSR_CMD_CLR_RST = 0x20000000,
+	CSR_CMD_SET_PAUSE = 0x30000000,
+	CSR_CMD_CLR_PAUSE = 0x40000000,
+	CSR_CMD_SET_H2R_INT = 0x50000000,
+	CSR_CMD_CLR_H2R_INT = 0x60000000,
+	CSR_CMD_PAR_EN = 0x70000000,
+	CSR_CMD_SET_BAD_PAR = 0x80000000,
+	CSR_CMD_CLR_BAD_PAR = 0x90000000,
+	CSR_CMD_CLR_R2PCI_INT = 0xa0000000,
+};
+
+/*
+ *  Configuration Register (CFG) bit definitions.
+ */
+enum {
+	CFG_LRQ = (1 << 0),
+	CFG_DRQ = (1 << 1),
+	CFG_LR = (1 << 2),
+	CFG_DR = (1 << 3),
+	CFG_LE = (1 << 5),
+	CFG_LCQ = (1 << 6),
+	CFG_DCQ = (1 << 7),
+	CFG_Q_SHIFT = 8,
+	CFG_Q_MASK = 0x7f000000,
+};
+
+/*
+ *  Status Register (STS) bit definitions.
+ */
+enum {
+	STS_FE = (1 << 0),
+	STS_PI = (1 << 1),
+	STS_PL0 = (1 << 2),
+	STS_PL1 = (1 << 3),
+	STS_PI0 = (1 << 4),
+	STS_PI1 = (1 << 5),
+	STS_FUNC_ID_MASK = 0x000000c0,
+	STS_FUNC_ID_SHIFT = 6,
+	STS_F0E = (1 << 8),
+	STS_F1E = (1 << 9),
+	STS_F2E = (1 << 10),
+	STS_F3E = (1 << 11),
+	STS_NFE = (1 << 12),
+};
+
+/*
+ * Interrupt Enable Register (INTR_EN) bit definitions.
+ */
+enum {
+	INTR_EN_INTR_MASK = 0x007f0000,
+	INTR_EN_TYPE_MASK = 0x03000000,
+	INTR_EN_TYPE_ENABLE = 0x00000100,
+	INTR_EN_TYPE_DISABLE = 0x00000200,
+	INTR_EN_TYPE_READ = 0x00000300,
+	INTR_EN_IHD = (1 << 13),
+	INTR_EN_IHD_MASK = (INTR_EN_IHD << 16),
+	INTR_EN_EI = (1 << 14),
+	INTR_EN_EN = (1 << 15),
+};
+
+/*
+ * Interrupt Mask Register (INTR_MASK) bit definitions.
+ */
+enum {
+	INTR_MASK_PI = (1 << 0),
+	INTR_MASK_HL0 = (1 << 1),
+	INTR_MASK_LH0 = (1 << 2),
+	INTR_MASK_HL1 = (1 << 3),
+	INTR_MASK_LH1 = (1 << 4),
+	INTR_MASK_SE = (1 << 5),
+	INTR_MASK_LSC = (1 << 6),
+	INTR_MASK_MC = (1 << 7),
+	INTR_MASK_LINK_IRQS = INTR_MASK_LSC | INTR_MASK_SE | INTR_MASK_MC,
+};
+
+/*
+ *  Register (REV_ID) bit definitions.
+ */
+enum {
+	REV_ID_MASK = 0x0000000f,
+	REV_ID_NICROLL_SHIFT = 0,
+	REV_ID_NICREV_SHIFT = 4,
+	REV_ID_XGROLL_SHIFT = 8,
+	REV_ID_XGREV_SHIFT = 12,
+	REV_ID_CHIPREV_SHIFT = 28,
+};
+
+/*
+ *  Force ECC Error Register (FRC_ECC_ERR) bit definitions.
+ */
+enum {
+	FRC_ECC_ERR_VW = (1 << 12),
+	FRC_ECC_ERR_VB = (1 << 13),
+	FRC_ECC_ERR_NI = (1 << 14),
+	FRC_ECC_ERR_NO = (1 << 15),
+	FRC_ECC_PFE_SHIFT = 16,
+	FRC_ECC_ERR_DO = (1 << 18),
+	FRC_ECC_P14 = (1 << 19),
+};
+
+/*
+ *  Error Status Register (ERR_STS) bit definitions.
+ */
+enum {
+	ERR_STS_NOF = (1 << 0),
+	ERR_STS_NIF = (1 << 1),
+	ERR_STS_DRP = (1 << 2),
+	ERR_STS_XGP = (1 << 3),
+	ERR_STS_FOU = (1 << 4),
+	ERR_STS_FOC = (1 << 5),
+	ERR_STS_FOF = (1 << 6),
+	ERR_STS_FIU = (1 << 7),
+	ERR_STS_FIC = (1 << 8),
+	ERR_STS_FIF = (1 << 9),
+	ERR_STS_MOF = (1 << 10),
+	ERR_STS_TA = (1 << 11),
+	ERR_STS_MA = (1 << 12),
+	ERR_STS_MPE = (1 << 13),
+	ERR_STS_SCE = (1 << 14),
+	ERR_STS_STE = (1 << 15),
+	ERR_STS_FOW = (1 << 16),
+	ERR_STS_UE = (1 << 17),
+	ERR_STS_MCH = (1 << 26),
+	ERR_STS_LOC_SHIFT = 27,
+};
+
+/*
+ *  RAM Debug Address Register (RAM_DBG_ADDR) bit definitions.
+ */
+enum {
+	RAM_DBG_ADDR_FW = (1 << 30),
+	RAM_DBG_ADDR_FR = (1 << 31),
+};
+
+/*
+ * Semaphore Register (SEM) bit definitions.
+ */
+enum {
+	/*
+	 * Example:
+	 * reg = SEM_XGMAC0_MASK | (SEM_SET << SEM_XGMAC0_SHIFT)
+	 */
+	SEM_CLEAR = 0,
+	SEM_SET = 1,
+	SEM_FORCE = 3,
+	SEM_XGMAC0_SHIFT = 0,
+	SEM_XGMAC1_SHIFT = 2,
+	SEM_ICB_SHIFT = 4,
+	SEM_MAC_ADDR_SHIFT = 6,
+	SEM_FLASH_SHIFT = 8,
+	SEM_PROBE_SHIFT = 10,
+	SEM_RT_IDX_SHIFT = 12,
+	SEM_PROC_REG_SHIFT = 14,
+	SEM_XGMAC0_MASK = 0x00030000,
+	SEM_XGMAC1_MASK = 0x000c0000,
+	SEM_ICB_MASK = 0x00300000,
+	SEM_MAC_ADDR_MASK = 0x00c00000,
+	SEM_FLASH_MASK = 0x03000000,
+	SEM_PROBE_MASK = 0x0c000000,
+	SEM_RT_IDX_MASK = 0x30000000,
+	SEM_PROC_REG_MASK = 0xc0000000,
+};
+
+/*
+ *  10G MAC Address  Register (XGMAC_ADDR) bit definitions.
+ */
+enum {
+	XGMAC_ADDR_RDY = (1 << 31),
+	XGMAC_ADDR_R = (1 << 30),
+	XGMAC_ADDR_XME = (1 << 29),
+
+	/* XGMAC control registers */
+	PAUSE_SRC_LO = 0x00000100,
+	PAUSE_SRC_HI = 0x00000104,
+	GLOBAL_CFG = 0x00000108,
+	GLOBAL_CFG_RESET = (1 << 0),
+	GLOBAL_CFG_JUMBO = (1 << 6),
+	GLOBAL_CFG_TX_STAT_EN = (1 << 10),
+	GLOBAL_CFG_RX_STAT_EN = (1 << 11),
+	TX_CFG = 0x0000010c,
+	TX_CFG_RESET = (1 << 0),
+	TX_CFG_EN = (1 << 1),
+	TX_CFG_PREAM = (1 << 2),
+	RX_CFG = 0x00000110,
+	RX_CFG_RESET = (1 << 0),
+	RX_CFG_EN = (1 << 1),
+	RX_CFG_PREAM = (1 << 2),
+	FLOW_CTL = 0x0000011c,
+	PAUSE_OPCODE = 0x00000120,
+	PAUSE_TIMER = 0x00000124,
+	PAUSE_FRM_DEST_LO = 0x00000128,
+	PAUSE_FRM_DEST_HI = 0x0000012c,
+	MAC_TX_PARAMS = 0x00000134,
+	MAC_TX_PARAMS_JUMBO = (1 << 31),
+	MAC_TX_PARAMS_SIZE_SHIFT = 16,
+	MAC_RX_PARAMS = 0x00000138,
+	MAC_SYS_INT = 0x00000144,
+	MAC_SYS_INT_MASK = 0x00000148,
+	MAC_MGMT_INT = 0x0000014c,
+	MAC_MGMT_IN_MASK = 0x00000150,
+	EXT_ARB_MODE = 0x000001fc,
+
+	/* XGMAC TX statistics  registers */
+	TX_PKTS = 0x00000200,
+	TX_BYTES = 0x00000208,
+	TX_MCAST_PKTS = 0x00000210,
+	TX_BCAST_PKTS = 0x00000218,
+	TX_UCAST_PKTS = 0x00000220,
+	TX_CTL_PKTS = 0x00000228,
+	TX_PAUSE_PKTS = 0x00000230,
+	TX_64_PKT = 0x00000238,
+	TX_65_TO_127_PKT = 0x00000240,
+	TX_128_TO_255_PKT = 0x00000248,
+	TX_256_511_PKT = 0x00000250,
+	TX_512_TO_1023_PKT = 0x00000258,
+	TX_1024_TO_1518_PKT = 0x00000260,
+	TX_1519_TO_MAX_PKT = 0x00000268,
+	TX_UNDERSIZE_PKT = 0x00000270,
+	TX_OVERSIZE_PKT = 0x00000278,
+
+	/* XGMAC statistics control registers */
+	RX_HALF_FULL_DET = 0x000002a0,
+	TX_HALF_FULL_DET = 0x000002a4,
+	RX_OVERFLOW_DET = 0x000002a8,
+	TX_OVERFLOW_DET = 0x000002ac,
+	RX_HALF_FULL_MASK = 0x000002b0,
+	TX_HALF_FULL_MASK = 0x000002b4,
+	RX_OVERFLOW_MASK = 0x000002b8,
+	TX_OVERFLOW_MASK = 0x000002bc,
+	STAT_CNT_CTL = 0x000002c0,
+	STAT_CNT_CTL_CLEAR_TX = (1 << 0),
+	STAT_CNT_CTL_CLEAR_RX = (1 << 1),
+	AUX_RX_HALF_FULL_DET = 0x000002d0,
+	AUX_TX_HALF_FULL_DET = 0x000002d4,
+	AUX_RX_OVERFLOW_DET = 0x000002d8,
+	AUX_TX_OVERFLOW_DET = 0x000002dc,
+	AUX_RX_HALF_FULL_MASK = 0x000002f0,
+	AUX_TX_HALF_FULL_MASK = 0x000002f4,
+	AUX_RX_OVERFLOW_MASK = 0x000002f8,
+	AUX_TX_OVERFLOW_MASK = 0x000002fc,
+
+	/* XGMAC RX statistics  registers */
+	RX_BYTES = 0x00000300,
+	RX_BYTES_OK = 0x00000308,
+	RX_PKTS = 0x00000310,
+	RX_PKTS_OK = 0x00000318,
+	RX_BCAST_PKTS = 0x00000320,
+	RX_MCAST_PKTS = 0x00000328,
+	RX_UCAST_PKTS = 0x00000330,
+	RX_UNDERSIZE_PKTS = 0x00000338,
+	RX_OVERSIZE_PKTS = 0x00000340,
+	RX_JABBER_PKTS = 0x00000348,
+	RX_UNDERSIZE_FCERR_PKTS = 0x00000350,
+	RX_DROP_EVENTS = 0x00000358,
+	RX_FCERR_PKTS = 0x00000360,
+	RX_ALIGN_ERR = 0x00000368,
+	RX_SYMBOL_ERR = 0x00000370,
+	RX_MAC_ERR = 0x00000378,
+	RX_CTL_PKTS = 0x00000380,
+	RX_PAUSE_PKTS = 0x00000388,
+	RX_64_PKTS = 0x00000390,
+	RX_65_TO_127_PKTS = 0x00000398,
+	RX_128_255_PKTS = 0x000003a0,
+	RX_256_511_PKTS = 0x000003a8,
+	RX_512_TO_1023_PKTS = 0x000003b0,
+	RX_1024_TO_1518_PKTS = 0x000003b8,
+	RX_1519_TO_MAX_PKTS = 0x000003c0,
+	RX_LEN_ERR_PKTS = 0x000003c8,
+
+	/* XGMAC MDIO control registers */
+	MDIO_TX_DATA = 0x00000400,
+	MDIO_RX_DATA = 0x00000410,
+	MDIO_CMD = 0x00000420,
+	MDIO_PHY_ADDR = 0x00000430,
+	MDIO_PORT = 0x00000440,
+	MDIO_STATUS = 0x00000450,
+
+	XGMAC_REGISTER_END = 0x00000740,
+};
+
+/*
+ *  Enhanced Transmission Schedule Registers (NIC_ETS,CNA_ETS) bit definitions.
+ */
+enum {
+	ETS_QUEUE_SHIFT = 29,
+	ETS_REF = (1 << 26),
+	ETS_RS = (1 << 27),
+	ETS_P = (1 << 28),
+	ETS_FC_COS_SHIFT = 23,
+};
+
+/*
+ *  Flash Address Register (FLASH_ADDR) bit definitions.
+ */
+enum {
+	FLASH_ADDR_RDY = (1 << 31),
+	FLASH_ADDR_R = (1 << 30),
+	FLASH_ADDR_ERR = (1 << 29),
+};
+
+/*
+ *  Stop CQ Processing Register (CQ_STOP) bit definitions.
+ */
+enum {
+	CQ_STOP_QUEUE_MASK = (0x007f0000),
+	CQ_STOP_TYPE_MASK = (0x03000000),
+	CQ_STOP_TYPE_START = 0x00000100,
+	CQ_STOP_TYPE_STOP = 0x00000200,
+	CQ_STOP_TYPE_READ = 0x00000300,
+	CQ_STOP_EN = (1 << 15),
+};
+
+/*
+ *  MAC Protocol Address Index Register (MAC_ADDR_IDX) bit definitions.
+ */
+enum {
+	MAC_ADDR_IDX_SHIFT = 4,
+	MAC_ADDR_TYPE_SHIFT = 16,
+	MAC_ADDR_TYPE_COUNT = 10,
+	MAC_ADDR_TYPE_MASK = 0x000f0000,
+	MAC_ADDR_TYPE_CAM_MAC = 0x00000000,
+	MAC_ADDR_TYPE_MULTI_MAC = 0x00010000,
+	MAC_ADDR_TYPE_VLAN = 0x00020000,
+	MAC_ADDR_TYPE_MULTI_FLTR = 0x00030000,
+	MAC_ADDR_TYPE_FC_MAC = 0x00040000,
+	MAC_ADDR_TYPE_MGMT_MAC = 0x00050000,
+	MAC_ADDR_TYPE_MGMT_VLAN = 0x00060000,
+	MAC_ADDR_TYPE_MGMT_V4 = 0x00070000,
+	MAC_ADDR_TYPE_MGMT_V6 = 0x00080000,
+	MAC_ADDR_TYPE_MGMT_TU_DP = 0x00090000,
+	MAC_ADDR_ADR = (1 << 25),
+	MAC_ADDR_RS = (1 << 26),
+	MAC_ADDR_E = (1 << 27),
+	MAC_ADDR_MR = (1 << 30),
+	MAC_ADDR_MW = (1 << 31),
+	MAX_MULTICAST_ENTRIES = 32,
+
+	/* Entry count and words per entry
+	 * for each address type in the filter.
+	 */
+	MAC_ADDR_MAX_CAM_ENTRIES = 512,
+	MAC_ADDR_MAX_CAM_WCOUNT = 3,
+	MAC_ADDR_MAX_MULTICAST_ENTRIES = 32,
+	MAC_ADDR_MAX_MULTICAST_WCOUNT = 2,
+	MAC_ADDR_MAX_VLAN_ENTRIES = 4096,
+	MAC_ADDR_MAX_VLAN_WCOUNT = 1,
+	MAC_ADDR_MAX_MCAST_FLTR_ENTRIES = 4096,
+	MAC_ADDR_MAX_MCAST_FLTR_WCOUNT = 1,
+	MAC_ADDR_MAX_FC_MAC_ENTRIES = 4,
+	MAC_ADDR_MAX_FC_MAC_WCOUNT = 2,
+	MAC_ADDR_MAX_MGMT_MAC_ENTRIES = 8,
+	MAC_ADDR_MAX_MGMT_MAC_WCOUNT = 2,
+	MAC_ADDR_MAX_MGMT_VLAN_ENTRIES = 16,
+	MAC_ADDR_MAX_MGMT_VLAN_WCOUNT = 1,
+	MAC_ADDR_MAX_MGMT_V4_ENTRIES = 4,
+	MAC_ADDR_MAX_MGMT_V4_WCOUNT = 1,
+	MAC_ADDR_MAX_MGMT_V6_ENTRIES = 4,
+	MAC_ADDR_MAX_MGMT_V6_WCOUNT = 4,
+	MAC_ADDR_MAX_MGMT_TU_DP_ENTRIES = 4,
+	MAC_ADDR_MAX_MGMT_TU_DP_WCOUNT = 1,
+};
+
+/*
+ *  MAC Protocol Address Index Register (SPLT_HDR) bit definitions.
+ */
+enum {
+	SPLT_HDR_EP = (1 << 31),
+};
+
+/*
+ *  FCoE Receive Configuration Register (FC_RCV_CFG) bit definitions.
+ */
+enum {
+	FC_RCV_CFG_ECT = (1 << 15),
+	FC_RCV_CFG_DFH = (1 << 20),
+	FC_RCV_CFG_DVF = (1 << 21),
+	FC_RCV_CFG_RCE = (1 << 27),
+	FC_RCV_CFG_RFE = (1 << 28),
+	FC_RCV_CFG_TEE = (1 << 29),
+	FC_RCV_CFG_TCE = (1 << 30),
+	FC_RCV_CFG_TFE = (1 << 31),
+};
+
+/*
+ *  NIC Receive Configuration Register (NIC_RCV_CFG) bit definitions.
+ */
+enum {
+	NIC_RCV_CFG_PPE = (1 << 0),
+	NIC_RCV_CFG_VLAN_MASK = 0x00060000,
+	NIC_RCV_CFG_VLAN_ALL = 0x00000000,
+	NIC_RCV_CFG_VLAN_MATCH_ONLY = 0x00000002,
+	NIC_RCV_CFG_VLAN_MATCH_AND_NON = 0x00000004,
+	NIC_RCV_CFG_VLAN_NONE_AND_NON = 0x00000006,
+	NIC_RCV_CFG_RV = (1 << 3),
+	NIC_RCV_CFG_DFQ_MASK = (0x7f000000),
+	NIC_RCV_CFG_DFQ_SHIFT = 8,
+	NIC_RCV_CFG_DFQ = 0,	/* HARDCODE default queue to 0. */
+};
+
+/*
+ *   Mgmt Receive Configuration Register (MGMT_RCV_CFG) bit definitions.
+ */
+enum {
+	MGMT_RCV_CFG_ARP = (1 << 0),
+	MGMT_RCV_CFG_DHC = (1 << 1),
+	MGMT_RCV_CFG_DHS = (1 << 2),
+	MGMT_RCV_CFG_NP = (1 << 3),
+	MGMT_RCV_CFG_I6N = (1 << 4),
+	MGMT_RCV_CFG_I6R = (1 << 5),
+	MGMT_RCV_CFG_DH6 = (1 << 6),
+	MGMT_RCV_CFG_UD1 = (1 << 7),
+	MGMT_RCV_CFG_UD0 = (1 << 8),
+	MGMT_RCV_CFG_BCT = (1 << 9),
+	MGMT_RCV_CFG_MCT = (1 << 10),
+	MGMT_RCV_CFG_DM = (1 << 11),
+	MGMT_RCV_CFG_RM = (1 << 12),
+	MGMT_RCV_CFG_STL = (1 << 13),
+	MGMT_RCV_CFG_VLAN_MASK = 0xc0000000,
+	MGMT_RCV_CFG_VLAN_ALL = 0x00000000,
+	MGMT_RCV_CFG_VLAN_MATCH_ONLY = 0x00004000,
+	MGMT_RCV_CFG_VLAN_MATCH_AND_NON = 0x00008000,
+	MGMT_RCV_CFG_VLAN_NONE_AND_NON = 0x0000c000,
+};
+
+/*
+ *  Routing Index Register (RT_IDX) bit definitions.
+ */
+enum {
+	RT_IDX_IDX_SHIFT = 8,
+	RT_IDX_TYPE_MASK = 0x000f0000,
+	RT_IDX_TYPE_SHIFT = 16,
+	RT_IDX_TYPE_RT = 0x00000000,
+	RT_IDX_TYPE_RT_INV = 0x00010000,
+	RT_IDX_TYPE_NICQ = 0x00020000,
+	RT_IDX_TYPE_NICQ_INV = 0x00030000,
+	RT_IDX_DST_MASK = 0x00700000,
+	RT_IDX_DST_RSS = 0x00000000,
+	RT_IDX_DST_CAM_Q = 0x00100000,
+	RT_IDX_DST_COS_Q = 0x00200000,
+	RT_IDX_DST_DFLT_Q = 0x00300000,
+	RT_IDX_DST_DEST_Q = 0x00400000,
+	RT_IDX_RS = (1 << 26),
+	RT_IDX_E = (1 << 27),
+	RT_IDX_MR = (1 << 30),
+	RT_IDX_MW = (1 << 31),
+
+	/* Nic Queue format - type 2 bits */
+	RT_IDX_BCAST = (1 << 0),
+	RT_IDX_MCAST = (1 << 1),
+	RT_IDX_MCAST_MATCH = (1 << 2),
+	RT_IDX_MCAST_REG_MATCH = (1 << 3),
+	RT_IDX_MCAST_HASH_MATCH = (1 << 4),
+	RT_IDX_FC_MACH = (1 << 5),
+	RT_IDX_ETH_FCOE = (1 << 6),
+	RT_IDX_CAM_HIT = (1 << 7),
+	RT_IDX_CAM_BIT0 = (1 << 8),
+	RT_IDX_CAM_BIT1 = (1 << 9),
+	RT_IDX_VLAN_TAG = (1 << 10),
+	RT_IDX_VLAN_MATCH = (1 << 11),
+	RT_IDX_VLAN_FILTER = (1 << 12),
+	RT_IDX_ETH_SKIP1 = (1 << 13),
+	RT_IDX_ETH_SKIP2 = (1 << 14),
+	RT_IDX_BCAST_MCAST_MATCH = (1 << 15),
+	RT_IDX_802_3 = (1 << 16),
+	RT_IDX_LLDP = (1 << 17),
+	RT_IDX_UNUSED018 = (1 << 18),
+	RT_IDX_UNUSED019 = (1 << 19),
+	RT_IDX_UNUSED20 = (1 << 20),
+	RT_IDX_UNUSED21 = (1 << 21),
+	RT_IDX_ERR = (1 << 22),
+	RT_IDX_VALID = (1 << 23),
+	RT_IDX_TU_CSUM_ERR = (1 << 24),
+	RT_IDX_IP_CSUM_ERR = (1 << 25),
+	RT_IDX_MAC_ERR = (1 << 26),
+	RT_IDX_RSS_TCP6 = (1 << 27),
+	RT_IDX_RSS_TCP4 = (1 << 28),
+	RT_IDX_RSS_IPV6 = (1 << 29),
+	RT_IDX_RSS_IPV4 = (1 << 30),
+	RT_IDX_RSS_MATCH = (1 << 31),
+
+	/* Hierarchy for the NIC Queue Mask */
+	RT_IDX_ALL_ERR_SLOT = 0,
+	RT_IDX_MAC_ERR_SLOT = 0,
+	RT_IDX_IP_CSUM_ERR_SLOT = 1,
+	RT_IDX_TCP_UDP_CSUM_ERR_SLOT = 2,
+	RT_IDX_BCAST_SLOT = 3,
+	RT_IDX_MCAST_MATCH_SLOT = 4,
+	RT_IDX_ALLMULTI_SLOT = 5,
+	RT_IDX_UNUSED6_SLOT = 6,
+	RT_IDX_UNUSED7_SLOT = 7,
+	RT_IDX_RSS_MATCH_SLOT = 8,
+	RT_IDX_RSS_IPV4_SLOT = 8,
+	RT_IDX_RSS_IPV6_SLOT = 9,
+	RT_IDX_RSS_TCP4_SLOT = 10,
+	RT_IDX_RSS_TCP6_SLOT = 11,
+	RT_IDX_CAM_HIT_SLOT = 12,
+	RT_IDX_UNUSED013 = 13,
+	RT_IDX_UNUSED014 = 14,
+	RT_IDX_PROMISCUOUS_SLOT = 15,
+	RT_IDX_MAX_RT_SLOTS = 8,
+	RT_IDX_MAX_NIC_SLOTS = 16,
+};
+
+/*
+ * Serdes Address Register (XG_SERDES_ADDR) bit definitions.
+ */
+enum {
+	XG_SERDES_ADDR_RDY = (1 << 31),
+	XG_SERDES_ADDR_R = (1 << 30),
+
+	XG_SERDES_ADDR_STS = 0x00001E06,
+	XG_SERDES_ADDR_XFI1_PWR_UP = 0x00000005,
+	XG_SERDES_ADDR_XFI2_PWR_UP = 0x0000000a,
+	XG_SERDES_ADDR_XAUI_PWR_DOWN = 0x00000001,
+
+	/* Serdes coredump definitions. */
+	XG_SERDES_XAUI_AN_START = 0x00000000,
+	XG_SERDES_XAUI_AN_END = 0x00000034,
+	XG_SERDES_XAUI_HSS_PCS_START = 0x00000800,
+	XG_SERDES_XAUI_HSS_PCS_END = 0x0000880,
+	XG_SERDES_XFI_AN_START = 0x00001000,
+	XG_SERDES_XFI_AN_END = 0x00001034,
+	XG_SERDES_XFI_TRAIN_START = 0x10001050,
+	XG_SERDES_XFI_TRAIN_END = 0x1000107C,
+	XG_SERDES_XFI_HSS_PCS_START = 0x00001800,
+	XG_SERDES_XFI_HSS_PCS_END = 0x00001838,
+	XG_SERDES_XFI_HSS_TX_START = 0x00001c00,
+	XG_SERDES_XFI_HSS_TX_END = 0x00001c1f,
+	XG_SERDES_XFI_HSS_RX_START = 0x00001c40,
+	XG_SERDES_XFI_HSS_RX_END = 0x00001c5f,
+	XG_SERDES_XFI_HSS_PLL_START = 0x00001e00,
+	XG_SERDES_XFI_HSS_PLL_END = 0x00001e1f,
+};
+
+/*
+ *  NIC Probe Mux Address Register (PRB_MX_ADDR) bit definitions.
+ */
+enum {
+	PRB_MX_ADDR_ARE = (1 << 16),
+	PRB_MX_ADDR_UP = (1 << 15),
+	PRB_MX_ADDR_SWP = (1 << 14),
+
+	/* Module select values. */
+	PRB_MX_ADDR_MAX_MODS = 21,
+	PRB_MX_ADDR_MOD_SEL_SHIFT = 9,
+	PRB_MX_ADDR_MOD_SEL_TBD = 0,
+	PRB_MX_ADDR_MOD_SEL_IDE1 = 1,
+	PRB_MX_ADDR_MOD_SEL_IDE2 = 2,
+	PRB_MX_ADDR_MOD_SEL_FRB = 3,
+	PRB_MX_ADDR_MOD_SEL_ODE1 = 4,
+	PRB_MX_ADDR_MOD_SEL_ODE2 = 5,
+	PRB_MX_ADDR_MOD_SEL_DA1 = 6,
+	PRB_MX_ADDR_MOD_SEL_DA2 = 7,
+	PRB_MX_ADDR_MOD_SEL_IMP1 = 8,
+	PRB_MX_ADDR_MOD_SEL_IMP2 = 9,
+	PRB_MX_ADDR_MOD_SEL_OMP1 = 10,
+	PRB_MX_ADDR_MOD_SEL_OMP2 = 11,
+	PRB_MX_ADDR_MOD_SEL_ORS1 = 12,
+	PRB_MX_ADDR_MOD_SEL_ORS2 = 13,
+	PRB_MX_ADDR_MOD_SEL_REG = 14,
+	PRB_MX_ADDR_MOD_SEL_MAC1 = 16,
+	PRB_MX_ADDR_MOD_SEL_MAC2 = 17,
+	PRB_MX_ADDR_MOD_SEL_VQM1 = 18,
+	PRB_MX_ADDR_MOD_SEL_VQM2 = 19,
+	PRB_MX_ADDR_MOD_SEL_MOP = 20,
+	/* Bit fields indicating which modules
+	 * are valid for each clock domain.
+	 */
+	PRB_MX_ADDR_VALID_SYS_MOD = 0x000f7ff7,
+	PRB_MX_ADDR_VALID_PCI_MOD = 0x000040c1,
+	PRB_MX_ADDR_VALID_XGM_MOD = 0x00037309,
+	PRB_MX_ADDR_VALID_FC_MOD = 0x00003001,
+	PRB_MX_ADDR_VALID_TOTAL = 34,
+
+	/* Clock domain values. */
+	PRB_MX_ADDR_CLOCK_SHIFT = 6,
+	PRB_MX_ADDR_SYS_CLOCK = 0,
+	PRB_MX_ADDR_PCI_CLOCK = 2,
+	PRB_MX_ADDR_FC_CLOCK = 5,
+	PRB_MX_ADDR_XGM_CLOCK = 6,
+
+	PRB_MX_ADDR_MAX_MUX = 64,
+};
+
+/*
+ * Control Register Set Map
+ */
+enum {
+	PROC_ADDR = 0,		/* Use semaphore */
+	PROC_DATA = 0x04,	/* Use semaphore */
+	SYS = 0x08,
+	RST_FO = 0x0c,
+	FSC = 0x10,
+	CSR = 0x14,
+	LED = 0x18,
+	ICB_RID = 0x1c,		/* Use semaphore */
+	ICB_L = 0x20,		/* Use semaphore */
+	ICB_H = 0x24,		/* Use semaphore */
+	CFG = 0x28,
+	BIOS_ADDR = 0x2c,
+	STS = 0x30,
+	INTR_EN = 0x34,
+	INTR_MASK = 0x38,
+	ISR1 = 0x3c,
+	ISR2 = 0x40,
+	ISR3 = 0x44,
+	ISR4 = 0x48,
+	REV_ID = 0x4c,
+	FRC_ECC_ERR = 0x50,
+	ERR_STS = 0x54,
+	RAM_DBG_ADDR = 0x58,
+	RAM_DBG_DATA = 0x5c,
+	ECC_ERR_CNT = 0x60,
+	SEM = 0x64,
+	GPIO_1 = 0x68,		/* Use semaphore */
+	GPIO_2 = 0x6c,		/* Use semaphore */
+	GPIO_3 = 0x70,		/* Use semaphore */
+	RSVD2 = 0x74,
+	XGMAC_ADDR = 0x78,	/* Use semaphore */
+	XGMAC_DATA = 0x7c,	/* Use semaphore */
+	NIC_ETS = 0x80,
+	CNA_ETS = 0x84,
+	FLASH_ADDR = 0x88,	/* Use semaphore */
+	FLASH_DATA = 0x8c,	/* Use semaphore */
+	CQ_STOP = 0x90,
+	PAGE_TBL_RID = 0x94,
+	WQ_PAGE_TBL_LO = 0x98,
+	WQ_PAGE_TBL_HI = 0x9c,
+	CQ_PAGE_TBL_LO = 0xa0,
+	CQ_PAGE_TBL_HI = 0xa4,
+	MAC_ADDR_IDX = 0xa8,	/* Use semaphore */
+	MAC_ADDR_DATA = 0xac,	/* Use semaphore */
+	COS_DFLT_CQ1 = 0xb0,
+	COS_DFLT_CQ2 = 0xb4,
+	ETYPE_SKIP1 = 0xb8,
+	ETYPE_SKIP2 = 0xbc,
+	SPLT_HDR = 0xc0,
+	FC_PAUSE_THRES = 0xc4,
+	NIC_PAUSE_THRES = 0xc8,
+	FC_ETHERTYPE = 0xcc,
+	FC_RCV_CFG = 0xd0,
+	NIC_RCV_CFG = 0xd4,
+	FC_COS_TAGS = 0xd8,
+	NIC_COS_TAGS = 0xdc,
+	MGMT_RCV_CFG = 0xe0,
+	RT_IDX = 0xe4,
+	RT_DATA = 0xe8,
+	RSVD7 = 0xec,
+	XG_SERDES_ADDR = 0xf0,
+	XG_SERDES_DATA = 0xf4,
+	PRB_MX_ADDR = 0xf8,	/* Use semaphore */
+	PRB_MX_DATA = 0xfc,	/* Use semaphore */
+};
+
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+#define SMALL_BUFFER_SIZE 256
+#define SMALL_BUF_MAP_SIZE SMALL_BUFFER_SIZE
+#define SPLT_SETTING  FSC_DBRST_1024
+#define SPLT_LEN 0
+#define QLGE_SB_PAD 0
+#else
+#define SMALL_BUFFER_SIZE 512
+#define SMALL_BUF_MAP_SIZE (SMALL_BUFFER_SIZE / 2)
+#define SPLT_SETTING  FSC_SH
+#define SPLT_LEN (SPLT_HDR_EP | \
+	min(SMALL_BUF_MAP_SIZE, 1023))
+#define QLGE_SB_PAD 32
+#endif
+
+/*
+ * CAM output format.
+ */
+enum {
+	CAM_OUT_ROUTE_FC = 0,
+	CAM_OUT_ROUTE_NIC = 1,
+	CAM_OUT_FUNC_SHIFT = 2,
+	CAM_OUT_RV = (1 << 4),
+	CAM_OUT_SH = (1 << 15),
+	CAM_OUT_CQ_ID_SHIFT = 5,
+};
+
+/*
+ * Mailbox  definitions
+ */
+enum {
+	/* Asynchronous Event Notifications */
+	AEN_SYS_ERR = 0x00008002,
+	AEN_LINK_UP = 0x00008011,
+	AEN_LINK_DOWN = 0x00008012,
+	AEN_IDC_CMPLT = 0x00008100,
+	AEN_IDC_REQ = 0x00008101,
+	AEN_IDC_EXT = 0x00008102,
+	AEN_DCBX_CHG = 0x00008110,
+	AEN_AEN_LOST = 0x00008120,
+	AEN_AEN_SFP_IN = 0x00008130,
+	AEN_AEN_SFP_OUT = 0x00008131,
+	AEN_FW_INIT_DONE = 0x00008400,
+	AEN_FW_INIT_FAIL = 0x00008401,
+
+	/* Mailbox Command Opcodes. */
+	MB_CMD_NOP = 0x00000000,
+	MB_CMD_EX_FW = 0x00000002,
+	MB_CMD_MB_TEST = 0x00000006,
+	MB_CMD_CSUM_TEST = 0x00000007,	/* Verify Checksum */
+	MB_CMD_ABOUT_FW = 0x00000008,
+	MB_CMD_COPY_RISC_RAM = 0x0000000a,
+	MB_CMD_LOAD_RISC_RAM = 0x0000000b,
+	MB_CMD_DUMP_RISC_RAM = 0x0000000c,
+	MB_CMD_WRITE_RAM = 0x0000000d,
+	MB_CMD_INIT_RISC_RAM = 0x0000000e,
+	MB_CMD_READ_RAM = 0x0000000f,
+	MB_CMD_STOP_FW = 0x00000014,
+	MB_CMD_MAKE_SYS_ERR = 0x0000002a,
+	MB_CMD_WRITE_SFP = 0x00000030,
+	MB_CMD_READ_SFP = 0x00000031,
+	MB_CMD_INIT_FW = 0x00000060,
+	MB_CMD_GET_IFCB = 0x00000061,
+	MB_CMD_GET_FW_STATE = 0x00000069,
+	MB_CMD_IDC_REQ = 0x00000100,	/* Inter-Driver Communication */
+	MB_CMD_IDC_ACK = 0x00000101,	/* Inter-Driver Communication */
+	MB_CMD_SET_WOL_MODE = 0x00000110,	/* Wake On Lan */
+	MB_WOL_DISABLE = 0,
+	MB_WOL_MAGIC_PKT = (1 << 1),
+	MB_WOL_FLTR = (1 << 2),
+	MB_WOL_UCAST = (1 << 3),
+	MB_WOL_MCAST = (1 << 4),
+	MB_WOL_BCAST = (1 << 5),
+	MB_WOL_LINK_UP = (1 << 6),
+	MB_WOL_LINK_DOWN = (1 << 7),
+	MB_WOL_MODE_ON = (1 << 16),		/* Wake on Lan Mode on */
+	MB_CMD_SET_WOL_FLTR = 0x00000111,	/* Wake On Lan Filter */
+	MB_CMD_CLEAR_WOL_FLTR = 0x00000112, /* Wake On Lan Filter */
+	MB_CMD_SET_WOL_MAGIC = 0x00000113,	/* Wake On Lan Magic Packet */
+	MB_CMD_CLEAR_WOL_MAGIC = 0x00000114,/* Wake On Lan Magic Packet */
+	MB_CMD_SET_WOL_IMMED = 0x00000115,
+	MB_CMD_PORT_RESET = 0x00000120,
+	MB_CMD_SET_PORT_CFG = 0x00000122,
+	MB_CMD_GET_PORT_CFG = 0x00000123,
+	MB_CMD_GET_LINK_STS = 0x00000124,
+	MB_CMD_SET_LED_CFG = 0x00000125, /* Set LED Configuration Register */
+		QL_LED_BLINK = 0x03e803e8,
+	MB_CMD_GET_LED_CFG = 0x00000126, /* Get LED Configuration Register */
+	MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */
+	MB_SET_MPI_TFK_STOP = (1 << 0),
+	MB_SET_MPI_TFK_RESUME = (1 << 1),
+	MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */
+	MB_GET_MPI_TFK_STOPPED = (1 << 0),
+	MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1),
+	/* Sub-commands for IDC request.
+	 * This describes the reason for the
+	 * IDC request.
+	 */
+	MB_CMD_IOP_NONE = 0x0000,
+	MB_CMD_IOP_PREP_UPDATE_MPI	= 0x0001,
+	MB_CMD_IOP_COMP_UPDATE_MPI	= 0x0002,
+	MB_CMD_IOP_PREP_LINK_DOWN	= 0x0010,
+	MB_CMD_IOP_DVR_START	 = 0x0100,
+	MB_CMD_IOP_FLASH_ACC	 = 0x0101,
+	MB_CMD_IOP_RESTART_MPI	= 0x0102,
+	MB_CMD_IOP_CORE_DUMP_MPI	= 0x0103,
+
+	/* Mailbox Command Status. */
+	MB_CMD_STS_GOOD = 0x00004000,	/* Success. */
+	MB_CMD_STS_INTRMDT = 0x00001000,	/* Intermediate Complete. */
+	MB_CMD_STS_INVLD_CMD = 0x00004001,	/* Invalid. */
+	MB_CMD_STS_XFC_ERR = 0x00004002,	/* Interface Error. */
+	MB_CMD_STS_CSUM_ERR = 0x00004003,	/* Csum Error. */
+	MB_CMD_STS_ERR = 0x00004005,	/* System Error. */
+	MB_CMD_STS_PARAM_ERR = 0x00004006,	/* Parameter Error. */
+};
+
+struct mbox_params {
+	u32 mbox_in[MAILBOX_COUNT];
+	u32 mbox_out[MAILBOX_COUNT];
+	int in_count;
+	int out_count;
+};
+
+struct flash_params_8012 {
+	u8 dev_id_str[4];
+	__le16 size;
+	__le16 csum;
+	__le16 ver;
+	__le16 sub_dev_id;
+	u8 mac_addr[6];
+	__le16 res;
+};
+
+/* 8000 device's flash is a different structure
+ * at a different offset in flash.
+ */
+#define FUNC0_FLASH_OFFSET 0x140200
+#define FUNC1_FLASH_OFFSET 0x140600
+
+/* Flash related data structures. */
+struct flash_params_8000 {
+	u8 dev_id_str[4];	/* "8000" */
+	__le16 ver;
+	__le16 size;
+	__le16 csum;
+	__le16 reserved0;
+	__le16 total_size;
+	__le16 entry_count;
+	u8 data_type0;
+	u8 data_size0;
+	u8 mac_addr[6];
+	u8 data_type1;
+	u8 data_size1;
+	u8 mac_addr1[6];
+	u8 data_type2;
+	u8 data_size2;
+	__le16 vlan_id;
+	u8 data_type3;
+	u8 data_size3;
+	__le16 last;
+	u8 reserved1[464];
+	__le16	subsys_ven_id;
+	__le16	subsys_dev_id;
+	u8 reserved2[4];
+};
+
+union flash_params {
+	struct flash_params_8012 flash_params_8012;
+	struct flash_params_8000 flash_params_8000;
+};
+
+/*
+ * doorbell space for the rx ring context
+ */
+struct rx_doorbell_context {
+	u32 cnsmr_idx;		/* 0x00 */
+	u32 valid;		/* 0x04 */
+	u32 reserved[4];	/* 0x08-0x14 */
+	u32 lbq_prod_idx;	/* 0x18 */
+	u32 sbq_prod_idx;	/* 0x1c */
+};
+
+/*
+ * doorbell space for the tx ring context
+ */
+struct tx_doorbell_context {
+	u32 prod_idx;		/* 0x00 */
+	u32 valid;		/* 0x04 */
+	u32 reserved[4];	/* 0x08-0x14 */
+	u32 lbq_prod_idx;	/* 0x18 */
+	u32 sbq_prod_idx;	/* 0x1c */
+};
+
+/* DATA STRUCTURES SHARED WITH HARDWARE. */
+struct tx_buf_desc {
+	__le64 addr;
+	__le32 len;
+#define TX_DESC_LEN_MASK	0x000fffff
+#define TX_DESC_C	0x40000000
+#define TX_DESC_E	0x80000000
+} __packed;
+
+/*
+ * IOCB Definitions...
+ */
+
+#define OPCODE_OB_MAC_IOCB		0x01
+#define OPCODE_OB_MAC_TSO_IOCB		0x02
+#define OPCODE_IB_MAC_IOCB		0x20
+#define OPCODE_IB_MPI_IOCB		0x21
+#define OPCODE_IB_AE_IOCB		0x3f
+
+struct qlge_ob_mac_iocb_req {
+	u8 opcode;
+	u8 flags1;
+#define OB_MAC_IOCB_REQ_OI	0x01
+#define OB_MAC_IOCB_REQ_I	0x02
+#define OB_MAC_IOCB_REQ_D	0x08
+#define OB_MAC_IOCB_REQ_F	0x10
+	u8 flags2;
+	u8 flags3;
+#define OB_MAC_IOCB_DFP	0x02
+#define OB_MAC_IOCB_V	0x04
+	__le32 reserved1[2];
+	__le16 frame_len;
+#define OB_MAC_IOCB_LEN_MASK 0x3ffff
+	__le16 reserved2;
+	u32 tid;
+	u32 txq_idx;
+	__le32 reserved3;
+	__le16 vlan_tci;
+	__le16 reserved4;
+	struct tx_buf_desc tbd[TX_DESC_PER_IOCB];
+} __packed;
+
+struct qlge_ob_mac_iocb_rsp {
+	u8 opcode;		/* */
+	u8 flags1;		/* */
+#define OB_MAC_IOCB_RSP_OI	0x01	/* */
+#define OB_MAC_IOCB_RSP_I	0x02	/* */
+#define OB_MAC_IOCB_RSP_E	0x08	/* */
+#define OB_MAC_IOCB_RSP_S	0x10	/* too Short */
+#define OB_MAC_IOCB_RSP_L	0x20	/* too Large */
+#define OB_MAC_IOCB_RSP_P	0x40	/* Padded */
+	u8 flags2;		/* */
+	u8 flags3;		/* */
+#define OB_MAC_IOCB_RSP_B	0x80	/* */
+	u32 tid;
+	u32 txq_idx;
+	__le32 reserved[13];
+} __packed;
+
+struct qlge_ob_mac_tso_iocb_req {
+	u8 opcode;
+	u8 flags1;
+#define OB_MAC_TSO_IOCB_OI	0x01
+#define OB_MAC_TSO_IOCB_I	0x02
+#define OB_MAC_TSO_IOCB_D	0x08
+#define OB_MAC_TSO_IOCB_IP4	0x40
+#define OB_MAC_TSO_IOCB_IP6	0x80
+	u8 flags2;
+#define OB_MAC_TSO_IOCB_LSO	0x20
+#define OB_MAC_TSO_IOCB_UC	0x40
+#define OB_MAC_TSO_IOCB_TC	0x80
+	u8 flags3;
+#define OB_MAC_TSO_IOCB_IC	0x01
+#define OB_MAC_TSO_IOCB_DFP	0x02
+#define OB_MAC_TSO_IOCB_V	0x04
+	__le32 reserved1[2];
+	__le32 frame_len;
+	u32 tid;
+	u32 txq_idx;
+	__le16 total_hdrs_len;
+	__le16 net_trans_offset;
+#define OB_MAC_TRANSPORT_HDR_SHIFT 6
+	__le16 vlan_tci;
+	__le16 mss;
+	struct tx_buf_desc tbd[TX_DESC_PER_IOCB];
+} __packed;
+
+struct qlge_ob_mac_tso_iocb_rsp {
+	u8 opcode;
+	u8 flags1;
+#define OB_MAC_TSO_IOCB_RSP_OI	0x01
+#define OB_MAC_TSO_IOCB_RSP_I	0x02
+#define OB_MAC_TSO_IOCB_RSP_E	0x08
+#define OB_MAC_TSO_IOCB_RSP_S	0x10
+#define OB_MAC_TSO_IOCB_RSP_L	0x20
+#define OB_MAC_TSO_IOCB_RSP_P	0x40
+	u8 flags2;		/* */
+	u8 flags3;		/* */
+#define OB_MAC_TSO_IOCB_RSP_B	0x8000
+	u32 tid;
+	u32 txq_idx;
+	__le32 reserved2[13];
+} __packed;
+
+struct qlge_ib_mac_iocb_rsp {
+	u8 opcode;		/* 0x20 */
+	u8 flags1;
+#define IB_MAC_IOCB_RSP_OI	0x01	/* Override intr delay */
+#define IB_MAC_IOCB_RSP_I	0x02	/* Disable Intr Generation */
+#define IB_MAC_CSUM_ERR_MASK	0x1c	/* A mask to use for csum errs */
+#define IB_MAC_IOCB_RSP_TE	0x04	/* Checksum error */
+#define IB_MAC_IOCB_RSP_NU	0x08	/* No checksum rcvd */
+#define IB_MAC_IOCB_RSP_IE	0x10	/* IPv4 checksum error */
+#define IB_MAC_IOCB_RSP_M_MASK	0x60	/* Multicast info */
+#define IB_MAC_IOCB_RSP_M_NONE	0x00	/* Not mcast frame */
+#define IB_MAC_IOCB_RSP_M_HASH	0x20	/* HASH mcast frame */
+#define IB_MAC_IOCB_RSP_M_REG	0x40	/* Registered mcast frame */
+#define IB_MAC_IOCB_RSP_M_PROM	0x60	/* Promiscuous mcast frame */
+#define IB_MAC_IOCB_RSP_B	0x80	/* Broadcast frame */
+	u8 flags2;
+#define IB_MAC_IOCB_RSP_P	0x01	/* Promiscuous frame */
+#define IB_MAC_IOCB_RSP_V	0x02	/* Vlan tag present */
+#define IB_MAC_IOCB_RSP_ERR_MASK	0x1c	/*  */
+#define IB_MAC_IOCB_RSP_ERR_CODE_ERR	0x04
+#define IB_MAC_IOCB_RSP_ERR_OVERSIZE	0x08
+#define IB_MAC_IOCB_RSP_ERR_UNDERSIZE	0x10
+#define IB_MAC_IOCB_RSP_ERR_PREAMBLE	0x14
+#define IB_MAC_IOCB_RSP_ERR_FRAME_LEN	0x18
+#define IB_MAC_IOCB_RSP_ERR_CRC		0x1c
+#define IB_MAC_IOCB_RSP_U	0x20	/* UDP packet */
+#define IB_MAC_IOCB_RSP_T	0x40	/* TCP packet */
+#define IB_MAC_IOCB_RSP_FO	0x80	/* Failover port */
+	u8 flags3;
+#define IB_MAC_IOCB_RSP_RSS_MASK	0x07	/* RSS mask */
+#define IB_MAC_IOCB_RSP_M_NONE		0x00	/* No RSS match */
+#define IB_MAC_IOCB_RSP_M_IPV4		0x04	/* IPv4 RSS match */
+#define IB_MAC_IOCB_RSP_M_IPV6		0x02	/* IPv6 RSS match */
+#define IB_MAC_IOCB_RSP_M_TCP_V4	0x05	/* TCP with IPv4 */
+#define IB_MAC_IOCB_RSP_M_TCP_V6	0x03	/* TCP with IPv6 */
+#define IB_MAC_IOCB_RSP_V4		0x08	/* IPV4 */
+#define IB_MAC_IOCB_RSP_V6		0x10	/* IPV6 */
+#define IB_MAC_IOCB_RSP_IH		0x20	/* Split after IP header */
+#define IB_MAC_IOCB_RSP_DS		0x40	/* data is in small buffer */
+#define IB_MAC_IOCB_RSP_DL		0x80	/* data is in large buffer */
+	__le32 data_len;	/* */
+	__le64 data_addr;	/* */
+	__le32 rss;		/* */
+	__le16 vlan_id;		/* 12 bits */
+#define IB_MAC_IOCB_RSP_C	0x1000	/* VLAN CFI bit */
+#define IB_MAC_IOCB_RSP_COS_SHIFT	12	/* class of service value */
+#define IB_MAC_IOCB_RSP_VLAN_MASK	0x0ffff
+
+	__le16 reserved1;
+	__le32 reserved2[6];
+	u8 reserved3[3];
+	u8 flags4;
+#define IB_MAC_IOCB_RSP_HV	0x20
+#define IB_MAC_IOCB_RSP_HS	0x40
+#define IB_MAC_IOCB_RSP_HL	0x80
+	__le32 hdr_len;		/* */
+	__le64 hdr_addr;	/* */
+} __packed;
+
+struct qlge_ib_ae_iocb_rsp {
+	u8 opcode;
+	u8 flags1;
+#define IB_AE_IOCB_RSP_OI		0x01
+#define IB_AE_IOCB_RSP_I		0x02
+	u8 event;
+#define LINK_UP_EVENT			0x00
+#define LINK_DOWN_EVENT			0x01
+#define CAM_LOOKUP_ERR_EVENT		0x06
+#define SOFT_ECC_ERROR_EVENT		0x07
+#define MGMT_ERR_EVENT			0x08
+#define TEN_GIG_MAC_EVENT		0x09
+#define GPI0_H2L_EVENT			0x10
+#define GPI0_L2H_EVENT			0x20
+#define GPI1_H2L_EVENT			0x11
+#define GPI1_L2H_EVENT			0x21
+#define PCI_ERR_ANON_BUF_RD		0x40
+	u8 q_id;
+	__le32 reserved[15];
+} __packed;
+
+/*
+ * These three structures are for generic
+ * handling of ib and ob iocbs.
