| Message ID | 20231122155117.2816724-3-ioana.ciornei@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | dpaa2-eth: various fixes | expand |
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c index f2676fd50e1f..774377db0b4b 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c @@ -4965,6 +4965,8 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) if (err) goto err_dl_port_add; + net_dev->needed_headroom = DPAA2_ETH_SWA_SIZE + DPAA2_ETH_TX_BUF_ALIGN; + err = register_netdev(net_dev); if (err < 0) { dev_err(dev, "register_netdev() failed\n");
Set the needed_headroom net device field to the usual value that the driver would need on the Tx path: - 64 bytes for the software annotation area - 64 bytes to account for a 64 byte aligned buffer address In the circumstances in which the needed Tx HW annotation would increase the needed headroom, for example timestamping, the driver is already capable to send a S/G frame with a single data buffer which circumvents the limited skb headroom. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> --- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 ++ 1 file changed, 2 insertions(+)