@@ -23,3 +23,7 @@ The ``octeontx2`` driver implements the following driver-specific parameters.
- u16
- runtime
- Configures maximum icb entries that HW can use in RX path.
+ * - ``t106_mode``
+ - u8
+ - runtime
+ - Used to configure CN10KA B0/CN10KB CPT to work as CN10KA A0/A1.
@@ -200,6 +200,14 @@ static inline bool cpt_feature_rxc_icb_cnt(struct pci_dev *pdev)
return false;
}
+static inline bool cpt_feature_sgv2(struct pci_dev *pdev)
+{
+ if (!is_dev_otx2(pdev) && !is_dev_cn10ka_ax(pdev))
+ return true;
+
+ return false;
+}
+
int otx2_cpt_send_ready_msg(struct otx2_mbox *mbox, struct pci_dev *pdev);
int otx2_cpt_send_mbox_msg(struct otx2_mbox *mbox, struct pci_dev *pdev);
@@ -24,10 +24,7 @@ static int otx2_cpt_dl_egrp_delete(struct devlink *dl, u32 id,
static int otx2_cpt_dl_uc_info(struct devlink *dl, u32 id,
struct devlink_param_gset_ctx *ctx)
{
- struct otx2_cpt_devlink *cpt_dl = devlink_priv(dl);
- struct otx2_cptpf_dev *cptpf = cpt_dl->cptpf;
-
- otx2_cpt_print_uc_dbg_info(cptpf);
+ ctx->val.vstr[0] = '\0';
return 0;
}
@@ -70,11 +67,50 @@ static int otx2_cpt_dl_max_rxc_icb_cnt_set(struct devlink *dl, u32 id,
return 0;
}
+static int otx2_cpt_dl_t106_mode_get(struct devlink *dl, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ struct otx2_cpt_devlink *cpt_dl = devlink_priv(dl);
+ struct otx2_cptpf_dev *cptpf = cpt_dl->cptpf;
+ struct pci_dev *pdev = cptpf->pdev;
+ u64 reg_val = 0;
+
+ otx2_cpt_read_af_reg(&cptpf->afpf_mbox, pdev, CPT_AF_CTL, ®_val,
+ BLKADDR_CPT0);
+ ctx->val.vu8 = (reg_val >> 18) & 0x1;
+
+ return 0;
+}
+
+static int otx2_cpt_dl_t106_mode_set(struct devlink *dl, u32 id,
+ struct devlink_param_gset_ctx *ctx)
+{
+ struct otx2_cpt_devlink *cpt_dl = devlink_priv(dl);
+ struct otx2_cptpf_dev *cptpf = cpt_dl->cptpf;
+ struct pci_dev *pdev = cptpf->pdev;
+ u64 reg_val = 0;
+
+ if (cptpf->enabled_vfs != 0 || cptpf->eng_grps.is_grps_created)
+ return -EPERM;
+
+ if (cpt_feature_sgv2(pdev)) {
+ otx2_cpt_read_af_reg(&cptpf->afpf_mbox, pdev, CPT_AF_CTL,
+ ®_val, BLKADDR_CPT0);
+ reg_val &= ~(0x1ULL << 18);
+ reg_val |= ((u64)ctx->val.vu8 & 0x1) << 18;
+ return otx2_cpt_write_af_reg(&cptpf->afpf_mbox, pdev,
+ CPT_AF_CTL, reg_val, BLKADDR_CPT0);
+ }
+
+ return 0;
+}
+
enum otx2_cpt_dl_param_id {
OTX2_CPT_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
OTX2_CPT_DEVLINK_PARAM_ID_EGRP_CREATE,
OTX2_CPT_DEVLINK_PARAM_ID_EGRP_DELETE,
OTX2_CPT_DEVLINK_PARAM_ID_MAX_RXC_ICB_CNT,
+ OTX2_CPT_DEVLINK_PARAM_ID_T106_MODE,
};
static const struct devlink_param otx2_cpt_dl_params[] = {
@@ -94,6 +130,11 @@ static const struct devlink_param otx2_cpt_dl_params[] = {
otx2_cpt_dl_max_rxc_icb_cnt,
otx2_cpt_dl_max_rxc_icb_cnt_set,
NULL),
+ DEVLINK_PARAM_DRIVER(OTX2_CPT_DEVLINK_PARAM_ID_T106_MODE,
+ "t106_mode", DEVLINK_PARAM_TYPE_U8,
+ BIT(DEVLINK_PARAM_CMODE_RUNTIME),
+ otx2_cpt_dl_t106_mode_get, otx2_cpt_dl_t106_mode_set,
+ NULL),
};
static int otx2_cpt_dl_info_firmware_version_put(struct devlink_info_req *req,
@@ -165,7 +206,6 @@ int otx2_cpt_register_dl(struct otx2_cptpf_dev *cptpf)
devlink_free(dl);
return ret;
}
-
devlink_register(dl);
return 0;
@@ -600,10 +600,10 @@ static int cptpf_get_rid(struct pci_dev *pdev, struct otx2_cptpf_dev *cptpf)
}
otx2_cpt_read_af_reg(&cptpf->afpf_mbox, pdev, CPT_AF_CTL, ®_val,
BLKADDR_CPT0);
- if ((is_dev_cn10ka_b0(pdev) && (reg_val & BIT_ULL(18))) ||
+ if ((cpt_feature_sgv2(pdev) && (reg_val & BIT_ULL(18))) ||
is_dev_cn10ka_ax(pdev))
eng_grps->rid = CPT_UC_RID_CN10K_A;
- else if (is_dev_cn10kb(pdev) || is_dev_cn10ka_b0(pdev))
+ else if (cpt_feature_sgv2(pdev))
eng_grps->rid = CPT_UC_RID_CN10K_B;
return 0;
On CN10KA B0/CN10KB, CPT scatter gather format has modified to support multi-seg in inline IPsec. Due to this CPT requires new firmware and doesn't work with CN10KA0/A1 firmware. To make HW works in backward compatibility mode or works with CN10KA0/A1 firmware, a bit(T106_MODE) is introduced in HW CSR. This patch adds devlink parameter for configuring T106_MODE. Signed-off-by: Srujana Challa <schalla@marvell.com> --- .../crypto/device_drivers/octeontx2.rst | 4 ++ .../marvell/octeontx2/otx2_cpt_common.h | 8 +++ .../marvell/octeontx2/otx2_cpt_devlink.c | 50 +++++++++++++++++-- .../marvell/octeontx2/otx2_cptpf_main.c | 4 +- 4 files changed, 59 insertions(+), 7 deletions(-)