+ */
+struct qlge_net_rsp_iocb {
+	u8 opcode;
+	u8 flags0;
+	__le16 length;
+	__le32 tid;
+	__le32 reserved[14];
+} __packed;
+
+struct qlge_net_req_iocb {
+	u8 opcode;
+	u8 flags0;
+	__le16 flags1;
+	__le32 tid;
+	__le32 reserved1[30];
+} __packed;
+
+/*
+ * tx ring initialization control block for chip.
+ * It is defined as:
+ * "Work Queue Initialization Control Block"
+ */
+struct wqicb {
+	__le16 len;
+#define Q_LEN_V		BIT(4)
+#define Q_LEN_CPP_CONT	0x0000
+#define Q_LEN_CPP_16	0x0001
+#define Q_LEN_CPP_32	0x0002
+#define Q_LEN_CPP_64	0x0003
+#define Q_LEN_CPP_512	0x0006
+	__le16 flags;
+#define Q_PRI_SHIFT	1
+#define Q_FLAGS_LC	0x1000
+#define Q_FLAGS_LB	0x2000
+#define Q_FLAGS_LI	0x4000
+#define Q_FLAGS_LO	0x8000
+	__le16 cq_id_rss;
+#define Q_CQ_ID_RSS_RV 0x8000
+	__le16 rid;
+	__le64 addr;
+	__le64 cnsmr_idx_addr;
+} __packed;
+
+/*
+ * rx ring initialization control block for chip.
+ * It is defined as:
+ * "Completion Queue Initialization Control Block"
+ */
+struct cqicb {
+	u8 msix_vect;
+	u8 reserved1;
+	u8 reserved2;
+	u8 flags;
+#define FLAGS_LV	0x08
+#define FLAGS_LS	0x10
+#define FLAGS_LL	0x20
+#define FLAGS_LI	0x40
+#define FLAGS_LC	0x80
+	__le16 len;
+#define LEN_V		BIT(4)
+#define LEN_CPP_CONT	0x0000
+#define LEN_CPP_32	0x0001
+#define LEN_CPP_64	0x0002
+#define LEN_CPP_128	0x0003
+	__le16 rid;
+	__le64 addr;
+	__le64 prod_idx_addr;
+	__le16 pkt_delay;
+	__le16 irq_delay;
+	__le64 lbq_addr;
+	__le16 lbq_buf_size;
+	__le16 lbq_len;		/* entry count */
+	__le64 sbq_addr;
+	__le16 sbq_buf_size;
+	__le16 sbq_len;		/* entry count */
+} __packed;
+
+struct ricb {
+	u8 base_cq;
+#define RSS_L4K 0x80
+	u8 flags;
+#define RSS_L6K 0x01
+#define RSS_LI  0x02
+#define RSS_LB  0x04
+#define RSS_LM  0x08
+#define RSS_RI4 0x10
+#define RSS_RT4 0x20
+#define RSS_RI6 0x40
+#define RSS_RT6 0x80
+	__le16 mask;
+	u8 hash_cq_id[1024];
+	__le32 ipv6_hash_key[10];
+	__le32 ipv4_hash_key[4];
+} __packed;
+
+/* SOFTWARE/DRIVER DATA STRUCTURES. */
+
+struct qlge_oal {
+	struct tx_buf_desc oal[TX_DESC_PER_OAL];
+};
+
+struct map_list {
+	DEFINE_DMA_UNMAP_ADDR(mapaddr);
+	DEFINE_DMA_UNMAP_LEN(maplen);
+};
+
+struct tx_ring_desc {
+	struct sk_buff *skb;
+	struct qlge_ob_mac_iocb_req *queue_entry;
+	u32 index;
+	struct qlge_oal oal;
+	struct map_list map[MAX_SKB_FRAGS + 2];
+	int map_cnt;
+	struct tx_ring_desc *next;
+};
+
+#define QL_TXQ_IDX(qdev, skb) (smp_processor_id() % (qdev->tx_ring_count))
+
+struct tx_ring {
+	/*
+	 * queue info.
+	 */
+	struct wqicb wqicb;	/* structure used to inform chip of new queue */
+	void *wq_base;		/* pci_alloc:virtual addr for tx */
+	dma_addr_t wq_base_dma;	/* pci_alloc:dma addr for tx */
+	__le32 *cnsmr_idx_sh_reg;	/* shadow copy of consumer idx */
+	dma_addr_t cnsmr_idx_sh_reg_dma;	/* dma-shadow copy of consumer */
+	u32 wq_size;		/* size in bytes of queue area */
+	u32 wq_len;		/* number of entries in queue */
+	void __iomem *prod_idx_db_reg;	/* doorbell area index reg at offset 0x00 */
+	void __iomem *valid_db_reg;	/* doorbell area valid reg at offset 0x04 */
+	u16 prod_idx;		/* current value for prod idx */
+	u16 cq_id;		/* completion (rx) queue for tx completions */
+	u8 wq_id;		/* queue id for this entry */
+	u8 reserved1[3];
+	struct tx_ring_desc *q;	/* descriptor list for the queue */
+	spinlock_t lock;
+	atomic_t tx_count;	/* counts down for every outstanding IO */
+	struct delayed_work tx_work;
+	struct qlge_adapter *qdev;
+	u64 tx_packets;
+	u64 tx_bytes;
+	u64 tx_errors;
+};
+
+struct qlge_page_chunk {
+	struct page *page;
+	void *va; /* virt addr including offset */
+	unsigned int offset;
+};
+
+struct qlge_bq_desc {
+	union {
+		/* for large buffers */
+		struct qlge_page_chunk pg_chunk;
+		/* for small buffers */
+		struct sk_buff *skb;
+	} p;
+	dma_addr_t dma_addr;
+	/* address in ring where the buffer address is written for the device */
+	__le64 *buf_ptr;
+	u32 index;
+};
+
+/* buffer queue */
+struct qlge_bq {
+	__le64 *base;
+	dma_addr_t base_dma;
+	__le64 *base_indirect;
+	dma_addr_t base_indirect_dma;
+	struct qlge_bq_desc *queue;
+	/* prod_idx is the index of the first buffer that may NOT be used by
+	 * hw, ie. one after the last. Advanced by sw.
+	 */
+	void __iomem *prod_idx_db_reg;
+	/* next index where sw should refill a buffer for hw */
+	u16 next_to_use;
+	/* next index where sw expects to find a buffer filled by hw */
+	u16 next_to_clean;
+	enum {
+		QLGE_SB,		/* small buffer */
+		QLGE_LB,		/* large buffer */
+	} type;
+};
+
+#define QLGE_BQ_CONTAINER(bq) \
+({ \
+	typeof(bq) _bq = bq; \
+	(struct rx_ring *)((char *)_bq - (_bq->type == QLGE_SB ? \
+					  offsetof(struct rx_ring, sbq) : \
+					  offsetof(struct rx_ring, lbq))); \
+})
+
+/* Experience shows that the device ignores the low 4 bits of the tail index.
+ * Refill up to a x16 multiple.
+ */
+#define QLGE_BQ_ALIGN(index) ALIGN_DOWN(index, 16)
+
+#define QLGE_BQ_WRAP(index) ((index) & (QLGE_BQ_LEN - 1))
+
+#define QLGE_BQ_HW_OWNED(bq) \
+({ \
+	typeof(bq) _bq = bq; \
+	QLGE_BQ_WRAP(QLGE_BQ_ALIGN((_bq)->next_to_use) - \
+		     (_bq)->next_to_clean); \
+})
+
+struct rx_ring {
+	struct cqicb cqicb;	/* The chip's completion queue init control block. */
+
+	/* Completion queue elements. */
+	void *cq_base;
+	dma_addr_t cq_base_dma;
+	u32 cq_size;
+	u32 cq_len;
+	u16 cq_id;
+	__le32 *prod_idx_sh_reg;	/* Shadowed producer register. */
+	dma_addr_t prod_idx_sh_reg_dma;
+	void __iomem *cnsmr_idx_db_reg;	/* PCI doorbell mem area + 0 */
+	u32 cnsmr_idx;		/* current sw idx */
+	struct qlge_net_rsp_iocb *curr_entry;	/* next entry on queue */
+	void __iomem *valid_db_reg;	/* PCI doorbell mem area + 0x04 */
+
+	/* Large buffer queue elements. */
+	struct qlge_bq lbq;
+	struct qlge_page_chunk master_chunk;
+	dma_addr_t chunk_dma_addr;
+
+	/* Small buffer queue elements. */
+	struct qlge_bq sbq;
+
+	/* Misc. handler elements. */
+	u32 irq;		/* Which vector this ring is assigned. */
+	u32 cpu;		/* Which CPU this should run on. */
+	struct delayed_work refill_work;
+	char name[IFNAMSIZ + 5];
+	struct napi_struct napi;
+	u8 reserved;
+	struct qlge_adapter *qdev;
+	u64 rx_packets;
+	u64 rx_multicast;
+	u64 rx_bytes;
+	u64 rx_dropped;
+	u64 rx_errors;
+};
+
+/*
+ * RSS Initialization Control Block
+ */
+struct hash_id {
+	u8 value[4];
+};
+
+struct nic_stats {
+	/*
+	 * These stats come from offset 200h to 278h
+	 * in the XGMAC register.
+	 */
+	u64 tx_pkts;
+	u64 tx_bytes;
+	u64 tx_mcast_pkts;
+	u64 tx_bcast_pkts;
+	u64 tx_ucast_pkts;
+	u64 tx_ctl_pkts;
+	u64 tx_pause_pkts;
+	u64 tx_64_pkt;
+	u64 tx_65_to_127_pkt;
+	u64 tx_128_to_255_pkt;
+	u64 tx_256_511_pkt;
+	u64 tx_512_to_1023_pkt;
+	u64 tx_1024_to_1518_pkt;
+	u64 tx_1519_to_max_pkt;
+	u64 tx_undersize_pkt;
+	u64 tx_oversize_pkt;
+
+	/*
+	 * These stats come from offset 300h to 3C8h
+	 * in the XGMAC register.
+	 */
+	u64 rx_bytes;
+	u64 rx_bytes_ok;
+	u64 rx_pkts;
+	u64 rx_pkts_ok;
+	u64 rx_bcast_pkts;
+	u64 rx_mcast_pkts;
+	u64 rx_ucast_pkts;
+	u64 rx_undersize_pkts;
+	u64 rx_oversize_pkts;
+	u64 rx_jabber_pkts;
+	u64 rx_undersize_fcerr_pkts;
+	u64 rx_drop_events;
+	u64 rx_fcerr_pkts;
+	u64 rx_align_err;
+	u64 rx_symbol_err;
+	u64 rx_mac_err;
+	u64 rx_ctl_pkts;
+	u64 rx_pause_pkts;
+	u64 rx_64_pkts;
+	u64 rx_65_to_127_pkts;
+	u64 rx_128_255_pkts;
+	u64 rx_256_511_pkts;
+	u64 rx_512_to_1023_pkts;
+	u64 rx_1024_to_1518_pkts;
+	u64 rx_1519_to_max_pkts;
+	u64 rx_len_err_pkts;
+	/* Receive Mac Err stats */
+	u64 rx_code_err;
+	u64 rx_oversize_err;
+	u64 rx_undersize_err;
+	u64 rx_preamble_err;
+	u64 rx_frame_len_err;
+	u64 rx_crc_err;
+	u64 rx_err_count;
+	/*
+	 * These stats come from offset 500h to 5C8h
+	 * in the XGMAC register.
+	 */
+	u64 tx_cbfc_pause_frames0;
+	u64 tx_cbfc_pause_frames1;
+	u64 tx_cbfc_pause_frames2;
+	u64 tx_cbfc_pause_frames3;
+	u64 tx_cbfc_pause_frames4;
+	u64 tx_cbfc_pause_frames5;
+	u64 tx_cbfc_pause_frames6;
+	u64 tx_cbfc_pause_frames7;
+	u64 rx_cbfc_pause_frames0;
+	u64 rx_cbfc_pause_frames1;
+	u64 rx_cbfc_pause_frames2;
+	u64 rx_cbfc_pause_frames3;
+	u64 rx_cbfc_pause_frames4;
+	u64 rx_cbfc_pause_frames5;
+	u64 rx_cbfc_pause_frames6;
+	u64 rx_cbfc_pause_frames7;
+	u64 rx_nic_fifo_drop;
+};
+
+/* Firmware coredump internal register address/length pairs. */
+enum {
+	MPI_CORE_REGS_ADDR = 0x00030000,
+	MPI_CORE_REGS_CNT = 127,
+	MPI_CORE_SH_REGS_CNT = 16,
+	TEST_REGS_ADDR = 0x00001000,
+	TEST_REGS_CNT = 23,
+	RMII_REGS_ADDR = 0x00001040,
+	RMII_REGS_CNT = 64,
+	FCMAC1_REGS_ADDR = 0x00001080,
+	FCMAC2_REGS_ADDR = 0x000010c0,
+	FCMAC_REGS_CNT = 64,
+	FC1_MBX_REGS_ADDR = 0x00001100,
+	FC2_MBX_REGS_ADDR = 0x00001240,
+	FC_MBX_REGS_CNT = 64,
+	IDE_REGS_ADDR = 0x00001140,
+	IDE_REGS_CNT = 64,
+	NIC1_MBX_REGS_ADDR = 0x00001180,
+	NIC2_MBX_REGS_ADDR = 0x00001280,
+	NIC_MBX_REGS_CNT = 64,
+	SMBUS_REGS_ADDR = 0x00001200,
+	SMBUS_REGS_CNT = 64,
+	I2C_REGS_ADDR = 0x00001fc0,
+	I2C_REGS_CNT = 64,
+	MEMC_REGS_ADDR = 0x00003000,
+	MEMC_REGS_CNT = 256,
+	PBUS_REGS_ADDR = 0x00007c00,
+	PBUS_REGS_CNT = 256,
+	MDE_REGS_ADDR = 0x00010000,
+	MDE_REGS_CNT = 6,
+	CODE_RAM_ADDR = 0x00020000,
+	CODE_RAM_CNT = 0x2000,
+	MEMC_RAM_ADDR = 0x00100000,
+	MEMC_RAM_CNT = 0x2000,
+};
+
+#define MPI_COREDUMP_COOKIE 0x5555aaaa
+struct mpi_coredump_global_header {
+	u32	cookie;
+	u8	id_string[16];
+	u32	time_lo;
+	u32	time_hi;
+	u32	image_size;
+	u32	header_size;
+	u8	info[220];
+};
+
+struct mpi_coredump_segment_header {
+	u32	cookie;
+	u32	seg_num;
+	u32	seg_size;
+	u32	extra;
+	u8	description[16];
+};
+
+/* Firmware coredump header segment numbers. */
+enum {
+	CORE_SEG_NUM = 1,
+	TEST_LOGIC_SEG_NUM = 2,
+	RMII_SEG_NUM = 3,
+	FCMAC1_SEG_NUM = 4,
+	FCMAC2_SEG_NUM = 5,
+	FC1_MBOX_SEG_NUM = 6,
+	IDE_SEG_NUM = 7,
+	NIC1_MBOX_SEG_NUM = 8,
+	SMBUS_SEG_NUM = 9,
+	FC2_MBOX_SEG_NUM = 10,
+	NIC2_MBOX_SEG_NUM = 11,
+	I2C_SEG_NUM = 12,
+	MEMC_SEG_NUM = 13,
+	PBUS_SEG_NUM = 14,
+	MDE_SEG_NUM = 15,
+	NIC1_CONTROL_SEG_NUM = 16,
+	NIC2_CONTROL_SEG_NUM = 17,
+	NIC1_XGMAC_SEG_NUM = 18,
+	NIC2_XGMAC_SEG_NUM = 19,
+	WCS_RAM_SEG_NUM = 20,
+	MEMC_RAM_SEG_NUM = 21,
+	XAUI_AN_SEG_NUM = 22,
+	XAUI_HSS_PCS_SEG_NUM = 23,
+	XFI_AN_SEG_NUM = 24,
+	XFI_TRAIN_SEG_NUM = 25,
+	XFI_HSS_PCS_SEG_NUM = 26,
+	XFI_HSS_TX_SEG_NUM = 27,
+	XFI_HSS_RX_SEG_NUM = 28,
+	XFI_HSS_PLL_SEG_NUM = 29,
+	MISC_NIC_INFO_SEG_NUM = 30,
+	INTR_STATES_SEG_NUM = 31,
+	CAM_ENTRIES_SEG_NUM = 32,
+	ROUTING_WORDS_SEG_NUM = 33,
+	ETS_SEG_NUM = 34,
+	PROBE_DUMP_SEG_NUM = 35,
+	ROUTING_INDEX_SEG_NUM = 36,
+	MAC_PROTOCOL_SEG_NUM = 37,
+	XAUI2_AN_SEG_NUM = 38,
+	XAUI2_HSS_PCS_SEG_NUM = 39,
+	XFI2_AN_SEG_NUM = 40,
+	XFI2_TRAIN_SEG_NUM = 41,
+	XFI2_HSS_PCS_SEG_NUM = 42,
+	XFI2_HSS_TX_SEG_NUM = 43,
+	XFI2_HSS_RX_SEG_NUM = 44,
+	XFI2_HSS_PLL_SEG_NUM = 45,
+	SEM_REGS_SEG_NUM = 50
+
+};
+
+/* There are 64 generic NIC registers. */
+#define NIC_REGS_DUMP_WORD_COUNT		64
+/* XGMAC word count. */
+#define XGMAC_DUMP_WORD_COUNT		(XGMAC_REGISTER_END / 4)
+/* Word counts for the SERDES blocks. */
+#define XG_SERDES_XAUI_AN_COUNT		14
+#define XG_SERDES_XAUI_HSS_PCS_COUNT	33
+#define XG_SERDES_XFI_AN_COUNT		14
+#define XG_SERDES_XFI_TRAIN_COUNT		12
+#define XG_SERDES_XFI_HSS_PCS_COUNT	15
+#define XG_SERDES_XFI_HSS_TX_COUNT		32
+#define XG_SERDES_XFI_HSS_RX_COUNT		32
+#define XG_SERDES_XFI_HSS_PLL_COUNT	32
+
+/* There are 2 CNA ETS and 8 NIC ETS registers. */
+#define ETS_REGS_DUMP_WORD_COUNT		10
+
+/* Each probe mux entry stores the probe type plus 64 entries
+ * that are each 64-bits in length. There are a total of
+ * 34 (PRB_MX_ADDR_VALID_TOTAL) valid probes.
+ */
+#define PRB_MX_ADDR_PRB_WORD_COUNT		(1 + (PRB_MX_ADDR_MAX_MUX * 2))
+#define PRB_MX_DUMP_TOT_COUNT		(PRB_MX_ADDR_PRB_WORD_COUNT * \
+							PRB_MX_ADDR_VALID_TOTAL)
+/* Each routing entry consists of 4 32-bit words.
+ * They are route type, index, index word, and result.
+ * There are 2 route blocks with 8 entries each and
+ *  2 NIC blocks with 16 entries each.
+ * The totol entries is 48 with 4 words each.
+ */
+#define RT_IDX_DUMP_ENTRIES			48
+#define RT_IDX_DUMP_WORDS_PER_ENTRY	4
+#define RT_IDX_DUMP_TOT_WORDS		(RT_IDX_DUMP_ENTRIES * \
+						RT_IDX_DUMP_WORDS_PER_ENTRY)
+/* There are 10 address blocks in filter, each with
+ * different entry counts and different word-count-per-entry.
+ */
+#define MAC_ADDR_DUMP_ENTRIES \
+	((MAC_ADDR_MAX_CAM_ENTRIES * MAC_ADDR_MAX_CAM_WCOUNT) + \
+	(MAC_ADDR_MAX_MULTICAST_ENTRIES * MAC_ADDR_MAX_MULTICAST_WCOUNT) + \
+	(MAC_ADDR_MAX_VLAN_ENTRIES * MAC_ADDR_MAX_VLAN_WCOUNT) + \
+	(MAC_ADDR_MAX_MCAST_FLTR_ENTRIES * MAC_ADDR_MAX_MCAST_FLTR_WCOUNT) + \
+	(MAC_ADDR_MAX_FC_MAC_ENTRIES * MAC_ADDR_MAX_FC_MAC_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_MAC_ENTRIES * MAC_ADDR_MAX_MGMT_MAC_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_VLAN_ENTRIES * MAC_ADDR_MAX_MGMT_VLAN_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_V4_ENTRIES * MAC_ADDR_MAX_MGMT_V4_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_V6_ENTRIES * MAC_ADDR_MAX_MGMT_V6_WCOUNT) + \
+	(MAC_ADDR_MAX_MGMT_TU_DP_ENTRIES * MAC_ADDR_MAX_MGMT_TU_DP_WCOUNT))
+#define MAC_ADDR_DUMP_WORDS_PER_ENTRY	2
+#define MAC_ADDR_DUMP_TOT_WORDS		(MAC_ADDR_DUMP_ENTRIES * \
+						MAC_ADDR_DUMP_WORDS_PER_ENTRY)
+/* Maximum of 4 functions whose semaphore registeres are
+ * in the coredump.
+ */
+#define MAX_SEMAPHORE_FUNCTIONS		4
+/* Defines for access the MPI shadow registers. */
+#define RISC_124		0x0003007c
+#define RISC_127		0x0003007f
+#define SHADOW_OFFSET	0xb0000000
+#define SHADOW_REG_SHIFT	20
+
+struct qlge_nic_misc {
+	u32 rx_ring_count;
+	u32 tx_ring_count;
+	u32 intr_count;
+	u32 function;
+};
+
+struct qlge_reg_dump {
+	/* segment 0 */
+	struct mpi_coredump_global_header mpi_global_header;
+
+	/* segment 16 */
+	struct mpi_coredump_segment_header nic_regs_seg_hdr;
+	u32 nic_regs[64];
+
+	/* segment 30 */
+	struct mpi_coredump_segment_header misc_nic_seg_hdr;
+	struct qlge_nic_misc misc_nic_info;
+
+	/* segment 31 */
+	/* one interrupt state for each CQ */
+	struct mpi_coredump_segment_header intr_states_seg_hdr;
+	u32 intr_states[MAX_CPUS];
+
+	/* segment 32 */
+	/* 3 cam words each for 16 unicast,
+	 * 2 cam words for each of 32 multicast.
+	 */
+	struct mpi_coredump_segment_header cam_entries_seg_hdr;
+	u32 cam_entries[(16 * 3) + (32 * 3)];
+
+	/* segment 33 */
+	struct mpi_coredump_segment_header nic_routing_words_seg_hdr;
+	u32 nic_routing_words[16];
+
+	/* segment 34 */
+	struct mpi_coredump_segment_header ets_seg_hdr;
+	u32 ets[8 + 2];
+};
+
+struct qlge_mpi_coredump {
+	/* segment 0 */
+	struct mpi_coredump_global_header mpi_global_header;
+
+	/* segment 1 */
+	struct mpi_coredump_segment_header core_regs_seg_hdr;
+	u32 mpi_core_regs[MPI_CORE_REGS_CNT];
+	u32 mpi_core_sh_regs[MPI_CORE_SH_REGS_CNT];
+
+	/* segment 2 */
+	struct mpi_coredump_segment_header test_logic_regs_seg_hdr;
+	u32 test_logic_regs[TEST_REGS_CNT];
+
+	/* segment 3 */
+	struct mpi_coredump_segment_header rmii_regs_seg_hdr;
+	u32 rmii_regs[RMII_REGS_CNT];
+
+	/* segment 4 */
+	struct mpi_coredump_segment_header fcmac1_regs_seg_hdr;
+	u32 fcmac1_regs[FCMAC_REGS_CNT];
+
+	/* segment 5 */
+	struct mpi_coredump_segment_header fcmac2_regs_seg_hdr;
+	u32 fcmac2_regs[FCMAC_REGS_CNT];
+
+	/* segment 6 */
+	struct mpi_coredump_segment_header fc1_mbx_regs_seg_hdr;
+	u32 fc1_mbx_regs[FC_MBX_REGS_CNT];
+
+	/* segment 7 */
+	struct mpi_coredump_segment_header ide_regs_seg_hdr;
+	u32 ide_regs[IDE_REGS_CNT];
+
+	/* segment 8 */
+	struct mpi_coredump_segment_header nic1_mbx_regs_seg_hdr;
+	u32 nic1_mbx_regs[NIC_MBX_REGS_CNT];
+
+	/* segment 9 */
+	struct mpi_coredump_segment_header smbus_regs_seg_hdr;
+	u32 smbus_regs[SMBUS_REGS_CNT];
+
+	/* segment 10 */
+	struct mpi_coredump_segment_header fc2_mbx_regs_seg_hdr;
+	u32 fc2_mbx_regs[FC_MBX_REGS_CNT];
+
+	/* segment 11 */
+	struct mpi_coredump_segment_header nic2_mbx_regs_seg_hdr;
+	u32 nic2_mbx_regs[NIC_MBX_REGS_CNT];
+
+	/* segment 12 */
+	struct mpi_coredump_segment_header i2c_regs_seg_hdr;
+	u32 i2c_regs[I2C_REGS_CNT];
+	/* segment 13 */
+	struct mpi_coredump_segment_header memc_regs_seg_hdr;
+	u32 memc_regs[MEMC_REGS_CNT];
+
+	/* segment 14 */
+	struct mpi_coredump_segment_header pbus_regs_seg_hdr;
+	u32 pbus_regs[PBUS_REGS_CNT];
+
+	/* segment 15 */
+	struct mpi_coredump_segment_header mde_regs_seg_hdr;
+	u32 mde_regs[MDE_REGS_CNT];
+
+	/* segment 16 */
+	struct mpi_coredump_segment_header nic_regs_seg_hdr;
+	u32 nic_regs[NIC_REGS_DUMP_WORD_COUNT];
+
+	/* segment 17 */
+	struct mpi_coredump_segment_header nic2_regs_seg_hdr;
+	u32 nic2_regs[NIC_REGS_DUMP_WORD_COUNT];
+
+	/* segment 18 */
+	struct mpi_coredump_segment_header xgmac1_seg_hdr;
+	u32 xgmac1[XGMAC_DUMP_WORD_COUNT];
+
+	/* segment 19 */
+	struct mpi_coredump_segment_header xgmac2_seg_hdr;
+	u32 xgmac2[XGMAC_DUMP_WORD_COUNT];
+
+	/* segment 20 */
+	struct mpi_coredump_segment_header code_ram_seg_hdr;
+	u32 code_ram[CODE_RAM_CNT];
+
+	/* segment 21 */
+	struct mpi_coredump_segment_header memc_ram_seg_hdr;
+	u32 memc_ram[MEMC_RAM_CNT];
+
+	/* segment 22 */
+	struct mpi_coredump_segment_header xaui_an_hdr;
+	u32 serdes_xaui_an[XG_SERDES_XAUI_AN_COUNT];
+
+	/* segment 23 */
+	struct mpi_coredump_segment_header xaui_hss_pcs_hdr;
+	u32 serdes_xaui_hss_pcs[XG_SERDES_XAUI_HSS_PCS_COUNT];
+
+	/* segment 24 */
+	struct mpi_coredump_segment_header xfi_an_hdr;
+	u32 serdes_xfi_an[XG_SERDES_XFI_AN_COUNT];
+
+	/* segment 25 */
+	struct mpi_coredump_segment_header xfi_train_hdr;
+	u32 serdes_xfi_train[XG_SERDES_XFI_TRAIN_COUNT];
+
+	/* segment 26 */
+	struct mpi_coredump_segment_header xfi_hss_pcs_hdr;
+	u32 serdes_xfi_hss_pcs[XG_SERDES_XFI_HSS_PCS_COUNT];
+
+	/* segment 27 */
+	struct mpi_coredump_segment_header xfi_hss_tx_hdr;
+	u32 serdes_xfi_hss_tx[XG_SERDES_XFI_HSS_TX_COUNT];
+
+	/* segment 28 */
+	struct mpi_coredump_segment_header xfi_hss_rx_hdr;
+	u32 serdes_xfi_hss_rx[XG_SERDES_XFI_HSS_RX_COUNT];
+
+	/* segment 29 */
+	struct mpi_coredump_segment_header xfi_hss_pll_hdr;
+	u32 serdes_xfi_hss_pll[XG_SERDES_XFI_HSS_PLL_COUNT];
+
+	/* segment 30 */
+	struct mpi_coredump_segment_header misc_nic_seg_hdr;
+	struct qlge_nic_misc misc_nic_info;
+
+	/* segment 31 */
+	/* one interrupt state for each CQ */
+	struct mpi_coredump_segment_header intr_states_seg_hdr;
+	u32 intr_states[MAX_RX_RINGS];
+
+	/* segment 32 */
+	/* 3 cam words each for 16 unicast,
+	 * 2 cam words for each of 32 multicast.
+	 */
+	struct mpi_coredump_segment_header cam_entries_seg_hdr;
+	u32 cam_entries[(16 * 3) + (32 * 3)];
+
+	/* segment 33 */
+	struct mpi_coredump_segment_header nic_routing_words_seg_hdr;
+	u32 nic_routing_words[16];
+	/* segment 34 */
+	struct mpi_coredump_segment_header ets_seg_hdr;
+	u32 ets[ETS_REGS_DUMP_WORD_COUNT];
+
+	/* segment 35 */
+	struct mpi_coredump_segment_header probe_dump_seg_hdr;
+	u32 probe_dump[PRB_MX_DUMP_TOT_COUNT];
+
+	/* segment 36 */
+	struct mpi_coredump_segment_header routing_reg_seg_hdr;
+	u32 routing_regs[RT_IDX_DUMP_TOT_WORDS];
+
+	/* segment 37 */
+	struct mpi_coredump_segment_header mac_prot_reg_seg_hdr;
+	u32 mac_prot_regs[MAC_ADDR_DUMP_TOT_WORDS];
+
+	/* segment 38 */
+	struct mpi_coredump_segment_header xaui2_an_hdr;
+	u32 serdes2_xaui_an[XG_SERDES_XAUI_AN_COUNT];
+
+	/* segment 39 */
+	struct mpi_coredump_segment_header xaui2_hss_pcs_hdr;
+	u32 serdes2_xaui_hss_pcs[XG_SERDES_XAUI_HSS_PCS_COUNT];
+
+	/* segment 40 */
+	struct mpi_coredump_segment_header xfi2_an_hdr;
+	u32 serdes2_xfi_an[XG_SERDES_XFI_AN_COUNT];
+
+	/* segment 41 */
+	struct mpi_coredump_segment_header xfi2_train_hdr;
+	u32 serdes2_xfi_train[XG_SERDES_XFI_TRAIN_COUNT];
+
+	/* segment 42 */
+	struct mpi_coredump_segment_header xfi2_hss_pcs_hdr;
+	u32 serdes2_xfi_hss_pcs[XG_SERDES_XFI_HSS_PCS_COUNT];
+
+	/* segment 43 */
+	struct mpi_coredump_segment_header xfi2_hss_tx_hdr;
+	u32 serdes2_xfi_hss_tx[XG_SERDES_XFI_HSS_TX_COUNT];
+
+	/* segment 44 */
+	struct mpi_coredump_segment_header xfi2_hss_rx_hdr;
+	u32 serdes2_xfi_hss_rx[XG_SERDES_XFI_HSS_RX_COUNT];
+
+	/* segment 45 */
+	struct mpi_coredump_segment_header xfi2_hss_pll_hdr;
+	u32 serdes2_xfi_hss_pll[XG_SERDES_XFI_HSS_PLL_COUNT];
+
+	/* segment 50 */
+	/* semaphore register for all 5 functions */
+	struct mpi_coredump_segment_header sem_regs_seg_hdr;
+	u32 sem_regs[MAX_SEMAPHORE_FUNCTIONS];
+};
+
+/*
+ * intr_context structure is used during initialization
+ * to hook the interrupts.  It is also used in a single
+ * irq environment as a context to the ISR.
+ */
+struct intr_context {
+	struct qlge_adapter *qdev;
+	u32 intr;
+	u32 irq_mask;		/* Mask of which rings the vector services. */
+	u32 hooked;
+	u32 intr_en_mask;	/* value/mask used to enable this intr */
+	u32 intr_dis_mask;	/* value/mask used to disable this intr */
+	u32 intr_read_mask;	/* value/mask used to read this intr */
+	char name[IFNAMSIZ * 2];
+	irq_handler_t handler;
+};
+
+/* adapter flags definitions. */
+enum {
+	QL_ADAPTER_UP = 0,	/* Adapter has been brought up. */
+	QL_LEGACY_ENABLED = 1,
+	QL_MSI_ENABLED = 2,
+	QL_MSIX_ENABLED = 3,
+	QL_DMA64 = 4,
+	QL_PROMISCUOUS = 5,
+	QL_ALLMULTI = 6,
+	QL_PORT_CFG = 7,
+	QL_CAM_RT_SET = 8,
+	QL_SELFTEST = 9,
+	QL_LB_LINK_UP = 10,
+	QL_FRC_COREDUMP = 11,
+	QL_EEH_FATAL = 12,
+	QL_ASIC_RECOVERY = 14, /* We are in ascic recovery. */
+};
+
+/* link_status bit definitions */
+enum {
+	STS_LOOPBACK_MASK = 0x00000700,
+	STS_LOOPBACK_PCS = 0x00000100,
+	STS_LOOPBACK_HSS = 0x00000200,
+	STS_LOOPBACK_EXT = 0x00000300,
+	STS_PAUSE_MASK = 0x000000c0,
+	STS_PAUSE_STD = 0x00000040,
+	STS_PAUSE_PRI = 0x00000080,
+	STS_SPEED_MASK = 0x00000038,
+	STS_SPEED_100Mb = 0x00000000,
+	STS_SPEED_1Gb = 0x00000008,
+	STS_SPEED_10Gb = 0x00000010,
+	STS_LINK_TYPE_MASK = 0x00000007,
+	STS_LINK_TYPE_XFI = 0x00000001,
+	STS_LINK_TYPE_XAUI = 0x00000002,
+	STS_LINK_TYPE_XFI_BP = 0x00000003,
+	STS_LINK_TYPE_XAUI_BP = 0x00000004,
+	STS_LINK_TYPE_10GBASET = 0x00000005,
+};
+
+/* link_config bit definitions */
+enum {
+	CFG_JUMBO_FRAME_SIZE = 0x00010000,
+	CFG_PAUSE_MASK = 0x00000060,
+	CFG_PAUSE_STD = 0x00000020,
+	CFG_PAUSE_PRI = 0x00000040,
+	CFG_DCBX = 0x00000010,
+	CFG_LOOPBACK_MASK = 0x00000007,
+	CFG_LOOPBACK_PCS = 0x00000002,
+	CFG_LOOPBACK_HSS = 0x00000004,
+	CFG_LOOPBACK_EXT = 0x00000006,
+	CFG_DEFAULT_MAX_FRAME_SIZE = 0x00002580,
+};
+
+struct nic_operations {
+	int (*get_flash)(struct qlge_adapter *qdev);
+	int (*port_initialize)(struct qlge_adapter *qdev);
+};
+
+struct qlge_netdev_priv {
+	struct qlge_adapter *qdev;
+	struct net_device *ndev;
+};
+
+static inline
+struct qlge_adapter *netdev_to_qdev(struct net_device *ndev)
+{
+	struct qlge_netdev_priv *ndev_priv = netdev_priv(ndev);
+
+	return ndev_priv->qdev;
+}
+
+/*
+ * The main Adapter structure definition.
+ * This structure has all fields relevant to the hardware.
+ */
+struct qlge_adapter {
+	struct ricb ricb;
+	unsigned long flags;
+	u32 wol;
+
+	struct nic_stats nic_stats;
+
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+
+	/* PCI Configuration information for this device */
+	struct pci_dev *pdev;
+	struct net_device *ndev;	/* Parent NET device */
+
+	struct devlink_health_reporter *reporter;
+	/* Hardware information */
+	u32 chip_rev_id;
+	u32 fw_rev_id;
+	u32 func;		/* PCI function for this adapter */
+	u32 alt_func;		/* PCI function for alternate adapter */
+	u32 port;		/* Port number this adapter */
+
+	spinlock_t adapter_lock;
+	spinlock_t stats_lock;
+
+	/* PCI Bus Relative Register Addresses */
+	void __iomem *reg_base;
+	void __iomem *doorbell_area;
+	u32 doorbell_area_size;
+
+	u32 msg_enable;
+
+	/* Page for Shadow Registers */
+	void *rx_ring_shadow_reg_area;
+	dma_addr_t rx_ring_shadow_reg_dma;
+	void *tx_ring_shadow_reg_area;
+	dma_addr_t tx_ring_shadow_reg_dma;
+
+	u32 mailbox_in;
+	u32 mailbox_out;
+	struct mbox_params idc_mbc;
+	struct mutex	mpi_mutex;
+
+	int tx_ring_size;
+	int rx_ring_size;
+	u32 intr_count;
+	struct msix_entry *msi_x_entry;
+	struct intr_context intr_context[MAX_RX_RINGS];
+
+	int tx_ring_count;	/* One per online CPU. */
+	u32 rss_ring_count;	/* One per irq vector.  */
+	/*
+	 * rx_ring_count =
+	 *  (CPU count * outbound completion rx_ring) +
+	 *  (irq_vector_cnt * inbound (RSS) completion rx_ring)
+	 */
+	int rx_ring_count;
+	int ring_mem_size;
+	void *ring_mem;
+
+	struct rx_ring rx_ring[MAX_RX_RINGS];
+	struct tx_ring tx_ring[MAX_TX_RINGS];
+	unsigned int lbq_buf_order;
+	u32 lbq_buf_size;
+
+	int rx_csum;
+	u32 default_rx_queue;
+
+	u16 rx_coalesce_usecs;	/* cqicb->int_delay */
+	u16 rx_max_coalesced_frames;	/* cqicb->pkt_int_delay */
+	u16 tx_coalesce_usecs;	/* cqicb->int_delay */
+	u16 tx_max_coalesced_frames;	/* cqicb->pkt_int_delay */
+
+	u32 xg_sem_mask;
+	u32 port_link_up;
+	u32 port_init;
+	u32 link_status;
+	struct qlge_mpi_coredump *mpi_coredump;
+	u32 link_config;
+	u32 led_config;
+	u32 max_frame_size;
+
+	union flash_params flash;
+
+	struct workqueue_struct *workqueue;
+	struct delayed_work asic_reset_work;
+	struct delayed_work mpi_reset_work;
+	struct delayed_work mpi_work;
+	struct delayed_work mpi_port_cfg_work;
+	struct delayed_work mpi_idc_work;
+	struct completion ide_completion;
+	const struct nic_operations *nic_ops;
+	u16 device_id;
+	struct timer_list timer;
+	atomic_t lb_count;
+	/* Keep local copy of current mac address. */
+	char current_mac_addr[ETH_ALEN];
+};
+
+/*
+ * Typical Register accessor for memory mapped device.
+ */
+static inline u32 qlge_read32(const struct qlge_adapter *qdev, int reg)
+{
+	return readl(qdev->reg_base + reg);
+}
+
+/*
+ * Typical Register accessor for memory mapped device.
+ */
+static inline void qlge_write32(const struct qlge_adapter *qdev, int reg, u32 val)
+{
+	writel(val, qdev->reg_base + reg);
+}
+
+/*
+ * Doorbell Registers:
+ * Doorbell registers are virtual registers in the PCI memory space.
+ * The space is allocated by the chip during PCI initialization.  The
+ * device driver finds the doorbell address in BAR 3 in PCI config space.
+ * The registers are used to control outbound and inbound queues. For
+ * example, the producer index for an outbound queue.  Each queue uses
+ * 1 4k chunk of memory.  The lower half of the space is for outbound
+ * queues. The upper half is for inbound queues.
+ */
+static inline void qlge_write_db_reg(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+
+/*
+ * Doorbell Registers:
+ * Doorbell registers are virtual registers in the PCI memory space.
+ * The space is allocated by the chip during PCI initialization.  The
+ * device driver finds the doorbell address in BAR 3 in PCI config space.
+ * The registers are used to control outbound and inbound queues. For
+ * example, the producer index for an outbound queue.  Each queue uses
+ * 1 4k chunk of memory.  The lower half of the space is for outbound
+ * queues. The upper half is for inbound queues.
+ * Caller has to guarantee ordering.
+ */
+static inline void qlge_write_db_reg_relaxed(u32 val, void __iomem *addr)
+{
+	writel_relaxed(val, addr);
+}
+
+/*
+ * Shadow Registers:
+ * Outbound queues have a consumer index that is maintained by the chip.
+ * Inbound queues have a producer index that is maintained by the chip.
+ * For lower overhead, these registers are "shadowed" to host memory
+ * which allows the device driver to track the queue progress without
+ * PCI reads. When an entry is placed on an inbound queue, the chip will
+ * update the relevant index register and then copy the value to the
+ * shadow register in host memory.
+ */
+static inline u32 qlge_read_sh_reg(__le32  *addr)
+{
+	u32 reg;
+
+	reg =  le32_to_cpu(*addr);
+	rmb();
+	return reg;
+}
+
+extern char qlge_driver_name[];
+extern const char qlge_driver_version[];
+extern const struct ethtool_ops qlge_ethtool_ops;
+
+int qlge_sem_spinlock(struct qlge_adapter *qdev, u32 sem_mask);
+void qlge_sem_unlock(struct qlge_adapter *qdev, u32 sem_mask);
+int qlge_read_xgmac_reg(struct qlge_adapter *qdev, u32 reg, u32 *data);
+int qlge_get_mac_addr_reg(struct qlge_adapter *qdev, u32 type, u16 index,
+			  u32 *value);
+int qlge_get_routing_reg(struct qlge_adapter *qdev, u32 index, u32 *value);
+int qlge_write_cfg(struct qlge_adapter *qdev, void *ptr, int size, u32 bit,
+		   u16 q_id);
+void qlge_queue_fw_error(struct qlge_adapter *qdev);
+void qlge_mpi_work(struct work_struct *work);
+void qlge_mpi_reset_work(struct work_struct *work);
+int qlge_wait_reg_rdy(struct qlge_adapter *qdev, u32 reg, u32 bit, u32 ebit);
+void qlge_queue_asic_error(struct qlge_adapter *qdev);
+void qlge_set_ethtool_ops(struct net_device *ndev);
+int qlge_read_xgmac_reg64(struct qlge_adapter *qdev, u32 reg, u64 *data);
+void qlge_mpi_idc_work(struct work_struct *work);
+void qlge_mpi_port_cfg_work(struct work_struct *work);
+int qlge_mb_get_fw_state(struct qlge_adapter *qdev);
+int qlge_cam_route_initialize(struct qlge_adapter *qdev);
+int qlge_read_mpi_reg(struct qlge_adapter *qdev, u32 reg, u32 *data);
+int qlge_write_mpi_reg(struct qlge_adapter *qdev, u32 reg, u32 data);
+int qlge_unpause_mpi_risc(struct qlge_adapter *qdev);
+int qlge_pause_mpi_risc(struct qlge_adapter *qdev);
+int qlge_hard_reset_mpi_risc(struct qlge_adapter *qdev);
+int qlge_soft_reset_mpi_risc(struct qlge_adapter *qdev);
+int qlge_dump_risc_ram_area(struct qlge_adapter *qdev, void *buf, u32 ram_addr,
+			    int word_count);
+int qlge_core_dump(struct qlge_adapter *qdev, struct qlge_mpi_coredump *mpi_coredump);
+int qlge_mb_about_fw(struct qlge_adapter *qdev);
+int qlge_mb_wol_set_magic(struct qlge_adapter *qdev, u32 enable_wol);
+int qlge_mb_wol_mode(struct qlge_adapter *qdev, u32 wol);
+int qlge_mb_set_led_cfg(struct qlge_adapter *qdev, u32 led_config);
+int qlge_mb_get_led_cfg(struct qlge_adapter *qdev);
+void qlge_link_on(struct qlge_adapter *qdev);
+void qlge_link_off(struct qlge_adapter *qdev);
+int qlge_mb_set_mgmnt_traffic_ctl(struct qlge_adapter *qdev, u32 control);
+int qlge_mb_get_port_cfg(struct qlge_adapter *qdev);
+int qlge_mb_set_port_cfg(struct qlge_adapter *qdev);
+int qlge_wait_fifo_empty(struct qlge_adapter *qdev);
+void qlge_get_dump(struct qlge_adapter *qdev, void *buff);
+netdev_tx_t qlge_lb_send(struct sk_buff *skb, struct net_device *ndev);
+void qlge_check_lb_frame(struct qlge_adapter *qdev, struct sk_buff *skb);
+int qlge_own_firmware(struct qlge_adapter *qdev);
+int qlge_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget);
+
+#endif /* _QLGE_H_ */
diff --git a/drivers/staging/qlge/qlge_dbg.c b/drivers/staging/qlge/qlge_dbg.c
new file mode 100644
index 000000000000..5f08a8492da4
--- /dev/null
+++ b/drivers/staging/qlge/qlge_dbg.c
@@ -0,0 +1,1311 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/slab.h>
+
+#include "qlge.h"
+
+/* Read a NIC register from the alternate function. */
+static u32 qlge_read_other_func_reg(struct qlge_adapter *qdev,
+				    u32 reg)
+{
+	u32 register_to_read;
+	u32 reg_val;
+	unsigned int status = 0;
+
+	register_to_read = MPI_NIC_REG_BLOCK
+				| MPI_NIC_READ
+				| (qdev->alt_func << MPI_NIC_FUNCTION_SHIFT)
+				| reg;
+	status = qlge_read_mpi_reg(qdev, register_to_read, &reg_val);
+	if (status != 0)
+		return 0xffffffff;
+
+	return reg_val;
+}
+
+/* Write a NIC register from the alternate function. */
+static int qlge_write_other_func_reg(struct qlge_adapter *qdev,
+				     u32 reg, u32 reg_val)
+{
+	u32 register_to_read;
+
+	register_to_read = MPI_NIC_REG_BLOCK
+				| MPI_NIC_READ
+				| (qdev->alt_func << MPI_NIC_FUNCTION_SHIFT)
+				| reg;
+
+	return qlge_write_mpi_reg(qdev, register_to_read, reg_val);
+}
+
+static int qlge_wait_other_func_reg_rdy(struct qlge_adapter *qdev, u32 reg,
+					u32 bit, u32 err_bit)
+{
+	u32 temp;
+	int count;
+
+	for (count = 10; count; count--) {
+		temp = qlge_read_other_func_reg(qdev, reg);
+
+		/* check for errors */
+		if (temp & err_bit)
+			return -1;
+		else if (temp & bit)
+			return 0;
+		mdelay(10);
+	}
+	return -1;
+}
+
+static int qlge_read_other_func_serdes_reg(struct qlge_adapter *qdev, u32 reg,
+					   u32 *data)
+{
+	int status;
+
+	/* wait for reg to come ready */
+	status = qlge_wait_other_func_reg_rdy(qdev, XG_SERDES_ADDR / 4,
+					      XG_SERDES_ADDR_RDY, 0);
+	if (status)
+		goto exit;
+
+	/* set up for reg read */
+	qlge_write_other_func_reg(qdev, XG_SERDES_ADDR / 4, reg | PROC_ADDR_R);
+
+	/* wait for reg to come ready */
+	status = qlge_wait_other_func_reg_rdy(qdev, XG_SERDES_ADDR / 4,
+					      XG_SERDES_ADDR_RDY, 0);
+	if (status)
+		goto exit;
+
+	/* get the data */
+	*data = qlge_read_other_func_reg(qdev, (XG_SERDES_DATA / 4));
+exit:
+	return status;
+}
+
+/* Read out the SERDES registers */
+static int qlge_read_serdes_reg(struct qlge_adapter *qdev, u32 reg, u32 *data)
+{
+	int status;
+
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev, XG_SERDES_ADDR, XG_SERDES_ADDR_RDY, 0);
+	if (status)
+		goto exit;
+
+	/* set up for reg read */
+	qlge_write32(qdev, XG_SERDES_ADDR, reg | PROC_ADDR_R);
+
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev, XG_SERDES_ADDR, XG_SERDES_ADDR_RDY, 0);
+	if (status)
+		goto exit;
+
+	/* get the data */
+	*data = qlge_read32(qdev, XG_SERDES_DATA);
+exit:
+	return status;
+}
+
+static void qlge_get_both_serdes(struct qlge_adapter *qdev, u32 addr,
+				 u32 *direct_ptr, u32 *indirect_ptr,
+				 bool direct_valid, bool indirect_valid)
+{
+	unsigned int status;
+
+	status = 1;
+	if (direct_valid)
+		status = qlge_read_serdes_reg(qdev, addr, direct_ptr);
+	/* Dead fill any failures or invalids. */
+	if (status)
+		*direct_ptr = 0xDEADBEEF;
+
+	status = 1;
+	if (indirect_valid)
+		status = qlge_read_other_func_serdes_reg(qdev, addr,
+							 indirect_ptr);
+	/* Dead fill any failures or invalids. */
+	if (status)
+		*indirect_ptr = 0xDEADBEEF;
+}
+
+static int qlge_get_serdes_regs(struct qlge_adapter *qdev,
+				struct qlge_mpi_coredump *mpi_coredump)
+{
+	int status;
+	bool xfi_direct_valid = false, xfi_indirect_valid = false;
+	bool xaui_direct_valid = true, xaui_indirect_valid = true;
+	unsigned int i;
+	u32 *direct_ptr, temp;
+	u32 *indirect_ptr;
+
+	/* The XAUI needs to be read out per port */
+	status = qlge_read_other_func_serdes_reg(qdev,
+						 XG_SERDES_XAUI_HSS_PCS_START,
+						 &temp);
+	if (status)
+		temp = XG_SERDES_ADDR_XAUI_PWR_DOWN;
+
+	if ((temp & XG_SERDES_ADDR_XAUI_PWR_DOWN) ==
+				XG_SERDES_ADDR_XAUI_PWR_DOWN)
+		xaui_indirect_valid = false;
+
+	status = qlge_read_serdes_reg(qdev, XG_SERDES_XAUI_HSS_PCS_START, &temp);
+
+	if (status)
+		temp = XG_SERDES_ADDR_XAUI_PWR_DOWN;
+
+	if ((temp & XG_SERDES_ADDR_XAUI_PWR_DOWN) ==
+				XG_SERDES_ADDR_XAUI_PWR_DOWN)
+		xaui_direct_valid = false;
+
+	/*
+	 * XFI register is shared so only need to read one
+	 * functions and then check the bits.
+	 */
+	status = qlge_read_serdes_reg(qdev, XG_SERDES_ADDR_STS, &temp);
+	if (status)
+		temp = 0;
+
+	if ((temp & XG_SERDES_ADDR_XFI1_PWR_UP) ==
+					XG_SERDES_ADDR_XFI1_PWR_UP) {
+		/* now see if i'm NIC 1 or NIC 2 */
+		if (qdev->func & 1)
+			/* I'm NIC 2, so the indirect (NIC1) xfi is up. */
+			xfi_indirect_valid = true;
+		else
+			xfi_direct_valid = true;
+	}
+	if ((temp & XG_SERDES_ADDR_XFI2_PWR_UP) ==
+					XG_SERDES_ADDR_XFI2_PWR_UP) {
+		/* now see if i'm NIC 1 or NIC 2 */
+		if (qdev->func & 1)
+			/* I'm NIC 2, so the indirect (NIC1) xfi is up. */
+			xfi_direct_valid = true;
+		else
+			xfi_indirect_valid = true;
+	}
+
+	/* Get XAUI_AN register block. */
+	if (qdev->func & 1) {
+		/* Function 2 is direct	*/
+		direct_ptr = mpi_coredump->serdes2_xaui_an;
+		indirect_ptr = mpi_coredump->serdes_xaui_an;
+	} else {
+		/* Function 1 is direct	*/
+		direct_ptr = mpi_coredump->serdes_xaui_an;
+		indirect_ptr = mpi_coredump->serdes2_xaui_an;
+	}
+
+	for (i = 0; i <= 0x000000034; i += 4, direct_ptr++, indirect_ptr++)
+		qlge_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+				     xaui_direct_valid, xaui_indirect_valid);
+
+	/* Get XAUI_HSS_PCS register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xaui_hss_pcs;
+		indirect_ptr =
+			mpi_coredump->serdes_xaui_hss_pcs;
+	} else {
+		direct_ptr =
+			mpi_coredump->serdes_xaui_hss_pcs;
+		indirect_ptr =
+			mpi_coredump->serdes2_xaui_hss_pcs;
+	}
+
+	for (i = 0x800; i <= 0x880; i += 4, direct_ptr++, indirect_ptr++)
+		qlge_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+				     xaui_direct_valid, xaui_indirect_valid);
+
+	/* Get XAUI_XFI_AN register block. */
+	if (qdev->func & 1) {
+		direct_ptr = mpi_coredump->serdes2_xfi_an;
+		indirect_ptr = mpi_coredump->serdes_xfi_an;
+	} else {
+		direct_ptr = mpi_coredump->serdes_xfi_an;
+		indirect_ptr = mpi_coredump->serdes2_xfi_an;
+	}
+
+	for (i = 0x1000; i <= 0x1034; i += 4, direct_ptr++, indirect_ptr++)
+		qlge_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+				     xfi_direct_valid, xfi_indirect_valid);
+
+	/* Get XAUI_XFI_TRAIN register block. */
+	if (qdev->func & 1) {
+		direct_ptr = mpi_coredump->serdes2_xfi_train;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_train;
+	} else {
+		direct_ptr = mpi_coredump->serdes_xfi_train;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_train;
+	}
+
+	for (i = 0x1050; i <= 0x107c; i += 4, direct_ptr++, indirect_ptr++)
+		qlge_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+				     xfi_direct_valid, xfi_indirect_valid);
+
+	/* Get XAUI_XFI_HSS_PCS register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xfi_hss_pcs;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_hss_pcs;
+	} else {
+		direct_ptr =
+			mpi_coredump->serdes_xfi_hss_pcs;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_hss_pcs;
+	}
+
+	for (i = 0x1800; i <= 0x1838; i += 4, direct_ptr++, indirect_ptr++)
+		qlge_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+				     xfi_direct_valid, xfi_indirect_valid);
+
+	/* Get XAUI_XFI_HSS_TX register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xfi_hss_tx;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_hss_tx;
+	} else {
+		direct_ptr = mpi_coredump->serdes_xfi_hss_tx;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_hss_tx;
+	}
+	for (i = 0x1c00; i <= 0x1c1f; i++, direct_ptr++, indirect_ptr++)
+		qlge_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+				     xfi_direct_valid, xfi_indirect_valid);
+
+	/* Get XAUI_XFI_HSS_RX register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xfi_hss_rx;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_hss_rx;
+	} else {
+		direct_ptr = mpi_coredump->serdes_xfi_hss_rx;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_hss_rx;
+	}
+
+	for (i = 0x1c40; i <= 0x1c5f; i++, direct_ptr++, indirect_ptr++)
+		qlge_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+				     xfi_direct_valid, xfi_indirect_valid);
+
+	/* Get XAUI_XFI_HSS_PLL register block. */
+	if (qdev->func & 1) {
+		direct_ptr =
+			mpi_coredump->serdes2_xfi_hss_pll;
+		indirect_ptr =
+			mpi_coredump->serdes_xfi_hss_pll;
+	} else {
+		direct_ptr =
+			mpi_coredump->serdes_xfi_hss_pll;
+		indirect_ptr =
+			mpi_coredump->serdes2_xfi_hss_pll;
+	}
+	for (i = 0x1e00; i <= 0x1e1f; i++, direct_ptr++, indirect_ptr++)
+		qlge_get_both_serdes(qdev, i, direct_ptr, indirect_ptr,
+				     xfi_direct_valid, xfi_indirect_valid);
+	return 0;
+}
+
+static int qlge_read_other_func_xgmac_reg(struct qlge_adapter *qdev, u32 reg,
+					  u32 *data)
+{
+	int status = 0;
+
+	/* wait for reg to come ready */
+	status = qlge_wait_other_func_reg_rdy(qdev, XGMAC_ADDR / 4,
+					      XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
+	if (status)
+		goto exit;
+
+	/* set up for reg read */
+	qlge_write_other_func_reg(qdev, XGMAC_ADDR / 4, reg | XGMAC_ADDR_R);
+
+	/* wait for reg to come ready */
+	status = qlge_wait_other_func_reg_rdy(qdev, XGMAC_ADDR / 4,
+					      XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
+	if (status)
+		goto exit;
+
+	/* get the data */
+	*data = qlge_read_other_func_reg(qdev, XGMAC_DATA / 4);
+exit:
+	return status;
+}
+
+/* Read the 400 xgmac control/statistics registers
+ * skipping unused locations.
+ */
+static int qlge_get_xgmac_regs(struct qlge_adapter *qdev, u32 *buf,
+			       unsigned int other_function)
+{
+	int status = 0;
+	int i;
+
+	for (i = PAUSE_SRC_LO; i < XGMAC_REGISTER_END; i += 4, buf++) {
+		/* We're reading 400 xgmac registers, but we filter out
+		 * several locations that are non-responsive to reads.
+		 */
+		if ((i == 0x00000114) || (i == 0x00000118) ||
+		    (i == 0x0000013c) || (i == 0x00000140) ||
+		    (i > 0x00000150 && i < 0x000001fc) ||
+		    (i > 0x00000278 && i < 0x000002a0) ||
+		    (i > 0x000002c0 && i < 0x000002cf) ||
+		    (i > 0x000002dc && i < 0x000002f0) ||
+		    (i > 0x000003c8 && i < 0x00000400) ||
+		    (i > 0x00000400 && i < 0x00000410) ||
+		    (i > 0x00000410 && i < 0x00000420) ||
+		    (i > 0x00000420 && i < 0x00000430) ||
+		    (i > 0x00000430 && i < 0x00000440) ||
+		    (i > 0x00000440 && i < 0x00000450) ||
+		    (i > 0x00000450 && i < 0x00000500) ||
+		    (i > 0x0000054c && i < 0x00000568) ||
+		    (i > 0x000005c8 && i < 0x00000600)) {
+			if (other_function)
+				status = qlge_read_other_func_xgmac_reg(qdev, i, buf);
+			else
+				status = qlge_read_xgmac_reg(qdev, i, buf);
+
+			if (status)
+				*buf = 0xdeadbeef;
+			break;
+		}
+	}
+	return status;
+}
+
+static int qlge_get_ets_regs(struct qlge_adapter *qdev, u32 *buf)
+{
+	int i;
+
+	for (i = 0; i < 8; i++, buf++) {
+		qlge_write32(qdev, NIC_ETS, i << 29 | 0x08000000);
+		*buf = qlge_read32(qdev, NIC_ETS);
+	}
+
+	for (i = 0; i < 2; i++, buf++) {
+		qlge_write32(qdev, CNA_ETS, i << 29 | 0x08000000);
+		*buf = qlge_read32(qdev, CNA_ETS);
+	}
+
+	return 0;
+}
+
+static void qlge_get_intr_states(struct qlge_adapter *qdev, u32 *buf)
+{
+	int i;
+
+	for (i = 0; i < qdev->rx_ring_count; i++, buf++) {
+		qlge_write32(qdev, INTR_EN,
+			     qdev->intr_context[i].intr_read_mask);
+		*buf = qlge_read32(qdev, INTR_EN);
+	}
+}
+
+static int qlge_get_cam_entries(struct qlge_adapter *qdev, u32 *buf)
+{
+	int i, status;
+	u32 value[3];
+
+	status = qlge_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+
+	for (i = 0; i < 16; i++) {
+		status = qlge_get_mac_addr_reg(qdev,
+					       MAC_ADDR_TYPE_CAM_MAC, i, value);
+		if (status) {
+			netif_err(qdev, drv, qdev->ndev,
+				  "Failed read of mac index register\n");
+			goto err;
+		}
+		*buf++ = value[0];	/* lower MAC address */
+		*buf++ = value[1];	/* upper MAC address */
+		*buf++ = value[2];	/* output */
+	}
+	for (i = 0; i < 32; i++) {
+		status = qlge_get_mac_addr_reg(qdev, MAC_ADDR_TYPE_MULTI_MAC,
+					       i, value);
+		if (status) {
+			netif_err(qdev, drv, qdev->ndev,
+				  "Failed read of mac index register\n");
+			goto err;
+		}
+		*buf++ = value[0];	/* lower Mcast address */
+		*buf++ = value[1];	/* upper Mcast address */
+	}
+err:
+	qlge_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	return status;
+}
+
+static int qlge_get_routing_entries(struct qlge_adapter *qdev, u32 *buf)
+{
+	int status;
+	u32 value, i;
+
+	status = qlge_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+
+	for (i = 0; i < 16; i++) {
+		status = qlge_get_routing_reg(qdev, i, &value);
+		if (status) {
+			netif_err(qdev, drv, qdev->ndev,
+				  "Failed read of routing index register\n");
+			goto err;
+		} else {
+			*buf++ = value;
+		}
+	}
+err:
+	qlge_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
+/* Read the MPI Processor shadow registers */
+static int qlge_get_mpi_shadow_regs(struct qlge_adapter *qdev, u32 *buf)
+{
+	u32 i;
+	int status;
+
+	for (i = 0; i < MPI_CORE_SH_REGS_CNT; i++, buf++) {
+		status = qlge_write_mpi_reg(qdev,
+					    RISC_124,
+					    (SHADOW_OFFSET | i << SHADOW_REG_SHIFT));
+		if (status)
+			goto end;
+		status = qlge_read_mpi_reg(qdev, RISC_127, buf);
+		if (status)
+			goto end;
+	}
+end:
+	return status;
+}
+
+/* Read the MPI Processor core registers */
+static int qlge_get_mpi_regs(struct qlge_adapter *qdev, u32 *buf,
+			     u32 offset, u32 count)
+{
+	int i, status = 0;
+
+	for (i = 0; i < count; i++, buf++) {
+		status = qlge_read_mpi_reg(qdev, offset + i, buf);
+		if (status)
+			return status;
+	}
+	return status;
+}
+
+/* Read the ASIC probe dump */
+static unsigned int *qlge_get_probe(struct qlge_adapter *qdev, u32 clock,
+				    u32 valid, u32 *buf)
+{
+	u32 module, mux_sel, probe, lo_val, hi_val;
+
+	for (module = 0; module < PRB_MX_ADDR_MAX_MODS; module++) {
+		if (!((valid >> module) & 1))
+			continue;
+		for (mux_sel = 0; mux_sel < PRB_MX_ADDR_MAX_MUX; mux_sel++) {
+			probe = clock
+				| PRB_MX_ADDR_ARE
+				| mux_sel
+				| (module << PRB_MX_ADDR_MOD_SEL_SHIFT);
+			qlge_write32(qdev, PRB_MX_ADDR, probe);
+			lo_val = qlge_read32(qdev, PRB_MX_DATA);
+			if (mux_sel == 0) {
+				*buf = probe;
+				buf++;
+			}
+			probe |= PRB_MX_ADDR_UP;
+			qlge_write32(qdev, PRB_MX_ADDR, probe);
+			hi_val = qlge_read32(qdev, PRB_MX_DATA);
+			*buf = lo_val;
+			buf++;
+			*buf = hi_val;
+			buf++;
+		}
+	}
+	return buf;
+}
+
+static int qlge_get_probe_dump(struct qlge_adapter *qdev, unsigned int *buf)
+{
+	/* First we have to enable the probe mux */
+	qlge_write_mpi_reg(qdev, MPI_TEST_FUNC_PRB_CTL, MPI_TEST_FUNC_PRB_EN);
+	buf = qlge_get_probe(qdev, PRB_MX_ADDR_SYS_CLOCK,
+			     PRB_MX_ADDR_VALID_SYS_MOD, buf);
+	buf = qlge_get_probe(qdev, PRB_MX_ADDR_PCI_CLOCK,
+			     PRB_MX_ADDR_VALID_PCI_MOD, buf);
+	buf = qlge_get_probe(qdev, PRB_MX_ADDR_XGM_CLOCK,
+			     PRB_MX_ADDR_VALID_XGM_MOD, buf);
+	buf = qlge_get_probe(qdev, PRB_MX_ADDR_FC_CLOCK,
+			     PRB_MX_ADDR_VALID_FC_MOD, buf);
+	return 0;
+}
+
+/* Read out the routing index registers */
+static int qlge_get_routing_index_registers(struct qlge_adapter *qdev, u32 *buf)
+{
+	int status;
+	u32 type, index, index_max;
+	u32 result_index;
+	u32 result_data;
+	u32 val;
+
+	status = qlge_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+
+	for (type = 0; type < 4; type++) {
+		if (type < 2)
+			index_max = 8;
+		else
+			index_max = 16;
+		for (index = 0; index < index_max; index++) {
+			val = RT_IDX_RS
+				| (type << RT_IDX_TYPE_SHIFT)
+				| (index << RT_IDX_IDX_SHIFT);
+			qlge_write32(qdev, RT_IDX, val);
+			result_index = 0;
+			while ((result_index & RT_IDX_MR) == 0)
+				result_index = qlge_read32(qdev, RT_IDX);
+			result_data = qlge_read32(qdev, RT_DATA);
+			*buf = type;
+			buf++;
+			*buf = index;
+			buf++;
+			*buf = result_index;
+			buf++;
+			*buf = result_data;
+			buf++;
+		}
+	}
+	qlge_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
+/* Read out the MAC protocol registers */
+static void qlge_get_mac_protocol_registers(struct qlge_adapter *qdev, u32 *buf)
+{
+	u32 result_index, result_data;
+	u32 type;
+	u32 index;
+	u32 offset;
+	u32 val;
+	u32 initial_val = MAC_ADDR_RS;
+	u32 max_index;
+	u32 max_offset;
+
+	for (type = 0; type < MAC_ADDR_TYPE_COUNT; type++) {
+		switch (type) {
+		case 0: /* CAM */
+			initial_val |= MAC_ADDR_ADR;
+			max_index = MAC_ADDR_MAX_CAM_ENTRIES;
+			max_offset = MAC_ADDR_MAX_CAM_WCOUNT;
+			break;
+		case 1: /* Multicast MAC Address */
+			max_index = MAC_ADDR_MAX_CAM_WCOUNT;
+			max_offset = MAC_ADDR_MAX_CAM_WCOUNT;
+			break;
+		case 2: /* VLAN filter mask */
+		case 3: /* MC filter mask */
+			max_index = MAC_ADDR_MAX_CAM_WCOUNT;
+			max_offset = MAC_ADDR_MAX_CAM_WCOUNT;
+			break;
+		case 4: /* FC MAC addresses */
+			max_index = MAC_ADDR_MAX_FC_MAC_ENTRIES;
+			max_offset = MAC_ADDR_MAX_FC_MAC_WCOUNT;
+			break;
+		case 5: /* Mgmt MAC addresses */
+			max_index = MAC_ADDR_MAX_MGMT_MAC_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_MAC_WCOUNT;
+			break;
+		case 6: /* Mgmt VLAN addresses */
+			max_index = MAC_ADDR_MAX_MGMT_VLAN_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_VLAN_WCOUNT;
+			break;
+		case 7: /* Mgmt IPv4 address */
+			max_index = MAC_ADDR_MAX_MGMT_V4_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_V4_WCOUNT;
+			break;
+		case 8: /* Mgmt IPv6 address */
+			max_index = MAC_ADDR_MAX_MGMT_V6_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_V6_WCOUNT;
+			break;
+		case 9: /* Mgmt TCP/UDP Dest port */
+			max_index = MAC_ADDR_MAX_MGMT_TU_DP_ENTRIES;
+			max_offset = MAC_ADDR_MAX_MGMT_TU_DP_WCOUNT;
+			break;
+		default:
+			netdev_err(qdev->ndev, "Bad type!!! 0x%08x\n", type);
+			max_index = 0;
+			max_offset = 0;
+			break;
+		}
+		for (index = 0; index < max_index; index++) {
+			for (offset = 0; offset < max_offset; offset++) {
+				val = initial_val
+					| (type << MAC_ADDR_TYPE_SHIFT)
+					| (index << MAC_ADDR_IDX_SHIFT)
+					| (offset);
+				qlge_write32(qdev, MAC_ADDR_IDX, val);
+				result_index = 0;
+				while ((result_index & MAC_ADDR_MR) == 0) {
+					result_index = qlge_read32(qdev,
+								   MAC_ADDR_IDX);
+				}
+				result_data = qlge_read32(qdev, MAC_ADDR_DATA);
+				*buf = result_index;
+				buf++;
+				*buf = result_data;
+				buf++;
+			}
+		}
+	}
+}
+
+static void qlge_get_sem_registers(struct qlge_adapter *qdev, u32 *buf)
+{
+	u32 func_num, reg, reg_val;
+	int status;
+
+	for (func_num = 0; func_num < MAX_SEMAPHORE_FUNCTIONS ; func_num++) {
+		reg = MPI_NIC_REG_BLOCK
+			| (func_num << MPI_NIC_FUNCTION_SHIFT)
+			| (SEM / 4);
+		status = qlge_read_mpi_reg(qdev, reg, &reg_val);
+		*buf = reg_val;
+		/* if the read failed then dead fill the element. */
+		if (!status)
+			*buf = 0xdeadbeef;
+		buf++;
+	}
+}
+
+/* Create a coredump segment header */
+static void qlge_build_coredump_seg_header(struct mpi_coredump_segment_header *seg_hdr,
+					   u32 seg_number, u32 seg_size, u8 *desc)
+{
+	memset(seg_hdr, 0, sizeof(struct mpi_coredump_segment_header));
+	seg_hdr->cookie = MPI_COREDUMP_COOKIE;
+	seg_hdr->seg_num = seg_number;
+	seg_hdr->seg_size = seg_size;
+	strscpy(seg_hdr->description, desc, sizeof(seg_hdr->description));
+}
+
+/*
+ * This function should be called when a coredump / probedump
+ * is to be extracted from the HBA. It is assumed there is a
+ * qdev structure that contains the base address of the register
+ * space for this function as well as a coredump structure that
+ * will contain the dump.
+ */
+int qlge_core_dump(struct qlge_adapter *qdev, struct qlge_mpi_coredump *mpi_coredump)
+{
+	int status;
+	int i;
+
+	if (!mpi_coredump) {
+		netif_err(qdev, drv, qdev->ndev, "No memory allocated\n");
+		return -EINVAL;
+	}
+
+	/* Try to get the spinlock, but dont worry if
+	 * it isn't available.  If the firmware died it
+	 * might be holding the sem.
+	 */
+	qlge_sem_spinlock(qdev, SEM_PROC_REG_MASK);
+
+	status = qlge_pause_mpi_risc(qdev);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed RISC pause. Status = 0x%.08x\n", status);
+		goto err;
+	}
+
+	/* Insert the global header */
+	memset(&mpi_coredump->mpi_global_header, 0,
+	       sizeof(struct mpi_coredump_global_header));
+	mpi_coredump->mpi_global_header.cookie = MPI_COREDUMP_COOKIE;
+	mpi_coredump->mpi_global_header.header_size =
+		sizeof(struct mpi_coredump_global_header);
+	mpi_coredump->mpi_global_header.image_size =
+		sizeof(struct qlge_mpi_coredump);
+	strscpy(mpi_coredump->mpi_global_header.id_string, "MPI Coredump",
+		sizeof(mpi_coredump->mpi_global_header.id_string));
+
+	/* Get generic NIC reg dump */
+	qlge_build_coredump_seg_header(&mpi_coredump->nic_regs_seg_hdr,
+				       NIC1_CONTROL_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->nic_regs), "NIC1 Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->nic2_regs_seg_hdr,
+				       NIC2_CONTROL_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->nic2_regs), "NIC2 Registers");
+
+	/* Get XGMac registers. (Segment 18, Rev C. step 21) */
+	qlge_build_coredump_seg_header(&mpi_coredump->xgmac1_seg_hdr,
+				       NIC1_XGMAC_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->xgmac1), "NIC1 XGMac Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xgmac2_seg_hdr,
+				       NIC2_XGMAC_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->xgmac2), "NIC2 XGMac Registers");
+
+	if (qdev->func & 1) {
+		/* Odd means our function is NIC 2 */
+		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
+			mpi_coredump->nic2_regs[i] =
+				qlge_read32(qdev, i * sizeof(u32));
+
+		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
+			mpi_coredump->nic_regs[i] =
+				qlge_read_other_func_reg(qdev, (i * sizeof(u32)) / 4);
+
+		qlge_get_xgmac_regs(qdev, &mpi_coredump->xgmac2[0], 0);
+		qlge_get_xgmac_regs(qdev, &mpi_coredump->xgmac1[0], 1);
+	} else {
+		/* Even means our function is NIC 1 */
+		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
+			mpi_coredump->nic_regs[i] =
+				qlge_read32(qdev, i * sizeof(u32));
+		for (i = 0; i < NIC_REGS_DUMP_WORD_COUNT; i++)
+			mpi_coredump->nic2_regs[i] =
+				qlge_read_other_func_reg(qdev, (i * sizeof(u32)) / 4);
+
+		qlge_get_xgmac_regs(qdev, &mpi_coredump->xgmac1[0], 0);
+		qlge_get_xgmac_regs(qdev, &mpi_coredump->xgmac2[0], 1);
+	}
+
+	/* Rev C. Step 20a */
+	qlge_build_coredump_seg_header(&mpi_coredump->xaui_an_hdr,
+				       XAUI_AN_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes_xaui_an),
+				       "XAUI AN Registers");
+
+	/* Rev C. Step 20b */
+	qlge_build_coredump_seg_header(&mpi_coredump->xaui_hss_pcs_hdr,
+				       XAUI_HSS_PCS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes_xaui_hss_pcs),
+				       "XAUI HSS PCS Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi_an_hdr, XFI_AN_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes_xfi_an),
+				       "XFI AN Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi_train_hdr,
+				       XFI_TRAIN_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes_xfi_train),
+				       "XFI TRAIN Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi_hss_pcs_hdr,
+				       XFI_HSS_PCS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes_xfi_hss_pcs),
+				       "XFI HSS PCS Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi_hss_tx_hdr,
+				       XFI_HSS_TX_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes_xfi_hss_tx),
+				       "XFI HSS TX Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi_hss_rx_hdr,
+				       XFI_HSS_RX_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes_xfi_hss_rx),
+				       "XFI HSS RX Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi_hss_pll_hdr,
+				       XFI_HSS_PLL_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes_xfi_hss_pll),
+				       "XFI HSS PLL Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xaui2_an_hdr,
+				       XAUI2_AN_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes2_xaui_an),
+				       "XAUI2 AN Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xaui2_hss_pcs_hdr,
+				       XAUI2_HSS_PCS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes2_xaui_hss_pcs),
+				       "XAUI2 HSS PCS Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi2_an_hdr,
+				       XFI2_AN_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes2_xfi_an),
+				       "XFI2 AN Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi2_train_hdr,
+				       XFI2_TRAIN_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes2_xfi_train),
+				       "XFI2 TRAIN Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi2_hss_pcs_hdr,
+				       XFI2_HSS_PCS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes2_xfi_hss_pcs),
+				       "XFI2 HSS PCS Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi2_hss_tx_hdr,
+				       XFI2_HSS_TX_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes2_xfi_hss_tx),
+				       "XFI2 HSS TX Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi2_hss_rx_hdr,
+				       XFI2_HSS_RX_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes2_xfi_hss_rx),
+				       "XFI2 HSS RX Registers");
+
+	qlge_build_coredump_seg_header(&mpi_coredump->xfi2_hss_pll_hdr,
+				       XFI2_HSS_PLL_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->serdes2_xfi_hss_pll),
+				       "XFI2 HSS PLL Registers");
+
+	status = qlge_get_serdes_regs(qdev, mpi_coredump);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Dump of Serdes Registers. Status = 0x%.08x\n",
+			  status);
+		goto err;
+	}
+
+	qlge_build_coredump_seg_header(&mpi_coredump->core_regs_seg_hdr,
+				       CORE_SEG_NUM,
+				       sizeof(mpi_coredump->core_regs_seg_hdr) +
+				       sizeof(mpi_coredump->mpi_core_regs) +
+				       sizeof(mpi_coredump->mpi_core_sh_regs),
+				       "Core Registers");
+
+	/* Get the MPI Core Registers */
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->mpi_core_regs[0],
+				   MPI_CORE_REGS_ADDR, MPI_CORE_REGS_CNT);
+	if (status)
+		goto err;
+	/* Get the 16 MPI shadow registers */
+	status = qlge_get_mpi_shadow_regs(qdev,
+					  &mpi_coredump->mpi_core_sh_regs[0]);
+	if (status)
+		goto err;
+
+	/* Get the Test Logic Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->test_logic_regs_seg_hdr,
+				       TEST_LOGIC_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->test_logic_regs),
+				       "Test Logic Regs");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->test_logic_regs[0],
+				   TEST_REGS_ADDR, TEST_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the RMII Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->rmii_regs_seg_hdr,
+				       RMII_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->rmii_regs),
+				       "RMII Registers");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->rmii_regs[0],
+				   RMII_REGS_ADDR, RMII_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the FCMAC1 Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->fcmac1_regs_seg_hdr,
+				       FCMAC1_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->fcmac1_regs),
+				       "FCMAC1 Registers");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->fcmac1_regs[0],
+				   FCMAC1_REGS_ADDR, FCMAC_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the FCMAC2 Registers */
+
+	qlge_build_coredump_seg_header(&mpi_coredump->fcmac2_regs_seg_hdr,
+				       FCMAC2_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->fcmac2_regs),
+				       "FCMAC2 Registers");
+
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->fcmac2_regs[0],
+				   FCMAC2_REGS_ADDR, FCMAC_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the FC1 MBX Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->fc1_mbx_regs_seg_hdr,
+				       FC1_MBOX_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->fc1_mbx_regs),
+				       "FC1 MBox Regs");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->fc1_mbx_regs[0],
+				   FC1_MBX_REGS_ADDR, FC_MBX_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the IDE Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->ide_regs_seg_hdr,
+				       IDE_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->ide_regs),
+				       "IDE Registers");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->ide_regs[0],
+				   IDE_REGS_ADDR, IDE_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the NIC1 MBX Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->nic1_mbx_regs_seg_hdr,
+				       NIC1_MBOX_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->nic1_mbx_regs),
+				       "NIC1 MBox Regs");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->nic1_mbx_regs[0],
+				   NIC1_MBX_REGS_ADDR, NIC_MBX_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the SMBus Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->smbus_regs_seg_hdr,
+				       SMBUS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->smbus_regs),
+				       "SMBus Registers");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->smbus_regs[0],
+				   SMBUS_REGS_ADDR, SMBUS_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the FC2 MBX Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->fc2_mbx_regs_seg_hdr,
+				       FC2_MBOX_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->fc2_mbx_regs),
+				       "FC2 MBox Regs");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->fc2_mbx_regs[0],
+				   FC2_MBX_REGS_ADDR, FC_MBX_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the NIC2 MBX Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->nic2_mbx_regs_seg_hdr,
+				       NIC2_MBOX_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->nic2_mbx_regs),
+				       "NIC2 MBox Regs");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->nic2_mbx_regs[0],
+				   NIC2_MBX_REGS_ADDR, NIC_MBX_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the I2C Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->i2c_regs_seg_hdr,
+				       I2C_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->i2c_regs),
+				       "I2C Registers");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->i2c_regs[0],
+				   I2C_REGS_ADDR, I2C_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the MEMC Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->memc_regs_seg_hdr,
+				       MEMC_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->memc_regs),
+				       "MEMC Registers");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->memc_regs[0],
+				   MEMC_REGS_ADDR, MEMC_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the PBus Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->pbus_regs_seg_hdr,
+				       PBUS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->pbus_regs),
+				       "PBUS Registers");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->pbus_regs[0],
+				   PBUS_REGS_ADDR, PBUS_REGS_CNT);
+	if (status)
+		goto err;
+
+	/* Get the MDE Registers */
+	qlge_build_coredump_seg_header(&mpi_coredump->mde_regs_seg_hdr,
+				       MDE_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->mde_regs),
+				       "MDE Registers");
+	status = qlge_get_mpi_regs(qdev, &mpi_coredump->mde_regs[0],
+				   MDE_REGS_ADDR, MDE_REGS_CNT);
+	if (status)
+		goto err;
+
+	qlge_build_coredump_seg_header(&mpi_coredump->misc_nic_seg_hdr,
+				       MISC_NIC_INFO_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->misc_nic_info),
+				       "MISC NIC INFO");
+	mpi_coredump->misc_nic_info.rx_ring_count = qdev->rx_ring_count;
+	mpi_coredump->misc_nic_info.tx_ring_count = qdev->tx_ring_count;
+	mpi_coredump->misc_nic_info.intr_count = qdev->intr_count;
+	mpi_coredump->misc_nic_info.function = qdev->func;
+
+	/* Segment 31 */
+	/* Get indexed register values. */
+	qlge_build_coredump_seg_header(&mpi_coredump->intr_states_seg_hdr,
+				       INTR_STATES_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->intr_states),
+				       "INTR States");
+	qlge_get_intr_states(qdev, &mpi_coredump->intr_states[0]);
+
+	qlge_build_coredump_seg_header(&mpi_coredump->cam_entries_seg_hdr,
+				       CAM_ENTRIES_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->cam_entries),
+				       "CAM Entries");
+	status = qlge_get_cam_entries(qdev, &mpi_coredump->cam_entries[0]);
+	if (status)
+		goto err;
+
+	qlge_build_coredump_seg_header(&mpi_coredump->nic_routing_words_seg_hdr,
+				       ROUTING_WORDS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->nic_routing_words),
+				       "Routing Words");
+	status = qlge_get_routing_entries(qdev,
+					  &mpi_coredump->nic_routing_words[0]);
+	if (status)
+		goto err;
+
+	/* Segment 34 (Rev C. step 23) */
+	qlge_build_coredump_seg_header(&mpi_coredump->ets_seg_hdr,
+				       ETS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->ets),
+				       "ETS Registers");
+	status = qlge_get_ets_regs(qdev, &mpi_coredump->ets[0]);
+	if (status)
+		goto err;
+
+	qlge_build_coredump_seg_header(&mpi_coredump->probe_dump_seg_hdr,
+				       PROBE_DUMP_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->probe_dump),
+				       "Probe Dump");
+	qlge_get_probe_dump(qdev, &mpi_coredump->probe_dump[0]);
+
+	qlge_build_coredump_seg_header(&mpi_coredump->routing_reg_seg_hdr,
+				       ROUTING_INDEX_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->routing_regs),
+				       "Routing Regs");
+	status = qlge_get_routing_index_registers(qdev,
+						  &mpi_coredump->routing_regs[0]);
+	if (status)
+		goto err;
+
+	qlge_build_coredump_seg_header(&mpi_coredump->mac_prot_reg_seg_hdr,
+				       MAC_PROTOCOL_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->mac_prot_regs),
+				       "MAC Prot Regs");
+	qlge_get_mac_protocol_registers(qdev, &mpi_coredump->mac_prot_regs[0]);
+
+	/* Get the semaphore registers for all 5 functions */
+	qlge_build_coredump_seg_header(&mpi_coredump->sem_regs_seg_hdr,
+				       SEM_REGS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header) +
+				       sizeof(mpi_coredump->sem_regs),	"Sem Registers");
+
+	qlge_get_sem_registers(qdev, &mpi_coredump->sem_regs[0]);
+
+	/* Prevent the mpi restarting while we dump the memory.*/
+	qlge_write_mpi_reg(qdev, MPI_TEST_FUNC_RST_STS, MPI_TEST_FUNC_RST_FRC);
+
+	/* clear the pause */
+	status = qlge_unpause_mpi_risc(qdev);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed RISC unpause. Status = 0x%.08x\n", status);
+		goto err;
+	}
+
+	/* Reset the RISC so we can dump RAM */
+	status = qlge_hard_reset_mpi_risc(qdev);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed RISC reset. Status = 0x%.08x\n", status);
+		goto err;
+	}
+
+	qlge_build_coredump_seg_header(&mpi_coredump->code_ram_seg_hdr,
+				       WCS_RAM_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->code_ram),
+				       "WCS RAM");
+	status = qlge_dump_risc_ram_area(qdev, &mpi_coredump->code_ram[0],
+					 CODE_RAM_ADDR, CODE_RAM_CNT);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Dump of CODE RAM. Status = 0x%.08x\n",
+			  status);
+		goto err;
+	}
+
+	/* Insert the segment header */
+	qlge_build_coredump_seg_header(&mpi_coredump->memc_ram_seg_hdr,
+				       MEMC_RAM_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->memc_ram),
+				       "MEMC RAM");
+	status = qlge_dump_risc_ram_area(qdev, &mpi_coredump->memc_ram[0],
+					 MEMC_RAM_ADDR, MEMC_RAM_CNT);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Dump of MEMC RAM. Status = 0x%.08x\n",
+			  status);
+		goto err;
+	}
+err:
+	qlge_sem_unlock(qdev, SEM_PROC_REG_MASK); /* does flush too */
+	return status;
+}
+
+static void qlge_get_core_dump(struct qlge_adapter *qdev)
+{
+	if (!qlge_own_firmware(qdev)) {
+		netif_err(qdev, drv, qdev->ndev, "Don't own firmware!\n");
+		return;
+	}
+
+	if (!netif_running(qdev->ndev)) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Force Coredump can only be done from interface that is up\n");
+		return;
+	}
+	qlge_queue_fw_error(qdev);
+}
+
+static void qlge_gen_reg_dump(struct qlge_adapter *qdev,
+			      struct qlge_reg_dump *mpi_coredump)
+{
+	int i, status;
+
+	memset(&mpi_coredump->mpi_global_header, 0,
+	       sizeof(struct mpi_coredump_global_header));
+	mpi_coredump->mpi_global_header.cookie = MPI_COREDUMP_COOKIE;
+	mpi_coredump->mpi_global_header.header_size =
+		sizeof(struct mpi_coredump_global_header);
+	mpi_coredump->mpi_global_header.image_size =
+		sizeof(struct qlge_reg_dump);
+	strscpy(mpi_coredump->mpi_global_header.id_string, "MPI Coredump",
+		sizeof(mpi_coredump->mpi_global_header.id_string));
+
+	/* segment 16 */
+	qlge_build_coredump_seg_header(&mpi_coredump->misc_nic_seg_hdr,
+				       MISC_NIC_INFO_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->misc_nic_info),
+				       "MISC NIC INFO");
+	mpi_coredump->misc_nic_info.rx_ring_count = qdev->rx_ring_count;
+	mpi_coredump->misc_nic_info.tx_ring_count = qdev->tx_ring_count;
+	mpi_coredump->misc_nic_info.intr_count = qdev->intr_count;
+	mpi_coredump->misc_nic_info.function = qdev->func;
+
+	/* Segment 16, Rev C. Step 18 */
+	qlge_build_coredump_seg_header(&mpi_coredump->nic_regs_seg_hdr,
+				       NIC1_CONTROL_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->nic_regs),
+				       "NIC Registers");
+	/* Get generic reg dump */
+	for (i = 0; i < 64; i++)
+		mpi_coredump->nic_regs[i] = qlge_read32(qdev, i * sizeof(u32));
+
+	/* Segment 31 */
+	/* Get indexed register values. */
+	qlge_build_coredump_seg_header(&mpi_coredump->intr_states_seg_hdr,
+				       INTR_STATES_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->intr_states),
+				       "INTR States");
+	qlge_get_intr_states(qdev, &mpi_coredump->intr_states[0]);
+
+	qlge_build_coredump_seg_header(&mpi_coredump->cam_entries_seg_hdr,
+				       CAM_ENTRIES_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->cam_entries),
+				       "CAM Entries");
+	status = qlge_get_cam_entries(qdev, &mpi_coredump->cam_entries[0]);
+	if (status)
+		return;
+
+	qlge_build_coredump_seg_header(&mpi_coredump->nic_routing_words_seg_hdr,
+				       ROUTING_WORDS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->nic_routing_words),
+				       "Routing Words");
+	status = qlge_get_routing_entries(qdev,
+					  &mpi_coredump->nic_routing_words[0]);
+	if (status)
+		return;
+
+	/* Segment 34 (Rev C. step 23) */
+	qlge_build_coredump_seg_header(&mpi_coredump->ets_seg_hdr,
+				       ETS_SEG_NUM,
+				       sizeof(struct mpi_coredump_segment_header)
+				       + sizeof(mpi_coredump->ets),
+				       "ETS Registers");
+	status = qlge_get_ets_regs(qdev, &mpi_coredump->ets[0]);
+	if (status)
+		return;
+}
+
+void qlge_get_dump(struct qlge_adapter *qdev, void *buff)
+{
+	/*
+	 * If the dump has already been taken and is stored
+	 * in our internal buffer and if force dump is set then
+	 * just start the spool to dump it to the log file
+	 * and also, take a snapshot of the general regs
+	 * to the user's buffer or else take complete dump
+	 * to the user's buffer if force is not set.
+	 */
+
+	if (!test_bit(QL_FRC_COREDUMP, &qdev->flags)) {
+		if (!qlge_core_dump(qdev, buff))
+			qlge_soft_reset_mpi_risc(qdev);
+		else
+			netif_err(qdev, drv, qdev->ndev, "coredump failed!\n");
+	} else {
+		qlge_gen_reg_dump(qdev, buff);
+		qlge_get_core_dump(qdev);
+	}
+}
diff --git a/drivers/staging/qlge/qlge_devlink.c b/drivers/staging/qlge/qlge_devlink.c
new file mode 100644
index 000000000000..0ab02d6d3817
--- /dev/null
+++ b/drivers/staging/qlge/qlge_devlink.c
@@ -0,0 +1,167 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include "qlge.h"
+#include "qlge_devlink.h"
+
+static int qlge_fill_seg_(struct devlink_fmsg *fmsg,
+			  struct mpi_coredump_segment_header *seg_header,
+			  u32 *reg_data)
+{
+	int regs_num = (seg_header->seg_size
+			- sizeof(struct mpi_coredump_segment_header)) / sizeof(u32);
+	int err;
+	int i;
+
+	err = devlink_fmsg_pair_nest_start(fmsg, seg_header->description);
+	if (err)
+		return err;
+	err = devlink_fmsg_obj_nest_start(fmsg);
+	if (err)
+		return err;
+	err = devlink_fmsg_u32_pair_put(fmsg, "segment", seg_header->seg_num);
+	if (err)
+		return err;
+	err = devlink_fmsg_arr_pair_nest_start(fmsg, "values");
+	if (err)
+		return err;
+	for (i = 0; i < regs_num; i++) {
+		err = devlink_fmsg_u32_put(fmsg, *reg_data);
+		if (err)
+			return err;
+		reg_data++;
+	}
+	err = devlink_fmsg_obj_nest_end(fmsg);
+	if (err)
+		return err;
+	err = devlink_fmsg_arr_pair_nest_end(fmsg);
+	if (err)
+		return err;
+	err = devlink_fmsg_pair_nest_end(fmsg);
+	return err;
+}
+
+#define FILL_SEG(seg_hdr, seg_regs)			                    \
+	do {                                                                \
+		err = qlge_fill_seg_(fmsg, &dump->seg_hdr, dump->seg_regs); \
+		if (err) {					            \
+			kvfree(dump);                                       \
+			return err;				            \
+		}                                                           \
+	} while (0)
+
+static int qlge_reporter_coredump(struct devlink_health_reporter *reporter,
+				  struct devlink_fmsg *fmsg, void *priv_ctx,
+				  struct netlink_ext_ack *extack)
+{
+	int err = 0;
+
+	struct qlge_adapter *qdev = devlink_health_reporter_priv(reporter);
+	struct qlge_mpi_coredump *dump;
+	wait_queue_head_t wait;
+
+	if (!netif_running(qdev->ndev))
+		return 0;
+
+	if (test_bit(QL_FRC_COREDUMP, &qdev->flags)) {
+		if (qlge_own_firmware(qdev)) {
+			qlge_queue_fw_error(qdev);
+			init_waitqueue_head(&wait);
+			wait_event_timeout(wait, 0, 5 * HZ);
+		} else {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Force Coredump failed because this NIC function doesn't own the firmware\n");
+			return -EPERM;
+		}
+	}
+
+	dump = kvmalloc(sizeof(*dump), GFP_KERNEL);
+	if (!dump)
+		return -ENOMEM;
+
+	err = qlge_core_dump(qdev, dump);
+	if (err) {
+		kvfree(dump);
+		return err;
+	}
+
+	qlge_soft_reset_mpi_risc(qdev);
+
+	FILL_SEG(core_regs_seg_hdr, mpi_core_regs);
+	FILL_SEG(test_logic_regs_seg_hdr, test_logic_regs);
+	FILL_SEG(rmii_regs_seg_hdr, rmii_regs);
+	FILL_SEG(fcmac1_regs_seg_hdr, fcmac1_regs);
+	FILL_SEG(fcmac2_regs_seg_hdr, fcmac2_regs);
+	FILL_SEG(fc1_mbx_regs_seg_hdr, fc1_mbx_regs);
+	FILL_SEG(ide_regs_seg_hdr, ide_regs);
+	FILL_SEG(nic1_mbx_regs_seg_hdr, nic1_mbx_regs);
+	FILL_SEG(smbus_regs_seg_hdr, smbus_regs);
+	FILL_SEG(fc2_mbx_regs_seg_hdr, fc2_mbx_regs);
+	FILL_SEG(nic2_mbx_regs_seg_hdr, nic2_mbx_regs);
+	FILL_SEG(i2c_regs_seg_hdr, i2c_regs);
+	FILL_SEG(memc_regs_seg_hdr, memc_regs);
+	FILL_SEG(pbus_regs_seg_hdr, pbus_regs);
+	FILL_SEG(mde_regs_seg_hdr, mde_regs);
+	FILL_SEG(nic_regs_seg_hdr, nic_regs);
+	FILL_SEG(nic2_regs_seg_hdr, nic2_regs);
+	FILL_SEG(xgmac1_seg_hdr, xgmac1);
+	FILL_SEG(xgmac2_seg_hdr, xgmac2);
+	FILL_SEG(code_ram_seg_hdr, code_ram);
+	FILL_SEG(memc_ram_seg_hdr, memc_ram);
+	FILL_SEG(xaui_an_hdr, serdes_xaui_an);
+	FILL_SEG(xaui_hss_pcs_hdr, serdes_xaui_hss_pcs);
+	FILL_SEG(xfi_an_hdr, serdes_xfi_an);
+	FILL_SEG(xfi_train_hdr, serdes_xfi_train);
+	FILL_SEG(xfi_hss_pcs_hdr, serdes_xfi_hss_pcs);
+	FILL_SEG(xfi_hss_tx_hdr, serdes_xfi_hss_tx);
+	FILL_SEG(xfi_hss_rx_hdr, serdes_xfi_hss_rx);
+	FILL_SEG(xfi_hss_pll_hdr, serdes_xfi_hss_pll);
+
+	err = qlge_fill_seg_(fmsg, &dump->misc_nic_seg_hdr,
+			     (u32 *)&dump->misc_nic_info);
+	if (err) {
+		kvfree(dump);
+		return err;
+	}
+
+	FILL_SEG(intr_states_seg_hdr, intr_states);
+	FILL_SEG(cam_entries_seg_hdr, cam_entries);
+	FILL_SEG(nic_routing_words_seg_hdr, nic_routing_words);
+	FILL_SEG(ets_seg_hdr, ets);
+	FILL_SEG(probe_dump_seg_hdr, probe_dump);
+	FILL_SEG(routing_reg_seg_hdr, routing_regs);
+	FILL_SEG(mac_prot_reg_seg_hdr, mac_prot_regs);
+	FILL_SEG(xaui2_an_hdr, serdes2_xaui_an);
+	FILL_SEG(xaui2_hss_pcs_hdr, serdes2_xaui_hss_pcs);
+	FILL_SEG(xfi2_an_hdr, serdes2_xfi_an);
+	FILL_SEG(xfi2_train_hdr, serdes2_xfi_train);
+	FILL_SEG(xfi2_hss_pcs_hdr, serdes2_xfi_hss_pcs);
+	FILL_SEG(xfi2_hss_tx_hdr, serdes2_xfi_hss_tx);
+	FILL_SEG(xfi2_hss_rx_hdr, serdes2_xfi_hss_rx);
+	FILL_SEG(xfi2_hss_pll_hdr, serdes2_xfi_hss_pll);
+	FILL_SEG(sem_regs_seg_hdr, sem_regs);
+
+	kvfree(dump);
+	return err;
+}
+
+static const struct devlink_health_reporter_ops qlge_reporter_ops = {
+	.name = "coredump",
+	.dump = qlge_reporter_coredump,
+};
+
+long qlge_health_create_reporters(struct qlge_adapter *priv)
+{
+	struct devlink *devlink;
+	long err = 0;
+
+	devlink = priv_to_devlink(priv);
+	priv->reporter =
+		devlink_health_reporter_create(devlink, &qlge_reporter_ops,
+					       0, priv);
+	if (IS_ERR(priv->reporter)) {
+		err = PTR_ERR(priv->reporter);
+		netdev_warn(priv->ndev,
+			    "Failed to create reporter, err = %ld\n",
+			    err);
+	}
+	return err;
+}
diff --git a/drivers/staging/qlge/qlge_devlink.h b/drivers/staging/qlge/qlge_devlink.h
new file mode 100644
index 000000000000..94538e923f2f
--- /dev/null
+++ b/drivers/staging/qlge/qlge_devlink.h
@@ -0,0 +1,9 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef QLGE_DEVLINK_H
+#define QLGE_DEVLINK_H
+
+#include <net/devlink.h>
+
+long qlge_health_create_reporters(struct qlge_adapter *priv);
+
+#endif /* QLGE_DEVLINK_H */
diff --git a/drivers/staging/qlge/qlge_ethtool.c b/drivers/staging/qlge/qlge_ethtool.c
new file mode 100644
index 000000000000..12efcd1057ba
--- /dev/null
+++ b/drivers/staging/qlge/qlge_ethtool.c
@@ -0,0 +1,746 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/pagemap.h>
+#include <linux/sched.h>
+#include <linux/dmapool.h>
+#include <linux/mempool.h>
+#include <linux/spinlock.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <net/ipv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/rtnetlink.h>
+#include <linux/if_vlan.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+
+#include "qlge.h"
+
+struct qlge_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define QL_SIZEOF(m) sizeof_field(struct qlge_adapter, m)
+#define QL_OFF(m) offsetof(struct qlge_adapter, m)
+
+static const struct qlge_stats qlge_gstrings_stats[] = {
+	{"tx_pkts", QL_SIZEOF(nic_stats.tx_pkts), QL_OFF(nic_stats.tx_pkts)},
+	{"tx_bytes", QL_SIZEOF(nic_stats.tx_bytes), QL_OFF(nic_stats.tx_bytes)},
+	{"tx_mcast_pkts", QL_SIZEOF(nic_stats.tx_mcast_pkts),
+					QL_OFF(nic_stats.tx_mcast_pkts)},
+	{"tx_bcast_pkts", QL_SIZEOF(nic_stats.tx_bcast_pkts),
+					QL_OFF(nic_stats.tx_bcast_pkts)},
+	{"tx_ucast_pkts", QL_SIZEOF(nic_stats.tx_ucast_pkts),
+					QL_OFF(nic_stats.tx_ucast_pkts)},
+	{"tx_ctl_pkts", QL_SIZEOF(nic_stats.tx_ctl_pkts),
+					QL_OFF(nic_stats.tx_ctl_pkts)},
+	{"tx_pause_pkts", QL_SIZEOF(nic_stats.tx_pause_pkts),
+					QL_OFF(nic_stats.tx_pause_pkts)},
+	{"tx_64_pkts", QL_SIZEOF(nic_stats.tx_64_pkt),
+					QL_OFF(nic_stats.tx_64_pkt)},
+	{"tx_65_to_127_pkts", QL_SIZEOF(nic_stats.tx_65_to_127_pkt),
+					QL_OFF(nic_stats.tx_65_to_127_pkt)},
+	{"tx_128_to_255_pkts", QL_SIZEOF(nic_stats.tx_128_to_255_pkt),
+					QL_OFF(nic_stats.tx_128_to_255_pkt)},
+	{"tx_256_511_pkts", QL_SIZEOF(nic_stats.tx_256_511_pkt),
+					QL_OFF(nic_stats.tx_256_511_pkt)},
+	{"tx_512_to_1023_pkts",	QL_SIZEOF(nic_stats.tx_512_to_1023_pkt),
+					QL_OFF(nic_stats.tx_512_to_1023_pkt)},
+	{"tx_1024_to_1518_pkts", QL_SIZEOF(nic_stats.tx_1024_to_1518_pkt),
+					QL_OFF(nic_stats.tx_1024_to_1518_pkt)},
+	{"tx_1519_to_max_pkts",	QL_SIZEOF(nic_stats.tx_1519_to_max_pkt),
+					QL_OFF(nic_stats.tx_1519_to_max_pkt)},
+	{"tx_undersize_pkts", QL_SIZEOF(nic_stats.tx_undersize_pkt),
+					QL_OFF(nic_stats.tx_undersize_pkt)},
+	{"tx_oversize_pkts", QL_SIZEOF(nic_stats.tx_oversize_pkt),
+					QL_OFF(nic_stats.tx_oversize_pkt)},
+	{"rx_bytes", QL_SIZEOF(nic_stats.rx_bytes), QL_OFF(nic_stats.rx_bytes)},
+	{"rx_bytes_ok",	QL_SIZEOF(nic_stats.rx_bytes_ok),
+					QL_OFF(nic_stats.rx_bytes_ok)},
+	{"rx_pkts", QL_SIZEOF(nic_stats.rx_pkts), QL_OFF(nic_stats.rx_pkts)},
+	{"rx_pkts_ok", QL_SIZEOF(nic_stats.rx_pkts_ok),
+					QL_OFF(nic_stats.rx_pkts_ok)},
+	{"rx_bcast_pkts", QL_SIZEOF(nic_stats.rx_bcast_pkts),
+					QL_OFF(nic_stats.rx_bcast_pkts)},
+	{"rx_mcast_pkts", QL_SIZEOF(nic_stats.rx_mcast_pkts),
+					QL_OFF(nic_stats.rx_mcast_pkts)},
+	{"rx_ucast_pkts", QL_SIZEOF(nic_stats.rx_ucast_pkts),
+					QL_OFF(nic_stats.rx_ucast_pkts)},
+	{"rx_undersize_pkts", QL_SIZEOF(nic_stats.rx_undersize_pkts),
+					QL_OFF(nic_stats.rx_undersize_pkts)},
+	{"rx_oversize_pkts", QL_SIZEOF(nic_stats.rx_oversize_pkts),
+					QL_OFF(nic_stats.rx_oversize_pkts)},
+	{"rx_jabber_pkts", QL_SIZEOF(nic_stats.rx_jabber_pkts),
+					QL_OFF(nic_stats.rx_jabber_pkts)},
+	{"rx_undersize_fcerr_pkts",
+		QL_SIZEOF(nic_stats.rx_undersize_fcerr_pkts),
+				QL_OFF(nic_stats.rx_undersize_fcerr_pkts)},
+	{"rx_drop_events", QL_SIZEOF(nic_stats.rx_drop_events),
+					QL_OFF(nic_stats.rx_drop_events)},
+	{"rx_fcerr_pkts", QL_SIZEOF(nic_stats.rx_fcerr_pkts),
+					QL_OFF(nic_stats.rx_fcerr_pkts)},
+	{"rx_align_err", QL_SIZEOF(nic_stats.rx_align_err),
+					QL_OFF(nic_stats.rx_align_err)},
+	{"rx_symbol_err", QL_SIZEOF(nic_stats.rx_symbol_err),
+					QL_OFF(nic_stats.rx_symbol_err)},
+	{"rx_mac_err", QL_SIZEOF(nic_stats.rx_mac_err),
+					QL_OFF(nic_stats.rx_mac_err)},
+	{"rx_ctl_pkts",	QL_SIZEOF(nic_stats.rx_ctl_pkts),
+					QL_OFF(nic_stats.rx_ctl_pkts)},
+	{"rx_pause_pkts", QL_SIZEOF(nic_stats.rx_pause_pkts),
+					QL_OFF(nic_stats.rx_pause_pkts)},
+	{"rx_64_pkts", QL_SIZEOF(nic_stats.rx_64_pkts),
+					QL_OFF(nic_stats.rx_64_pkts)},
+	{"rx_65_to_127_pkts", QL_SIZEOF(nic_stats.rx_65_to_127_pkts),
+					QL_OFF(nic_stats.rx_65_to_127_pkts)},
+	{"rx_128_255_pkts", QL_SIZEOF(nic_stats.rx_128_255_pkts),
+					QL_OFF(nic_stats.rx_128_255_pkts)},
+	{"rx_256_511_pkts", QL_SIZEOF(nic_stats.rx_256_511_pkts),
+					QL_OFF(nic_stats.rx_256_511_pkts)},
+	{"rx_512_to_1023_pkts",	QL_SIZEOF(nic_stats.rx_512_to_1023_pkts),
+					QL_OFF(nic_stats.rx_512_to_1023_pkts)},
+	{"rx_1024_to_1518_pkts", QL_SIZEOF(nic_stats.rx_1024_to_1518_pkts),
+					QL_OFF(nic_stats.rx_1024_to_1518_pkts)},
+	{"rx_1519_to_max_pkts",	QL_SIZEOF(nic_stats.rx_1519_to_max_pkts),
+					QL_OFF(nic_stats.rx_1519_to_max_pkts)},
+	{"rx_len_err_pkts", QL_SIZEOF(nic_stats.rx_len_err_pkts),
+					QL_OFF(nic_stats.rx_len_err_pkts)},
+	{"rx_code_err",	QL_SIZEOF(nic_stats.rx_code_err),
+					QL_OFF(nic_stats.rx_code_err)},
+	{"rx_oversize_err", QL_SIZEOF(nic_stats.rx_oversize_err),
+					QL_OFF(nic_stats.rx_oversize_err)},
+	{"rx_undersize_err", QL_SIZEOF(nic_stats.rx_undersize_err),
+					QL_OFF(nic_stats.rx_undersize_err)},
+	{"rx_preamble_err", QL_SIZEOF(nic_stats.rx_preamble_err),
+					QL_OFF(nic_stats.rx_preamble_err)},
+	{"rx_frame_len_err", QL_SIZEOF(nic_stats.rx_frame_len_err),
+					QL_OFF(nic_stats.rx_frame_len_err)},
+	{"rx_crc_err", QL_SIZEOF(nic_stats.rx_crc_err),
+					QL_OFF(nic_stats.rx_crc_err)},
+	{"rx_err_count", QL_SIZEOF(nic_stats.rx_err_count),
+					QL_OFF(nic_stats.rx_err_count)},
+	{"tx_cbfc_pause_frames0", QL_SIZEOF(nic_stats.tx_cbfc_pause_frames0),
+				QL_OFF(nic_stats.tx_cbfc_pause_frames0)},
+	{"tx_cbfc_pause_frames1", QL_SIZEOF(nic_stats.tx_cbfc_pause_frames1),
+				QL_OFF(nic_stats.tx_cbfc_pause_frames1)},
+	{"tx_cbfc_pause_frames2", QL_SIZEOF(nic_stats.tx_cbfc_pause_frames2),
+				QL_OFF(nic_stats.tx_cbfc_pause_frames2)},
+	{"tx_cbfc_pause_frames3", QL_SIZEOF(nic_stats.tx_cbfc_pause_frames3),
+				QL_OFF(nic_stats.tx_cbfc_pause_frames3)},
+	{"tx_cbfc_pause_frames4", QL_SIZEOF(nic_stats.tx_cbfc_pause_frames4),
+				QL_OFF(nic_stats.tx_cbfc_pause_frames4)},
+	{"tx_cbfc_pause_frames5", QL_SIZEOF(nic_stats.tx_cbfc_pause_frames5),
+				QL_OFF(nic_stats.tx_cbfc_pause_frames5)},
+	{"tx_cbfc_pause_frames6", QL_SIZEOF(nic_stats.tx_cbfc_pause_frames6),
+				QL_OFF(nic_stats.tx_cbfc_pause_frames6)},
+	{"tx_cbfc_pause_frames7", QL_SIZEOF(nic_stats.tx_cbfc_pause_frames7),
+				QL_OFF(nic_stats.tx_cbfc_pause_frames7)},
+	{"rx_cbfc_pause_frames0", QL_SIZEOF(nic_stats.rx_cbfc_pause_frames0),
+				QL_OFF(nic_stats.rx_cbfc_pause_frames0)},
+	{"rx_cbfc_pause_frames1", QL_SIZEOF(nic_stats.rx_cbfc_pause_frames1),
+				QL_OFF(nic_stats.rx_cbfc_pause_frames1)},
+	{"rx_cbfc_pause_frames2", QL_SIZEOF(nic_stats.rx_cbfc_pause_frames2),
+				QL_OFF(nic_stats.rx_cbfc_pause_frames2)},
+	{"rx_cbfc_pause_frames3", QL_SIZEOF(nic_stats.rx_cbfc_pause_frames3),
+				QL_OFF(nic_stats.rx_cbfc_pause_frames3)},
+	{"rx_cbfc_pause_frames4", QL_SIZEOF(nic_stats.rx_cbfc_pause_frames4),
+				QL_OFF(nic_stats.rx_cbfc_pause_frames4)},
+	{"rx_cbfc_pause_frames5", QL_SIZEOF(nic_stats.rx_cbfc_pause_frames5),
+				QL_OFF(nic_stats.rx_cbfc_pause_frames5)},
+	{"rx_cbfc_pause_frames6", QL_SIZEOF(nic_stats.rx_cbfc_pause_frames6),
+				QL_OFF(nic_stats.rx_cbfc_pause_frames6)},
+	{"rx_cbfc_pause_frames7", QL_SIZEOF(nic_stats.rx_cbfc_pause_frames7),
+				QL_OFF(nic_stats.rx_cbfc_pause_frames7)},
+	{"rx_nic_fifo_drop", QL_SIZEOF(nic_stats.rx_nic_fifo_drop),
+					QL_OFF(nic_stats.rx_nic_fifo_drop)},
+};
+
+static const char qlge_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Loopback test  (offline)"
+};
+
+#define QLGE_TEST_LEN (sizeof(qlge_gstrings_test) / ETH_GSTRING_LEN)
+#define QLGE_STATS_LEN ARRAY_SIZE(qlge_gstrings_stats)
+#define QLGE_RCV_MAC_ERR_STATS	7
+
+static int qlge_update_ring_coalescing(struct qlge_adapter *qdev)
+{
+	int i, status = 0;
+	struct rx_ring *rx_ring;
+	struct cqicb *cqicb;
+
+	if (!netif_running(qdev->ndev))
+		return status;
+
+	/* Skip the default queue, and update the outbound handler
+	 * queues if they changed.
+	 */
+	cqicb = (struct cqicb *)&qdev->rx_ring[qdev->rss_ring_count];
+	if (le16_to_cpu(cqicb->irq_delay) != qdev->tx_coalesce_usecs ||
+	    le16_to_cpu(cqicb->pkt_delay) != qdev->tx_max_coalesced_frames) {
+		for (i = qdev->rss_ring_count; i < qdev->rx_ring_count; i++) {
+			rx_ring = &qdev->rx_ring[i];
+			cqicb = (struct cqicb *)rx_ring;
+			cqicb->irq_delay = cpu_to_le16(qdev->tx_coalesce_usecs);
+			cqicb->pkt_delay =
+				cpu_to_le16(qdev->tx_max_coalesced_frames);
+			cqicb->flags = FLAGS_LI;
+			status = qlge_write_cfg(qdev, cqicb, sizeof(*cqicb),
+						CFG_LCQ, rx_ring->cq_id);
+			if (status) {
+				netif_err(qdev, ifup, qdev->ndev,
+					  "Failed to load CQICB.\n");
+				goto exit;
+			}
+		}
+	}
+
+	/* Update the inbound (RSS) handler queues if they changed. */
+	cqicb = (struct cqicb *)&qdev->rx_ring[0];
+	if (le16_to_cpu(cqicb->irq_delay) != qdev->rx_coalesce_usecs ||
+	    le16_to_cpu(cqicb->pkt_delay) != qdev->rx_max_coalesced_frames) {
+		for (i = 0; i < qdev->rss_ring_count; i++, rx_ring++) {
+			rx_ring = &qdev->rx_ring[i];
+			cqicb = (struct cqicb *)rx_ring;
+			cqicb->irq_delay = cpu_to_le16(qdev->rx_coalesce_usecs);
+			cqicb->pkt_delay =
+				cpu_to_le16(qdev->rx_max_coalesced_frames);
+			cqicb->flags = FLAGS_LI;
+			status = qlge_write_cfg(qdev, cqicb, sizeof(*cqicb),
+						CFG_LCQ, rx_ring->cq_id);
+			if (status) {
+				netif_err(qdev, ifup, qdev->ndev,
+					  "Failed to load CQICB.\n");
+				goto exit;
+			}
+		}
+	}
+exit:
+	return status;
+}
+
+static void qlge_update_stats(struct qlge_adapter *qdev)
+{
+	u32 i;
+	u64 data;
+	u64 *iter = &qdev->nic_stats.tx_pkts;
+
+	spin_lock(&qdev->stats_lock);
+	if (qlge_sem_spinlock(qdev, qdev->xg_sem_mask)) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Couldn't get xgmac sem.\n");
+		goto quit;
+	}
+	/*
+	 * Get TX statistics.
+	 */
+	for (i = 0x200; i < 0x280; i += 8) {
+		if (qlge_read_xgmac_reg64(qdev, i, &data)) {
+			netif_err(qdev, drv, qdev->ndev,
+				  "Error reading status register 0x%.04x.\n",
+				  i);
+			goto end;
+		} else {
+			*iter = data;
+		}
+		iter++;
+	}
+
+	/*
+	 * Get RX statistics.
+	 */
+	for (i = 0x300; i < 0x3d0; i += 8) {
+		if (qlge_read_xgmac_reg64(qdev, i, &data)) {
+			netif_err(qdev, drv, qdev->ndev,
+				  "Error reading status register 0x%.04x.\n",
+				  i);
+			goto end;
+		} else {
+			*iter = data;
+		}
+		iter++;
+	}
+
+	/* Update receive mac error statistics */
+	iter += QLGE_RCV_MAC_ERR_STATS;
+
+	/*
+	 * Get Per-priority TX pause frame counter statistics.
+	 */
+	for (i = 0x500; i < 0x540; i += 8) {
+		if (qlge_read_xgmac_reg64(qdev, i, &data)) {
+			netif_err(qdev, drv, qdev->ndev,
+				  "Error reading status register 0x%.04x.\n",
+				  i);
+			goto end;
+		} else {
+			*iter = data;
+		}
+		iter++;
+	}
+
+	/*
+	 * Get Per-priority RX pause frame counter statistics.
+	 */
+	for (i = 0x568; i < 0x5a8; i += 8) {
+		if (qlge_read_xgmac_reg64(qdev, i, &data)) {
+			netif_err(qdev, drv, qdev->ndev,
+				  "Error reading status register 0x%.04x.\n",
+				  i);
+			goto end;
+		} else {
+			*iter = data;
+		}
+		iter++;
+	}
+
+	/*
+	 * Get RX NIC FIFO DROP statistics.
+	 */
+	if (qlge_read_xgmac_reg64(qdev, 0x5b8, &data)) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Error reading status register 0x%.04x.\n", i);
+		goto end;
+	} else {
+		*iter = data;
+	}
+end:
+	qlge_sem_unlock(qdev, qdev->xg_sem_mask);
+quit:
+	spin_unlock(&qdev->stats_lock);
+}
+
+static void qlge_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
+{
+	int index;
+
+	switch (stringset) {
+	case ETH_SS_TEST:
+		memcpy(buf, *qlge_gstrings_test, QLGE_TEST_LEN * ETH_GSTRING_LEN);
+		break;
+	case ETH_SS_STATS:
+		for (index = 0; index < QLGE_STATS_LEN; index++) {
+			memcpy(buf + index * ETH_GSTRING_LEN,
+			       qlge_gstrings_stats[index].stat_string,
+			       ETH_GSTRING_LEN);
+		}
+		break;
+	}
+}
+
+static int qlge_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_TEST:
+		return QLGE_TEST_LEN;
+	case ETH_SS_STATS:
+		return QLGE_STATS_LEN;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void
+qlge_get_ethtool_stats(struct net_device *ndev,
+		       struct ethtool_stats *stats, u64 *data)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	int index, length;
+
+	length = QLGE_STATS_LEN;
+	qlge_update_stats(qdev);
+
+	for (index = 0; index < length; index++) {
+		char *p = (char *)qdev +
+			qlge_gstrings_stats[index].stat_offset;
+		*data++ = (qlge_gstrings_stats[index].sizeof_stat ==
+			   sizeof(u64)) ? *(u64 *)p : (*(u32 *)p);
+	}
+}
+
+static int qlge_get_link_ksettings(struct net_device *ndev,
+				   struct ethtool_link_ksettings *ecmd)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	u32 supported, advertising;
+
+	supported = SUPPORTED_10000baseT_Full;
+	advertising = ADVERTISED_10000baseT_Full;
+
+	if ((qdev->link_status & STS_LINK_TYPE_MASK) ==
+	    STS_LINK_TYPE_10GBASET) {
+		supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
+		advertising |= (ADVERTISED_TP | ADVERTISED_Autoneg);
+		ecmd->base.port = PORT_TP;
+		ecmd->base.autoneg = AUTONEG_ENABLE;
+	} else {
+		supported |= SUPPORTED_FIBRE;
+		advertising |= ADVERTISED_FIBRE;
+		ecmd->base.port = PORT_FIBRE;
+	}
+
+	ecmd->base.speed = SPEED_10000;
+	ecmd->base.duplex = DUPLEX_FULL;
+
+	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
+						supported);
+	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising,
+						advertising);
+
+	return 0;
+}
+
+static void qlge_get_drvinfo(struct net_device *ndev,
+			     struct ethtool_drvinfo *drvinfo)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	strscpy(drvinfo->driver, qlge_driver_name, sizeof(drvinfo->driver));
+	strscpy(drvinfo->version, qlge_driver_version,
+		sizeof(drvinfo->version));
+	snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
+		 "v%d.%d.%d",
+		 (qdev->fw_rev_id & 0x00ff0000) >> 16,
+		 (qdev->fw_rev_id & 0x0000ff00) >> 8,
+		 (qdev->fw_rev_id & 0x000000ff));
+	strscpy(drvinfo->bus_info, pci_name(qdev->pdev),
+		sizeof(drvinfo->bus_info));
+}
+
+static void qlge_get_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	unsigned short ssys_dev = qdev->pdev->subsystem_device;
+
+	/* WOL is only supported for mezz card. */
+	if (ssys_dev == QLGE_MEZZ_SSYS_ID_068 ||
+	    ssys_dev == QLGE_MEZZ_SSYS_ID_180) {
+		wol->supported = WAKE_MAGIC;
+		wol->wolopts = qdev->wol;
+	}
+}
+
+static int qlge_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	unsigned short ssys_dev = qdev->pdev->subsystem_device;
+
+	/* WOL is only supported for mezz card. */
+	if (ssys_dev != QLGE_MEZZ_SSYS_ID_068 &&
+	    ssys_dev != QLGE_MEZZ_SSYS_ID_180) {
+		netif_info(qdev, drv, qdev->ndev,
+			   "WOL is only supported for mezz card\n");
+		return -EOPNOTSUPP;
+	}
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+	qdev->wol = wol->wolopts;
+
+	netif_info(qdev, drv, qdev->ndev, "Set wol option 0x%x\n", qdev->wol);
+	return 0;
+}
+
+static int qlge_set_phys_id(struct net_device *ndev,
+			    enum ethtool_phys_id_state state)
+
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	switch (state) {
+	case ETHTOOL_ID_ACTIVE:
+		/* Save the current LED settings */
+		if (qlge_mb_get_led_cfg(qdev))
+			return -EIO;
+
+		/* Start blinking */
+		qlge_mb_set_led_cfg(qdev, QL_LED_BLINK);
+		return 0;
+
+	case ETHTOOL_ID_INACTIVE:
+		/* Restore LED settings */
+		if (qlge_mb_set_led_cfg(qdev, qdev->led_config))
+			return -EIO;
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int qlge_start_loopback(struct qlge_adapter *qdev)
+{
+	if (netif_carrier_ok(qdev->ndev)) {
+		set_bit(QL_LB_LINK_UP, &qdev->flags);
+		netif_carrier_off(qdev->ndev);
+	} else {
+		clear_bit(QL_LB_LINK_UP, &qdev->flags);
+	}
+	qdev->link_config |= CFG_LOOPBACK_PCS;
+	return qlge_mb_set_port_cfg(qdev);
+}
+
+static void qlge_stop_loopback(struct qlge_adapter *qdev)
+{
+	qdev->link_config &= ~CFG_LOOPBACK_PCS;
+	qlge_mb_set_port_cfg(qdev);
+	if (test_bit(QL_LB_LINK_UP, &qdev->flags)) {
+		netif_carrier_on(qdev->ndev);
+		clear_bit(QL_LB_LINK_UP, &qdev->flags);
+	}
+}
+
+static void qlge_create_lb_frame(struct sk_buff *skb,
+				 unsigned int frame_size)
+{
+	memset(skb->data, 0xFF, frame_size);
+	frame_size &= ~1;
+	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+	skb->data[frame_size / 2 + 10] = (unsigned char)0xBE;
+	skb->data[frame_size / 2 + 12] = (unsigned char)0xAF;
+}
+
+void qlge_check_lb_frame(struct qlge_adapter *qdev,
+			 struct sk_buff *skb)
+{
+	unsigned int frame_size = skb->len;
+
+	if ((*(skb->data + 3) == 0xFF) &&
+	    (*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+	    (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+		atomic_dec(&qdev->lb_count);
+		return;
+	}
+}
+
+static int qlge_run_loopback_test(struct qlge_adapter *qdev)
+{
+	int i;
+	netdev_tx_t rc;
+	struct sk_buff *skb;
+	unsigned int size = SMALL_BUF_MAP_SIZE;
+
+	for (i = 0; i < 64; i++) {
+		skb = netdev_alloc_skb(qdev->ndev, size);
+		if (!skb)
+			return -ENOMEM;
+
+		skb->queue_mapping = 0;
+		skb_put(skb, size);
+		qlge_create_lb_frame(skb, size);
+		rc = qlge_lb_send(skb, qdev->ndev);
+		if (rc != NETDEV_TX_OK)
+			return -EPIPE;
+		atomic_inc(&qdev->lb_count);
+	}
+	/* Give queue time to settle before testing results. */
+	usleep_range(2000, 2100);
+	qlge_clean_lb_rx_ring(&qdev->rx_ring[0], 128);
+	return atomic_read(&qdev->lb_count) ? -EIO : 0;
+}
+
+static int qlge_loopback_test(struct qlge_adapter *qdev, u64 *data)
+{
+	*data = qlge_start_loopback(qdev);
+	if (*data)
+		goto out;
+	*data = qlge_run_loopback_test(qdev);
+out:
+	qlge_stop_loopback(qdev);
+	return *data;
+}
+
+static void qlge_self_test(struct net_device *ndev,
+			   struct ethtool_test *eth_test, u64 *data)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	memset(data, 0, sizeof(u64) * QLGE_TEST_LEN);
+
+	if (netif_running(ndev)) {
+		set_bit(QL_SELFTEST, &qdev->flags);
+		if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+			/* Offline tests */
+			if (qlge_loopback_test(qdev, &data[0]))
+				eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		} else {
+			/* Online tests */
+			data[0] = 0;
+		}
+		clear_bit(QL_SELFTEST, &qdev->flags);
+		/* Give link time to come up after
+		 * port configuration changes.
+		 */
+		msleep_interruptible(4 * 1000);
+	} else {
+		netif_err(qdev, drv, qdev->ndev,
+			  "is down, Loopback test will fail.\n");
+		eth_test->flags |= ETH_TEST_FL_FAILED;
+	}
+}
+
+static int qlge_get_regs_len(struct net_device *ndev)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	if (!test_bit(QL_FRC_COREDUMP, &qdev->flags))
+		return sizeof(struct qlge_mpi_coredump);
+	else
+		return sizeof(struct qlge_reg_dump);
+}
+
+static void qlge_get_regs(struct net_device *ndev,
+			  struct ethtool_regs *regs, void *p)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	qlge_get_dump(qdev, p);
+	if (!test_bit(QL_FRC_COREDUMP, &qdev->flags))
+		regs->len = sizeof(struct qlge_mpi_coredump);
+	else
+		regs->len = sizeof(struct qlge_reg_dump);
+}
+
+static int qlge_get_coalesce(struct net_device *ndev,
+			     struct ethtool_coalesce *c,
+			     struct kernel_ethtool_coalesce *kernel_coal,
+			     struct netlink_ext_ack *extack)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	c->rx_coalesce_usecs = qdev->rx_coalesce_usecs;
+	c->tx_coalesce_usecs = qdev->tx_coalesce_usecs;
+
+	/* This chip coalesces as follows:
+	 * If a packet arrives, hold off interrupts until
+	 * cqicb->int_delay expires, but if no other packets arrive don't
+	 * wait longer than cqicb->pkt_int_delay. But ethtool doesn't use a
+	 * timer to coalesce on a frame basis.  So, we have to take ethtool's
+	 * max_coalesced_frames value and convert it to a delay in microseconds.
+	 * We do this by using a basic thoughput of 1,000,000 frames per
+	 * second @ (1024 bytes).  This means one frame per usec. So it's a
+	 * simple one to one ratio.
+	 */
+	c->rx_max_coalesced_frames = qdev->rx_max_coalesced_frames;
+	c->tx_max_coalesced_frames = qdev->tx_max_coalesced_frames;
+
+	return 0;
+}
+
+static int qlge_set_coalesce(struct net_device *ndev,
+			     struct ethtool_coalesce *c,
+			     struct kernel_ethtool_coalesce *kernel_coal,
+			     struct netlink_ext_ack *extack)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	/* Validate user parameters. */
+	if (c->rx_coalesce_usecs > qdev->rx_ring_size / 2)
+		return -EINVAL;
+	/* Don't wait more than 10 usec. */
+	if (c->rx_max_coalesced_frames > MAX_INTER_FRAME_WAIT)
+		return -EINVAL;
+	if (c->tx_coalesce_usecs > qdev->tx_ring_size / 2)
+		return -EINVAL;
+	if (c->tx_max_coalesced_frames > MAX_INTER_FRAME_WAIT)
+		return -EINVAL;
+
+	/* Verify a change took place before updating the hardware. */
+	if (qdev->rx_coalesce_usecs == c->rx_coalesce_usecs &&
+	    qdev->tx_coalesce_usecs == c->tx_coalesce_usecs &&
+	    qdev->rx_max_coalesced_frames == c->rx_max_coalesced_frames &&
+	    qdev->tx_max_coalesced_frames == c->tx_max_coalesced_frames)
+		return 0;
+
+	qdev->rx_coalesce_usecs = c->rx_coalesce_usecs;
+	qdev->tx_coalesce_usecs = c->tx_coalesce_usecs;
+	qdev->rx_max_coalesced_frames = c->rx_max_coalesced_frames;
+	qdev->tx_max_coalesced_frames = c->tx_max_coalesced_frames;
+
+	return qlge_update_ring_coalescing(qdev);
+}
+
+static void qlge_get_pauseparam(struct net_device *ndev,
+				struct ethtool_pauseparam *pause)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	qlge_mb_get_port_cfg(qdev);
+	if (qdev->link_config & CFG_PAUSE_STD) {
+		pause->rx_pause = 1;
+		pause->tx_pause = 1;
+	}
+}
+
+static int qlge_set_pauseparam(struct net_device *ndev,
+			       struct ethtool_pauseparam *pause)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	if ((pause->rx_pause) && (pause->tx_pause))
+		qdev->link_config |= CFG_PAUSE_STD;
+	else if (!pause->rx_pause && !pause->tx_pause)
+		qdev->link_config &= ~CFG_PAUSE_STD;
+	else
+		return -EINVAL;
+
+	return qlge_mb_set_port_cfg(qdev);
+}
+
+static u32 qlge_get_msglevel(struct net_device *ndev)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	return qdev->msg_enable;
+}
+
+static void qlge_set_msglevel(struct net_device *ndev, u32 value)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	qdev->msg_enable = value;
+}
+
+const struct ethtool_ops qlge_ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+				     ETHTOOL_COALESCE_MAX_FRAMES,
+	.get_drvinfo = qlge_get_drvinfo,
+	.get_wol = qlge_get_wol,
+	.set_wol = qlge_set_wol,
+	.get_regs_len	= qlge_get_regs_len,
+	.get_regs = qlge_get_regs,
+	.get_msglevel = qlge_get_msglevel,
+	.set_msglevel = qlge_set_msglevel,
+	.get_link = ethtool_op_get_link,
+	.set_phys_id		 = qlge_set_phys_id,
+	.self_test		 = qlge_self_test,
+	.get_pauseparam		 = qlge_get_pauseparam,
+	.set_pauseparam		 = qlge_set_pauseparam,
+	.get_coalesce = qlge_get_coalesce,
+	.set_coalesce = qlge_set_coalesce,
+	.get_sset_count = qlge_get_sset_count,
+	.get_strings = qlge_get_strings,
+	.get_ethtool_stats = qlge_get_ethtool_stats,
+	.get_link_ksettings = qlge_get_link_ksettings,
+};
+
diff --git a/drivers/staging/qlge/qlge_main.c b/drivers/staging/qlge/qlge_main.c
new file mode 100644
index 000000000000..1ead7793062a
--- /dev/null
+++ b/drivers/staging/qlge/qlge_main.c
@@ -0,0 +1,4845 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * QLogic qlge NIC HBA Driver
+ * Copyright (c)  2003-2008 QLogic Corporation
+ * Author:     Linux qlge network device driver by
+ *                      Ron Mercer <ron.mercer@qlogic.com>
+ */
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/pagemap.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/dmapool.h>
+#include <linux/mempool.h>
+#include <linux/spinlock.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <net/ipv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/prefetch.h>
+#include <net/ip6_checksum.h>
+
+#include "qlge.h"
+#include "qlge_devlink.h"
+
+char qlge_driver_name[] = DRV_NAME;
+const char qlge_driver_version[] = DRV_VERSION;
+
+MODULE_AUTHOR("Ron Mercer <ron.mercer@qlogic.com>");
+MODULE_DESCRIPTION(DRV_STRING " ");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static const u32 default_msg =
+	NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK |
+	NETIF_MSG_IFDOWN |
+	NETIF_MSG_IFUP |
+	NETIF_MSG_RX_ERR |
+	NETIF_MSG_TX_ERR |
+	NETIF_MSG_HW | NETIF_MSG_WOL | 0;
+
+static int debug = -1;	/* defaults above */
+module_param(debug, int, 0664);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+#define MSIX_IRQ 0
+#define MSI_IRQ 1
+#define LEG_IRQ 2
+static int qlge_irq_type = MSIX_IRQ;
+module_param(qlge_irq_type, int, 0664);
+MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
+
+static int qlge_mpi_coredump;
+module_param(qlge_mpi_coredump, int, 0);
+MODULE_PARM_DESC(qlge_mpi_coredump,
+		 "Option to enable MPI firmware dump. Default is OFF - Do Not allocate memory. ");
+
+static int qlge_force_coredump;
+module_param(qlge_force_coredump, int, 0);
+MODULE_PARM_DESC(qlge_force_coredump,
+		 "Option to allow force of firmware core dump. Default is OFF - Do not allow.");
+
+static const struct pci_device_id qlge_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
+	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8000)},
+	/* required last entry */
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, qlge_pci_tbl);
+
+static int qlge_wol(struct qlge_adapter *);
+static void qlge_set_multicast_list(struct net_device *);
+static int qlge_adapter_down(struct qlge_adapter *);
+static int qlge_adapter_up(struct qlge_adapter *);
+
+/* This hardware semaphore causes exclusive access to
+ * resources shared between the NIC driver, MPI firmware,
+ * FCOE firmware and the FC driver.
+ */
+static int qlge_sem_trylock(struct qlge_adapter *qdev, u32 sem_mask)
+{
+	u32 sem_bits = 0;
+
+	switch (sem_mask) {
+	case SEM_XGMAC0_MASK:
+		sem_bits = SEM_SET << SEM_XGMAC0_SHIFT;
+		break;
+	case SEM_XGMAC1_MASK:
+		sem_bits = SEM_SET << SEM_XGMAC1_SHIFT;
+		break;
+	case SEM_ICB_MASK:
+		sem_bits = SEM_SET << SEM_ICB_SHIFT;
+		break;
+	case SEM_MAC_ADDR_MASK:
+		sem_bits = SEM_SET << SEM_MAC_ADDR_SHIFT;
+		break;
+	case SEM_FLASH_MASK:
+		sem_bits = SEM_SET << SEM_FLASH_SHIFT;
+		break;
+	case SEM_PROBE_MASK:
+		sem_bits = SEM_SET << SEM_PROBE_SHIFT;
+		break;
+	case SEM_RT_IDX_MASK:
+		sem_bits = SEM_SET << SEM_RT_IDX_SHIFT;
+		break;
+	case SEM_PROC_REG_MASK:
+		sem_bits = SEM_SET << SEM_PROC_REG_SHIFT;
+		break;
+	default:
+		netif_alert(qdev, probe, qdev->ndev, "bad Semaphore mask!.\n");
+		return -EINVAL;
+	}
+
+	qlge_write32(qdev, SEM, sem_bits | sem_mask);
+	return !(qlge_read32(qdev, SEM) & sem_bits);
+}
+
+int qlge_sem_spinlock(struct qlge_adapter *qdev, u32 sem_mask)
+{
+	unsigned int wait_count = 30;
+
+	do {
+		if (!qlge_sem_trylock(qdev, sem_mask))
+			return 0;
+		udelay(100);
+	} while (--wait_count);
+	return -ETIMEDOUT;
+}
+
+void qlge_sem_unlock(struct qlge_adapter *qdev, u32 sem_mask)
+{
+	qlge_write32(qdev, SEM, sem_mask);
+	qlge_read32(qdev, SEM);	/* flush */
+}
+
+/* This function waits for a specific bit to come ready
+ * in a given register.  It is used mostly by the initialize
+ * process, but is also used in kernel thread API such as
+ * netdev->set_multi, netdev->set_mac_address, netdev->vlan_rx_add_vid.
+ */
+int qlge_wait_reg_rdy(struct qlge_adapter *qdev, u32 reg, u32 bit, u32 err_bit)
+{
+	u32 temp;
+	int count;
+
+	for (count = 0; count < UDELAY_COUNT; count++) {
+		temp = qlge_read32(qdev, reg);
+
+		/* check for errors */
+		if (temp & err_bit) {
+			netif_alert(qdev, probe, qdev->ndev,
+				    "register 0x%.08x access error, value = 0x%.08x!.\n",
+				    reg, temp);
+			return -EIO;
+		} else if (temp & bit) {
+			return 0;
+		}
+		udelay(UDELAY_DELAY);
+	}
+	netif_alert(qdev, probe, qdev->ndev,
+		    "Timed out waiting for reg %x to come ready.\n", reg);
+	return -ETIMEDOUT;
+}
+
+/* The CFG register is used to download TX and RX control blocks
+ * to the chip. This function waits for an operation to complete.
+ */
+static int qlge_wait_cfg(struct qlge_adapter *qdev, u32 bit)
+{
+	int count;
+	u32 temp;
+
+	for (count = 0; count < UDELAY_COUNT; count++) {
+		temp = qlge_read32(qdev, CFG);
+		if (temp & CFG_LE)
+			return -EIO;
+		if (!(temp & bit))
+			return 0;
+		udelay(UDELAY_DELAY);
+	}
+	return -ETIMEDOUT;
+}
+
+/* Used to issue init control blocks to hw. Maps control block,
+ * sets address, triggers download, waits for completion.
+ */
+int qlge_write_cfg(struct qlge_adapter *qdev, void *ptr, int size, u32 bit,
+		   u16 q_id)
+{
+	u64 map;
+	int status = 0;
+	int direction;
+	u32 mask;
+	u32 value;
+
+	if (bit & (CFG_LRQ | CFG_LR | CFG_LCQ))
+		direction = DMA_TO_DEVICE;
+	else
+		direction = DMA_FROM_DEVICE;
+
+	map = dma_map_single(&qdev->pdev->dev, ptr, size, direction);
+	if (dma_mapping_error(&qdev->pdev->dev, map)) {
+		netif_err(qdev, ifup, qdev->ndev, "Couldn't map DMA area.\n");
+		return -ENOMEM;
+	}
+
+	status = qlge_sem_spinlock(qdev, SEM_ICB_MASK);
+	if (status)
+		goto lock_failed;
+
+	status = qlge_wait_cfg(qdev, bit);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Timed out waiting for CFG to come ready.\n");
+		goto exit;
+	}
+
+	qlge_write32(qdev, ICB_L, (u32)map);
+	qlge_write32(qdev, ICB_H, (u32)(map >> 32));
+
+	mask = CFG_Q_MASK | (bit << 16);
+	value = bit | (q_id << CFG_Q_SHIFT);
+	qlge_write32(qdev, CFG, (mask | value));
+
+	/*
+	 * Wait for the bit to clear after signaling hw.
+	 */
+	status = qlge_wait_cfg(qdev, bit);
+exit:
+	qlge_sem_unlock(qdev, SEM_ICB_MASK);	/* does flush too */
+lock_failed:
+	dma_unmap_single(&qdev->pdev->dev, map, size, direction);
+	return status;
+}
+
+/* Get a specific MAC address from the CAM.  Used for debug and reg dump. */
+int qlge_get_mac_addr_reg(struct qlge_adapter *qdev, u32 type, u16 index,
+			  u32 *value)
+{
+	u32 offset = 0;
+	int status;
+
+	switch (type) {
+	case MAC_ADDR_TYPE_MULTI_MAC:
+	case MAC_ADDR_TYPE_CAM_MAC: {
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			break;
+		qlge_write32(qdev, MAC_ADDR_IDX,
+			     (offset++) | /* offset */
+				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
+				   MAC_ADDR_ADR | MAC_ADDR_RS |
+				   type); /* type */
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MR, 0);
+		if (status)
+			break;
+		*value++ = qlge_read32(qdev, MAC_ADDR_DATA);
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			break;
+		qlge_write32(qdev, MAC_ADDR_IDX,
+			     (offset++) | /* offset */
+				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
+				   MAC_ADDR_ADR | MAC_ADDR_RS |
+				   type); /* type */
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MR, 0);
+		if (status)
+			break;
+		*value++ = qlge_read32(qdev, MAC_ADDR_DATA);
+		if (type == MAC_ADDR_TYPE_CAM_MAC) {
+			status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX,
+						   MAC_ADDR_MW, 0);
+			if (status)
+				break;
+			qlge_write32(qdev, MAC_ADDR_IDX,
+				     (offset++) | /* offset */
+					   (index
+					    << MAC_ADDR_IDX_SHIFT) | /* index */
+					   MAC_ADDR_ADR |
+					   MAC_ADDR_RS | type); /* type */
+			status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX,
+						   MAC_ADDR_MR, 0);
+			if (status)
+				break;
+			*value++ = qlge_read32(qdev, MAC_ADDR_DATA);
+		}
+		break;
+	}
+	case MAC_ADDR_TYPE_VLAN:
+	case MAC_ADDR_TYPE_MULTI_FLTR:
+	default:
+		netif_crit(qdev, ifup, qdev->ndev,
+			   "Address type %d not yet supported.\n", type);
+		status = -EPERM;
+	}
+	return status;
+}
+
+/* Set up a MAC, multicast or VLAN address for the
+ * inbound frame matching.
+ */
+static int qlge_set_mac_addr_reg(struct qlge_adapter *qdev, const u8 *addr,
+				 u32 type, u16 index)
+{
+	u32 offset = 0;
+	int status = 0;
+
+	switch (type) {
+	case MAC_ADDR_TYPE_MULTI_MAC: {
+		u32 upper = (addr[0] << 8) | addr[1];
+		u32 lower = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) |
+			    (addr[5]);
+
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			break;
+		qlge_write32(qdev, MAC_ADDR_IDX,
+			     (offset++) | (index << MAC_ADDR_IDX_SHIFT) | type |
+				   MAC_ADDR_E);
+		qlge_write32(qdev, MAC_ADDR_DATA, lower);
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			break;
+		qlge_write32(qdev, MAC_ADDR_IDX,
+			     (offset++) | (index << MAC_ADDR_IDX_SHIFT) | type |
+				   MAC_ADDR_E);
+
+		qlge_write32(qdev, MAC_ADDR_DATA, upper);
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		break;
+	}
+	case MAC_ADDR_TYPE_CAM_MAC: {
+		u32 cam_output;
+		u32 upper = (addr[0] << 8) | addr[1];
+		u32 lower = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) |
+			    (addr[5]);
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			break;
+		qlge_write32(qdev, MAC_ADDR_IDX,
+			     (offset++) | /* offset */
+				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
+				   type); /* type */
+		qlge_write32(qdev, MAC_ADDR_DATA, lower);
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			break;
+		qlge_write32(qdev, MAC_ADDR_IDX,
+			     (offset++) | /* offset */
+				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
+				   type); /* type */
+		qlge_write32(qdev, MAC_ADDR_DATA, upper);
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			break;
+		qlge_write32(qdev, MAC_ADDR_IDX,
+			     (offset) | /* offset */
+				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
+				   type); /* type */
+		/* This field should also include the queue id
+		 * and possibly the function id.  Right now we hardcode
+		 * the route field to NIC core.
+		 */
+		cam_output = (CAM_OUT_ROUTE_NIC |
+			      (qdev->func << CAM_OUT_FUNC_SHIFT) |
+			      (0 << CAM_OUT_CQ_ID_SHIFT));
+		if (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)
+			cam_output |= CAM_OUT_RV;
+		/* route to NIC core */
+		qlge_write32(qdev, MAC_ADDR_DATA, cam_output);
+		break;
+	}
+	case MAC_ADDR_TYPE_VLAN: {
+		u32 enable_bit = *((u32 *)&addr[0]);
+		/* For VLAN, the addr actually holds a bit that
+		 * either enables or disables the vlan id we are
+		 * addressing. It's either MAC_ADDR_E on or off.
+		 * That's bit-27 we're talking about.
+		 */
+		status = qlge_wait_reg_rdy(qdev, MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+		if (status)
+			break;
+		qlge_write32(qdev, MAC_ADDR_IDX,
+			     offset | /* offset */
+				   (index << MAC_ADDR_IDX_SHIFT) | /* index */
+				   type | /* type */
+				   enable_bit); /* enable/disable */
+		break;
+	}
+	case MAC_ADDR_TYPE_MULTI_FLTR:
+	default:
+		netif_crit(qdev, ifup, qdev->ndev,
+			   "Address type %d not yet supported.\n", type);
+		status = -EPERM;
+	}
+	return status;
+}
+
+/* Set or clear MAC address in hardware. We sometimes
+ * have to clear it to prevent wrong frame routing
+ * especially in a bonding environment.
+ */
+static int qlge_set_mac_addr(struct qlge_adapter *qdev, int set)
+{
+	int status;
+	char zero_mac_addr[ETH_ALEN];
+	char *addr;
+
+	if (set) {
+		addr = &qdev->current_mac_addr[0];
+		netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+			     "Set Mac addr %pM\n", addr);
+	} else {
+		eth_zero_addr(zero_mac_addr);
+		addr = &zero_mac_addr[0];
+		netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+			     "Clearing MAC address\n");
+	}
+	status = qlge_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+	status = qlge_set_mac_addr_reg(qdev, (const u8 *)addr,
+				       MAC_ADDR_TYPE_CAM_MAC,
+				       qdev->func * MAX_CQ);
+	qlge_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init mac address.\n");
+	return status;
+}
+
+void qlge_link_on(struct qlge_adapter *qdev)
+{
+	netif_err(qdev, link, qdev->ndev, "Link is up.\n");
+	netif_carrier_on(qdev->ndev);
+	qlge_set_mac_addr(qdev, 1);
+}
+
+void qlge_link_off(struct qlge_adapter *qdev)
+{
+	netif_err(qdev, link, qdev->ndev, "Link is down.\n");
+	netif_carrier_off(qdev->ndev);
+	qlge_set_mac_addr(qdev, 0);
+}
+
+/* Get a specific frame routing value from the CAM.
+ * Used for debug and reg dump.
+ */
+int qlge_get_routing_reg(struct qlge_adapter *qdev, u32 index, u32 *value)
+{
+	int status = 0;
+
+	status = qlge_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, 0);
+	if (status)
+		goto exit;
+
+	qlge_write32(qdev, RT_IDX,
+		     RT_IDX_TYPE_NICQ | RT_IDX_RS | (index << RT_IDX_IDX_SHIFT));
+	status = qlge_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MR, 0);
+	if (status)
+		goto exit;
+	*value = qlge_read32(qdev, RT_DATA);
+exit:
+	return status;
+}
+
+/* The NIC function for this chip has 16 routing indexes.  Each one can be used
+ * to route different frame types to various inbound queues.  We send broadcast/
+ * multicast/error frames to the default queue for slow handling,
+ * and CAM hit/RSS frames to the fast handling queues.
+ */
+static int qlge_set_routing_reg(struct qlge_adapter *qdev, u32 index, u32 mask,
+				int enable)
+{
+	int status = -EINVAL; /* Return error if no mask match. */
+	u32 value = 0;
+
+	switch (mask) {
+	case RT_IDX_CAM_HIT:
+		{
+			value = RT_IDX_DST_CAM_Q |	/* dest */
+			    RT_IDX_TYPE_NICQ |	/* type */
+			    (RT_IDX_CAM_HIT_SLOT << RT_IDX_IDX_SHIFT);/* index */
+			break;
+		}
+	case RT_IDX_VALID:	/* Promiscuous Mode frames. */
+		{
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
+			    RT_IDX_TYPE_NICQ |	/* type */
+			    (RT_IDX_PROMISCUOUS_SLOT << RT_IDX_IDX_SHIFT);/* index */
+			break;
+		}
+	case RT_IDX_ERR:	/* Pass up MAC,IP,TCP/UDP error frames. */
+		{
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
+			    RT_IDX_TYPE_NICQ |	/* type */
+			    (RT_IDX_ALL_ERR_SLOT << RT_IDX_IDX_SHIFT);/* index */
+			break;
+		}
+	case RT_IDX_IP_CSUM_ERR: /* Pass up IP CSUM error frames. */
+		{
+			value = RT_IDX_DST_DFLT_Q | /* dest */
+				RT_IDX_TYPE_NICQ | /* type */
+				(RT_IDX_IP_CSUM_ERR_SLOT <<
+				RT_IDX_IDX_SHIFT); /* index */
+			break;
+		}
+	case RT_IDX_TU_CSUM_ERR: /* Pass up TCP/UDP CSUM error frames. */
+		{
+			value = RT_IDX_DST_DFLT_Q | /* dest */
+				RT_IDX_TYPE_NICQ | /* type */
+				(RT_IDX_TCP_UDP_CSUM_ERR_SLOT <<
+				RT_IDX_IDX_SHIFT); /* index */
+			break;
+		}
+	case RT_IDX_BCAST:	/* Pass up Broadcast frames to default Q. */
+		{
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
+			    RT_IDX_TYPE_NICQ |	/* type */
+			    (RT_IDX_BCAST_SLOT << RT_IDX_IDX_SHIFT);/* index */
+			break;
+		}
+	case RT_IDX_MCAST:	/* Pass up All Multicast frames. */
+		{
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
+			    RT_IDX_TYPE_NICQ |	/* type */
+			    (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */
+			break;
+		}
+	case RT_IDX_MCAST_MATCH:	/* Pass up matched Multicast frames. */
+		{
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
+			    RT_IDX_TYPE_NICQ |	/* type */
+			    (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
+			break;
+		}
+	case RT_IDX_RSS_MATCH:	/* Pass up matched RSS frames. */
+		{
+			value = RT_IDX_DST_RSS |	/* dest */
+			    RT_IDX_TYPE_NICQ |	/* type */
+			    (RT_IDX_RSS_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
+			break;
+		}
+	case 0:		/* Clear the E-bit on an entry. */
+		{
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
+			    RT_IDX_TYPE_NICQ |	/* type */
+			    (index << RT_IDX_IDX_SHIFT);/* index */
+			break;
+		}
+	default:
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Mask type %d not yet supported.\n", mask);
+		status = -EPERM;
+		goto exit;
+	}
+
+	if (value) {
+		status = qlge_wait_reg_rdy(qdev, RT_IDX, RT_IDX_MW, 0);
+		if (status)
+			goto exit;
+		value |= (enable ? RT_IDX_E : 0);
+		qlge_write32(qdev, RT_IDX, value);
+		qlge_write32(qdev, RT_DATA, enable ? mask : 0);
+	}
+exit:
+	return status;
+}
+
+static void qlge_enable_interrupts(struct qlge_adapter *qdev)
+{
+	qlge_write32(qdev, INTR_EN, (INTR_EN_EI << 16) | INTR_EN_EI);
+}
+
+static void qlge_disable_interrupts(struct qlge_adapter *qdev)
+{
+	qlge_write32(qdev, INTR_EN, (INTR_EN_EI << 16));
+}
+
+static void qlge_enable_completion_interrupt(struct qlge_adapter *qdev, u32 intr)
+{
+	struct intr_context *ctx = &qdev->intr_context[intr];
+
+	qlge_write32(qdev, INTR_EN, ctx->intr_en_mask);
+}
+
+static void qlge_disable_completion_interrupt(struct qlge_adapter *qdev, u32 intr)
+{
+	struct intr_context *ctx = &qdev->intr_context[intr];
+
+	qlge_write32(qdev, INTR_EN, ctx->intr_dis_mask);
+}
+
+static void qlge_enable_all_completion_interrupts(struct qlge_adapter *qdev)
+{
+	int i;
+
+	for (i = 0; i < qdev->intr_count; i++)
+		qlge_enable_completion_interrupt(qdev, i);
+}
+
+static int qlge_validate_flash(struct qlge_adapter *qdev, u32 size, const char *str)
+{
+	int status, i;
+	u16 csum = 0;
+	__le16 *flash = (__le16 *)&qdev->flash;
+
+	status = strncmp((char *)&qdev->flash, str, 4);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev, "Invalid flash signature.\n");
+		return	status;
+	}
+
+	for (i = 0; i < size; i++)
+		csum += le16_to_cpu(*flash++);
+
+	if (csum)
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Invalid flash checksum, csum = 0x%.04x.\n", csum);
+
+	return csum;
+}
+
+static int qlge_read_flash_word(struct qlge_adapter *qdev, int offset, __le32 *data)
+{
+	int status = 0;
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev,
+				   FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
+	if (status)
+		goto exit;
+	/* set up for reg read */
+	qlge_write32(qdev, FLASH_ADDR, FLASH_ADDR_R | offset);
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev,
+				   FLASH_ADDR, FLASH_ADDR_RDY, FLASH_ADDR_ERR);
+	if (status)
+		goto exit;
+	/* This data is stored on flash as an array of
+	 * __le32.  Since qlge_read32() returns cpu endian
+	 * we need to swap it back.
+	 */
+	*data = cpu_to_le32(qlge_read32(qdev, FLASH_DATA));
+exit:
+	return status;
+}
+
+static int qlge_get_8000_flash_params(struct qlge_adapter *qdev)
+{
+	u32 i, size;
+	int status;
+	__le32 *p = (__le32 *)&qdev->flash;
+	u32 offset;
+	u8 mac_addr[6];
+
+	/* Get flash offset for function and adjust
+	 * for dword access.
+	 */
+	if (!qdev->port)
+		offset = FUNC0_FLASH_OFFSET / sizeof(u32);
+	else
+		offset = FUNC1_FLASH_OFFSET / sizeof(u32);
+
+	if (qlge_sem_spinlock(qdev, SEM_FLASH_MASK))
+		return -ETIMEDOUT;
+
+	size = sizeof(struct flash_params_8000) / sizeof(u32);
+	for (i = 0; i < size; i++, p++) {
+		status = qlge_read_flash_word(qdev, i + offset, p);
+		if (status) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Error reading flash.\n");
+			goto exit;
+		}
+	}
+
+	status = qlge_validate_flash(qdev,
+				     sizeof(struct flash_params_8000) /
+				   sizeof(u16),
+				   "8000");
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev, "Invalid flash.\n");
+		status = -EINVAL;
+		goto exit;
+	}
+
+	/* Extract either manufacturer or BOFM modified
+	 * MAC address.
+	 */
+	if (qdev->flash.flash_params_8000.data_type1 == 2)
+		memcpy(mac_addr,
+		       qdev->flash.flash_params_8000.mac_addr1,
+		       qdev->ndev->addr_len);
+	else
+		memcpy(mac_addr,
+		       qdev->flash.flash_params_8000.mac_addr,
+		       qdev->ndev->addr_len);
+
+	if (!is_valid_ether_addr(mac_addr)) {
+		netif_err(qdev, ifup, qdev->ndev, "Invalid MAC address.\n");
+		status = -EINVAL;
+		goto exit;
+	}
+
+	eth_hw_addr_set(qdev->ndev, mac_addr);
+
+exit:
+	qlge_sem_unlock(qdev, SEM_FLASH_MASK);
+	return status;
+}
+
+static int qlge_get_8012_flash_params(struct qlge_adapter *qdev)
+{
+	int i;
+	int status;
+	__le32 *p = (__le32 *)&qdev->flash;
+	u32 offset = 0;
+	u32 size = sizeof(struct flash_params_8012) / sizeof(u32);
+
+	/* Second function's parameters follow the first
+	 * function's.
+	 */
+	if (qdev->port)
+		offset = size;
+
+	if (qlge_sem_spinlock(qdev, SEM_FLASH_MASK))
+		return -ETIMEDOUT;
+
+	for (i = 0; i < size; i++, p++) {
+		status = qlge_read_flash_word(qdev, i + offset, p);
+		if (status) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Error reading flash.\n");
+			goto exit;
+		}
+	}
+
+	status = qlge_validate_flash(qdev,
+				     sizeof(struct flash_params_8012) /
+				       sizeof(u16),
+				     "8012");
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev, "Invalid flash.\n");
+		status = -EINVAL;
+		goto exit;
+	}
+
+	if (!is_valid_ether_addr(qdev->flash.flash_params_8012.mac_addr)) {
+		status = -EINVAL;
+		goto exit;
+	}
+
+	eth_hw_addr_set(qdev->ndev, qdev->flash.flash_params_8012.mac_addr);
+
+exit:
+	qlge_sem_unlock(qdev, SEM_FLASH_MASK);
+	return status;
+}
+
+/* xgmac register are located behind the xgmac_addr and xgmac_data
+ * register pair.  Each read/write requires us to wait for the ready
+ * bit before reading/writing the data.
+ */
+static int qlge_write_xgmac_reg(struct qlge_adapter *qdev, u32 reg, u32 data)
+{
+	int status;
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev,
+				   XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
+	if (status)
+		return status;
+	/* write the data to the data reg */
+	qlge_write32(qdev, XGMAC_DATA, data);
+	/* trigger the write */
+	qlge_write32(qdev, XGMAC_ADDR, reg);
+	return status;
+}
+
+/* xgmac register are located behind the xgmac_addr and xgmac_data
+ * register pair.  Each read/write requires us to wait for the ready
+ * bit before reading/writing the data.
+ */
+int qlge_read_xgmac_reg(struct qlge_adapter *qdev, u32 reg, u32 *data)
+{
+	int status = 0;
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev,
+				   XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
+	if (status)
+		goto exit;
+	/* set up for reg read */
+	qlge_write32(qdev, XGMAC_ADDR, reg | XGMAC_ADDR_R);
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev,
+				   XGMAC_ADDR, XGMAC_ADDR_RDY, XGMAC_ADDR_XME);
+	if (status)
+		goto exit;
+	/* get the data */
+	*data = qlge_read32(qdev, XGMAC_DATA);
+exit:
+	return status;
+}
+
+/* This is used for reading the 64-bit statistics regs. */
+int qlge_read_xgmac_reg64(struct qlge_adapter *qdev, u32 reg, u64 *data)
+{
+	int status = 0;
+	u32 hi = 0;
+	u32 lo = 0;
+
+	status = qlge_read_xgmac_reg(qdev, reg, &lo);
+	if (status)
+		goto exit;
+
+	status = qlge_read_xgmac_reg(qdev, reg + 4, &hi);
+	if (status)
+		goto exit;
+
+	*data = (u64)lo | ((u64)hi << 32);
+
+exit:
+	return status;
+}
+
+static int qlge_8000_port_initialize(struct qlge_adapter *qdev)
+{
+	int status;
+	/*
+	 * Get MPI firmware version for driver banner
+	 * and ethool info.
+	 */
+	status = qlge_mb_about_fw(qdev);
+	if (status)
+		goto exit;
+	status = qlge_mb_get_fw_state(qdev);
+	if (status)
+		goto exit;
+	/* Wake up a worker to get/set the TX/RX frame sizes. */
+	queue_delayed_work(qdev->workqueue, &qdev->mpi_port_cfg_work, 0);
+exit:
+	return status;
+}
+
+/* Take the MAC Core out of reset.
+ * Enable statistics counting.
+ * Take the transmitter/receiver out of reset.
+ * This functionality may be done in the MPI firmware at a
+ * later date.
+ */
+static int qlge_8012_port_initialize(struct qlge_adapter *qdev)
+{
+	int status = 0;
+	u32 data;
+
+	if (qlge_sem_trylock(qdev, qdev->xg_sem_mask)) {
+		/* Another function has the semaphore, so
+		 * wait for the port init bit to come ready.
+		 */
+		netif_info(qdev, link, qdev->ndev,
+			   "Another function has the semaphore, so wait for the port init bit to come ready.\n");
+		status = qlge_wait_reg_rdy(qdev, STS, qdev->port_init, 0);
+		if (status) {
+			netif_crit(qdev, link, qdev->ndev,
+				   "Port initialize timed out.\n");
+		}
+		return status;
+	}
+
+	netif_info(qdev, link, qdev->ndev, "Got xgmac semaphore!.\n");
+	/* Set the core reset. */
+	status = qlge_read_xgmac_reg(qdev, GLOBAL_CFG, &data);
+	if (status)
+		goto end;
+	data |= GLOBAL_CFG_RESET;
+	status = qlge_write_xgmac_reg(qdev, GLOBAL_CFG, data);
+	if (status)
+		goto end;
+
+	/* Clear the core reset and turn on jumbo for receiver. */
+	data &= ~GLOBAL_CFG_RESET;	/* Clear core reset. */
+	data |= GLOBAL_CFG_JUMBO;	/* Turn on jumbo. */
+	data |= GLOBAL_CFG_TX_STAT_EN;
+	data |= GLOBAL_CFG_RX_STAT_EN;
+	status = qlge_write_xgmac_reg(qdev, GLOBAL_CFG, data);
+	if (status)
+		goto end;
+
+	/* Enable transmitter, and clear it's reset. */
+	status = qlge_read_xgmac_reg(qdev, TX_CFG, &data);
+	if (status)
+		goto end;
+	data &= ~TX_CFG_RESET;	/* Clear the TX MAC reset. */
+	data |= TX_CFG_EN;	/* Enable the transmitter. */
+	status = qlge_write_xgmac_reg(qdev, TX_CFG, data);
+	if (status)
+		goto end;
+
+	/* Enable receiver and clear it's reset. */
+	status = qlge_read_xgmac_reg(qdev, RX_CFG, &data);
+	if (status)
+		goto end;
+	data &= ~RX_CFG_RESET;	/* Clear the RX MAC reset. */
+	data |= RX_CFG_EN;	/* Enable the receiver. */
+	status = qlge_write_xgmac_reg(qdev, RX_CFG, data);
+	if (status)
+		goto end;
+
+	/* Turn on jumbo. */
+	status =
+	    qlge_write_xgmac_reg(qdev, MAC_TX_PARAMS, MAC_TX_PARAMS_JUMBO | (0x2580 << 16));
+	if (status)
+		goto end;
+	status =
+	    qlge_write_xgmac_reg(qdev, MAC_RX_PARAMS, 0x2580);
+	if (status)
+		goto end;
+
+	/* Signal to the world that the port is enabled.        */
+	qlge_write32(qdev, STS, ((qdev->port_init << 16) | qdev->port_init));
+end:
+	qlge_sem_unlock(qdev, qdev->xg_sem_mask);
+	return status;
+}
+
+static inline unsigned int qlge_lbq_block_size(struct qlge_adapter *qdev)
+{
+	return PAGE_SIZE << qdev->lbq_buf_order;
+}
+
+static struct qlge_bq_desc *qlge_get_curr_buf(struct qlge_bq *bq)
+{
+	struct qlge_bq_desc *bq_desc;
+
+	bq_desc = &bq->queue[bq->next_to_clean];
+	bq->next_to_clean = QLGE_BQ_WRAP(bq->next_to_clean + 1);
+
+	return bq_desc;
+}
+
+static struct qlge_bq_desc *qlge_get_curr_lchunk(struct qlge_adapter *qdev,
+						 struct rx_ring *rx_ring)
+{
+	struct qlge_bq_desc *lbq_desc = qlge_get_curr_buf(&rx_ring->lbq);
+
+	dma_sync_single_for_cpu(&qdev->pdev->dev, lbq_desc->dma_addr,
+				qdev->lbq_buf_size, DMA_FROM_DEVICE);
+
+	if ((lbq_desc->p.pg_chunk.offset + qdev->lbq_buf_size) ==
+	    qlge_lbq_block_size(qdev)) {
+		/* last chunk of the master page */
+		dma_unmap_page(&qdev->pdev->dev, lbq_desc->dma_addr,
+			       qlge_lbq_block_size(qdev), DMA_FROM_DEVICE);
+	}
+
+	return lbq_desc;
+}
+
+/* Update an rx ring index. */
+static void qlge_update_cq(struct rx_ring *rx_ring)
+{
+	rx_ring->cnsmr_idx++;
+	rx_ring->curr_entry++;
+	if (unlikely(rx_ring->cnsmr_idx == rx_ring->cq_len)) {
+		rx_ring->cnsmr_idx = 0;
+		rx_ring->curr_entry = rx_ring->cq_base;
+	}
+}
+
+static void qlge_write_cq_idx(struct rx_ring *rx_ring)
+{
+	qlge_write_db_reg(rx_ring->cnsmr_idx, rx_ring->cnsmr_idx_db_reg);
+}
+
+static const char * const bq_type_name[] = {
+	[QLGE_SB] = "sbq",
+	[QLGE_LB] = "lbq",
+};
+
+/* return 0 or negative error */
+static int qlge_refill_sb(struct rx_ring *rx_ring,
+			  struct qlge_bq_desc *sbq_desc, gfp_t gfp)
+{
+	struct qlge_adapter *qdev = rx_ring->qdev;
+	struct sk_buff *skb;
+
+	if (sbq_desc->p.skb)
+		return 0;
+
+	netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+		     "ring %u sbq: getting new skb for index %d.\n",
+		     rx_ring->cq_id, sbq_desc->index);
+
+	skb = __netdev_alloc_skb(qdev->ndev, SMALL_BUFFER_SIZE, gfp);
+	if (!skb)
+		return -ENOMEM;
+	skb_reserve(skb, QLGE_SB_PAD);
+
+	sbq_desc->dma_addr = dma_map_single(&qdev->pdev->dev, skb->data,
+					    SMALL_BUF_MAP_SIZE,
+					    DMA_FROM_DEVICE);
+	if (dma_mapping_error(&qdev->pdev->dev, sbq_desc->dma_addr)) {
+		netif_err(qdev, ifup, qdev->ndev, "PCI mapping failed.\n");
+		dev_kfree_skb_any(skb);
+		return -EIO;
+	}
+	*sbq_desc->buf_ptr = cpu_to_le64(sbq_desc->dma_addr);
+
+	sbq_desc->p.skb = skb;
+	return 0;
+}
+
+/* return 0 or negative error */
+static int qlge_refill_lb(struct rx_ring *rx_ring,
+			  struct qlge_bq_desc *lbq_desc, gfp_t gfp)
+{
+	struct qlge_adapter *qdev = rx_ring->qdev;
+	struct qlge_page_chunk *master_chunk = &rx_ring->master_chunk;
+
+	if (!master_chunk->page) {
+		struct page *page;
+		dma_addr_t dma_addr;
+
+		page = alloc_pages(gfp | __GFP_COMP, qdev->lbq_buf_order);
+		if (unlikely(!page))
+			return -ENOMEM;
+		dma_addr = dma_map_page(&qdev->pdev->dev, page, 0,
+					qlge_lbq_block_size(qdev),
+					DMA_FROM_DEVICE);
+		if (dma_mapping_error(&qdev->pdev->dev, dma_addr)) {
+			__free_pages(page, qdev->lbq_buf_order);
+			netif_err(qdev, drv, qdev->ndev,
+				  "PCI mapping failed.\n");
+			return -EIO;
+		}
+		master_chunk->page = page;
+		master_chunk->va = page_address(page);
+		master_chunk->offset = 0;
+		rx_ring->chunk_dma_addr = dma_addr;
+	}
+
+	lbq_desc->p.pg_chunk = *master_chunk;
+	lbq_desc->dma_addr = rx_ring->chunk_dma_addr;
+	*lbq_desc->buf_ptr = cpu_to_le64(lbq_desc->dma_addr +
+					 lbq_desc->p.pg_chunk.offset);
+
+	/* Adjust the master page chunk for next
+	 * buffer get.
+	 */
+	master_chunk->offset += qdev->lbq_buf_size;
+	if (master_chunk->offset == qlge_lbq_block_size(qdev)) {
+		master_chunk->page = NULL;
+	} else {
+		master_chunk->va += qdev->lbq_buf_size;
+		get_page(master_chunk->page);
+	}
+
+	return 0;
+}
+
+/* return 0 or negative error */
+static int qlge_refill_bq(struct qlge_bq *bq, gfp_t gfp)
+{
+	struct rx_ring *rx_ring = QLGE_BQ_CONTAINER(bq);
+	struct qlge_adapter *qdev = rx_ring->qdev;
+	struct qlge_bq_desc *bq_desc;
+	int refill_count;
+	int retval;
+	int i;
+
+	refill_count = QLGE_BQ_WRAP(QLGE_BQ_ALIGN(bq->next_to_clean - 1) -
+				    bq->next_to_use);
+	if (!refill_count)
+		return 0;
+
+	i = bq->next_to_use;
+	bq_desc = &bq->queue[i];
+	i -= QLGE_BQ_LEN;
+	do {
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "ring %u %s: try cleaning idx %d\n",
+			     rx_ring->cq_id, bq_type_name[bq->type], i);
+
+		if (bq->type == QLGE_SB)
+			retval = qlge_refill_sb(rx_ring, bq_desc, gfp);
+		else
+			retval = qlge_refill_lb(rx_ring, bq_desc, gfp);
+		if (retval < 0) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "ring %u %s: Could not get a page chunk, idx %d\n",
+				  rx_ring->cq_id, bq_type_name[bq->type], i);
+			break;
+		}
+
+		bq_desc++;
+		i++;
+		if (unlikely(!i)) {
+			bq_desc = &bq->queue[0];
+			i -= QLGE_BQ_LEN;
+		}
+		refill_count--;
+	} while (refill_count);
+	i += QLGE_BQ_LEN;
+
+	if (bq->next_to_use != i) {
+		if (QLGE_BQ_ALIGN(bq->next_to_use) != QLGE_BQ_ALIGN(i)) {
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "ring %u %s: updating prod idx = %d.\n",
+				     rx_ring->cq_id, bq_type_name[bq->type],
+				     i);
+			qlge_write_db_reg(i, bq->prod_idx_db_reg);
+		}
+		bq->next_to_use = i;
+	}
+
+	return retval;
+}
+
+static void qlge_update_buffer_queues(struct rx_ring *rx_ring, gfp_t gfp,
+				      unsigned long delay)
+{
+	bool sbq_fail, lbq_fail;
+
+	sbq_fail = !!qlge_refill_bq(&rx_ring->sbq, gfp);
+	lbq_fail = !!qlge_refill_bq(&rx_ring->lbq, gfp);
+
+	/* Minimum number of buffers needed to be able to receive at least one
+	 * frame of any format:
+	 * sbq: 1 for header + 1 for data
+	 * lbq: mtu 9000 / lb size
+	 * Below this, the queue might stall.
+	 */
+	if ((sbq_fail && QLGE_BQ_HW_OWNED(&rx_ring->sbq) < 2) ||
+	    (lbq_fail && QLGE_BQ_HW_OWNED(&rx_ring->lbq) <
+	     DIV_ROUND_UP(9000, LARGE_BUFFER_MAX_SIZE)))
+		/* Allocations can take a long time in certain cases (ex.
+		 * reclaim). Therefore, use a workqueue for long-running
+		 * work items.
+		 */
+		queue_delayed_work_on(smp_processor_id(), system_long_wq,
+				      &rx_ring->refill_work, delay);
+}
+
+static void qlge_slow_refill(struct work_struct *work)
+{
+	struct rx_ring *rx_ring = container_of(work, struct rx_ring,
+					       refill_work.work);
+	struct napi_struct *napi = &rx_ring->napi;
+
+	napi_disable(napi);
+	qlge_update_buffer_queues(rx_ring, GFP_KERNEL, HZ / 2);
+	napi_enable(napi);
+
+	local_bh_disable();
+	/* napi_disable() might have prevented incomplete napi work from being
+	 * rescheduled.
+	 */
+	napi_schedule(napi);
+	/* trigger softirq processing */
+	local_bh_enable();
+}
+
+/* Unmaps tx buffers.  Can be called from send() if a pci mapping
+ * fails at some stage, or from the interrupt when a tx completes.
+ */
+static void qlge_unmap_send(struct qlge_adapter *qdev,
+			    struct tx_ring_desc *tx_ring_desc, int mapped)
+{
+	int i;
+
+	for (i = 0; i < mapped; i++) {
+		if (i == 0 || (i == 7 && mapped > 7)) {
+			/*
+			 * Unmap the skb->data area, or the
+			 * external sglist (AKA the Outbound
+			 * Address List (OAL)).
+			 * If its the zeroeth element, then it's
+			 * the skb->data area.  If it's the 7th
+			 * element and there is more than 6 frags,
+			 * then its an OAL.
+			 */
+			if (i == 7) {
+				netif_printk(qdev, tx_done, KERN_DEBUG,
+					     qdev->ndev,
+					     "unmapping OAL area.\n");
+			}
+			dma_unmap_single(&qdev->pdev->dev,
+					 dma_unmap_addr(&tx_ring_desc->map[i],
+							mapaddr),
+					 dma_unmap_len(&tx_ring_desc->map[i],
+						       maplen),
+					 DMA_TO_DEVICE);
+		} else {
+			netif_printk(qdev, tx_done, KERN_DEBUG, qdev->ndev,
+				     "unmapping frag %d.\n", i);
+			dma_unmap_page(&qdev->pdev->dev,
+				       dma_unmap_addr(&tx_ring_desc->map[i],
+						      mapaddr),
+				       dma_unmap_len(&tx_ring_desc->map[i],
+						     maplen), DMA_TO_DEVICE);
+		}
+	}
+}
+
+/* Map the buffers for this transmit.  This will return
+ * NETDEV_TX_BUSY or NETDEV_TX_OK based on success.
+ */
+static int qlge_map_send(struct qlge_adapter *qdev,
+			 struct qlge_ob_mac_iocb_req *mac_iocb_ptr,
+			 struct sk_buff *skb, struct tx_ring_desc *tx_ring_desc)
+{
+	int len = skb_headlen(skb);
+	dma_addr_t map;
+	int frag_idx, err, map_idx = 0;
+	struct tx_buf_desc *tbd = mac_iocb_ptr->tbd;
+	int frag_cnt = skb_shinfo(skb)->nr_frags;
+
+	if (frag_cnt) {
+		netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev,
+			     "frag_cnt = %d.\n", frag_cnt);
+	}
+	/*
+	 * Map the skb buffer first.
+	 */
+	map = dma_map_single(&qdev->pdev->dev, skb->data, len, DMA_TO_DEVICE);
+
+	err = dma_mapping_error(&qdev->pdev->dev, map);
+	if (err) {
+		netif_err(qdev, tx_queued, qdev->ndev,
+			  "PCI mapping failed with error: %d\n", err);
+
+		return NETDEV_TX_BUSY;
+	}
+
+	tbd->len = cpu_to_le32(len);
+	tbd->addr = cpu_to_le64(map);
+	dma_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map);
+	dma_unmap_len_set(&tx_ring_desc->map[map_idx], maplen, len);
+	map_idx++;
+
+	/*
+	 * This loop fills the remainder of the 8 address descriptors
+	 * in the IOCB.  If there are more than 7 fragments, then the
+	 * eighth address desc will point to an external list (OAL).
+	 * When this happens, the remainder of the frags will be stored
+	 * in this list.
+	 */
+	for (frag_idx = 0; frag_idx < frag_cnt; frag_idx++, map_idx++) {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_idx];
+
+		tbd++;
+		if (frag_idx == 6 && frag_cnt > 7) {
+			/* Let's tack on an sglist.
+			 * Our control block will now
+			 * look like this:
+			 * iocb->seg[0] = skb->data
+			 * iocb->seg[1] = frag[0]
+			 * iocb->seg[2] = frag[1]
+			 * iocb->seg[3] = frag[2]
+			 * iocb->seg[4] = frag[3]
+			 * iocb->seg[5] = frag[4]
+			 * iocb->seg[6] = frag[5]
+			 * iocb->seg[7] = ptr to OAL (external sglist)
+			 * oal->seg[0] = frag[6]
+			 * oal->seg[1] = frag[7]
+			 * oal->seg[2] = frag[8]
+			 * oal->seg[3] = frag[9]
+			 * oal->seg[4] = frag[10]
+			 *      etc...
+			 */
+			/* Tack on the OAL in the eighth segment of IOCB. */
+			map = dma_map_single(&qdev->pdev->dev, &tx_ring_desc->oal,
+					     sizeof(struct qlge_oal),
+					     DMA_TO_DEVICE);
+			err = dma_mapping_error(&qdev->pdev->dev, map);
+			if (err) {
+				netif_err(qdev, tx_queued, qdev->ndev,
+					  "PCI mapping outbound address list with error: %d\n",
+					  err);
+				goto map_error;
+			}
+
+			tbd->addr = cpu_to_le64(map);
+			/*
+			 * The length is the number of fragments
+			 * that remain to be mapped times the length
+			 * of our sglist (OAL).
+			 */
+			tbd->len =
+			    cpu_to_le32((sizeof(struct tx_buf_desc) *
+					 (frag_cnt - frag_idx)) | TX_DESC_C);
+			dma_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr,
+					   map);
+			dma_unmap_len_set(&tx_ring_desc->map[map_idx], maplen,
+					  sizeof(struct qlge_oal));
+			tbd = (struct tx_buf_desc *)&tx_ring_desc->oal;
+			map_idx++;
+		}
+
+		map = skb_frag_dma_map(&qdev->pdev->dev, frag, 0, skb_frag_size(frag),
+				       DMA_TO_DEVICE);
+
+		err = dma_mapping_error(&qdev->pdev->dev, map);
+		if (err) {
+			netif_err(qdev, tx_queued, qdev->ndev,
+				  "PCI mapping frags failed with error: %d.\n",
+				  err);
+			goto map_error;
+		}
+
+		tbd->addr = cpu_to_le64(map);
+		tbd->len = cpu_to_le32(skb_frag_size(frag));
+		dma_unmap_addr_set(&tx_ring_desc->map[map_idx], mapaddr, map);
+		dma_unmap_len_set(&tx_ring_desc->map[map_idx], maplen,
+				  skb_frag_size(frag));
+	}
+	/* Save the number of segments we've mapped. */
+	tx_ring_desc->map_cnt = map_idx;
+	/* Terminate the last segment. */
+	tbd->len = cpu_to_le32(le32_to_cpu(tbd->len) | TX_DESC_E);
+	return NETDEV_TX_OK;
+
+map_error:
+	/*
+	 * If the first frag mapping failed, then i will be zero.
+	 * This causes the unmap of the skb->data area.  Otherwise
+	 * we pass in the number of frags that mapped successfully
+	 * so they can be umapped.
+	 */
+	qlge_unmap_send(qdev, tx_ring_desc, map_idx);
+	return NETDEV_TX_BUSY;
+}
+
+/* Categorizing receive firmware frame errors */
+static void qlge_categorize_rx_err(struct qlge_adapter *qdev, u8 rx_err,
+				   struct rx_ring *rx_ring)
+{
+	struct nic_stats *stats = &qdev->nic_stats;
+
+	stats->rx_err_count++;
+	rx_ring->rx_errors++;
+
+	switch (rx_err & IB_MAC_IOCB_RSP_ERR_MASK) {
+	case IB_MAC_IOCB_RSP_ERR_CODE_ERR:
+		stats->rx_code_err++;
+		break;
+	case IB_MAC_IOCB_RSP_ERR_OVERSIZE:
+		stats->rx_oversize_err++;
+		break;
+	case IB_MAC_IOCB_RSP_ERR_UNDERSIZE:
+		stats->rx_undersize_err++;
+		break;
+	case IB_MAC_IOCB_RSP_ERR_PREAMBLE:
+		stats->rx_preamble_err++;
+		break;
+	case IB_MAC_IOCB_RSP_ERR_FRAME_LEN:
+		stats->rx_frame_len_err++;
+		break;
+	case IB_MAC_IOCB_RSP_ERR_CRC:
+		stats->rx_crc_err++;
+		break;
+	default:
+		break;
+	}
+}
+
+/*
+ * qlge_update_mac_hdr_len - helper routine to update the mac header length
+ * based on vlan tags if present
+ */
+static void qlge_update_mac_hdr_len(struct qlge_adapter *qdev,
+				    struct qlge_ib_mac_iocb_rsp *ib_mac_rsp,
+				    void *page, size_t *len)
+{
+	u16 *tags;
+
+	if (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)
+		return;
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) {
+		tags = (u16 *)page;
+		/* Look for stacked vlan tags in ethertype field */
+		if (tags[6] == ETH_P_8021Q &&
+		    tags[8] == ETH_P_8021Q)
+			*len += 2 * VLAN_HLEN;
+		else
+			*len += VLAN_HLEN;
+	}
+}
+
+/* Process an inbound completion from an rx ring. */
+static void qlge_process_mac_rx_gro_page(struct qlge_adapter *qdev,
+					 struct rx_ring *rx_ring,
+					 struct qlge_ib_mac_iocb_rsp *ib_mac_rsp,
+					 u32 length, u16 vlan_id)
+{
+	struct sk_buff *skb;
+	struct qlge_bq_desc *lbq_desc = qlge_get_curr_lchunk(qdev, rx_ring);
+	struct napi_struct *napi = &rx_ring->napi;
+
+	/* Frame error, so drop the packet. */
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+		qlge_categorize_rx_err(qdev, ib_mac_rsp->flags2, rx_ring);
+		put_page(lbq_desc->p.pg_chunk.page);
+		return;
+	}
+	napi->dev = qdev->ndev;
+
+	skb = napi_get_frags(napi);
+	if (!skb) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Couldn't get an skb, exiting.\n");
+		rx_ring->rx_dropped++;
+		put_page(lbq_desc->p.pg_chunk.page);
+		return;
+	}
+	prefetch(lbq_desc->p.pg_chunk.va);
+	__skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
+			     lbq_desc->p.pg_chunk.page,
+			     lbq_desc->p.pg_chunk.offset,
+			     length);
+
+	skb->len += length;
+	skb->data_len += length;
+	skb->truesize += length;
+	skb_shinfo(skb)->nr_frags++;
+
+	rx_ring->rx_packets++;
+	rx_ring->rx_bytes += length;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	skb_record_rx_queue(skb, rx_ring->cq_id);
+	if (vlan_id != 0xffff)
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
+	napi_gro_frags(napi);
+}
+
+/* Process an inbound completion from an rx ring. */
+static void qlge_process_mac_rx_page(struct qlge_adapter *qdev,
+				     struct rx_ring *rx_ring,
+				     struct qlge_ib_mac_iocb_rsp *ib_mac_rsp,
+				     u32 length, u16 vlan_id)
+{
+	struct net_device *ndev = qdev->ndev;
+	struct sk_buff *skb = NULL;
+	void *addr;
+	struct qlge_bq_desc *lbq_desc = qlge_get_curr_lchunk(qdev, rx_ring);
+	struct napi_struct *napi = &rx_ring->napi;
+	size_t hlen = ETH_HLEN;
+
+	skb = netdev_alloc_skb(ndev, length);
+	if (!skb) {
+		rx_ring->rx_dropped++;
+		put_page(lbq_desc->p.pg_chunk.page);
+		return;
+	}
+
+	addr = lbq_desc->p.pg_chunk.va;
+	prefetch(addr);
+
+	/* Frame error, so drop the packet. */
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+		qlge_categorize_rx_err(qdev, ib_mac_rsp->flags2, rx_ring);
+		goto err_out;
+	}
+
+	/* Update the MAC header length*/
+	qlge_update_mac_hdr_len(qdev, ib_mac_rsp, addr, &hlen);
+
+	/* The max framesize filter on this chip is set higher than
+	 * MTU since FCoE uses 2k frames.
+	 */
+	if (skb->len > ndev->mtu + hlen) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Segment too small, dropping.\n");
+		rx_ring->rx_dropped++;
+		goto err_out;
+	}
+	skb_put_data(skb, addr, hlen);
+	netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+		     "%d bytes of headers and data in large. Chain page to new skb and pull tail.\n",
+		     length);
+	skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
+			   lbq_desc->p.pg_chunk.offset + hlen, length - hlen);
+	skb->len += length - hlen;
+	skb->data_len += length - hlen;
+	skb->truesize += length - hlen;
+
+	rx_ring->rx_packets++;
+	rx_ring->rx_bytes += skb->len;
+	skb->protocol = eth_type_trans(skb, ndev);
+	skb_checksum_none_assert(skb);
+
+	if ((ndev->features & NETIF_F_RXCSUM) &&
+	    !(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
+		/* TCP frame. */
+		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "TCP checksum done!\n");
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
+			   (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
+			/* Unfragmented ipv4 UDP frame. */
+			struct iphdr *iph =
+				(struct iphdr *)((u8 *)addr + hlen);
+			if (!(iph->frag_off &
+			      htons(IP_MF | IP_OFFSET))) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				netif_printk(qdev, rx_status, KERN_DEBUG,
+					     qdev->ndev,
+					     "UDP checksum done!\n");
+			}
+		}
+	}
+
+	skb_record_rx_queue(skb, rx_ring->cq_id);
+	if (vlan_id != 0xffff)
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
+	if (skb->ip_summed == CHECKSUM_UNNECESSARY)
+		napi_gro_receive(napi, skb);
+	else
+		netif_receive_skb(skb);
+	return;
+err_out:
+	dev_kfree_skb_any(skb);
+	put_page(lbq_desc->p.pg_chunk.page);
+}
+
+/* Process an inbound completion from an rx ring. */
+static void qlge_process_mac_rx_skb(struct qlge_adapter *qdev,
+				    struct rx_ring *rx_ring,
+				    struct qlge_ib_mac_iocb_rsp *ib_mac_rsp,
+				    u32 length, u16 vlan_id)
+{
+	struct qlge_bq_desc *sbq_desc = qlge_get_curr_buf(&rx_ring->sbq);
+	struct net_device *ndev = qdev->ndev;
+	struct sk_buff *skb, *new_skb;
+
+	skb = sbq_desc->p.skb;
+	/* Allocate new_skb and copy */
+	new_skb = netdev_alloc_skb(qdev->ndev, length + NET_IP_ALIGN);
+	if (!new_skb) {
+		rx_ring->rx_dropped++;
+		return;
+	}
+	skb_reserve(new_skb, NET_IP_ALIGN);
+
+	dma_sync_single_for_cpu(&qdev->pdev->dev, sbq_desc->dma_addr,
+				SMALL_BUF_MAP_SIZE, DMA_FROM_DEVICE);
+
+	skb_put_data(new_skb, skb->data, length);
+
+	skb = new_skb;
+
+	/* Frame error, so drop the packet. */
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+		qlge_categorize_rx_err(qdev, ib_mac_rsp->flags2, rx_ring);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/* loopback self test for ethtool */
+	if (test_bit(QL_SELFTEST, &qdev->flags)) {
+		qlge_check_lb_frame(qdev, skb);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/* The max framesize filter on this chip is set higher than
+	 * MTU since FCoE uses 2k frames.
+	 */
+	if (skb->len > ndev->mtu + ETH_HLEN) {
+		dev_kfree_skb_any(skb);
+		rx_ring->rx_dropped++;
+		return;
+	}
+
+	prefetch(skb->data);
+	if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "%s Multicast.\n",
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_HASH ? "Hash" :
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_REG ? "Registered" :
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
+	}
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P)
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "Promiscuous Packet.\n");
+
+	rx_ring->rx_packets++;
+	rx_ring->rx_bytes += skb->len;
+	skb->protocol = eth_type_trans(skb, ndev);
+	skb_checksum_none_assert(skb);
+
+	/* If rx checksum is on, and there are no
+	 * csum or frame errors.
+	 */
+	if ((ndev->features & NETIF_F_RXCSUM) &&
+	    !(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
+		/* TCP frame. */
+		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "TCP checksum done!\n");
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
+			   (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
+			/* Unfragmented ipv4 UDP frame. */
+			struct iphdr *iph = (struct iphdr *)skb->data;
+
+			if (!(iph->frag_off &
+			      htons(IP_MF | IP_OFFSET))) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				netif_printk(qdev, rx_status, KERN_DEBUG,
+					     qdev->ndev,
+					     "UDP checksum done!\n");
+			}
+		}
+	}
+
+	skb_record_rx_queue(skb, rx_ring->cq_id);
+	if (vlan_id != 0xffff)
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
+	if (skb->ip_summed == CHECKSUM_UNNECESSARY)
+		napi_gro_receive(&rx_ring->napi, skb);
+	else
+		netif_receive_skb(skb);
+}
+
+static void qlge_realign_skb(struct sk_buff *skb, int len)
+{
+	void *temp_addr = skb->data;
+
+	/* Undo the skb_reserve(skb,32) we did before
+	 * giving to hardware, and realign data on
+	 * a 2-byte boundary.
+	 */
+	skb->data -= QLGE_SB_PAD - NET_IP_ALIGN;
+	skb->tail -= QLGE_SB_PAD - NET_IP_ALIGN;
+	memmove(skb->data, temp_addr, len);
+}
+
+/*
+ * This function builds an skb for the given inbound
+ * completion.  It will be rewritten for readability in the near
+ * future, but for not it works well.
+ */
+static struct sk_buff *qlge_build_rx_skb(struct qlge_adapter *qdev,
+					 struct rx_ring *rx_ring,
+					 struct qlge_ib_mac_iocb_rsp *ib_mac_rsp)
+{
+	u32 length = le32_to_cpu(ib_mac_rsp->data_len);
+	u32 hdr_len = le32_to_cpu(ib_mac_rsp->hdr_len);
+	struct qlge_bq_desc *lbq_desc, *sbq_desc;
+	struct sk_buff *skb = NULL;
+	size_t hlen = ETH_HLEN;
+
+	/*
+	 * Handle the header buffer if present.
+	 */
+	if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV &&
+	    ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "Header of %d bytes in small buffer.\n", hdr_len);
+		/*
+		 * Headers fit nicely into a small buffer.
+		 */
+		sbq_desc = qlge_get_curr_buf(&rx_ring->sbq);
+		dma_unmap_single(&qdev->pdev->dev, sbq_desc->dma_addr,
+				 SMALL_BUF_MAP_SIZE, DMA_FROM_DEVICE);
+		skb = sbq_desc->p.skb;
+		qlge_realign_skb(skb, hdr_len);
+		skb_put(skb, hdr_len);
+		sbq_desc->p.skb = NULL;
+	}
+
+	/*
+	 * Handle the data buffer(s).
+	 */
+	if (unlikely(!length)) {	/* Is there data too? */
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "No Data buffer in this packet.\n");
+		return skb;
+	}
+
+	if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS) {
+		if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Headers in small, data of %d bytes in small, combine them.\n",
+				     length);
+			/*
+			 * Data is less than small buffer size so it's
+			 * stuffed in a small buffer.
+			 * For this case we append the data
+			 * from the "data" small buffer to the "header" small
+			 * buffer.
+			 */
+			sbq_desc = qlge_get_curr_buf(&rx_ring->sbq);
+			dma_sync_single_for_cpu(&qdev->pdev->dev,
+						sbq_desc->dma_addr,
+						SMALL_BUF_MAP_SIZE,
+						DMA_FROM_DEVICE);
+			skb_put_data(skb, sbq_desc->p.skb->data, length);
+		} else {
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "%d bytes in a single small buffer.\n",
+				     length);
+			sbq_desc = qlge_get_curr_buf(&rx_ring->sbq);
+			skb = sbq_desc->p.skb;
+			qlge_realign_skb(skb, length);
+			skb_put(skb, length);
+			dma_unmap_single(&qdev->pdev->dev, sbq_desc->dma_addr,
+					 SMALL_BUF_MAP_SIZE,
+					 DMA_FROM_DEVICE);
+			sbq_desc->p.skb = NULL;
+		}
+	} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) {
+		if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS) {
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Header in small, %d bytes in large. Chain large to small!\n",
+				     length);
+			/*
+			 * The data is in a single large buffer.  We
+			 * chain it to the header buffer's skb and let
+			 * it rip.
+			 */
+			lbq_desc = qlge_get_curr_lchunk(qdev, rx_ring);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Chaining page at offset = %d, for %d bytes  to skb.\n",
+				     lbq_desc->p.pg_chunk.offset, length);
+			skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
+					   lbq_desc->p.pg_chunk.offset, length);
+			skb->len += length;
+			skb->data_len += length;
+			skb->truesize += length;
+		} else {
+			/*
+			 * The headers and data are in a single large buffer. We
+			 * copy it to a new skb and let it go. This can happen with
+			 * jumbo mtu on a non-TCP/UDP frame.
+			 */
+			lbq_desc = qlge_get_curr_lchunk(qdev, rx_ring);
+			skb = netdev_alloc_skb(qdev->ndev, length);
+			if (!skb) {
+				netif_printk(qdev, probe, KERN_DEBUG, qdev->ndev,
+					     "No skb available, drop the packet.\n");
+				return NULL;
+			}
+			dma_unmap_page(&qdev->pdev->dev, lbq_desc->dma_addr,
+				       qdev->lbq_buf_size,
+				       DMA_FROM_DEVICE);
+			skb_reserve(skb, NET_IP_ALIGN);
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "%d bytes of headers and data in large. Chain page to new skb and pull tail.\n",
+				     length);
+			skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
+					   lbq_desc->p.pg_chunk.offset,
+					   length);
+			skb->len += length;
+			skb->data_len += length;
+			skb->truesize += length;
+			qlge_update_mac_hdr_len(qdev, ib_mac_rsp,
+						lbq_desc->p.pg_chunk.va,
+						&hlen);
+			__pskb_pull_tail(skb, hlen);
+		}
+	} else {
+		/*
+		 * The data is in a chain of large buffers
+		 * pointed to by a small buffer.  We loop
+		 * thru and chain them to the our small header
+		 * buffer's skb.
+		 * frags:  There are 18 max frags and our small
+		 *         buffer will hold 32 of them. The thing is,
+		 *         we'll use 3 max for our 9000 byte jumbo
+		 *         frames.  If the MTU goes up we could
+		 *          eventually be in trouble.
+		 */
+		int size, i = 0;
+
+		sbq_desc = qlge_get_curr_buf(&rx_ring->sbq);
+		dma_unmap_single(&qdev->pdev->dev, sbq_desc->dma_addr,
+				 SMALL_BUF_MAP_SIZE, DMA_FROM_DEVICE);
+		if (!(ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HS)) {
+			/*
+			 * This is an non TCP/UDP IP frame, so
+			 * the headers aren't split into a small
+			 * buffer.  We have to use the small buffer
+			 * that contains our sg list as our skb to
+			 * send upstairs. Copy the sg list here to
+			 * a local buffer and use it to find the
+			 * pages to chain.
+			 */
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "%d bytes of headers & data in chain of large.\n",
+				     length);
+			skb = sbq_desc->p.skb;
+			sbq_desc->p.skb = NULL;
+			skb_reserve(skb, NET_IP_ALIGN);
+		}
+		do {
+			lbq_desc = qlge_get_curr_lchunk(qdev, rx_ring);
+			size = min(length, qdev->lbq_buf_size);
+
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Adding page %d to skb for %d bytes.\n",
+				     i, size);
+			skb_fill_page_desc(skb, i,
+					   lbq_desc->p.pg_chunk.page,
+					   lbq_desc->p.pg_chunk.offset, size);
+			skb->len += size;
+			skb->data_len += size;
+			skb->truesize += size;
+			length -= size;
+			i++;
+		} while (length > 0);
+		qlge_update_mac_hdr_len(qdev, ib_mac_rsp, lbq_desc->p.pg_chunk.va,
+					&hlen);
+		__pskb_pull_tail(skb, hlen);
+	}
+	return skb;
+}
+
+/* Process an inbound completion from an rx ring. */
+static void qlge_process_mac_split_rx_intr(struct qlge_adapter *qdev,
+					   struct rx_ring *rx_ring,
+					   struct qlge_ib_mac_iocb_rsp *ib_mac_rsp,
+					   u16 vlan_id)
+{
+	struct net_device *ndev = qdev->ndev;
+	struct sk_buff *skb = NULL;
+
+	skb = qlge_build_rx_skb(qdev, rx_ring, ib_mac_rsp);
+	if (unlikely(!skb)) {
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "No skb available, drop packet.\n");
+		rx_ring->rx_dropped++;
+		return;
+	}
+
+	/* Frame error, so drop the packet. */
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+		qlge_categorize_rx_err(qdev, ib_mac_rsp->flags2, rx_ring);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/* The max framesize filter on this chip is set higher than
+	 * MTU since FCoE uses 2k frames.
+	 */
+	if (skb->len > ndev->mtu + ETH_HLEN) {
+		dev_kfree_skb_any(skb);
+		rx_ring->rx_dropped++;
+		return;
+	}
+
+	/* loopback self test for ethtool */
+	if (test_bit(QL_SELFTEST, &qdev->flags)) {
+		qlge_check_lb_frame(qdev, skb);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	prefetch(skb->data);
+	if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev, "%s Multicast.\n",
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_HASH ? "Hash" :
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_REG ? "Registered" :
+			     (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
+			     IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
+		rx_ring->rx_multicast++;
+	}
+	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) {
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "Promiscuous Packet.\n");
+	}
+
+	skb->protocol = eth_type_trans(skb, ndev);
+	skb_checksum_none_assert(skb);
+
+	/* If rx checksum is on, and there are no
+	 * csum or frame errors.
+	 */
+	if ((ndev->features & NETIF_F_RXCSUM) &&
+	    !(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
+		/* TCP frame. */
+		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "TCP checksum done!\n");
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		} else if ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_U) &&
+			   (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_V4)) {
+			/* Unfragmented ipv4 UDP frame. */
+			struct iphdr *iph = (struct iphdr *)skb->data;
+
+			if (!(iph->frag_off &
+			      htons(IP_MF | IP_OFFSET))) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+					     "TCP checksum done!\n");
+			}
+		}
+	}
+
+	rx_ring->rx_packets++;
+	rx_ring->rx_bytes += skb->len;
+	skb_record_rx_queue(skb, rx_ring->cq_id);
+	if (vlan_id != 0xffff)
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_id);
+	if (skb->ip_summed == CHECKSUM_UNNECESSARY)
+		napi_gro_receive(&rx_ring->napi, skb);
+	else
+		netif_receive_skb(skb);
+}
+
+/* Process an inbound completion from an rx ring. */
+static unsigned long qlge_process_mac_rx_intr(struct qlge_adapter *qdev,
+					      struct rx_ring *rx_ring,
+					      struct qlge_ib_mac_iocb_rsp *ib_mac_rsp)
+{
+	u32 length = le32_to_cpu(ib_mac_rsp->data_len);
+	u16 vlan_id = ((ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) &&
+		       (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)) ?
+		((le16_to_cpu(ib_mac_rsp->vlan_id) &
+		  IB_MAC_IOCB_RSP_VLAN_MASK)) : 0xffff;
+
+	if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV) {
+		/* The data and headers are split into
+		 * separate buffers.
+		 */
+		qlge_process_mac_split_rx_intr(qdev, rx_ring, ib_mac_rsp,
+					       vlan_id);
+	} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DS) {
+		/* The data fit in a single small buffer.
+		 * Allocate a new skb, copy the data and
+		 * return the buffer to the free pool.
+		 */
+		qlge_process_mac_rx_skb(qdev, rx_ring, ib_mac_rsp, length,
+					vlan_id);
+	} else if ((ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) &&
+		   !(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK) &&
+		   (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T)) {
+		/* TCP packet in a page chunk that's been checksummed.
+		 * Tack it on to our GRO skb and let it go.
+		 */
+		qlge_process_mac_rx_gro_page(qdev, rx_ring, ib_mac_rsp, length,
+					     vlan_id);
+	} else if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_DL) {
+		/* Non-TCP packet in a page chunk. Allocate an
+		 * skb, tack it on frags, and send it up.
+		 */
+		qlge_process_mac_rx_page(qdev, rx_ring, ib_mac_rsp, length,
+					 vlan_id);
+	} else {
+		/* Non-TCP/UDP large frames that span multiple buffers
+		 * can be processed correctly by the split frame logic.
+		 */
+		qlge_process_mac_split_rx_intr(qdev, rx_ring, ib_mac_rsp,
+					       vlan_id);
+	}
+
+	return (unsigned long)length;
+}
+
+/* Process an outbound completion from an rx ring. */
+static void qlge_process_mac_tx_intr(struct qlge_adapter *qdev,
+				     struct qlge_ob_mac_iocb_rsp *mac_rsp)
+{
+	struct tx_ring *tx_ring;
+	struct tx_ring_desc *tx_ring_desc;
+
+	tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
+	tx_ring_desc = &tx_ring->q[mac_rsp->tid];
+	qlge_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
+	tx_ring->tx_bytes += (tx_ring_desc->skb)->len;
+	tx_ring->tx_packets++;
+	dev_kfree_skb(tx_ring_desc->skb);
+	tx_ring_desc->skb = NULL;
+
+	if (unlikely(mac_rsp->flags1 & (OB_MAC_IOCB_RSP_E |
+					OB_MAC_IOCB_RSP_S |
+					OB_MAC_IOCB_RSP_L |
+					OB_MAC_IOCB_RSP_P | OB_MAC_IOCB_RSP_B))) {
+		if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_E) {
+			netif_warn(qdev, tx_done, qdev->ndev,
+				   "Total descriptor length did not match transfer length.\n");
+		}
+		if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_S) {
+			netif_warn(qdev, tx_done, qdev->ndev,
+				   "Frame too short to be valid, not sent.\n");
+		}
+		if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_L) {
+			netif_warn(qdev, tx_done, qdev->ndev,
+				   "Frame too long, but sent anyway.\n");
+		}
+		if (mac_rsp->flags1 & OB_MAC_IOCB_RSP_B) {
+			netif_warn(qdev, tx_done, qdev->ndev,
+				   "PCI backplane error. Frame not sent.\n");
+		}
+	}
+	atomic_inc(&tx_ring->tx_count);
+}
+
+/* Fire up a handler to reset the MPI processor. */
+void qlge_queue_fw_error(struct qlge_adapter *qdev)
+{
+	qlge_link_off(qdev);
+	queue_delayed_work(qdev->workqueue, &qdev->mpi_reset_work, 0);
+}
+
+void qlge_queue_asic_error(struct qlge_adapter *qdev)
+{
+	qlge_link_off(qdev);
+	qlge_disable_interrupts(qdev);
+	/* Clear adapter up bit to signal the recovery
+	 * process that it shouldn't kill the reset worker
+	 * thread
+	 */
+	clear_bit(QL_ADAPTER_UP, &qdev->flags);
+	/* Set asic recovery bit to indicate reset process that we are
+	 * in fatal error recovery process rather than normal close
+	 */
+	set_bit(QL_ASIC_RECOVERY, &qdev->flags);
+	queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0);
+}
+
+static void qlge_process_chip_ae_intr(struct qlge_adapter *qdev,
+				      struct qlge_ib_ae_iocb_rsp *ib_ae_rsp)
+{
+	switch (ib_ae_rsp->event) {
+	case MGMT_ERR_EVENT:
+		netif_err(qdev, rx_err, qdev->ndev,
+			  "Management Processor Fatal Error.\n");
+		qlge_queue_fw_error(qdev);
+		return;
+
+	case CAM_LOOKUP_ERR_EVENT:
+		netdev_err(qdev->ndev, "Multiple CAM hits lookup occurred.\n");
+		netdev_err(qdev->ndev, "This event shouldn't occur.\n");
+		qlge_queue_asic_error(qdev);
+		return;
+
+	case SOFT_ECC_ERROR_EVENT:
+		netdev_err(qdev->ndev, "Soft ECC error detected.\n");
+		qlge_queue_asic_error(qdev);
+		break;
+
+	case PCI_ERR_ANON_BUF_RD:
+		netdev_err(qdev->ndev,
+			   "PCI error occurred when reading anonymous buffers from rx_ring %d.\n",
+			   ib_ae_rsp->q_id);
+		qlge_queue_asic_error(qdev);
+		break;
+
+	default:
+		netif_err(qdev, drv, qdev->ndev, "Unexpected event %d.\n",
+			  ib_ae_rsp->event);
+		qlge_queue_asic_error(qdev);
+		break;
+	}
+}
+
+static int qlge_clean_outbound_rx_ring(struct rx_ring *rx_ring)
+{
+	struct qlge_adapter *qdev = rx_ring->qdev;
+	u32 prod = qlge_read_sh_reg(rx_ring->prod_idx_sh_reg);
+	struct qlge_ob_mac_iocb_rsp *net_rsp = NULL;
+	int count = 0;
+
+	struct tx_ring *tx_ring;
+	/* While there are entries in the completion queue. */
+	while (prod != rx_ring->cnsmr_idx) {
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "cq_id = %d, prod = %d, cnsmr = %d\n",
+			     rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
+
+		net_rsp = (struct qlge_ob_mac_iocb_rsp *)rx_ring->curr_entry;
+		rmb();
+		switch (net_rsp->opcode) {
+		case OPCODE_OB_MAC_TSO_IOCB:
+		case OPCODE_OB_MAC_IOCB:
+			qlge_process_mac_tx_intr(qdev, net_rsp);
+			break;
+		default:
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Hit default case, not handled! dropping the packet, opcode = %x.\n",
+				     net_rsp->opcode);
+		}
+		count++;
+		qlge_update_cq(rx_ring);
+		prod = qlge_read_sh_reg(rx_ring->prod_idx_sh_reg);
+	}
+	if (!net_rsp)
+		return 0;
+	qlge_write_cq_idx(rx_ring);
+	tx_ring = &qdev->tx_ring[net_rsp->txq_idx];
+	if (__netif_subqueue_stopped(qdev->ndev, tx_ring->wq_id)) {
+		if ((atomic_read(&tx_ring->tx_count) > (tx_ring->wq_len / 4)))
+			/*
+			 * The queue got stopped because the tx_ring was full.
+			 * Wake it up, because it's now at least 25% empty.
+			 */
+			netif_wake_subqueue(qdev->ndev, tx_ring->wq_id);
+	}
+
+	return count;
+}
+
+static int qlge_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget)
+{
+	struct qlge_adapter *qdev = rx_ring->qdev;
+	u32 prod = qlge_read_sh_reg(rx_ring->prod_idx_sh_reg);
+	struct qlge_net_rsp_iocb *net_rsp;
+	int count = 0;
+
+	/* While there are entries in the completion queue. */
+	while (prod != rx_ring->cnsmr_idx) {
+		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+			     "cq_id = %d, prod = %d, cnsmr = %d\n",
+			     rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
+
+		net_rsp = rx_ring->curr_entry;
+		rmb();
+		switch (net_rsp->opcode) {
+		case OPCODE_IB_MAC_IOCB:
+			qlge_process_mac_rx_intr(qdev, rx_ring,
+						 (struct qlge_ib_mac_iocb_rsp *)
+						 net_rsp);
+			break;
+
+		case OPCODE_IB_AE_IOCB:
+			qlge_process_chip_ae_intr(qdev, (struct qlge_ib_ae_iocb_rsp *)
+						  net_rsp);
+			break;
+		default:
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "Hit default case, not handled! dropping the packet, opcode = %x.\n",
+				     net_rsp->opcode);
+			break;
+		}
+		count++;
+		qlge_update_cq(rx_ring);
+		prod = qlge_read_sh_reg(rx_ring->prod_idx_sh_reg);
+		if (count == budget)
+			break;
+	}
+	qlge_update_buffer_queues(rx_ring, GFP_ATOMIC, 0);
+	qlge_write_cq_idx(rx_ring);
+	return count;
+}
+
+static int qlge_napi_poll_msix(struct napi_struct *napi, int budget)
+{
+	struct rx_ring *rx_ring = container_of(napi, struct rx_ring, napi);
+	struct qlge_adapter *qdev = rx_ring->qdev;
+	struct rx_ring *trx_ring;
+	int i, work_done = 0;
+	struct intr_context *ctx = &qdev->intr_context[rx_ring->cq_id];
+
+	netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+		     "Enter, NAPI POLL cq_id = %d.\n", rx_ring->cq_id);
+
+	/* Service the TX rings first.  They start
+	 * right after the RSS rings.
+	 */
+	for (i = qdev->rss_ring_count; i < qdev->rx_ring_count; i++) {
+		trx_ring = &qdev->rx_ring[i];
+		/* If this TX completion ring belongs to this vector and
+		 * it's not empty then service it.
+		 */
+		if ((ctx->irq_mask & (1 << trx_ring->cq_id)) &&
+		    (qlge_read_sh_reg(trx_ring->prod_idx_sh_reg) !=
+		     trx_ring->cnsmr_idx)) {
+			netif_printk(qdev, intr, KERN_DEBUG, qdev->ndev,
+				     "%s: Servicing TX completion ring %d.\n",
+				     __func__, trx_ring->cq_id);
+			qlge_clean_outbound_rx_ring(trx_ring);
+		}
+	}
+
+	/*
+	 * Now service the RSS ring if it's active.
+	 */
+	if (qlge_read_sh_reg(rx_ring->prod_idx_sh_reg) !=
+	    rx_ring->cnsmr_idx) {
+		netif_printk(qdev, intr, KERN_DEBUG, qdev->ndev,
+			     "%s: Servicing RX completion ring %d.\n",
+			     __func__, rx_ring->cq_id);
+		work_done = qlge_clean_inbound_rx_ring(rx_ring, budget);
+	}
+
+	if (work_done < budget) {
+		napi_complete_done(napi, work_done);
+		qlge_enable_completion_interrupt(qdev, rx_ring->irq);
+	}
+	return work_done;
+}
+
+static void qlge_vlan_mode(struct net_device *ndev, netdev_features_t features)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	if (features & NETIF_F_HW_VLAN_CTAG_RX) {
+		qlge_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK |
+			     NIC_RCV_CFG_VLAN_MATCH_AND_NON);
+	} else {
+		qlge_write32(qdev, NIC_RCV_CFG, NIC_RCV_CFG_VLAN_MASK);
+	}
+}
+
+/*
+ * qlge_update_hw_vlan_features - helper routine to reinitialize the adapter
+ * based on the features to enable/disable hardware vlan accel
+ */
+static int qlge_update_hw_vlan_features(struct net_device *ndev,
+					netdev_features_t features)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	bool need_restart = netif_running(ndev);
+	int status = 0;
+
+	if (need_restart) {
+		status = qlge_adapter_down(qdev);
+		if (status) {
+			netif_err(qdev, link, qdev->ndev,
+				  "Failed to bring down the adapter\n");
+			return status;
+		}
+	}
+
+	/* update the features with resent change */
+	ndev->features = features;
+
+	if (need_restart) {
+		status = qlge_adapter_up(qdev);
+		if (status) {
+			netif_err(qdev, link, qdev->ndev,
+				  "Failed to bring up the adapter\n");
+			return status;
+		}
+	}
+
+	return status;
+}
+
+static int qlge_set_features(struct net_device *ndev,
+			     netdev_features_t features)
+{
+	netdev_features_t changed = ndev->features ^ features;
+	int err;
+
+	if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
+		/* Update the behavior of vlan accel in the adapter */
+		err = qlge_update_hw_vlan_features(ndev, features);
+		if (err)
+			return err;
+
+		qlge_vlan_mode(ndev, features);
+	}
+
+	return 0;
+}
+
+static int __qlge_vlan_rx_add_vid(struct qlge_adapter *qdev, u16 vid)
+{
+	u32 enable_bit = MAC_ADDR_E;
+	int err;
+
+	err = qlge_set_mac_addr_reg(qdev, (u8 *)&enable_bit,
+				    MAC_ADDR_TYPE_VLAN, vid);
+	if (err)
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init vlan address.\n");
+	return err;
+}
+
+static int qlge_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	int status;
+	int err;
+
+	status = qlge_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+
+	err = __qlge_vlan_rx_add_vid(qdev, vid);
+	set_bit(vid, qdev->active_vlans);
+
+	qlge_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+
+	return err;
+}
+
+static int __qlge_vlan_rx_kill_vid(struct qlge_adapter *qdev, u16 vid)
+{
+	u32 enable_bit = 0;
+	int err;
+
+	err = qlge_set_mac_addr_reg(qdev, (u8 *)&enable_bit,
+				    MAC_ADDR_TYPE_VLAN, vid);
+	if (err)
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to clear vlan address.\n");
+	return err;
+}
+
+static int qlge_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	int status;
+	int err;
+
+	status = qlge_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+
+	err = __qlge_vlan_rx_kill_vid(qdev, vid);
+	clear_bit(vid, qdev->active_vlans);
+
+	qlge_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+
+	return err;
+}
+
+static void qlge_restore_vlan(struct qlge_adapter *qdev)
+{
+	int status;
+	u16 vid;
+
+	status = qlge_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return;
+
+	for_each_set_bit(vid, qdev->active_vlans, VLAN_N_VID)
+		__qlge_vlan_rx_add_vid(qdev, vid);
+
+	qlge_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+}
+
+/* MSI-X Multiple Vector Interrupt Handler for inbound completions. */
+static irqreturn_t qlge_msix_rx_isr(int irq, void *dev_id)
+{
+	struct rx_ring *rx_ring = dev_id;
+
+	napi_schedule(&rx_ring->napi);
+	return IRQ_HANDLED;
+}
+
+/* This handles a fatal error, MPI activity, and the default
+ * rx_ring in an MSI-X multiple vector environment.
+ * In MSI/Legacy environment it also process the rest of
+ * the rx_rings.
+ */
+static irqreturn_t qlge_isr(int irq, void *dev_id)
+{
+	struct rx_ring *rx_ring = dev_id;
+	struct qlge_adapter *qdev = rx_ring->qdev;
+	struct intr_context *intr_context = &qdev->intr_context[0];
+	u32 var;
+	int work_done = 0;
+
+	/* Experience shows that when using INTx interrupts, interrupts must
+	 * be masked manually.
+	 * When using MSI mode, INTR_EN_EN must be explicitly disabled
+	 * (even though it is auto-masked), otherwise a later command to
+	 * enable it is not effective.
+	 */
+	if (!test_bit(QL_MSIX_ENABLED, &qdev->flags))
+		qlge_disable_completion_interrupt(qdev, 0);
+
+	var = qlge_read32(qdev, STS);
+
+	/*
+	 * Check for fatal error.
+	 */
+	if (var & STS_FE) {
+		qlge_disable_completion_interrupt(qdev, 0);
+		qlge_queue_asic_error(qdev);
+		netdev_err(qdev->ndev, "Got fatal error, STS = %x.\n", var);
+		var = qlge_read32(qdev, ERR_STS);
+		netdev_err(qdev->ndev, "Resetting chip. Error Status Register = 0x%x\n", var);
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * Check MPI processor activity.
+	 */
+	if ((var & STS_PI) &&
+	    (qlge_read32(qdev, INTR_MASK) & INTR_MASK_PI)) {
+		/*
+		 * We've got an async event or mailbox completion.
+		 * Handle it and clear the source of the interrupt.
+		 */
+		netif_err(qdev, intr, qdev->ndev,
+			  "Got MPI processor interrupt.\n");
+		qlge_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
+		queue_delayed_work_on(smp_processor_id(),
+				      qdev->workqueue, &qdev->mpi_work, 0);
+		work_done++;
+	}
+
+	/*
+	 * Get the bit-mask that shows the active queues for this
+	 * pass.  Compare it to the queues that this irq services
+	 * and call napi if there's a match.
+	 */
+	var = qlge_read32(qdev, ISR1);
+	if (var & intr_context->irq_mask) {
+		netif_info(qdev, intr, qdev->ndev,
+			   "Waking handler for rx_ring[0].\n");
+		napi_schedule(&rx_ring->napi);
+		work_done++;
+	} else {
+		/* Experience shows that the device sometimes signals an
+		 * interrupt but no work is scheduled from this function.
+		 * Nevertheless, the interrupt is auto-masked. Therefore, we
+		 * systematically re-enable the interrupt if we didn't
+		 * schedule napi.
+		 */
+		qlge_enable_completion_interrupt(qdev, 0);
+	}
+
+	return work_done ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int qlge_tso(struct sk_buff *skb, struct qlge_ob_mac_tso_iocb_req *mac_iocb_ptr)
+{
+	if (skb_is_gso(skb)) {
+		int err;
+		__be16 l3_proto = vlan_get_protocol(skb);
+
+		err = skb_cow_head(skb, 0);
+		if (err < 0)
+			return err;
+
+		mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB;
+		mac_iocb_ptr->flags3 |= OB_MAC_TSO_IOCB_IC;
+		mac_iocb_ptr->frame_len = cpu_to_le32((u32)skb->len);
+		mac_iocb_ptr->total_hdrs_len =
+			cpu_to_le16(skb_tcp_all_headers(skb));
+		mac_iocb_ptr->net_trans_offset =
+			cpu_to_le16(skb_network_offset(skb) |
+				    skb_transport_offset(skb)
+				    << OB_MAC_TRANSPORT_HDR_SHIFT);
+		mac_iocb_ptr->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+		mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_LSO;
+		if (likely(l3_proto == htons(ETH_P_IP))) {
+			struct iphdr *iph = ip_hdr(skb);
+
+			iph->check = 0;
+			mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4;
+			tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+								 iph->daddr, 0,
+								 IPPROTO_TCP,
+								 0);
+		} else if (l3_proto == htons(ETH_P_IPV6)) {
+			mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP6;
+			tcp_hdr(skb)->check =
+				~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+						 &ipv6_hdr(skb)->daddr,
+						 0, IPPROTO_TCP, 0);
+		}
+		return 1;
+	}
+	return 0;
+}
+
+static void qlge_hw_csum_setup(struct sk_buff *skb,
+			       struct qlge_ob_mac_tso_iocb_req *mac_iocb_ptr)
+{
+	int len;
+	struct iphdr *iph = ip_hdr(skb);
+	__sum16 *check;
+
+	mac_iocb_ptr->opcode = OPCODE_OB_MAC_TSO_IOCB;
+	mac_iocb_ptr->frame_len = cpu_to_le32((u32)skb->len);
+	mac_iocb_ptr->net_trans_offset =
+		cpu_to_le16(skb_network_offset(skb) |
+			    skb_transport_offset(skb) << OB_MAC_TRANSPORT_HDR_SHIFT);
+
+	mac_iocb_ptr->flags1 |= OB_MAC_TSO_IOCB_IP4;
+	len = (ntohs(iph->tot_len) - (iph->ihl << 2));
+	if (likely(iph->protocol == IPPROTO_TCP)) {
+		check = &(tcp_hdr(skb)->check);
+		mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_TC;
+		mac_iocb_ptr->total_hdrs_len =
+			cpu_to_le16(skb_transport_offset(skb) +
+				    (tcp_hdr(skb)->doff << 2));
+	} else {
+		check = &(udp_hdr(skb)->check);
+		mac_iocb_ptr->flags2 |= OB_MAC_TSO_IOCB_UC;
+		mac_iocb_ptr->total_hdrs_len =
+			cpu_to_le16(skb_transport_offset(skb) +
+				    sizeof(struct udphdr));
+	}
+	*check = ~csum_tcpudp_magic(iph->saddr,
+				    iph->daddr, len, iph->protocol, 0);
+}
+
+static netdev_tx_t qlge_send(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	struct qlge_ob_mac_iocb_req *mac_iocb_ptr;
+	struct tx_ring_desc *tx_ring_desc;
+	int tso;
+	struct tx_ring *tx_ring;
+	u32 tx_ring_idx = (u32)skb->queue_mapping;
+
+	tx_ring = &qdev->tx_ring[tx_ring_idx];
+
+	if (skb_padto(skb, ETH_ZLEN))
+		return NETDEV_TX_OK;
+
+	if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) {
+		netif_info(qdev, tx_queued, qdev->ndev,
+			   "%s: BUG! shutting down tx queue %d due to lack of resources.\n",
+			   __func__, tx_ring_idx);
+		netif_stop_subqueue(ndev, tx_ring->wq_id);
+		tx_ring->tx_errors++;
+		return NETDEV_TX_BUSY;
+	}
+	tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
+	mac_iocb_ptr = tx_ring_desc->queue_entry;
+	memset((void *)mac_iocb_ptr, 0, sizeof(*mac_iocb_ptr));
+
+	mac_iocb_ptr->opcode = OPCODE_OB_MAC_IOCB;
+	mac_iocb_ptr->tid = tx_ring_desc->index;
+	/* We use the upper 32-bits to store the tx queue for this IO.
+	 * When we get the completion we can use it to establish the context.
+	 */
+	mac_iocb_ptr->txq_idx = tx_ring_idx;
+	tx_ring_desc->skb = skb;
+
+	mac_iocb_ptr->frame_len = cpu_to_le16((u16)skb->len);
+
+	if (skb_vlan_tag_present(skb)) {
+		netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev,
+			     "Adding a vlan tag %d.\n", skb_vlan_tag_get(skb));
+		mac_iocb_ptr->flags3 |= OB_MAC_IOCB_V;
+		mac_iocb_ptr->vlan_tci = cpu_to_le16(skb_vlan_tag_get(skb));
+	}
+	tso = qlge_tso(skb, (struct qlge_ob_mac_tso_iocb_req *)mac_iocb_ptr);
+	if (tso < 0) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	} else if (unlikely(!tso) && (skb->ip_summed == CHECKSUM_PARTIAL)) {
+		qlge_hw_csum_setup(skb,
+				   (struct qlge_ob_mac_tso_iocb_req *)mac_iocb_ptr);
+	}
+	if (qlge_map_send(qdev, mac_iocb_ptr, skb, tx_ring_desc) !=
+	    NETDEV_TX_OK) {
+		netif_err(qdev, tx_queued, qdev->ndev,
+			  "Could not map the segments.\n");
+		tx_ring->tx_errors++;
+		return NETDEV_TX_BUSY;
+	}
+
+	tx_ring->prod_idx++;
+	if (tx_ring->prod_idx == tx_ring->wq_len)
+		tx_ring->prod_idx = 0;
+	wmb();
+
+	qlge_write_db_reg_relaxed(tx_ring->prod_idx, tx_ring->prod_idx_db_reg);
+	netif_printk(qdev, tx_queued, KERN_DEBUG, qdev->ndev,
+		     "tx queued, slot %d, len %d\n",
+		     tx_ring->prod_idx, skb->len);
+
+	atomic_dec(&tx_ring->tx_count);
+
+	if (unlikely(atomic_read(&tx_ring->tx_count) < 2)) {
+		netif_stop_subqueue(ndev, tx_ring->wq_id);
+		if ((atomic_read(&tx_ring->tx_count) > (tx_ring->wq_len / 4)))
+			/*
+			 * The queue got stopped because the tx_ring was full.
+			 * Wake it up, because it's now at least 25% empty.
+			 */
+			netif_wake_subqueue(qdev->ndev, tx_ring->wq_id);
+	}
+	return NETDEV_TX_OK;
+}
+
+static void qlge_free_shadow_space(struct qlge_adapter *qdev)
+{
+	if (qdev->rx_ring_shadow_reg_area) {
+		dma_free_coherent(&qdev->pdev->dev,
+				  PAGE_SIZE,
+				  qdev->rx_ring_shadow_reg_area,
+				  qdev->rx_ring_shadow_reg_dma);
+		qdev->rx_ring_shadow_reg_area = NULL;
+	}
+	if (qdev->tx_ring_shadow_reg_area) {
+		dma_free_coherent(&qdev->pdev->dev,
+				  PAGE_SIZE,
+				  qdev->tx_ring_shadow_reg_area,
+				  qdev->tx_ring_shadow_reg_dma);
+		qdev->tx_ring_shadow_reg_area = NULL;
+	}
+}
+
+static int qlge_alloc_shadow_space(struct qlge_adapter *qdev)
+{
+	qdev->rx_ring_shadow_reg_area =
+		dma_alloc_coherent(&qdev->pdev->dev, PAGE_SIZE,
+				   &qdev->rx_ring_shadow_reg_dma, GFP_ATOMIC);
+	if (!qdev->rx_ring_shadow_reg_area) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Allocation of RX shadow space failed.\n");
+		return -ENOMEM;
+	}
+
+	qdev->tx_ring_shadow_reg_area =
+		dma_alloc_coherent(&qdev->pdev->dev, PAGE_SIZE,
+				   &qdev->tx_ring_shadow_reg_dma, GFP_ATOMIC);
+	if (!qdev->tx_ring_shadow_reg_area) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Allocation of TX shadow space failed.\n");
+		goto err_wqp_sh_area;
+	}
+	return 0;
+
+err_wqp_sh_area:
+	dma_free_coherent(&qdev->pdev->dev,
+			  PAGE_SIZE,
+			  qdev->rx_ring_shadow_reg_area,
+			  qdev->rx_ring_shadow_reg_dma);
+	return -ENOMEM;
+}
+
+static void qlge_init_tx_ring(struct qlge_adapter *qdev, struct tx_ring *tx_ring)
+{
+	struct tx_ring_desc *tx_ring_desc;
+	int i;
+	struct qlge_ob_mac_iocb_req *mac_iocb_ptr;
+
+	mac_iocb_ptr = tx_ring->wq_base;
+	tx_ring_desc = tx_ring->q;
+	for (i = 0; i < tx_ring->wq_len; i++) {
+		tx_ring_desc->index = i;
+		tx_ring_desc->skb = NULL;
+		tx_ring_desc->queue_entry = mac_iocb_ptr;
+		mac_iocb_ptr++;
+		tx_ring_desc++;
+	}
+	atomic_set(&tx_ring->tx_count, tx_ring->wq_len);
+}
+
+static void qlge_free_tx_resources(struct qlge_adapter *qdev,
+				   struct tx_ring *tx_ring)
+{
+	if (tx_ring->wq_base) {
+		dma_free_coherent(&qdev->pdev->dev, tx_ring->wq_size,
+				  tx_ring->wq_base, tx_ring->wq_base_dma);
+		tx_ring->wq_base = NULL;
+	}
+	kfree(tx_ring->q);
+	tx_ring->q = NULL;
+}
+
+static int qlge_alloc_tx_resources(struct qlge_adapter *qdev,
+				   struct tx_ring *tx_ring)
+{
+	tx_ring->wq_base =
+		dma_alloc_coherent(&qdev->pdev->dev, tx_ring->wq_size,
+				   &tx_ring->wq_base_dma, GFP_ATOMIC);
+
+	if (!tx_ring->wq_base ||
+	    tx_ring->wq_base_dma & WQ_ADDR_ALIGN)
+		goto pci_alloc_err;
+
+	tx_ring->q =
+		kmalloc_array(tx_ring->wq_len, sizeof(struct tx_ring_desc),
+			      GFP_KERNEL);
+	if (!tx_ring->q)
+		goto err;
+
+	return 0;
+err:
+	dma_free_coherent(&qdev->pdev->dev, tx_ring->wq_size,
+			  tx_ring->wq_base, tx_ring->wq_base_dma);
+	tx_ring->wq_base = NULL;
+pci_alloc_err:
+	netif_err(qdev, ifup, qdev->ndev, "tx_ring alloc failed.\n");
+	return -ENOMEM;
+}
+
+static void qlge_free_lbq_buffers(struct qlge_adapter *qdev, struct rx_ring *rx_ring)
+{
+	struct qlge_bq *lbq = &rx_ring->lbq;
+	unsigned int last_offset;
+
+	last_offset = qlge_lbq_block_size(qdev) - qdev->lbq_buf_size;
+	while (lbq->next_to_clean != lbq->next_to_use) {
+		struct qlge_bq_desc *lbq_desc =
+			&lbq->queue[lbq->next_to_clean];
+
+		if (lbq_desc->p.pg_chunk.offset == last_offset)
+			dma_unmap_page(&qdev->pdev->dev, lbq_desc->dma_addr,
+				       qlge_lbq_block_size(qdev),
+				       DMA_FROM_DEVICE);
+		put_page(lbq_desc->p.pg_chunk.page);
+
+		lbq->next_to_clean = QLGE_BQ_WRAP(lbq->next_to_clean + 1);
+	}
+
+	if (rx_ring->master_chunk.page) {
+		dma_unmap_page(&qdev->pdev->dev, rx_ring->chunk_dma_addr,
+			       qlge_lbq_block_size(qdev), DMA_FROM_DEVICE);
+		put_page(rx_ring->master_chunk.page);
+		rx_ring->master_chunk.page = NULL;
+	}
+}
+
+static void qlge_free_sbq_buffers(struct qlge_adapter *qdev, struct rx_ring *rx_ring)
+{
+	int i;
+
+	for (i = 0; i < QLGE_BQ_LEN; i++) {
+		struct qlge_bq_desc *sbq_desc = &rx_ring->sbq.queue[i];
+
+		if (!sbq_desc) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "sbq_desc %d is NULL.\n", i);
+			return;
+		}
+		if (sbq_desc->p.skb) {
+			dma_unmap_single(&qdev->pdev->dev, sbq_desc->dma_addr,
+					 SMALL_BUF_MAP_SIZE,
+					 DMA_FROM_DEVICE);
+			dev_kfree_skb(sbq_desc->p.skb);
+			sbq_desc->p.skb = NULL;
+		}
+	}
+}
+
+/* Free all large and small rx buffers associated
+ * with the completion queues for this device.
+ */
+static void qlge_free_rx_buffers(struct qlge_adapter *qdev)
+{
+	int i;
+
+	for (i = 0; i < qdev->rx_ring_count; i++) {
+		struct rx_ring *rx_ring = &qdev->rx_ring[i];
+
+		if (rx_ring->lbq.queue)
+			qlge_free_lbq_buffers(qdev, rx_ring);
+		if (rx_ring->sbq.queue)
+			qlge_free_sbq_buffers(qdev, rx_ring);
+	}
+}
+
+static void qlge_alloc_rx_buffers(struct qlge_adapter *qdev)
+{
+	int i;
+
+	for (i = 0; i < qdev->rss_ring_count; i++)
+		qlge_update_buffer_queues(&qdev->rx_ring[i], GFP_KERNEL,
+					  HZ / 2);
+}
+
+static int qlge_init_bq(struct qlge_bq *bq)
+{
+	struct rx_ring *rx_ring = QLGE_BQ_CONTAINER(bq);
+	struct qlge_adapter *qdev = rx_ring->qdev;
+	struct qlge_bq_desc *bq_desc;
+	__le64 *buf_ptr;
+	int i;
+
+	bq->base = dma_alloc_coherent(&qdev->pdev->dev, QLGE_BQ_SIZE,
+				      &bq->base_dma, GFP_ATOMIC);
+	if (!bq->base)
+		return -ENOMEM;
+
+	bq->queue = kmalloc_array(QLGE_BQ_LEN, sizeof(struct qlge_bq_desc),
+				  GFP_KERNEL);
+	if (!bq->queue)
+		return -ENOMEM;
+
+	buf_ptr = bq->base;
+	bq_desc = &bq->queue[0];
+	for (i = 0; i < QLGE_BQ_LEN; i++, buf_ptr++, bq_desc++) {
+		bq_desc->p.skb = NULL;
+		bq_desc->index = i;
+		bq_desc->buf_ptr = buf_ptr;
+	}
+
+	return 0;
+}
+
+static void qlge_free_rx_resources(struct qlge_adapter *qdev,
+				   struct rx_ring *rx_ring)
+{
+	/* Free the small buffer queue. */
+	if (rx_ring->sbq.base) {
+		dma_free_coherent(&qdev->pdev->dev, QLGE_BQ_SIZE,
+				  rx_ring->sbq.base, rx_ring->sbq.base_dma);
+		rx_ring->sbq.base = NULL;
+	}
+
+	/* Free the small buffer queue control blocks. */
+	kfree(rx_ring->sbq.queue);
+	rx_ring->sbq.queue = NULL;
+
+	/* Free the large buffer queue. */
+	if (rx_ring->lbq.base) {
+		dma_free_coherent(&qdev->pdev->dev, QLGE_BQ_SIZE,
+				  rx_ring->lbq.base, rx_ring->lbq.base_dma);
+		rx_ring->lbq.base = NULL;
+	}
+
+	/* Free the large buffer queue control blocks. */
+	kfree(rx_ring->lbq.queue);
+	rx_ring->lbq.queue = NULL;
+
+	/* Free the rx queue. */
+	if (rx_ring->cq_base) {
+		dma_free_coherent(&qdev->pdev->dev,
+				  rx_ring->cq_size,
+				  rx_ring->cq_base, rx_ring->cq_base_dma);
+		rx_ring->cq_base = NULL;
+	}
+}
+
+/* Allocate queues and buffers for this completions queue based
+ * on the values in the parameter structure.
+ */
+static int qlge_alloc_rx_resources(struct qlge_adapter *qdev,
+				   struct rx_ring *rx_ring)
+{
+	/*
+	 * Allocate the completion queue for this rx_ring.
+	 */
+	rx_ring->cq_base =
+		dma_alloc_coherent(&qdev->pdev->dev, rx_ring->cq_size,
+				   &rx_ring->cq_base_dma, GFP_ATOMIC);
+
+	if (!rx_ring->cq_base) {
+		netif_err(qdev, ifup, qdev->ndev, "rx_ring alloc failed.\n");
+		return -ENOMEM;
+	}
+
+	if (rx_ring->cq_id < qdev->rss_ring_count &&
+	    (qlge_init_bq(&rx_ring->sbq) || qlge_init_bq(&rx_ring->lbq))) {
+		qlge_free_rx_resources(qdev, rx_ring);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void qlge_tx_ring_clean(struct qlge_adapter *qdev)
+{
+	struct tx_ring *tx_ring;
+	struct tx_ring_desc *tx_ring_desc;
+	int i, j;
+
+	/*
+	 * Loop through all queues and free
+	 * any resources.
+	 */
+	for (j = 0; j < qdev->tx_ring_count; j++) {
+		tx_ring = &qdev->tx_ring[j];
+		for (i = 0; i < tx_ring->wq_len; i++) {
+			tx_ring_desc = &tx_ring->q[i];
+			if (tx_ring_desc && tx_ring_desc->skb) {
+				netif_err(qdev, ifdown, qdev->ndev,
+					  "Freeing lost SKB %p, from queue %d, index %d.\n",
+					  tx_ring_desc->skb, j,
+					  tx_ring_desc->index);
+				qlge_unmap_send(qdev, tx_ring_desc,
+						tx_ring_desc->map_cnt);
+				dev_kfree_skb(tx_ring_desc->skb);
+				tx_ring_desc->skb = NULL;
+			}
+		}
+	}
+}
+
+static void qlge_free_mem_resources(struct qlge_adapter *qdev)
+{
+	int i;
+
+	for (i = 0; i < qdev->tx_ring_count; i++)
+		qlge_free_tx_resources(qdev, &qdev->tx_ring[i]);
+	for (i = 0; i < qdev->rx_ring_count; i++)
+		qlge_free_rx_resources(qdev, &qdev->rx_ring[i]);
+	qlge_free_shadow_space(qdev);
+}
+
+static int qlge_alloc_mem_resources(struct qlge_adapter *qdev)
+{
+	int i;
+
+	/* Allocate space for our shadow registers and such. */
+	if (qlge_alloc_shadow_space(qdev))
+		return -ENOMEM;
+
+	for (i = 0; i < qdev->rx_ring_count; i++) {
+		if (qlge_alloc_rx_resources(qdev, &qdev->rx_ring[i]) != 0) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "RX resource allocation failed.\n");
+			goto err_mem;
+		}
+	}
+	/* Allocate tx queue resources */
+	for (i = 0; i < qdev->tx_ring_count; i++) {
+		if (qlge_alloc_tx_resources(qdev, &qdev->tx_ring[i]) != 0) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "TX resource allocation failed.\n");
+			goto err_mem;
+		}
+	}
+	return 0;
+
+err_mem:
+	qlge_free_mem_resources(qdev);
+	return -ENOMEM;
+}
+
+/* Set up the rx ring control block and pass it to the chip.
+ * The control block is defined as
+ * "Completion Queue Initialization Control Block", or cqicb.
+ */
+static int qlge_start_rx_ring(struct qlge_adapter *qdev, struct rx_ring *rx_ring)
+{
+	struct cqicb *cqicb = &rx_ring->cqicb;
+	void *shadow_reg = qdev->rx_ring_shadow_reg_area +
+		(rx_ring->cq_id * RX_RING_SHADOW_SPACE);
+	u64 shadow_reg_dma = qdev->rx_ring_shadow_reg_dma +
+		(rx_ring->cq_id * RX_RING_SHADOW_SPACE);
+	void __iomem *doorbell_area =
+		qdev->doorbell_area + (DB_PAGE_SIZE * (128 + rx_ring->cq_id));
+	int err = 0;
+	u64 dma;
+	__le64 *base_indirect_ptr;
+	int page_entries;
+
+	/* Set up the shadow registers for this ring. */
+	rx_ring->prod_idx_sh_reg = shadow_reg;
+	rx_ring->prod_idx_sh_reg_dma = shadow_reg_dma;
+	*rx_ring->prod_idx_sh_reg = 0;
+	shadow_reg += sizeof(u64);
+	shadow_reg_dma += sizeof(u64);
+	rx_ring->lbq.base_indirect = shadow_reg;
+	rx_ring->lbq.base_indirect_dma = shadow_reg_dma;
+	shadow_reg += (sizeof(u64) * MAX_DB_PAGES_PER_BQ(QLGE_BQ_LEN));
+	shadow_reg_dma += (sizeof(u64) * MAX_DB_PAGES_PER_BQ(QLGE_BQ_LEN));
+	rx_ring->sbq.base_indirect = shadow_reg;
+	rx_ring->sbq.base_indirect_dma = shadow_reg_dma;
+
+	/* PCI doorbell mem area + 0x00 for consumer index register */
+	rx_ring->cnsmr_idx_db_reg = (u32 __iomem *)doorbell_area;
+	rx_ring->cnsmr_idx = 0;
+	rx_ring->curr_entry = rx_ring->cq_base;
+
+	/* PCI doorbell mem area + 0x04 for valid register */
+	rx_ring->valid_db_reg = doorbell_area + 0x04;
+
+	/* PCI doorbell mem area + 0x18 for large buffer consumer */
+	rx_ring->lbq.prod_idx_db_reg = (u32 __iomem *)(doorbell_area + 0x18);
+
+	/* PCI doorbell mem area + 0x1c */
+	rx_ring->sbq.prod_idx_db_reg = (u32 __iomem *)(doorbell_area + 0x1c);
+
+	memset((void *)cqicb, 0, sizeof(struct cqicb));
+	cqicb->msix_vect = rx_ring->irq;
+
+	cqicb->len = cpu_to_le16(QLGE_FIT16(rx_ring->cq_len) | LEN_V |
+				 LEN_CPP_CONT);
+
+	cqicb->addr = cpu_to_le64(rx_ring->cq_base_dma);
+
+	cqicb->prod_idx_addr = cpu_to_le64(rx_ring->prod_idx_sh_reg_dma);
+
+	/*
+	 * Set up the control block load flags.
+	 */
+	cqicb->flags = FLAGS_LC |	/* Load queue base address */
+		FLAGS_LV |		/* Load MSI-X vector */
+		FLAGS_LI;		/* Load irq delay values */
+	if (rx_ring->cq_id < qdev->rss_ring_count) {
+		cqicb->flags |= FLAGS_LL;	/* Load lbq values */
+		dma = (u64)rx_ring->lbq.base_dma;
+		base_indirect_ptr = rx_ring->lbq.base_indirect;
+
+		for (page_entries = 0;
+		     page_entries < MAX_DB_PAGES_PER_BQ(QLGE_BQ_LEN);
+		     page_entries++) {
+			base_indirect_ptr[page_entries] = cpu_to_le64(dma);
+			dma += DB_PAGE_SIZE;
+		}
+		cqicb->lbq_addr = cpu_to_le64(rx_ring->lbq.base_indirect_dma);
+		cqicb->lbq_buf_size =
+			cpu_to_le16(QLGE_FIT16(qdev->lbq_buf_size));
+		cqicb->lbq_len = cpu_to_le16(QLGE_FIT16(QLGE_BQ_LEN));
+		rx_ring->lbq.next_to_use = 0;
+		rx_ring->lbq.next_to_clean = 0;
+
+		cqicb->flags |= FLAGS_LS;	/* Load sbq values */
+		dma = (u64)rx_ring->sbq.base_dma;
+		base_indirect_ptr = rx_ring->sbq.base_indirect;
+
+		for (page_entries = 0;
+		     page_entries < MAX_DB_PAGES_PER_BQ(QLGE_BQ_LEN);
+		     page_entries++) {
+			base_indirect_ptr[page_entries] = cpu_to_le64(dma);
+			dma += DB_PAGE_SIZE;
+		}
+		cqicb->sbq_addr =
+			cpu_to_le64(rx_ring->sbq.base_indirect_dma);
+		cqicb->sbq_buf_size = cpu_to_le16(SMALL_BUFFER_SIZE);
+		cqicb->sbq_len = cpu_to_le16(QLGE_FIT16(QLGE_BQ_LEN));
+		rx_ring->sbq.next_to_use = 0;
+		rx_ring->sbq.next_to_clean = 0;
+	}
+	if (rx_ring->cq_id < qdev->rss_ring_count) {
+		/* Inbound completion handling rx_rings run in
+		 * separate NAPI contexts.
+		 */
+		netif_napi_add(qdev->ndev, &rx_ring->napi,
+			       qlge_napi_poll_msix);
+		cqicb->irq_delay = cpu_to_le16(qdev->rx_coalesce_usecs);
+		cqicb->pkt_delay = cpu_to_le16(qdev->rx_max_coalesced_frames);
+	} else {
+		cqicb->irq_delay = cpu_to_le16(qdev->tx_coalesce_usecs);
+		cqicb->pkt_delay = cpu_to_le16(qdev->tx_max_coalesced_frames);
+	}
+	err = qlge_write_cfg(qdev, cqicb, sizeof(struct cqicb),
+			     CFG_LCQ, rx_ring->cq_id);
+	if (err) {
+		netif_err(qdev, ifup, qdev->ndev, "Failed to load CQICB.\n");
+		return err;
+	}
+	return err;
+}
+
+static int qlge_start_tx_ring(struct qlge_adapter *qdev, struct tx_ring *tx_ring)
+{
+	struct wqicb *wqicb = (struct wqicb *)tx_ring;
+	void __iomem *doorbell_area =
+		qdev->doorbell_area + (DB_PAGE_SIZE * tx_ring->wq_id);
+	void *shadow_reg = qdev->tx_ring_shadow_reg_area +
+		(tx_ring->wq_id * sizeof(u64));
+	u64 shadow_reg_dma = qdev->tx_ring_shadow_reg_dma +
+		(tx_ring->wq_id * sizeof(u64));
+	int err = 0;
+
+	/*
+	 * Assign doorbell registers for this tx_ring.
+	 */
+	/* TX PCI doorbell mem area for tx producer index */
+	tx_ring->prod_idx_db_reg = (u32 __iomem *)doorbell_area;
+	tx_ring->prod_idx = 0;
+	/* TX PCI doorbell mem area + 0x04 */
+	tx_ring->valid_db_reg = doorbell_area + 0x04;
+
+	/*
+	 * Assign shadow registers for this tx_ring.
+	 */
+	tx_ring->cnsmr_idx_sh_reg = shadow_reg;
+	tx_ring->cnsmr_idx_sh_reg_dma = shadow_reg_dma;
+
+	wqicb->len = cpu_to_le16(tx_ring->wq_len | Q_LEN_V | Q_LEN_CPP_CONT);
+	wqicb->flags = cpu_to_le16(Q_FLAGS_LC |
+				   Q_FLAGS_LB | Q_FLAGS_LI | Q_FLAGS_LO);
+	wqicb->cq_id_rss = cpu_to_le16(tx_ring->cq_id);
+	wqicb->rid = 0;
+	wqicb->addr = cpu_to_le64(tx_ring->wq_base_dma);
+
+	wqicb->cnsmr_idx_addr = cpu_to_le64(tx_ring->cnsmr_idx_sh_reg_dma);
+
+	qlge_init_tx_ring(qdev, tx_ring);
+
+	err = qlge_write_cfg(qdev, wqicb, sizeof(*wqicb), CFG_LRQ,
+			     (u16)tx_ring->wq_id);
+	if (err) {
+		netif_err(qdev, ifup, qdev->ndev, "Failed to load tx_ring.\n");
+		return err;
+	}
+	return err;
+}
+
+static void qlge_disable_msix(struct qlge_adapter *qdev)
+{
+	if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
+		pci_disable_msix(qdev->pdev);
+		clear_bit(QL_MSIX_ENABLED, &qdev->flags);
+		kfree(qdev->msi_x_entry);
+		qdev->msi_x_entry = NULL;
+	} else if (test_bit(QL_MSI_ENABLED, &qdev->flags)) {
+		pci_disable_msi(qdev->pdev);
+		clear_bit(QL_MSI_ENABLED, &qdev->flags);
+	}
+}
+
+/* We start by trying to get the number of vectors
+ * stored in qdev->intr_count. If we don't get that
+ * many then we reduce the count and try again.
+ */
+static void qlge_enable_msix(struct qlge_adapter *qdev)
+{
+	int i, err;
+
+	/* Get the MSIX vectors. */
+	if (qlge_irq_type == MSIX_IRQ) {
+		/* Try to alloc space for the msix struct,
+		 * if it fails then go to MSI/legacy.
+		 */
+		qdev->msi_x_entry = kcalloc(qdev->intr_count,
+					    sizeof(struct msix_entry),
+					    GFP_KERNEL);
+		if (!qdev->msi_x_entry) {
+			qlge_irq_type = MSI_IRQ;
+			goto msi;
+		}
+
+		for (i = 0; i < qdev->intr_count; i++)
+			qdev->msi_x_entry[i].entry = i;
+
+		err = pci_enable_msix_range(qdev->pdev, qdev->msi_x_entry,
+					    1, qdev->intr_count);
+		if (err < 0) {
+			kfree(qdev->msi_x_entry);
+			qdev->msi_x_entry = NULL;
+			netif_warn(qdev, ifup, qdev->ndev,
+				   "MSI-X Enable failed, trying MSI.\n");
+			qlge_irq_type = MSI_IRQ;
+		} else {
+			qdev->intr_count = err;
+			set_bit(QL_MSIX_ENABLED, &qdev->flags);
+			netif_info(qdev, ifup, qdev->ndev,
+				   "MSI-X Enabled, got %d vectors.\n",
+				   qdev->intr_count);
+			return;
+		}
+	}
+msi:
+	qdev->intr_count = 1;
+	if (qlge_irq_type == MSI_IRQ) {
+		if (pci_alloc_irq_vectors(qdev->pdev, 1, 1, PCI_IRQ_MSI) >= 0) {
+			set_bit(QL_MSI_ENABLED, &qdev->flags);
+			netif_info(qdev, ifup, qdev->ndev,
+				   "Running with MSI interrupts.\n");
+			return;
+		}
+	}
+	qlge_irq_type = LEG_IRQ;
+	set_bit(QL_LEGACY_ENABLED, &qdev->flags);
+	netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+		     "Running with legacy interrupts.\n");
+}
+
+/* Each vector services 1 RSS ring and 1 or more
+ * TX completion rings.  This function loops through
+ * the TX completion rings and assigns the vector that
+ * will service it.  An example would be if there are
+ * 2 vectors (so 2 RSS rings) and 8 TX completion rings.
+ * This would mean that vector 0 would service RSS ring 0
+ * and TX completion rings 0,1,2 and 3.  Vector 1 would
+ * service RSS ring 1 and TX completion rings 4,5,6 and 7.
+ */
+static void qlge_set_tx_vect(struct qlge_adapter *qdev)
+{
+	int i, j, vect;
+	u32 tx_rings_per_vector = qdev->tx_ring_count / qdev->intr_count;
+
+	if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
+		/* Assign irq vectors to TX rx_rings.*/
+		for (vect = 0, j = 0, i = qdev->rss_ring_count;
+		     i < qdev->rx_ring_count; i++) {
+			if (j == tx_rings_per_vector) {
+				vect++;
+				j = 0;
+			}
+			qdev->rx_ring[i].irq = vect;
+			j++;
+		}
+	} else {
+		/* For single vector all rings have an irq
+		 * of zero.
+		 */
+		for (i = 0; i < qdev->rx_ring_count; i++)
+			qdev->rx_ring[i].irq = 0;
+	}
+}
+
+/* Set the interrupt mask for this vector.  Each vector
+ * will service 1 RSS ring and 1 or more TX completion
+ * rings.  This function sets up a bit mask per vector
+ * that indicates which rings it services.
+ */
+static void qlge_set_irq_mask(struct qlge_adapter *qdev, struct intr_context *ctx)
+{
+	int j, vect = ctx->intr;
+	u32 tx_rings_per_vector = qdev->tx_ring_count / qdev->intr_count;
+
+	if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
+		/* Add the RSS ring serviced by this vector
+		 * to the mask.
+		 */
+		ctx->irq_mask = (1 << qdev->rx_ring[vect].cq_id);
+		/* Add the TX ring(s) serviced by this vector
+		 * to the mask.
+		 */
+		for (j = 0; j < tx_rings_per_vector; j++) {
+			ctx->irq_mask |=
+				(1 << qdev->rx_ring[qdev->rss_ring_count +
+				 (vect * tx_rings_per_vector) + j].cq_id);
+		}
+	} else {
+		/* For single vector we just shift each queue's
+		 * ID into the mask.
+		 */
+		for (j = 0; j < qdev->rx_ring_count; j++)
+			ctx->irq_mask |= (1 << qdev->rx_ring[j].cq_id);
+	}
+}
+
+/*
+ * Here we build the intr_context structures based on
+ * our rx_ring count and intr vector count.
+ * The intr_context structure is used to hook each vector
+ * to possibly different handlers.
+ */
+static void qlge_resolve_queues_to_irqs(struct qlge_adapter *qdev)
+{
+	int i = 0;
+	struct intr_context *intr_context = &qdev->intr_context[0];
+
+	if (likely(test_bit(QL_MSIX_ENABLED, &qdev->flags))) {
+		/* Each rx_ring has it's
+		 * own intr_context since we have separate
+		 * vectors for each queue.
+		 */
+		for (i = 0; i < qdev->intr_count; i++, intr_context++) {
+			qdev->rx_ring[i].irq = i;
+			intr_context->intr = i;
+			intr_context->qdev = qdev;
+			/* Set up this vector's bit-mask that indicates
+			 * which queues it services.
+			 */
+			qlge_set_irq_mask(qdev, intr_context);
+			/*
+			 * We set up each vectors enable/disable/read bits so
+			 * there's no bit/mask calculations in the critical path.
+			 */
+			intr_context->intr_en_mask =
+				INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
+				INTR_EN_TYPE_ENABLE | INTR_EN_IHD_MASK | INTR_EN_IHD
+				| i;
+			intr_context->intr_dis_mask =
+				INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
+				INTR_EN_TYPE_DISABLE | INTR_EN_IHD_MASK |
+				INTR_EN_IHD | i;
+			intr_context->intr_read_mask =
+				INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
+				INTR_EN_TYPE_READ | INTR_EN_IHD_MASK | INTR_EN_IHD |
+				i;
+			if (i == 0) {
+				/* The first vector/queue handles
+				 * broadcast/multicast, fatal errors,
+				 * and firmware events.  This in addition
+				 * to normal inbound NAPI processing.
+				 */
+				intr_context->handler = qlge_isr;
+				sprintf(intr_context->name, "%s-rx-%d",
+					qdev->ndev->name, i);
+			} else {
+				/*
+				 * Inbound queues handle unicast frames only.
+				 */
+				intr_context->handler = qlge_msix_rx_isr;
+				sprintf(intr_context->name, "%s-rx-%d",
+					qdev->ndev->name, i);
+			}
+		}
+	} else {
+		/*
+		 * All rx_rings use the same intr_context since
+		 * there is only one vector.
+		 */
+		intr_context->intr = 0;
+		intr_context->qdev = qdev;
+		/*
+		 * We set up each vectors enable/disable/read bits so
+		 * there's no bit/mask calculations in the critical path.
+		 */
+		intr_context->intr_en_mask =
+			INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_ENABLE;
+		intr_context->intr_dis_mask =
+			INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK |
+			INTR_EN_TYPE_DISABLE;
+		if (test_bit(QL_LEGACY_ENABLED, &qdev->flags)) {
+			/* Experience shows that when using INTx interrupts,
+			 * the device does not always auto-mask INTR_EN_EN.
+			 * Moreover, masking INTR_EN_EN manually does not
+			 * immediately prevent interrupt generation.
+			 */
+			intr_context->intr_en_mask |= INTR_EN_EI << 16 |
+				INTR_EN_EI;
+			intr_context->intr_dis_mask |= INTR_EN_EI << 16;
+		}
+		intr_context->intr_read_mask =
+			INTR_EN_TYPE_MASK | INTR_EN_INTR_MASK | INTR_EN_TYPE_READ;
+		/*
+		 * Single interrupt means one handler for all rings.
+		 */
+		intr_context->handler = qlge_isr;
+		sprintf(intr_context->name, "%s-single_irq", qdev->ndev->name);
+		/* Set up this vector's bit-mask that indicates
+		 * which queues it services. In this case there is
+		 * a single vector so it will service all RSS and
+		 * TX completion rings.
+		 */
+		qlge_set_irq_mask(qdev, intr_context);
+	}
+	/* Tell the TX completion rings which MSIx vector
+	 * they will be using.
+	 */
+	qlge_set_tx_vect(qdev);
+}
+
+static void qlge_free_irq(struct qlge_adapter *qdev)
+{
+	int i;
+	struct intr_context *intr_context = &qdev->intr_context[0];
+
+	for (i = 0; i < qdev->intr_count; i++, intr_context++) {
+		if (intr_context->hooked) {
+			if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
+				free_irq(qdev->msi_x_entry[i].vector,
+					 &qdev->rx_ring[i]);
+			} else {
+				free_irq(qdev->pdev->irq, &qdev->rx_ring[0]);
+			}
+		}
+	}
+	qlge_disable_msix(qdev);
+}
+
+static int qlge_request_irq(struct qlge_adapter *qdev)
+{
+	int i;
+	int status = 0;
+	struct pci_dev *pdev = qdev->pdev;
+	struct intr_context *intr_context = &qdev->intr_context[0];
+
+	qlge_resolve_queues_to_irqs(qdev);
+
+	for (i = 0; i < qdev->intr_count; i++, intr_context++) {
+		if (test_bit(QL_MSIX_ENABLED, &qdev->flags)) {
+			status = request_irq(qdev->msi_x_entry[i].vector,
+					     intr_context->handler,
+					     0,
+					     intr_context->name,
+					     &qdev->rx_ring[i]);
+			if (status) {
+				netif_err(qdev, ifup, qdev->ndev,
+					  "Failed request for MSIX interrupt %d.\n",
+					  i);
+				goto err_irq;
+			}
+		} else {
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "trying msi or legacy interrupts.\n");
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "%s: irq = %d.\n", __func__, pdev->irq);
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "%s: context->name = %s.\n", __func__,
+				     intr_context->name);
+			netif_printk(qdev, ifup, KERN_DEBUG, qdev->ndev,
+				     "%s: dev_id = 0x%p.\n", __func__,
+				     &qdev->rx_ring[0]);
+			status =
+				request_irq(pdev->irq, qlge_isr,
+					    test_bit(QL_MSI_ENABLED, &qdev->flags)
+					    ? 0
+					    : IRQF_SHARED,
+					    intr_context->name, &qdev->rx_ring[0]);
+			if (status)
+				goto err_irq;
+
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Hooked intr 0, queue type RX_Q, with name %s.\n",
+				  intr_context->name);
+		}
+		intr_context->hooked = 1;
+	}
+	return status;
+err_irq:
+	netif_err(qdev, ifup, qdev->ndev, "Failed to get the interrupts!!!\n");
+	qlge_free_irq(qdev);
+	return status;
+}
+
+static int qlge_start_rss(struct qlge_adapter *qdev)
+{
+	static const u8 init_hash_seed[] = {
+		0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2,
+		0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0,
+		0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b, 0x30, 0xb4,
+		0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30, 0xf2, 0x0c,
+		0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa
+	};
+	struct ricb *ricb = &qdev->ricb;
+	int status = 0;
+	int i;
+	u8 *hash_id = (u8 *)ricb->hash_cq_id;
+
+	memset((void *)ricb, 0, sizeof(*ricb));
+
+	ricb->base_cq = RSS_L4K;
+	ricb->flags =
+		(RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RT4 | RSS_RT6);
+	ricb->mask = cpu_to_le16((u16)(0x3ff));
+
+	/*
+	 * Fill out the Indirection Table.
+	 */
+	for (i = 0; i < 1024; i++)
+		hash_id[i] = (i & (qdev->rss_ring_count - 1));
+
+	memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40);
+	memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16);
+
+	status = qlge_write_cfg(qdev, ricb, sizeof(*ricb), CFG_LR, 0);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev, "Failed to load RICB.\n");
+		return status;
+	}
+	return status;
+}
+
+static int qlge_clear_routing_entries(struct qlge_adapter *qdev)
+{
+	int i, status = 0;
+
+	status = qlge_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+	/* Clear all the entries in the routing table. */
+	for (i = 0; i < 16; i++) {
+		status = qlge_set_routing_reg(qdev, i, 0, 0);
+		if (status) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to init routing register for CAM packets.\n");
+			break;
+		}
+	}
+	qlge_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
+/* Initialize the frame-to-queue routing. */
+static int qlge_route_initialize(struct qlge_adapter *qdev)
+{
+	int status = 0;
+
+	/* Clear all the entries in the routing table. */
+	status = qlge_clear_routing_entries(qdev);
+	if (status)
+		return status;
+
+	status = qlge_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+
+	status = qlge_set_routing_reg(qdev, RT_IDX_IP_CSUM_ERR_SLOT,
+				      RT_IDX_IP_CSUM_ERR, 1);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init routing register for IP CSUM error packets.\n");
+		goto exit;
+	}
+	status = qlge_set_routing_reg(qdev, RT_IDX_TCP_UDP_CSUM_ERR_SLOT,
+				      RT_IDX_TU_CSUM_ERR, 1);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init routing register for TCP/UDP CSUM error packets.\n");
+		goto exit;
+	}
+	status = qlge_set_routing_reg(qdev, RT_IDX_BCAST_SLOT, RT_IDX_BCAST, 1);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init routing register for broadcast packets.\n");
+		goto exit;
+	}
+	/* If we have more than one inbound queue, then turn on RSS in the
+	 * routing block.
+	 */
+	if (qdev->rss_ring_count > 1) {
+		status = qlge_set_routing_reg(qdev, RT_IDX_RSS_MATCH_SLOT,
+					      RT_IDX_RSS_MATCH, 1);
+		if (status) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to init routing register for MATCH RSS packets.\n");
+			goto exit;
+		}
+	}
+
+	status = qlge_set_routing_reg(qdev, RT_IDX_CAM_HIT_SLOT,
+				      RT_IDX_CAM_HIT, 1);
+	if (status)
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init routing register for CAM packets.\n");
+exit:
+	qlge_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
+int qlge_cam_route_initialize(struct qlge_adapter *qdev)
+{
+	int status, set;
+
+	/* If check if the link is up and use to
+	 * determine if we are setting or clearing
+	 * the MAC address in the CAM.
+	 */
+	set = qlge_read32(qdev, STS);
+	set &= qdev->port_link_up;
+	status = qlge_set_mac_addr(qdev, set);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev, "Failed to init mac address.\n");
+		return status;
+	}
+
+	status = qlge_route_initialize(qdev);
+	if (status)
+		netif_err(qdev, ifup, qdev->ndev, "Failed to init routing table.\n");
+
+	return status;
+}
+
+static int qlge_adapter_initialize(struct qlge_adapter *qdev)
+{
+	u32 value, mask;
+	int i;
+	int status = 0;
+
+	/*
+	 * Set up the System register to halt on errors.
+	 */
+	value = SYS_EFE | SYS_FAE;
+	mask = value << 16;
+	qlge_write32(qdev, SYS, mask | value);
+
+	/* Set the default queue, and VLAN behavior. */
+	value = NIC_RCV_CFG_DFQ;
+	mask = NIC_RCV_CFG_DFQ_MASK;
+	if (qdev->ndev->features & NETIF_F_HW_VLAN_CTAG_RX) {
+		value |= NIC_RCV_CFG_RV;
+		mask |= (NIC_RCV_CFG_RV << 16);
+	}
+	qlge_write32(qdev, NIC_RCV_CFG, (mask | value));
+
+	/* Set the MPI interrupt to enabled. */
+	qlge_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+
+	/* Enable the function, set pagesize, enable error checking. */
+	value = FSC_FE | FSC_EPC_INBOUND | FSC_EPC_OUTBOUND |
+		FSC_EC | FSC_VM_PAGE_4K;
+	value |= SPLT_SETTING;
+
+	/* Set/clear header splitting. */
+	mask = FSC_VM_PAGESIZE_MASK |
+		FSC_DBL_MASK | FSC_DBRST_MASK | (value << 16);
+	qlge_write32(qdev, FSC, mask | value);
+
+	qlge_write32(qdev, SPLT_HDR, SPLT_LEN);
+
+	/* Set RX packet routing to use port/pci function on which the
+	 * packet arrived on in addition to usual frame routing.
+	 * This is helpful on bonding where both interfaces can have
+	 * the same MAC address.
+	 */
+	qlge_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ);
+	/* Reroute all packets to our Interface.
+	 * They may have been routed to MPI firmware
+	 * due to WOL.
+	 */
+	value = qlge_read32(qdev, MGMT_RCV_CFG);
+	value &= ~MGMT_RCV_CFG_RM;
+	mask = 0xffff0000;
+
+	/* Sticky reg needs clearing due to WOL. */
+	qlge_write32(qdev, MGMT_RCV_CFG, mask);
+	qlge_write32(qdev, MGMT_RCV_CFG, mask | value);
+
+	/* Default WOL is enable on Mezz cards */
+	if (qdev->pdev->subsystem_device == 0x0068 ||
+	    qdev->pdev->subsystem_device == 0x0180)
+		qdev->wol = WAKE_MAGIC;
+
+	/* Start up the rx queues. */
+	for (i = 0; i < qdev->rx_ring_count; i++) {
+		status = qlge_start_rx_ring(qdev, &qdev->rx_ring[i]);
+		if (status) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to start rx ring[%d].\n", i);
+			return status;
+		}
+	}
+
+	/* If there is more than one inbound completion queue
+	 * then download a RICB to configure RSS.
+	 */
+	if (qdev->rss_ring_count > 1) {
+		status = qlge_start_rss(qdev);
+		if (status) {
+			netif_err(qdev, ifup, qdev->ndev, "Failed to start RSS.\n");
+			return status;
+		}
+	}
+
+	/* Start up the tx queues. */
+	for (i = 0; i < qdev->tx_ring_count; i++) {
+		status = qlge_start_tx_ring(qdev, &qdev->tx_ring[i]);
+		if (status) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to start tx ring[%d].\n", i);
+			return status;
+		}
+	}
+
+	/* Initialize the port and set the max framesize. */
+	status = qdev->nic_ops->port_initialize(qdev);
+	if (status)
+		netif_err(qdev, ifup, qdev->ndev, "Failed to start port.\n");
+
+	/* Set up the MAC address and frame routing filter. */
+	status = qlge_cam_route_initialize(qdev);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Failed to init CAM/Routing tables.\n");
+		return status;
+	}
+
+	/* Start NAPI for the RSS queues. */
+	for (i = 0; i < qdev->rss_ring_count; i++)
+		napi_enable(&qdev->rx_ring[i].napi);
+
+	return status;
+}
+
+/* Issue soft reset to chip. */
+static int qlge_adapter_reset(struct qlge_adapter *qdev)
+{
+	u32 value;
+	int status = 0;
+	unsigned long end_jiffies;
+
+	/* Clear all the entries in the routing table. */
+	status = qlge_clear_routing_entries(qdev);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev, "Failed to clear routing bits.\n");
+		return status;
+	}
+
+	/* Check if bit is set then skip the mailbox command and
+	 * clear the bit, else we are in normal reset process.
+	 */
+	if (!test_bit(QL_ASIC_RECOVERY, &qdev->flags)) {
+		/* Stop management traffic. */
+		qlge_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
+
+		/* Wait for the NIC and MGMNT FIFOs to empty. */
+		qlge_wait_fifo_empty(qdev);
+	} else {
+		clear_bit(QL_ASIC_RECOVERY, &qdev->flags);
+	}
+
+	qlge_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
+
+	end_jiffies = jiffies + usecs_to_jiffies(30);
+	do {
+		value = qlge_read32(qdev, RST_FO);
+		if ((value & RST_FO_FR) == 0)
+			break;
+		cpu_relax();
+	} while (time_before(jiffies, end_jiffies));
+
+	if (value & RST_FO_FR) {
+		netif_err(qdev, ifdown, qdev->ndev,
+			  "ETIMEDOUT!!! errored out of resetting the chip!\n");
+		status = -ETIMEDOUT;
+	}
+
+	/* Resume management traffic. */
+	qlge_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_RESUME);
+	return status;
+}
+
+static void qlge_display_dev_info(struct net_device *ndev)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	netif_info(qdev, probe, qdev->ndev,
+		   "Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, XG Roll = %d, XG Rev = %d.\n",
+		   qdev->func,
+		   qdev->port,
+		   qdev->chip_rev_id & 0x0000000f,
+		   qdev->chip_rev_id >> 4 & 0x0000000f,
+		   qdev->chip_rev_id >> 8 & 0x0000000f,
+		   qdev->chip_rev_id >> 12 & 0x0000000f);
+	netif_info(qdev, probe, qdev->ndev,
+		   "MAC address %pM\n", ndev->dev_addr);
+}
+
+static int qlge_wol(struct qlge_adapter *qdev)
+{
+	int status = 0;
+	u32 wol = MB_WOL_DISABLE;
+
+	/* The CAM is still intact after a reset, but if we
+	 * are doing WOL, then we may need to program the
+	 * routing regs. We would also need to issue the mailbox
+	 * commands to instruct the MPI what to do per the ethtool
+	 * settings.
+	 */
+
+	if (qdev->wol & (WAKE_ARP | WAKE_MAGICSECURE | WAKE_PHY | WAKE_UCAST |
+			 WAKE_MCAST | WAKE_BCAST)) {
+		netif_err(qdev, ifdown, qdev->ndev,
+			  "Unsupported WOL parameter. qdev->wol = 0x%x.\n",
+			  qdev->wol);
+		return -EINVAL;
+	}
+
+	if (qdev->wol & WAKE_MAGIC) {
+		status = qlge_mb_wol_set_magic(qdev, 1);
+		if (status) {
+			netif_err(qdev, ifdown, qdev->ndev,
+				  "Failed to set magic packet on %s.\n",
+				  qdev->ndev->name);
+			return status;
+		}
+		netif_info(qdev, drv, qdev->ndev,
+			   "Enabled magic packet successfully on %s.\n",
+			   qdev->ndev->name);
+
+		wol |= MB_WOL_MAGIC_PKT;
+	}
+
+	if (qdev->wol) {
+		wol |= MB_WOL_MODE_ON;
+		status = qlge_mb_wol_mode(qdev, wol);
+		netif_err(qdev, drv, qdev->ndev,
+			  "WOL %s (wol code 0x%x) on %s\n",
+			  (status == 0) ? "Successfully set" : "Failed",
+			  wol, qdev->ndev->name);
+	}
+
+	return status;
+}
+
+static void qlge_cancel_all_work_sync(struct qlge_adapter *qdev)
+{
+	/* Don't kill the reset worker thread if we
+	 * are in the process of recovery.
+	 */
+	if (test_bit(QL_ADAPTER_UP, &qdev->flags))
+		cancel_delayed_work_sync(&qdev->asic_reset_work);
+	cancel_delayed_work_sync(&qdev->mpi_reset_work);
+	cancel_delayed_work_sync(&qdev->mpi_work);
+	cancel_delayed_work_sync(&qdev->mpi_idc_work);
+	cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
+}
+
+static int qlge_adapter_down(struct qlge_adapter *qdev)
+{
+	int i, status = 0;
+
+	qlge_link_off(qdev);
+
+	qlge_cancel_all_work_sync(qdev);
+
+	for (i = 0; i < qdev->rss_ring_count; i++)
+		napi_disable(&qdev->rx_ring[i].napi);
+
+	clear_bit(QL_ADAPTER_UP, &qdev->flags);
+
+	qlge_disable_interrupts(qdev);
+
+	qlge_tx_ring_clean(qdev);
+
+	/* Call netif_napi_del() from common point. */
+	for (i = 0; i < qdev->rss_ring_count; i++)
+		netif_napi_del(&qdev->rx_ring[i].napi);
+
+	status = qlge_adapter_reset(qdev);
+	if (status)
+		netif_err(qdev, ifdown, qdev->ndev, "reset(func #%d) FAILED!\n",
+			  qdev->func);
+	qlge_free_rx_buffers(qdev);
+
+	return status;
+}
+
+static int qlge_adapter_up(struct qlge_adapter *qdev)
+{
+	int err = 0;
+
+	err = qlge_adapter_initialize(qdev);
+	if (err) {
+		netif_info(qdev, ifup, qdev->ndev, "Unable to initialize adapter.\n");
+		goto err_init;
+	}
+	set_bit(QL_ADAPTER_UP, &qdev->flags);
+	qlge_alloc_rx_buffers(qdev);
+	/* If the port is initialized and the
+	 * link is up the turn on the carrier.
+	 */
+	if ((qlge_read32(qdev, STS) & qdev->port_init) &&
+	    (qlge_read32(qdev, STS) & qdev->port_link_up))
+		qlge_link_on(qdev);
+	/* Restore rx mode. */
+	clear_bit(QL_ALLMULTI, &qdev->flags);
+	clear_bit(QL_PROMISCUOUS, &qdev->flags);
+	qlge_set_multicast_list(qdev->ndev);
+
+	/* Restore vlan setting. */
+	qlge_restore_vlan(qdev);
+
+	qlge_enable_interrupts(qdev);
+	qlge_enable_all_completion_interrupts(qdev);
+	netif_tx_start_all_queues(qdev->ndev);
+
+	return 0;
+err_init:
+	qlge_adapter_reset(qdev);
+	return err;
+}
+
+static void qlge_release_adapter_resources(struct qlge_adapter *qdev)
+{
+	qlge_free_mem_resources(qdev);
+	qlge_free_irq(qdev);
+}
+
+static int qlge_get_adapter_resources(struct qlge_adapter *qdev)
+{
+	if (qlge_alloc_mem_resources(qdev)) {
+		netif_err(qdev, ifup, qdev->ndev, "Unable to  allocate memory.\n");
+		return -ENOMEM;
+	}
+	return qlge_request_irq(qdev);
+}
+
+static int qlge_close(struct net_device *ndev)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	int i;
+
+	/* If we hit pci_channel_io_perm_failure
+	 * failure condition, then we already
+	 * brought the adapter down.
+	 */
+	if (test_bit(QL_EEH_FATAL, &qdev->flags)) {
+		netif_err(qdev, drv, qdev->ndev, "EEH fatal did unload.\n");
+		clear_bit(QL_EEH_FATAL, &qdev->flags);
+		return 0;
+	}
+
+	/*
+	 * Wait for device to recover from a reset.
+	 * (Rarely happens, but possible.)
+	 */
+	while (!test_bit(QL_ADAPTER_UP, &qdev->flags))
+		msleep(1);
+
+	/* Make sure refill_work doesn't re-enable napi */
+	for (i = 0; i < qdev->rss_ring_count; i++)
+		cancel_delayed_work_sync(&qdev->rx_ring[i].refill_work);
+
+	qlge_adapter_down(qdev);
+	qlge_release_adapter_resources(qdev);
+	return 0;
+}
+
+static void qlge_set_lb_size(struct qlge_adapter *qdev)
+{
+	if (qdev->ndev->mtu <= 1500)
+		qdev->lbq_buf_size = LARGE_BUFFER_MIN_SIZE;
+	else
+		qdev->lbq_buf_size = LARGE_BUFFER_MAX_SIZE;
+	qdev->lbq_buf_order = get_order(qdev->lbq_buf_size);
+}
+
+static int qlge_configure_rings(struct qlge_adapter *qdev)
+{
+	int i;
+	struct rx_ring *rx_ring;
+	struct tx_ring *tx_ring;
+	int cpu_cnt = min_t(int, MAX_CPUS, num_online_cpus());
+
+	/* In a perfect world we have one RSS ring for each CPU
+	 * and each has it's own vector.  To do that we ask for
+	 * cpu_cnt vectors.  qlge_enable_msix() will adjust the
+	 * vector count to what we actually get.  We then
+	 * allocate an RSS ring for each.
+	 * Essentially, we are doing min(cpu_count, msix_vector_count).
+	 */
+	qdev->intr_count = cpu_cnt;
+	qlge_enable_msix(qdev);
+	/* Adjust the RSS ring count to the actual vector count. */
+	qdev->rss_ring_count = qdev->intr_count;
+	qdev->tx_ring_count = cpu_cnt;
+	qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count;
+
+	for (i = 0; i < qdev->tx_ring_count; i++) {
+		tx_ring = &qdev->tx_ring[i];
+		memset((void *)tx_ring, 0, sizeof(*tx_ring));
+		tx_ring->qdev = qdev;
+		tx_ring->wq_id = i;
+		tx_ring->wq_len = qdev->tx_ring_size;
+		tx_ring->wq_size =
+			tx_ring->wq_len * sizeof(struct qlge_ob_mac_iocb_req);
+
+		/*
+		 * The completion queue ID for the tx rings start
+		 * immediately after the rss rings.
+		 */
+		tx_ring->cq_id = qdev->rss_ring_count + i;
+	}
+
+	for (i = 0; i < qdev->rx_ring_count; i++) {
+		rx_ring = &qdev->rx_ring[i];
+		memset((void *)rx_ring, 0, sizeof(*rx_ring));
+		rx_ring->qdev = qdev;
+		rx_ring->cq_id = i;
+		rx_ring->cpu = i % cpu_cnt;	/* CPU to run handler on. */
+		if (i < qdev->rss_ring_count) {
+			/*
+			 * Inbound (RSS) queues.
+			 */
+			rx_ring->cq_len = qdev->rx_ring_size;
+			rx_ring->cq_size =
+				rx_ring->cq_len * sizeof(struct qlge_net_rsp_iocb);
+			rx_ring->lbq.type = QLGE_LB;
+			rx_ring->sbq.type = QLGE_SB;
+			INIT_DELAYED_WORK(&rx_ring->refill_work,
+					  &qlge_slow_refill);
+		} else {
+			/*
+			 * Outbound queue handles outbound completions only.
+			 */
+			/* outbound cq is same size as tx_ring it services. */
+			rx_ring->cq_len = qdev->tx_ring_size;
+			rx_ring->cq_size =
+				rx_ring->cq_len * sizeof(struct qlge_net_rsp_iocb);
+		}
+	}
+	return 0;
+}
+
+static int qlge_open(struct net_device *ndev)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	int err = 0;
+
+	err = qlge_adapter_reset(qdev);
+	if (err)
+		return err;
+
+	qlge_set_lb_size(qdev);
+	err = qlge_configure_rings(qdev);
+	if (err)
+		return err;
+
+	err = qlge_get_adapter_resources(qdev);
+	if (err)
+		goto error_up;
+
+	err = qlge_adapter_up(qdev);
+	if (err)
+		goto error_up;
+
+	return err;
+
+error_up:
+	qlge_release_adapter_resources(qdev);
+	return err;
+}
+
+static int qlge_change_rx_buffers(struct qlge_adapter *qdev)
+{
+	int status;
+
+	/* Wait for an outstanding reset to complete. */
+	if (!test_bit(QL_ADAPTER_UP, &qdev->flags)) {
+		int i = 4;
+
+		while (--i && !test_bit(QL_ADAPTER_UP, &qdev->flags)) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Waiting for adapter UP...\n");
+			ssleep(1);
+		}
+
+		if (!i) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Timed out waiting for adapter UP\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	status = qlge_adapter_down(qdev);
+	if (status)
+		goto error;
+
+	qlge_set_lb_size(qdev);
+
+	status = qlge_adapter_up(qdev);
+	if (status)
+		goto error;
+
+	return status;
+error:
+	netif_alert(qdev, ifup, qdev->ndev,
+		    "Driver up/down cycle failed, closing device.\n");
+	set_bit(QL_ADAPTER_UP, &qdev->flags);
+	dev_close(qdev->ndev);
+	return status;
+}
+
+static int qlge_change_mtu(struct net_device *ndev, int new_mtu)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	int status;
+
+	if (ndev->mtu == 1500 && new_mtu == 9000)
+		netif_err(qdev, ifup, qdev->ndev, "Changing to jumbo MTU.\n");
+	else if (ndev->mtu == 9000 && new_mtu == 1500)
+		netif_err(qdev, ifup, qdev->ndev, "Changing to normal MTU.\n");
+	else
+		return -EINVAL;
+
+	queue_delayed_work(qdev->workqueue,
+			   &qdev->mpi_port_cfg_work, 3 * HZ);
+
+	ndev->mtu = new_mtu;
+
+	if (!netif_running(qdev->ndev))
+		return 0;
+
+	status = qlge_change_rx_buffers(qdev);
+	if (status) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Changing MTU failed.\n");
+	}
+
+	return status;
+}
+
+static struct net_device_stats *qlge_get_stats(struct net_device
+					       *ndev)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	struct rx_ring *rx_ring = &qdev->rx_ring[0];
+	struct tx_ring *tx_ring = &qdev->tx_ring[0];
+	unsigned long pkts, mcast, dropped, errors, bytes;
+	int i;
+
+	/* Get RX stats. */
+	pkts = mcast = dropped = errors = bytes = 0;
+	for (i = 0; i < qdev->rss_ring_count; i++, rx_ring++) {
+		pkts += rx_ring->rx_packets;
+		bytes += rx_ring->rx_bytes;
+		dropped += rx_ring->rx_dropped;
+		errors += rx_ring->rx_errors;
+		mcast += rx_ring->rx_multicast;
+	}
+	ndev->stats.rx_packets = pkts;
+	ndev->stats.rx_bytes = bytes;
+	ndev->stats.rx_dropped = dropped;
+	ndev->stats.rx_errors = errors;
+	ndev->stats.multicast = mcast;
+
+	/* Get TX stats. */
+	pkts = errors = bytes = 0;
+	for (i = 0; i < qdev->tx_ring_count; i++, tx_ring++) {
+		pkts += tx_ring->tx_packets;
+		bytes += tx_ring->tx_bytes;
+		errors += tx_ring->tx_errors;
+	}
+	ndev->stats.tx_packets = pkts;
+	ndev->stats.tx_bytes = bytes;
+	ndev->stats.tx_errors = errors;
+	return &ndev->stats;
+}
+
+static void qlge_set_multicast_list(struct net_device *ndev)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	struct netdev_hw_addr *ha;
+	int i, status;
+
+	status = qlge_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return;
+	/*
+	 * Set or clear promiscuous mode if a
+	 * transition is taking place.
+	 */
+	if (ndev->flags & IFF_PROMISC) {
+		if (!test_bit(QL_PROMISCUOUS, &qdev->flags)) {
+			if (qlge_set_routing_reg
+			    (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 1)) {
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to set promiscuous mode.\n");
+			} else {
+				set_bit(QL_PROMISCUOUS, &qdev->flags);
+			}
+		}
+	} else {
+		if (test_bit(QL_PROMISCUOUS, &qdev->flags)) {
+			if (qlge_set_routing_reg
+			    (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 0)) {
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to clear promiscuous mode.\n");
+			} else {
+				clear_bit(QL_PROMISCUOUS, &qdev->flags);
+			}
+		}
+	}
+
+	/*
+	 * Set or clear all multicast mode if a
+	 * transition is taking place.
+	 */
+	if ((ndev->flags & IFF_ALLMULTI) ||
+	    (netdev_mc_count(ndev) > MAX_MULTICAST_ENTRIES)) {
+		if (!test_bit(QL_ALLMULTI, &qdev->flags)) {
+			if (qlge_set_routing_reg
+			    (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 1)) {
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to set all-multi mode.\n");
+			} else {
+				set_bit(QL_ALLMULTI, &qdev->flags);
+			}
+		}
+	} else {
+		if (test_bit(QL_ALLMULTI, &qdev->flags)) {
+			if (qlge_set_routing_reg
+			    (qdev, RT_IDX_ALLMULTI_SLOT, RT_IDX_MCAST, 0)) {
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to clear all-multi mode.\n");
+			} else {
+				clear_bit(QL_ALLMULTI, &qdev->flags);
+			}
+		}
+	}
+
+	if (!netdev_mc_empty(ndev)) {
+		status = qlge_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+		if (status)
+			goto exit;
+		i = 0;
+		netdev_for_each_mc_addr(ha, ndev) {
+			if (qlge_set_mac_addr_reg(qdev, (u8 *)ha->addr,
+						  MAC_ADDR_TYPE_MULTI_MAC, i)) {
+				netif_err(qdev, hw, qdev->ndev,
+					  "Failed to loadmulticast address.\n");
+				qlge_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+				goto exit;
+			}
+			i++;
+		}
+		qlge_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+		if (qlge_set_routing_reg
+		    (qdev, RT_IDX_MCAST_MATCH_SLOT, RT_IDX_MCAST_MATCH, 1)) {
+			netif_err(qdev, hw, qdev->ndev,
+				  "Failed to set multicast match mode.\n");
+		} else {
+			set_bit(QL_ALLMULTI, &qdev->flags);
+		}
+	}
+exit:
+	qlge_sem_unlock(qdev, SEM_RT_IDX_MASK);
+}
+
+static int qlge_set_mac_address(struct net_device *ndev, void *p)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	struct sockaddr *addr = p;
+	int status;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+	eth_hw_addr_set(ndev, addr->sa_data);
+	/* Update local copy of current mac address. */
+	memcpy(qdev->current_mac_addr, ndev->dev_addr, ndev->addr_len);
+
+	status = qlge_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+	status = qlge_set_mac_addr_reg(qdev, (const u8 *)ndev->dev_addr,
+				       MAC_ADDR_TYPE_CAM_MAC,
+				       qdev->func * MAX_CQ);
+	if (status)
+		netif_err(qdev, hw, qdev->ndev, "Failed to load MAC address.\n");
+	qlge_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	return status;
+}
+
+static void qlge_tx_timeout(struct net_device *ndev, unsigned int txqueue)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+
+	qlge_queue_asic_error(qdev);
+}
+
+static void qlge_asic_reset_work(struct work_struct *work)
+{
+	struct qlge_adapter *qdev =
+		container_of(work, struct qlge_adapter, asic_reset_work.work);
+	int status;
+
+	rtnl_lock();
+	status = qlge_adapter_down(qdev);
+	if (status)
+		goto error;
+
+	status = qlge_adapter_up(qdev);
+	if (status)
+		goto error;
+
+	/* Restore rx mode. */
+	clear_bit(QL_ALLMULTI, &qdev->flags);
+	clear_bit(QL_PROMISCUOUS, &qdev->flags);
+	qlge_set_multicast_list(qdev->ndev);
+
+	rtnl_unlock();
+	return;
+error:
+	netif_alert(qdev, ifup, qdev->ndev,
+		    "Driver up/down cycle failed, closing device\n");
+
+	set_bit(QL_ADAPTER_UP, &qdev->flags);
+	dev_close(qdev->ndev);
+	rtnl_unlock();
+}
+
+static const struct nic_operations qla8012_nic_ops = {
+	.get_flash		= qlge_get_8012_flash_params,
+	.port_initialize	= qlge_8012_port_initialize,
+};
+
+static const struct nic_operations qla8000_nic_ops = {
+	.get_flash		= qlge_get_8000_flash_params,
+	.port_initialize	= qlge_8000_port_initialize,
+};
+
+/* Find the pcie function number for the other NIC
+ * on this chip.  Since both NIC functions share a
+ * common firmware we have the lowest enabled function
+ * do any common work.  Examples would be resetting
+ * after a fatal firmware error, or doing a firmware
+ * coredump.
+ */
+static int qlge_get_alt_pcie_func(struct qlge_adapter *qdev)
+{
+	int status = 0;
+	u32 temp;
+	u32 nic_func1, nic_func2;
+
+	status = qlge_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
+				   &temp);
+	if (status)
+		return status;
+
+	nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
+		     MPI_TEST_NIC_FUNC_MASK);
+	nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
+		     MPI_TEST_NIC_FUNC_MASK);
+
+	if (qdev->func == nic_func1)
+		qdev->alt_func = nic_func2;
+	else if (qdev->func == nic_func2)
+		qdev->alt_func = nic_func1;
+	else
+		status = -EIO;
+
+	return status;
+}
+
+static int qlge_get_board_info(struct qlge_adapter *qdev)
+{
+	int status;
+
+	qdev->func =
+		(qlge_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
+	if (qdev->func > 3)
+		return -EIO;
+
+	status = qlge_get_alt_pcie_func(qdev);
+	if (status)
+		return status;
+
+	qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
+	if (qdev->port) {
+		qdev->xg_sem_mask = SEM_XGMAC1_MASK;
+		qdev->port_link_up = STS_PL1;
+		qdev->port_init = STS_PI1;
+		qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBI;
+		qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC2_MBO;
+	} else {
+		qdev->xg_sem_mask = SEM_XGMAC0_MASK;
+		qdev->port_link_up = STS_PL0;
+		qdev->port_init = STS_PI0;
+		qdev->mailbox_in = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBI;
+		qdev->mailbox_out = PROC_ADDR_MPI_RISC | PROC_ADDR_FUNC0_MBO;
+	}
+	qdev->chip_rev_id = qlge_read32(qdev, REV_ID);
+	qdev->device_id = qdev->pdev->device;
+	if (qdev->device_id == QLGE_DEVICE_ID_8012)
+		qdev->nic_ops = &qla8012_nic_ops;
+	else if (qdev->device_id == QLGE_DEVICE_ID_8000)
+		qdev->nic_ops = &qla8000_nic_ops;
+	return status;
+}
+
+static void qlge_release_all(struct pci_dev *pdev)
+{
+	struct qlge_adapter *qdev = pci_get_drvdata(pdev);
+
+	if (qdev->workqueue) {
+		destroy_workqueue(qdev->workqueue);
+		qdev->workqueue = NULL;
+	}
+
+	if (qdev->reg_base)
+		iounmap(qdev->reg_base);
+	if (qdev->doorbell_area)
+		iounmap(qdev->doorbell_area);
+	vfree(qdev->mpi_coredump);
+	pci_release_regions(pdev);
+}
+
+static int qlge_init_device(struct pci_dev *pdev, struct qlge_adapter *qdev,
+			    int cards_found)
+{
+	struct net_device *ndev = qdev->ndev;
+	int err = 0;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "PCI device enable failed.\n");
+		return err;
+	}
+
+	qdev->pdev = pdev;
+	pci_set_drvdata(pdev, qdev);
+
+	/* Set PCIe read request size */
+	err = pcie_set_readrq(pdev, 4096);
+	if (err) {
+		dev_err(&pdev->dev, "Set readrq failed.\n");
+		goto err_disable_pci;
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err) {
+		dev_err(&pdev->dev, "PCI region request failed.\n");
+		goto err_disable_pci;
+	}
+
+	pci_set_master(pdev);
+	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+		set_bit(QL_DMA64, &qdev->flags);
+		err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+	} else {
+		err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+		if (!err)
+			err = dma_set_coherent_mask(&pdev->dev,
+						    DMA_BIT_MASK(32));
+	}
+
+	if (err) {
+		dev_err(&pdev->dev, "No usable DMA configuration.\n");
+		goto err_release_pci;
+	}
+
+	/* Set PCIe reset type for EEH to fundamental. */
+	pdev->needs_freset = 1;
+	pci_save_state(pdev);
+	qdev->reg_base =
+		ioremap(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1));
+	if (!qdev->reg_base) {
+		dev_err(&pdev->dev, "Register mapping failed.\n");
+		err = -ENOMEM;
+		goto err_release_pci;
+	}
+
+	qdev->doorbell_area_size = pci_resource_len(pdev, 3);
+	qdev->doorbell_area =
+		ioremap(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3));
+	if (!qdev->doorbell_area) {
+		dev_err(&pdev->dev, "Doorbell register mapping failed.\n");
+		err = -ENOMEM;
+		goto err_iounmap_base;
+	}
+
+	err = qlge_get_board_info(qdev);
+	if (err) {
+		dev_err(&pdev->dev, "Register access failed.\n");
+		err = -EIO;
+		goto err_iounmap_doorbell;
+	}
+	qdev->msg_enable = netif_msg_init(debug, default_msg);
+	spin_lock_init(&qdev->stats_lock);
+
+	if (qlge_mpi_coredump) {
+		qdev->mpi_coredump =
+			vmalloc(sizeof(struct qlge_mpi_coredump));
+		if (!qdev->mpi_coredump) {
+			err = -ENOMEM;
+			goto err_iounmap_doorbell;
+		}
+		if (qlge_force_coredump)
+			set_bit(QL_FRC_COREDUMP, &qdev->flags);
+	}
+	/* make sure the EEPROM is good */
+	err = qdev->nic_ops->get_flash(qdev);
+	if (err) {
+		dev_err(&pdev->dev, "Invalid FLASH.\n");
+		goto err_free_mpi_coredump;
+	}
+
+	/* Keep local copy of current mac address. */
+	memcpy(qdev->current_mac_addr, ndev->dev_addr, ndev->addr_len);
+
+	/* Set up the default ring sizes. */
+	qdev->tx_ring_size = NUM_TX_RING_ENTRIES;
+	qdev->rx_ring_size = NUM_RX_RING_ENTRIES;
+
+	/* Set up the coalescing parameters. */
+	qdev->rx_coalesce_usecs = DFLT_COALESCE_WAIT;
+	qdev->tx_coalesce_usecs = DFLT_COALESCE_WAIT;
+	qdev->rx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT;
+	qdev->tx_max_coalesced_frames = DFLT_INTER_FRAME_WAIT;
+
+	/*
+	 * Set up the operating parameters.
+	 */
+	qdev->workqueue = alloc_ordered_workqueue("%s", WQ_MEM_RECLAIM,
+						  ndev->name);
+	if (!qdev->workqueue) {
+		err = -ENOMEM;
+		goto err_free_mpi_coredump;
+	}
+
+	INIT_DELAYED_WORK(&qdev->asic_reset_work, qlge_asic_reset_work);
+	INIT_DELAYED_WORK(&qdev->mpi_reset_work, qlge_mpi_reset_work);
+	INIT_DELAYED_WORK(&qdev->mpi_work, qlge_mpi_work);
+	INIT_DELAYED_WORK(&qdev->mpi_port_cfg_work, qlge_mpi_port_cfg_work);
+	INIT_DELAYED_WORK(&qdev->mpi_idc_work, qlge_mpi_idc_work);
+	init_completion(&qdev->ide_completion);
+	mutex_init(&qdev->mpi_mutex);
+
+	if (!cards_found) {
+		dev_info(&pdev->dev, "%s\n", DRV_STRING);
+		dev_info(&pdev->dev, "Driver name: %s, Version: %s.\n",
+			 DRV_NAME, DRV_VERSION);
+	}
+	return 0;
+
+err_free_mpi_coredump:
+	vfree(qdev->mpi_coredump);
+err_iounmap_doorbell:
+	iounmap(qdev->doorbell_area);
+err_iounmap_base:
+	iounmap(qdev->reg_base);
+err_release_pci:
+	pci_release_regions(pdev);
+err_disable_pci:
+	pci_disable_device(pdev);
+
+	return err;
+}
+
+static const struct net_device_ops qlge_netdev_ops = {
+	.ndo_open		= qlge_open,
+	.ndo_stop		= qlge_close,
+	.ndo_start_xmit		= qlge_send,
+	.ndo_change_mtu		= qlge_change_mtu,
+	.ndo_get_stats		= qlge_get_stats,
+	.ndo_set_rx_mode	= qlge_set_multicast_list,
+	.ndo_set_mac_address	= qlge_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_tx_timeout		= qlge_tx_timeout,
+	.ndo_set_features	= qlge_set_features,
+	.ndo_vlan_rx_add_vid	= qlge_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= qlge_vlan_rx_kill_vid,
+};
+
+static void qlge_timer(struct timer_list *t)
+{
+	struct qlge_adapter *qdev = from_timer(qdev, t, timer);
+	u32 var = 0;
+
+	var = qlge_read32(qdev, STS);
+	if (pci_channel_offline(qdev->pdev)) {
+		netif_err(qdev, ifup, qdev->ndev, "EEH STS = 0x%.08x.\n", var);
+		return;
+	}
+
+	mod_timer(&qdev->timer, jiffies + (5 * HZ));
+}
+
+static const struct devlink_ops qlge_devlink_ops;
+
+static int qlge_probe(struct pci_dev *pdev,
+		      const struct pci_device_id *pci_entry)
+{
+	struct qlge_netdev_priv *ndev_priv;
+	struct qlge_adapter *qdev = NULL;
+	struct net_device *ndev = NULL;
+	struct devlink *devlink;
+	static int cards_found;
+	int err;
+
+	devlink = devlink_alloc(&qlge_devlink_ops, sizeof(struct qlge_adapter),
+				&pdev->dev);
+	if (!devlink)
+		return -ENOMEM;
+
+	qdev = devlink_priv(devlink);
+
+	ndev = alloc_etherdev_mq(sizeof(struct qlge_netdev_priv),
+				 min(MAX_CPUS,
+				     netif_get_num_default_rss_queues()));
+	if (!ndev) {
+		err = -ENOMEM;
+		goto devlink_free;
+	}
+
+	ndev_priv = netdev_priv(ndev);
+	ndev_priv->qdev = qdev;
+	ndev_priv->ndev = ndev;
+	qdev->ndev = ndev;
+	err = qlge_init_device(pdev, qdev, cards_found);
+	if (err < 0)
+		goto netdev_free;
+
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	ndev->hw_features = NETIF_F_SG |
+		NETIF_F_IP_CSUM |
+		NETIF_F_TSO |
+		NETIF_F_TSO_ECN |
+		NETIF_F_HW_VLAN_CTAG_TX |
+		NETIF_F_HW_VLAN_CTAG_RX |
+		NETIF_F_HW_VLAN_CTAG_FILTER |
+		NETIF_F_RXCSUM;
+	ndev->features = ndev->hw_features;
+	ndev->vlan_features = ndev->hw_features;
+	/* vlan gets same features (except vlan filter) */
+	ndev->vlan_features &= ~(NETIF_F_HW_VLAN_CTAG_FILTER |
+				 NETIF_F_HW_VLAN_CTAG_TX |
+				 NETIF_F_HW_VLAN_CTAG_RX);
+
+	if (test_bit(QL_DMA64, &qdev->flags))
+		ndev->features |= NETIF_F_HIGHDMA;
+
+	/*
+	 * Set up net_device structure.
+	 */
+	ndev->tx_queue_len = qdev->tx_ring_size;
+	ndev->irq = pdev->irq;
+
+	ndev->netdev_ops = &qlge_netdev_ops;
+	ndev->ethtool_ops = &qlge_ethtool_ops;
+	ndev->watchdog_timeo = 10 * HZ;
+
+	/* MTU range: this driver only supports 1500 or 9000, so this only
+	 * filters out values above or below, and we'll rely on
+	 * qlge_change_mtu to make sure only 1500 or 9000 are allowed
+	 */
+	ndev->min_mtu = ETH_DATA_LEN;
+	ndev->max_mtu = 9000;
+
+	err = register_netdev(ndev);
+	if (err) {
+		dev_err(&pdev->dev, "net device registration failed.\n");
+		goto cleanup_pdev;
+	}
+
+	err = qlge_health_create_reporters(qdev);
+	if (err)
+		goto unregister_netdev;
+
+	/* Start up the timer to trigger EEH if
+	 * the bus goes dead
+	 */
+	timer_setup(&qdev->timer, qlge_timer, TIMER_DEFERRABLE);
+	mod_timer(&qdev->timer, jiffies + (5 * HZ));
+	qlge_link_off(qdev);
+	qlge_display_dev_info(ndev);
+	atomic_set(&qdev->lb_count, 0);
+	cards_found++;
+	devlink_register(devlink);
+	return 0;
+
+unregister_netdev:
+	unregister_netdev(ndev);
+cleanup_pdev:
+	qlge_release_all(pdev);
+	pci_disable_device(pdev);
+netdev_free:
+	free_netdev(ndev);
+devlink_free:
+	devlink_free(devlink);
+
+	return err;
+}
+
+netdev_tx_t qlge_lb_send(struct sk_buff *skb, struct net_device *ndev)
+{
+	return qlge_send(skb, ndev);
+}
+
+int qlge_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget)
+{
+	return qlge_clean_inbound_rx_ring(rx_ring, budget);
+}
+
+static void qlge_remove(struct pci_dev *pdev)
+{
+	struct qlge_adapter *qdev = pci_get_drvdata(pdev);
+	struct net_device *ndev = qdev->ndev;
+	struct devlink *devlink = priv_to_devlink(qdev);
+
+	devlink_unregister(devlink);
+	del_timer_sync(&qdev->timer);
+	qlge_cancel_all_work_sync(qdev);
+	unregister_netdev(ndev);
+	qlge_release_all(pdev);
+	pci_disable_device(pdev);
+	devlink_health_reporter_destroy(qdev->reporter);
+	devlink_free(devlink);
+	free_netdev(ndev);
+}
+
+/* Clean up resources without touching hardware. */
+static void qlge_eeh_close(struct net_device *ndev)
+{
+	struct qlge_adapter *qdev = netdev_to_qdev(ndev);
+	int i;
+
+	if (netif_carrier_ok(ndev)) {
+		netif_carrier_off(ndev);
+		netif_stop_queue(ndev);
+	}
+
+	/* Disabling the timer */
+	qlge_cancel_all_work_sync(qdev);
+
+	for (i = 0; i < qdev->rss_ring_count; i++)
+		netif_napi_del(&qdev->rx_ring[i].napi);
+
+	clear_bit(QL_ADAPTER_UP, &qdev->flags);
+	qlge_tx_ring_clean(qdev);
+	qlge_free_rx_buffers(qdev);
+	qlge_release_adapter_resources(qdev);
+}
+
+/*
+ * This callback is called by the PCI subsystem whenever
+ * a PCI bus error is detected.
+ */
+static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev,
+					       pci_channel_state_t state)
+{
+	struct qlge_adapter *qdev = pci_get_drvdata(pdev);
+	struct net_device *ndev = qdev->ndev;
+
+	switch (state) {
+	case pci_channel_io_normal:
+		return PCI_ERS_RESULT_CAN_RECOVER;
+	case pci_channel_io_frozen:
+		netif_device_detach(ndev);
+		del_timer_sync(&qdev->timer);
+		if (netif_running(ndev))
+			qlge_eeh_close(ndev);
+		pci_disable_device(pdev);
+		return PCI_ERS_RESULT_NEED_RESET;
+	case pci_channel_io_perm_failure:
+		dev_err(&pdev->dev,
+			"%s: pci_channel_io_perm_failure.\n", __func__);
+		del_timer_sync(&qdev->timer);
+		qlge_eeh_close(ndev);
+		set_bit(QL_EEH_FATAL, &qdev->flags);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	/* Request a slot reset. */
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/*
+ * This callback is called after the PCI buss has been reset.
+ * Basically, this tries to restart the card from scratch.
+ * This is a shortened version of the device probe/discovery code,
+ * it resembles the first-half of the () routine.
+ */
+static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev)
+{
+	struct qlge_adapter *qdev = pci_get_drvdata(pdev);
+
+	pdev->error_state = pci_channel_io_normal;
+
+	pci_restore_state(pdev);
+	if (pci_enable_device(pdev)) {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Cannot re-enable PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	pci_set_master(pdev);
+
+	if (qlge_adapter_reset(qdev)) {
+		netif_err(qdev, drv, qdev->ndev, "reset FAILED!\n");
+		set_bit(QL_EEH_FATAL, &qdev->flags);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void qlge_io_resume(struct pci_dev *pdev)
+{
+	struct qlge_adapter *qdev = pci_get_drvdata(pdev);
+	struct net_device *ndev = qdev->ndev;
+	int err = 0;
+
+	if (netif_running(ndev)) {
+		err = qlge_open(ndev);
+		if (err) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Device initialization failed after reset.\n");
+			return;
+		}
+	} else {
+		netif_err(qdev, ifup, qdev->ndev,
+			  "Device was not running prior to EEH.\n");
+	}
+	mod_timer(&qdev->timer, jiffies + (5 * HZ));
+	netif_device_attach(ndev);
+}
+
+static const struct pci_error_handlers qlge_err_handler = {
+	.error_detected = qlge_io_error_detected,
+	.slot_reset = qlge_io_slot_reset,
+	.resume = qlge_io_resume,
+};
+
+static int __maybe_unused qlge_suspend(struct device *dev_d)
+{
+	struct pci_dev *pdev = to_pci_dev(dev_d);
+	struct qlge_adapter *qdev;
+	struct net_device *ndev;
+	int err;
+
+	qdev = pci_get_drvdata(pdev);
+	ndev = qdev->ndev;
+	netif_device_detach(ndev);
+	del_timer_sync(&qdev->timer);
+
+	if (netif_running(ndev)) {
+		err = qlge_adapter_down(qdev);
+		if (!err)
+			return err;
+	}
+
+	qlge_wol(qdev);
+
+	return 0;
+}
+
+static int __maybe_unused qlge_resume(struct device *dev_d)
+{
+	struct pci_dev *pdev = to_pci_dev(dev_d);
+	struct qlge_adapter *qdev;
+	struct net_device *ndev;
+	int err;
+
+	qdev = pci_get_drvdata(pdev);
+	ndev = qdev->ndev;
+
+	pci_set_master(pdev);
+
+	device_wakeup_disable(dev_d);
+
+	if (netif_running(ndev)) {
+		err = qlge_adapter_up(qdev);
+		if (err)
+			return err;
+	}
+
+	mod_timer(&qdev->timer, jiffies + (5 * HZ));
+	netif_device_attach(ndev);
+
+	return 0;
+}
+
+static void qlge_shutdown(struct pci_dev *pdev)
+{
+	qlge_suspend(&pdev->dev);
+}
+
+static SIMPLE_DEV_PM_OPS(qlge_pm_ops, qlge_suspend, qlge_resume);
+
+static struct pci_driver qlge_driver = {
+	.name = DRV_NAME,
+	.id_table = qlge_pci_tbl,
+	.probe = qlge_probe,
+	.remove = qlge_remove,
+	.driver.pm = &qlge_pm_ops,
+	.shutdown = qlge_shutdown,
+	.err_handler = &qlge_err_handler
+};
+
+module_pci_driver(qlge_driver);
diff --git a/drivers/staging/qlge/qlge_mpi.c b/drivers/staging/qlge/qlge_mpi.c
new file mode 100644
index 000000000000..96a4de6d2b34
--- /dev/null
+++ b/drivers/staging/qlge/qlge_mpi.c
@@ -0,0 +1,1273 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#include "qlge.h"
+
+int qlge_unpause_mpi_risc(struct qlge_adapter *qdev)
+{
+	u32 tmp;
+
+	/* Un-pause the RISC */
+	tmp = qlge_read32(qdev, CSR);
+	if (!(tmp & CSR_RP))
+		return -EIO;
+
+	qlge_write32(qdev, CSR, CSR_CMD_CLR_PAUSE);
+	return 0;
+}
+
+int qlge_pause_mpi_risc(struct qlge_adapter *qdev)
+{
+	u32 tmp;
+	int count;
+
+	/* Pause the RISC */
+	qlge_write32(qdev, CSR, CSR_CMD_SET_PAUSE);
+	for (count = UDELAY_COUNT; count; count--) {
+		tmp = qlge_read32(qdev, CSR);
+		if (tmp & CSR_RP)
+			break;
+		mdelay(UDELAY_DELAY);
+	}
+	return (count == 0) ? -ETIMEDOUT : 0;
+}
+
+int qlge_hard_reset_mpi_risc(struct qlge_adapter *qdev)
+{
+	u32 tmp;
+	int count;
+
+	/* Reset the RISC */
+	qlge_write32(qdev, CSR, CSR_CMD_SET_RST);
+	for (count = UDELAY_COUNT; count; count--) {
+		tmp = qlge_read32(qdev, CSR);
+		if (tmp & CSR_RR) {
+			qlge_write32(qdev, CSR, CSR_CMD_CLR_RST);
+			break;
+		}
+		mdelay(UDELAY_DELAY);
+	}
+	return (count == 0) ? -ETIMEDOUT : 0;
+}
+
+int qlge_read_mpi_reg(struct qlge_adapter *qdev, u32 reg, u32 *data)
+{
+	int status;
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
+	if (status)
+		goto exit;
+	/* set up for reg read */
+	qlge_write32(qdev, PROC_ADDR, reg | PROC_ADDR_R);
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
+	if (status)
+		goto exit;
+	/* get the data */
+	*data = qlge_read32(qdev, PROC_DATA);
+exit:
+	return status;
+}
+
+int qlge_write_mpi_reg(struct qlge_adapter *qdev, u32 reg, u32 data)
+{
+	int status = 0;
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
+	if (status)
+		goto exit;
+	/* write the data to the data reg */
+	qlge_write32(qdev, PROC_DATA, data);
+	/* trigger the write */
+	qlge_write32(qdev, PROC_ADDR, reg);
+	/* wait for reg to come ready */
+	status = qlge_wait_reg_rdy(qdev, PROC_ADDR, PROC_ADDR_RDY, PROC_ADDR_ERR);
+	if (status)
+		goto exit;
+exit:
+	return status;
+}
+
+int qlge_soft_reset_mpi_risc(struct qlge_adapter *qdev)
+{
+	return qlge_write_mpi_reg(qdev, 0x00001010, 1);
+}
+
+/* Determine if we are in charge of the firmware. If
+ * we are the lower of the 2 NIC pcie functions, or if
+ * we are the higher function and the lower function
+ * is not enabled.
+ */
+int qlge_own_firmware(struct qlge_adapter *qdev)
+{
+	u32 temp;
+
+	/* If we are the lower of the 2 NIC functions
+	 * on the chip the we are responsible for
+	 * core dump and firmware reset after an error.
+	 */
+	if (qdev->func < qdev->alt_func)
+		return 1;
+
+	/* If we are the higher of the 2 NIC functions
+	 * on the chip and the lower function is not
+	 * enabled, then we are responsible for
+	 * core dump and firmware reset after an error.
+	 */
+	temp =  qlge_read32(qdev, STS);
+	if (!(temp & (1 << (8 + qdev->alt_func))))
+		return 1;
+
+	return 0;
+}
+
+static int qlge_get_mb_sts(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int i, status;
+
+	status = qlge_sem_spinlock(qdev, SEM_PROC_REG_MASK);
+	if (status)
+		return -EBUSY;
+	for (i = 0; i < mbcp->out_count; i++) {
+		status =
+		    qlge_read_mpi_reg(qdev, qdev->mailbox_out + i,
+				      &mbcp->mbox_out[i]);
+		if (status) {
+			netif_err(qdev, drv, qdev->ndev, "Failed mailbox read.\n");
+			break;
+		}
+	}
+	qlge_sem_unlock(qdev, SEM_PROC_REG_MASK);	/* does flush too */
+	return status;
+}
+
+/* Wait for a single mailbox command to complete.
+ * Returns zero on success.
+ */
+static int qlge_wait_mbx_cmd_cmplt(struct qlge_adapter *qdev)
+{
+	int count;
+	u32 value;
+
+	for (count = 100; count; count--) {
+		value = qlge_read32(qdev, STS);
+		if (value & STS_PI)
+			return 0;
+		mdelay(UDELAY_DELAY); /* 100ms */
+	}
+	return -ETIMEDOUT;
+}
+
+/* Execute a single mailbox command.
+ * Caller must hold PROC_ADDR semaphore.
+ */
+static int qlge_exec_mb_cmd(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int i, status;
+
+	/*
+	 * Make sure there's nothing pending.
+	 * This shouldn't happen.
+	 */
+	if (qlge_read32(qdev, CSR) & CSR_HRI)
+		return -EIO;
+
+	status = qlge_sem_spinlock(qdev, SEM_PROC_REG_MASK);
+	if (status)
+		return status;
+
+	/*
+	 * Fill the outbound mailboxes.
+	 */
+	for (i = 0; i < mbcp->in_count; i++) {
+		status = qlge_write_mpi_reg(qdev, qdev->mailbox_in + i,
+					    mbcp->mbox_in[i]);
+		if (status)
+			goto end;
+	}
+	/*
+	 * Wake up the MPI firmware.
+	 */
+	qlge_write32(qdev, CSR, CSR_CMD_SET_H2R_INT);
+end:
+	qlge_sem_unlock(qdev, SEM_PROC_REG_MASK);
+	return status;
+}
+
+/* We are being asked by firmware to accept
+ * a change to the port.  This is only
+ * a change to max frame sizes (Tx/Rx), pause
+ * parameters, or loopback mode. We wake up a worker
+ * to handler processing this since a mailbox command
+ * will need to be sent to ACK the request.
+ */
+static int qlge_idc_req_aen(struct qlge_adapter *qdev)
+{
+	int status;
+	struct mbox_params *mbcp = &qdev->idc_mbc;
+
+	netif_err(qdev, drv, qdev->ndev, "Enter!\n");
+	/* Get the status data and start up a thread to
+	 * handle the request.
+	 */
+	mbcp->out_count = 4;
+	status = qlge_get_mb_sts(qdev, mbcp);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Could not read MPI, resetting ASIC!\n");
+		qlge_queue_asic_error(qdev);
+	} else	{
+		/* Begin polled mode early so
+		 * we don't get another interrupt
+		 * when we leave mpi_worker.
+		 */
+		qlge_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
+		queue_delayed_work(qdev->workqueue, &qdev->mpi_idc_work, 0);
+	}
+	return status;
+}
+
+/* Process an inter-device event completion.
+ * If good, signal the caller's completion.
+ */
+static int qlge_idc_cmplt_aen(struct qlge_adapter *qdev)
+{
+	int status;
+	struct mbox_params *mbcp = &qdev->idc_mbc;
+
+	mbcp->out_count = 4;
+	status = qlge_get_mb_sts(qdev, mbcp);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Could not read MPI, resetting RISC!\n");
+		qlge_queue_fw_error(qdev);
+	} else {
+		/* Wake up the sleeping mpi_idc_work thread that is
+		 * waiting for this event.
+		 */
+		complete(&qdev->ide_completion);
+	}
+	return status;
+}
+
+static void qlge_link_up(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int status;
+
+	mbcp->out_count = 2;
+
+	status = qlge_get_mb_sts(qdev, mbcp);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "%s: Could not get mailbox status.\n", __func__);
+		return;
+	}
+
+	qdev->link_status = mbcp->mbox_out[1];
+	netif_err(qdev, drv, qdev->ndev, "Link Up.\n");
+
+	/* If we're coming back from an IDC event
+	 * then set up the CAM and frame routing.
+	 */
+	if (test_bit(QL_CAM_RT_SET, &qdev->flags)) {
+		status = qlge_cam_route_initialize(qdev);
+		if (status) {
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to init CAM/Routing tables.\n");
+			return;
+		}
+		clear_bit(QL_CAM_RT_SET, &qdev->flags);
+	}
+
+	/* Queue up a worker to check the frame
+	 * size information, and fix it if it's not
+	 * to our liking.
+	 */
+	if (!test_bit(QL_PORT_CFG, &qdev->flags)) {
+		netif_err(qdev, drv, qdev->ndev, "Queue Port Config Worker!\n");
+		set_bit(QL_PORT_CFG, &qdev->flags);
+		/* Begin polled mode early so
+		 * we don't get another interrupt
+		 * when we leave mpi_worker dpc.
+		 */
+		qlge_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
+		queue_delayed_work(qdev->workqueue,
+				   &qdev->mpi_port_cfg_work, 0);
+	}
+
+	qlge_link_on(qdev);
+}
+
+static void qlge_link_down(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int status;
+
+	mbcp->out_count = 3;
+
+	status = qlge_get_mb_sts(qdev, mbcp);
+	if (status)
+		netif_err(qdev, drv, qdev->ndev, "Link down AEN broken!\n");
+
+	qlge_link_off(qdev);
+}
+
+static int qlge_sfp_in(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int status;
+
+	mbcp->out_count = 5;
+
+	status = qlge_get_mb_sts(qdev, mbcp);
+	if (status)
+		netif_err(qdev, drv, qdev->ndev, "SFP in AEN broken!\n");
+	else
+		netif_err(qdev, drv, qdev->ndev, "SFP insertion detected.\n");
+
+	return status;
+}
+
+static int qlge_sfp_out(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int status;
+
+	mbcp->out_count = 1;
+
+	status = qlge_get_mb_sts(qdev, mbcp);
+	if (status)
+		netif_err(qdev, drv, qdev->ndev, "SFP out AEN broken!\n");
+	else
+		netif_err(qdev, drv, qdev->ndev, "SFP removal detected.\n");
+
+	return status;
+}
+
+static int qlge_aen_lost(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int status;
+
+	mbcp->out_count = 6;
+
+	status = qlge_get_mb_sts(qdev, mbcp);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev, "Lost AEN broken!\n");
+	} else {
+		int i;
+
+		netif_err(qdev, drv, qdev->ndev, "Lost AEN detected.\n");
+		for (i = 0; i < mbcp->out_count; i++)
+			netif_err(qdev, drv, qdev->ndev, "mbox_out[%d] = 0x%.08x.\n",
+				  i, mbcp->mbox_out[i]);
+	}
+
+	return status;
+}
+
+static void qlge_init_fw_done(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int status;
+
+	mbcp->out_count = 2;
+
+	status = qlge_get_mb_sts(qdev, mbcp);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev, "Firmware did not initialize!\n");
+	} else {
+		netif_err(qdev, drv, qdev->ndev, "Firmware Revision  = 0x%.08x.\n",
+			  mbcp->mbox_out[1]);
+		qdev->fw_rev_id = mbcp->mbox_out[1];
+		status = qlge_cam_route_initialize(qdev);
+		if (status)
+			netif_err(qdev, ifup, qdev->ndev,
+				  "Failed to init CAM/Routing tables.\n");
+	}
+}
+
+/* Process an async event and clear it unless it's an
+ * error condition.
+ *  This can get called iteratively from the mpi_work thread
+ *  when events arrive via an interrupt.
+ *  It also gets called when a mailbox command is polling for
+ *  it's completion.
+ */
+static int qlge_mpi_handler(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int status;
+	int orig_count = mbcp->out_count;
+
+	/* Just get mailbox zero for now. */
+	mbcp->out_count = 1;
+	status = qlge_get_mb_sts(qdev, mbcp);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Could not read MPI, resetting ASIC!\n");
+		qlge_queue_asic_error(qdev);
+		goto end;
+	}
+
+	switch (mbcp->mbox_out[0]) {
+		/* This case is only active when we arrive here
+		 * as a result of issuing a mailbox command to
+		 * the firmware.
+		 */
+	case MB_CMD_STS_INTRMDT:
+	case MB_CMD_STS_GOOD:
+	case MB_CMD_STS_INVLD_CMD:
+	case MB_CMD_STS_XFC_ERR:
+	case MB_CMD_STS_CSUM_ERR:
+	case MB_CMD_STS_ERR:
+	case MB_CMD_STS_PARAM_ERR:
+		/* We can only get mailbox status if we're polling from an
+		 * unfinished command.  Get the rest of the status data and
+		 * return back to the caller.
+		 * We only end up here when we're polling for a mailbox
+		 * command completion.
+		 */
+		mbcp->out_count = orig_count;
+		status = qlge_get_mb_sts(qdev, mbcp);
+		return status;
+
+		/* We are being asked by firmware to accept
+		 * a change to the port.  This is only
+		 * a change to max frame sizes (Tx/Rx), pause
+		 * parameters, or loopback mode.
+		 */
+	case AEN_IDC_REQ:
+		status = qlge_idc_req_aen(qdev);
+		break;
+
+		/* Process and inbound IDC event.
+		 * This will happen when we're trying to
+		 * change tx/rx max frame size, change pause
+		 * parameters or loopback mode.
+		 */
+	case AEN_IDC_CMPLT:
+	case AEN_IDC_EXT:
+		status = qlge_idc_cmplt_aen(qdev);
+		break;
+
+	case AEN_LINK_UP:
+		qlge_link_up(qdev, mbcp);
+		break;
+
+	case AEN_LINK_DOWN:
+		qlge_link_down(qdev, mbcp);
+		break;
+
+	case AEN_FW_INIT_DONE:
+		/* If we're in process on executing the firmware,
+		 * then convert the status to normal mailbox status.
+		 */
+		if (mbcp->mbox_in[0] == MB_CMD_EX_FW) {
+			mbcp->out_count = orig_count;
+			status = qlge_get_mb_sts(qdev, mbcp);
+			mbcp->mbox_out[0] = MB_CMD_STS_GOOD;
+			return status;
+		}
+		qlge_init_fw_done(qdev, mbcp);
+		break;
+
+	case AEN_AEN_SFP_IN:
+		qlge_sfp_in(qdev, mbcp);
+		break;
+
+	case AEN_AEN_SFP_OUT:
+		qlge_sfp_out(qdev, mbcp);
+		break;
+
+		/* This event can arrive at boot time or after an
+		 * MPI reset if the firmware failed to initialize.
+		 */
+	case AEN_FW_INIT_FAIL:
+		/* If we're in process on executing the firmware,
+		 * then convert the status to normal mailbox status.
+		 */
+		if (mbcp->mbox_in[0] == MB_CMD_EX_FW) {
+			mbcp->out_count = orig_count;
+			status = qlge_get_mb_sts(qdev, mbcp);
+			mbcp->mbox_out[0] = MB_CMD_STS_ERR;
+			return status;
+		}
+		netif_err(qdev, drv, qdev->ndev,
+			  "Firmware initialization failed.\n");
+		status = -EIO;
+		qlge_queue_fw_error(qdev);
+		break;
+
+	case AEN_SYS_ERR:
+		netif_err(qdev, drv, qdev->ndev, "System Error.\n");
+		qlge_queue_fw_error(qdev);
+		status = -EIO;
+		break;
+
+	case AEN_AEN_LOST:
+		qlge_aen_lost(qdev, mbcp);
+		break;
+
+	case AEN_DCBX_CHG:
+		/* Need to support AEN 8110 */
+		break;
+	default:
+		netif_err(qdev, drv, qdev->ndev,
+			  "Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
+		/* Clear the MPI firmware status. */
+	}
+end:
+	qlge_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
+	/* Restore the original mailbox count to
+	 * what the caller asked for.  This can get
+	 * changed when a mailbox command is waiting
+	 * for a response and an AEN arrives and
+	 * is handled.
+	 */
+	mbcp->out_count = orig_count;
+	return status;
+}
+
+/* Execute a single mailbox command.
+ * mbcp is a pointer to an array of u32.  Each
+ * element in the array contains the value for it's
+ * respective mailbox register.
+ */
+static int qlge_mailbox_command(struct qlge_adapter *qdev, struct mbox_params *mbcp)
+{
+	int status;
+	unsigned long count;
+
+	mutex_lock(&qdev->mpi_mutex);
+
+	/* Begin polled mode for MPI */
+	qlge_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
+
+	/* Load the mailbox registers and wake up MPI RISC. */
+	status = qlge_exec_mb_cmd(qdev, mbcp);
+	if (status)
+		goto end;
+
+	/* If we're generating a system error, then there's nothing
+	 * to wait for.
+	 */
+	if (mbcp->mbox_in[0] == MB_CMD_MAKE_SYS_ERR)
+		goto end;
+
+	/* Wait for the command to complete. We loop
+	 * here because some AEN might arrive while
+	 * we're waiting for the mailbox command to
+	 * complete. If more than 5 seconds expire we can
+	 * assume something is wrong.
+	 */
+	count = jiffies + HZ * MAILBOX_TIMEOUT;
+	do {
+		/* Wait for the interrupt to come in. */
+		status = qlge_wait_mbx_cmd_cmplt(qdev);
+		if (status)
+			continue;
+
+		/* Process the event.  If it's an AEN, it
+		 * will be handled in-line or a worker
+		 * will be spawned. If it's our completion
+		 * we will catch it below.
+		 */
+		status = qlge_mpi_handler(qdev, mbcp);
+		if (status)
+			goto end;
+
+		/* It's either the completion for our mailbox
+		 * command complete or an AEN.  If it's our
+		 * completion then get out.
+		 */
+		if (((mbcp->mbox_out[0] & 0x0000f000) ==
+		     MB_CMD_STS_GOOD) ||
+		    ((mbcp->mbox_out[0] & 0x0000f000) ==
+		     MB_CMD_STS_INTRMDT))
+			goto done;
+	} while (time_before(jiffies, count));
+
+	netif_err(qdev, drv, qdev->ndev,
+		  "Timed out waiting for mailbox complete.\n");
+	status = -ETIMEDOUT;
+	goto end;
+
+done:
+
+	/* Now we can clear the interrupt condition
+	 * and look at our status.
+	 */
+	qlge_write32(qdev, CSR, CSR_CMD_CLR_R2PCI_INT);
+
+	if (((mbcp->mbox_out[0] & 0x0000f000) !=
+	     MB_CMD_STS_GOOD) &&
+	    ((mbcp->mbox_out[0] & 0x0000f000) !=
+	     MB_CMD_STS_INTRMDT)) {
+		status = -EIO;
+	}
+end:
+	/* End polled mode for MPI */
+	qlge_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+	mutex_unlock(&qdev->mpi_mutex);
+	return status;
+}
+
+/* Get MPI firmware version. This will be used for
+ * driver banner and for ethtool info.
+ * Returns zero on success.
+ */
+int qlge_mb_about_fw(struct qlge_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status = 0;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 3;
+
+	mbcp->mbox_in[0] = MB_CMD_ABOUT_FW;
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed about firmware command\n");
+		status = -EIO;
+	}
+
+	/* Store the firmware version */
+	qdev->fw_rev_id = mbcp->mbox_out[1];
+
+	return status;
+}
+
+/* Get functional state for MPI firmware.
+ * Returns zero on success.
+ */
+int qlge_mb_get_fw_state(struct qlge_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status = 0;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 2;
+
+	mbcp->mbox_in[0] = MB_CMD_GET_FW_STATE;
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Get Firmware State.\n");
+		status = -EIO;
+	}
+
+	/* If bit zero is set in mbx 1 then the firmware is
+	 * running, but not initialized.  This should never
+	 * happen.
+	 */
+	if (mbcp->mbox_out[1] & 1) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Firmware waiting for initialization.\n");
+		status = -EIO;
+	}
+
+	return status;
+}
+
+/* Send and ACK mailbox command to the firmware to
+ * let it continue with the change.
+ */
+static int qlge_mb_idc_ack(struct qlge_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status = 0;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 5;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_IDC_ACK;
+	mbcp->mbox_in[1] = qdev->idc_mbc.mbox_out[1];
+	mbcp->mbox_in[2] = qdev->idc_mbc.mbox_out[2];
+	mbcp->mbox_in[3] = qdev->idc_mbc.mbox_out[3];
+	mbcp->mbox_in[4] = qdev->idc_mbc.mbox_out[4];
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev, "Failed IDC ACK send.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+/* Get link settings and maximum frame size settings
+ * for the current port.
+ * Most likely will block.
+ */
+int qlge_mb_set_port_cfg(struct qlge_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status = 0;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 3;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_PORT_CFG;
+	mbcp->mbox_in[1] = qdev->link_config;
+	mbcp->mbox_in[2] = qdev->max_frame_size;
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_INTRMDT) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Port Config sent, wait for IDC.\n");
+	} else	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Set Port Configuration.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+static int qlge_mb_dump_ram(struct qlge_adapter *qdev, u64 req_dma, u32 addr,
+			    u32 size)
+{
+	int status = 0;
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 9;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_DUMP_RISC_RAM;
+	mbcp->mbox_in[1] = LSW(addr);
+	mbcp->mbox_in[2] = MSW(req_dma);
+	mbcp->mbox_in[3] = LSW(req_dma);
+	mbcp->mbox_in[4] = MSW(size);
+	mbcp->mbox_in[5] = LSW(size);
+	mbcp->mbox_in[6] = MSW(MSD(req_dma));
+	mbcp->mbox_in[7] = LSW(MSD(req_dma));
+	mbcp->mbox_in[8] = MSW(addr);
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev, "Failed to dump risc RAM.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+/* Issue a mailbox command to dump RISC RAM. */
+int qlge_dump_risc_ram_area(struct qlge_adapter *qdev, void *buf,
+			    u32 ram_addr, int word_count)
+{
+	int status;
+	char *my_buf;
+	dma_addr_t buf_dma;
+
+	my_buf = dma_alloc_coherent(&qdev->pdev->dev,
+				    word_count * sizeof(u32), &buf_dma,
+				    GFP_ATOMIC);
+	if (!my_buf)
+		return -EIO;
+
+	status = qlge_mb_dump_ram(qdev, buf_dma, ram_addr, word_count);
+	if (!status)
+		memcpy(buf, my_buf, word_count * sizeof(u32));
+
+	dma_free_coherent(&qdev->pdev->dev, word_count * sizeof(u32), my_buf,
+			  buf_dma);
+	return status;
+}
+
+/* Get link settings and maximum frame size settings
+ * for the current port.
+ * Most likely will block.
+ */
+int qlge_mb_get_port_cfg(struct qlge_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status = 0;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 3;
+
+	mbcp->mbox_in[0] = MB_CMD_GET_PORT_CFG;
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed Get Port Configuration.\n");
+		status = -EIO;
+	} else	{
+		netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+			     "Passed Get Port Configuration.\n");
+		qdev->link_config = mbcp->mbox_out[1];
+		qdev->max_frame_size = mbcp->mbox_out[2];
+	}
+	return status;
+}
+
+int qlge_mb_wol_mode(struct qlge_adapter *qdev, u32 wol)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 2;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MODE;
+	mbcp->mbox_in[1] = wol;
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+int qlge_mb_wol_set_magic(struct qlge_adapter *qdev, u32 enable_wol)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+	const u8 *addr = qdev->ndev->dev_addr;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 8;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MAGIC;
+	if (enable_wol) {
+		mbcp->mbox_in[1] = (u32)addr[0];
+		mbcp->mbox_in[2] = (u32)addr[1];
+		mbcp->mbox_in[3] = (u32)addr[2];
+		mbcp->mbox_in[4] = (u32)addr[3];
+		mbcp->mbox_in[5] = (u32)addr[4];
+		mbcp->mbox_in[6] = (u32)addr[5];
+		mbcp->mbox_in[7] = 0;
+	} else {
+		mbcp->mbox_in[1] = 0;
+		mbcp->mbox_in[2] = 1;
+		mbcp->mbox_in[3] = 1;
+		mbcp->mbox_in[4] = 1;
+		mbcp->mbox_in[5] = 1;
+		mbcp->mbox_in[6] = 1;
+		mbcp->mbox_in[7] = 0;
+	}
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev, "Failed to set WOL mode.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+/* IDC - Inter Device Communication...
+ * Some firmware commands require consent of adjacent FCOE
+ * function.  This function waits for the OK, or a
+ * counter-request for a little more time.i
+ * The firmware will complete the request if the other
+ * function doesn't respond.
+ */
+static int qlge_idc_wait(struct qlge_adapter *qdev)
+{
+	int status = -ETIMEDOUT;
+	struct mbox_params *mbcp = &qdev->idc_mbc;
+	long wait_time;
+
+	for (wait_time = 1 * HZ; wait_time;) {
+		/* Wait here for the command to complete
+		 * via the IDC process.
+		 */
+		wait_time =
+			wait_for_completion_timeout(&qdev->ide_completion,
+						    wait_time);
+		if (!wait_time) {
+			netif_err(qdev, drv, qdev->ndev, "IDC Timeout.\n");
+			break;
+		}
+		/* Now examine the response from the IDC process.
+		 * We might have a good completion or a request for
+		 * more wait time.
+		 */
+		if (mbcp->mbox_out[0] == AEN_IDC_EXT) {
+			netif_err(qdev, drv, qdev->ndev,
+				  "IDC Time Extension from function.\n");
+			wait_time += (mbcp->mbox_out[1] >> 8) & 0x0000000f;
+		} else if (mbcp->mbox_out[0] == AEN_IDC_CMPLT) {
+			netif_err(qdev, drv, qdev->ndev, "IDC Success.\n");
+			status = 0;
+			break;
+		} else {
+			netif_err(qdev, drv, qdev->ndev,
+				  "IDC: Invalid State 0x%.04x.\n",
+				  mbcp->mbox_out[0]);
+			status = -EIO;
+			break;
+		}
+	}
+
+	return status;
+}
+
+int qlge_mb_set_led_cfg(struct qlge_adapter *qdev, u32 led_config)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 2;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_LED_CFG;
+	mbcp->mbox_in[1] = led_config;
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed to set LED Configuration.\n");
+		status = -EIO;
+	}
+
+	return status;
+}
+
+int qlge_mb_get_led_cfg(struct qlge_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 2;
+
+	mbcp->mbox_in[0] = MB_CMD_GET_LED_CFG;
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed to get LED Configuration.\n");
+		status = -EIO;
+	} else {
+		qdev->led_config = mbcp->mbox_out[1];
+	}
+	return status;
+}
+
+int qlge_mb_set_mgmnt_traffic_ctl(struct qlge_adapter *qdev, u32 control)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 2;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL;
+	mbcp->mbox_in[1] = control;
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Command not supported by firmware.\n");
+		status = -EINVAL;
+	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+		/* This indicates that the firmware is
+		 * already in the state we are trying to
+		 * change it to.
+		 */
+		netif_err(qdev, drv, qdev->ndev,
+			  "Command parameters make no change.\n");
+	}
+	return status;
+}
+
+/* Returns a negative error code or the mailbox command status. */
+static int qlge_mb_get_mgmnt_traffic_ctl(struct qlge_adapter *qdev, u32 *control)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+	*control = 0;
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL;
+
+	status = qlge_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) {
+		*control = mbcp->mbox_in[1];
+		return status;
+	}
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Command not supported by firmware.\n");
+		status = -EINVAL;
+	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Failed to get MPI traffic control.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+int qlge_wait_fifo_empty(struct qlge_adapter *qdev)
+{
+	int count;
+	u32 mgmnt_fifo_empty;
+	u32 nic_fifo_empty;
+
+	for (count = 6; count; count--) {
+		nic_fifo_empty = qlge_read32(qdev, STS) & STS_NFE;
+		qlge_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty);
+		mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY;
+		if (nic_fifo_empty && mgmnt_fifo_empty)
+			return 0;
+		msleep(100);
+	}
+	return -ETIMEDOUT;
+}
+
+/* API called in work thread context to set new TX/RX
+ * maximum frame size values to match MTU.
+ */
+static int qlge_set_port_cfg(struct qlge_adapter *qdev)
+{
+	int status;
+
+	status = qlge_mb_set_port_cfg(qdev);
+	if (status)
+		return status;
+	status = qlge_idc_wait(qdev);
+	return status;
+}
+
+/* The following routines are worker threads that process
+ * events that may sleep waiting for completion.
+ */
+
+/* This thread gets the maximum TX and RX frame size values
+ * from the firmware and, if necessary, changes them to match
+ * the MTU setting.
+ */
+void qlge_mpi_port_cfg_work(struct work_struct *work)
+{
+	struct qlge_adapter *qdev =
+		container_of(work, struct qlge_adapter, mpi_port_cfg_work.work);
+	int status;
+
+	status = qlge_mb_get_port_cfg(qdev);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Bug: Failed to get port config data.\n");
+		goto err;
+	}
+
+	if (qdev->link_config & CFG_JUMBO_FRAME_SIZE &&
+	    qdev->max_frame_size == CFG_DEFAULT_MAX_FRAME_SIZE)
+		goto end;
+
+	qdev->link_config |=	CFG_JUMBO_FRAME_SIZE;
+	qdev->max_frame_size = CFG_DEFAULT_MAX_FRAME_SIZE;
+	status = qlge_set_port_cfg(qdev);
+	if (status) {
+		netif_err(qdev, drv, qdev->ndev,
+			  "Bug: Failed to set port config data.\n");
+		goto err;
+	}
+end:
+	clear_bit(QL_PORT_CFG, &qdev->flags);
+	return;
+err:
+	qlge_queue_fw_error(qdev);
+	goto end;
+}
+
+/* Process an inter-device request.  This is issues by
+ * the firmware in response to another function requesting
+ * a change to the port. We set a flag to indicate a change
+ * has been made and then send a mailbox command ACKing
+ * the change request.
+ */
+void qlge_mpi_idc_work(struct work_struct *work)
+{
+	struct qlge_adapter *qdev =
+		container_of(work, struct qlge_adapter, mpi_idc_work.work);
+	int status;
+	struct mbox_params *mbcp = &qdev->idc_mbc;
+	u32 aen;
+	int timeout;
+
+	aen = mbcp->mbox_out[1] >> 16;
+	timeout = (mbcp->mbox_out[1] >> 8) & 0xf;
+
+	switch (aen) {
+	default:
+		netif_err(qdev, drv, qdev->ndev,
+			  "Bug: Unhandled IDC action.\n");
+		break;
+	case MB_CMD_PORT_RESET:
+	case MB_CMD_STOP_FW:
+		qlge_link_off(qdev);
+		fallthrough;
+	case MB_CMD_SET_PORT_CFG:
+		/* Signal the resulting link up AEN
+		 * that the frame routing and mac addr
+		 * needs to be set.
+		 */
+		set_bit(QL_CAM_RT_SET, &qdev->flags);
+		/* Do ACK if required */
+		if (timeout) {
+			status = qlge_mb_idc_ack(qdev);
+			if (status)
+				netif_err(qdev, drv, qdev->ndev,
+					  "Bug: No pending IDC!\n");
+		} else {
+			netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+				     "IDC ACK not required\n");
+			status = 0; /* success */
+		}
+		break;
+
+		/* These sub-commands issued by another (FCoE)
+		 * function are requesting to do an operation
+		 * on the shared resource (MPI environment).
+		 * We currently don't issue these so we just
+		 * ACK the request.
+		 */
+	case MB_CMD_IOP_RESTART_MPI:
+	case MB_CMD_IOP_PREP_LINK_DOWN:
+		/* Drop the link, reload the routing
+		 * table when link comes up.
+		 */
+		qlge_link_off(qdev);
+		set_bit(QL_CAM_RT_SET, &qdev->flags);
+		fallthrough;
+	case MB_CMD_IOP_DVR_START:
+	case MB_CMD_IOP_FLASH_ACC:
+	case MB_CMD_IOP_CORE_DUMP_MPI:
+	case MB_CMD_IOP_PREP_UPDATE_MPI:
+	case MB_CMD_IOP_COMP_UPDATE_MPI:
+	case MB_CMD_IOP_NONE:	/*  an IDC without params */
+		/* Do ACK if required */
+		if (timeout) {
+			status = qlge_mb_idc_ack(qdev);
+			if (status)
+				netif_err(qdev, drv, qdev->ndev,
+					  "Bug: No pending IDC!\n");
+		} else {
+			netif_printk(qdev, drv, KERN_DEBUG, qdev->ndev,
+				     "IDC ACK not required\n");
+			status = 0; /* success */
+		}
+		break;
+	}
+}
+
+void qlge_mpi_work(struct work_struct *work)
+{
+	struct qlge_adapter *qdev =
+		container_of(work, struct qlge_adapter, mpi_work.work);
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int err = 0;
+
+	mutex_lock(&qdev->mpi_mutex);
+	/* Begin polled mode for MPI */
+	qlge_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
+
+	while (qlge_read32(qdev, STS) & STS_PI) {
+		memset(mbcp, 0, sizeof(struct mbox_params));
+		mbcp->out_count = 1;
+		/* Don't continue if an async event
+		 * did not complete properly.
+		 */
+		err = qlge_mpi_handler(qdev, mbcp);
+		if (err)
+			break;
+	}
+
+	/* End polled mode for MPI */
+	qlge_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+	mutex_unlock(&qdev->mpi_mutex);
+}
+
+void qlge_mpi_reset_work(struct work_struct *work)
+{
+	struct qlge_adapter *qdev =
+		container_of(work, struct qlge_adapter, mpi_reset_work.work);
+	cancel_delayed_work_sync(&qdev->mpi_work);
+	cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
+	cancel_delayed_work_sync(&qdev->mpi_idc_work);
+	/* If we're not the dominant NIC function,
+	 * then there is nothing to do.
+	 */
+	if (!qlge_own_firmware(qdev)) {
+		netif_err(qdev, drv, qdev->ndev, "Don't own firmware!\n");
+		return;
+	}
+
+	qlge_soft_reset_mpi_risc(qdev);
+}