@@ -296,62 +296,80 @@ static int stmmac_mtl_setup(struct platform_device *pdev,
}
/**
- * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
- * @plat: driver data platform structure
- * @np: device tree node
- * @dev: device pointer
- * Description:
- * The mdio bus will be allocated in case of a phy transceiver is on board;
- * it will be NULL if the fixed-link is configured.
- * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated
- * in any case (for DSA, mdio must be registered even if fixed-link).
- * The table below sums the supported configurations:
- * -------------------------------
- * snps,phy-addr | Y
- * -------------------------------
- * phy-handle | Y
- * -------------------------------
- * fixed-link | N
- * -------------------------------
- * snps,dwmac-mdio |
- * even if | Y
- * fixed-link |
- * -------------------------------
+ * stmmac_of_get_mdio() - Gets the MDIO bus from the devicetree.
+ * @np: devicetree node
*
- * It returns 0 in case of success otherwise -ENODEV.
+ * The MDIO bus will be searched for in the following ways:
+ * 1. The compatible is "snps,dwc-qos-ethernet-4.10" && a "mdio" named
+ * child node exists
+ * 2. A child node with the "snps,dwmac-mdio" compatible is present
+ *
+ * Return: The MDIO node if present otherwise NULL
*/
-static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
- struct device_node *np, struct device *dev)
+static struct device_node *stmmac_of_get_mdio(struct device_node *np)
{
- bool mdio = !of_phy_is_fixed_link(np);
static const struct of_device_id need_mdio_ids[] = {
{ .compatible = "snps,dwc-qos-ethernet-4.10" },
{},
};
+ struct device_node *mdio_node = NULL;
if (of_match_node(need_mdio_ids, np)) {
- plat->mdio_node = of_get_child_by_name(np, "mdio");
+ mdio_node = of_get_child_by_name(np, "mdio");
} else {
/**
* If snps,dwmac-mdio is passed from DT, always register
* the MDIO
*/
- for_each_child_of_node(np, plat->mdio_node) {
- if (of_device_is_compatible(plat->mdio_node,
+ for_each_child_of_node(np, mdio_node) {
+ if (of_device_is_compatible(mdio_node,
"snps,dwmac-mdio"))
break;
}
}
- if (plat->mdio_node) {
+ return mdio_node;
+}
+
+/**
+ * stmmac_mdio_setup() - Populate platform related MDIO structures.
+ * @plat: driver data platform structure
+ * @np: devicetree node
+ * @dev: device pointer
+ *
+ * This searches for MDIO information from the devicetree.
+ * If an MDIO node is found, it's assigned to plat->mdio_node and
+ * plat->mdio_bus_data is allocated.
+ * If no connection can be determined, just plat->mdio_bus_data is allocated
+ * to indicate a bus should be created and scanned for a phy.
+ * If it's determined there's no MDIO bus needed, both are left NULL.
+ *
+ * This expects that plat->phy_node has already been searched for.
+ *
+ * Return: 0 on success, errno otherwise.
+ */
+static int stmmac_mdio_setup(struct plat_stmmacenet_data *plat,
+ struct device_node *np, struct device *dev)
+{
+ bool legacy_mdio;
+
+ plat->mdio_node = stmmac_of_get_mdio(np);
+ if (plat->mdio_node)
dev_dbg(dev, "Found MDIO subnode\n");
- mdio = true;
- }
- if (mdio) {
- plat->mdio_bus_data =
- devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data),
- GFP_KERNEL);
+ /* Legacy devicetrees allowed for no MDIO bus description and expect
+ * the bus to be scanned for devices. If there's no phy or fixed-link
+ * described assume this is the case since there must be something
+ * connected to the MAC.
+ */
+ legacy_mdio = !of_phy_is_fixed_link(np) && !plat->phy_node;
+ if (legacy_mdio)
+ dev_info(dev, "Deprecated MDIO bus assumption used\n");
+
+ if (plat->mdio_node || legacy_mdio) {
+ plat->mdio_bus_data = devm_kzalloc(dev,
+ sizeof(*plat->mdio_bus_data),
+ GFP_KERNEL);
if (!plat->mdio_bus_data)
return -ENOMEM;
@@ -471,8 +489,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
- /* To Configure PHY by using all device-tree supported properties */
- rc = stmmac_dt_phy(plat, np, &pdev->dev);
+ rc = stmmac_mdio_setup(plat, np, &pdev->dev);
if (rc)
return ERR_PTR(rc);
Currently a MDIO bus is created if the devicetree description is either: 1. Not fixed-link 2. fixed-link but contains a MDIO bus as well The "1" case above isn't always accurate. If there's a phy-handle, it could be referencing a phy on another MDIO controller's bus[1]. In this case, where the MDIO bus is not described at all, currently stmmac will make a MDIO bus and scan its address space to discover phys (of which there are none). This process takes time scanning a bus that is known to be empty, delaying time to complete probe. There are also a lot of upstream devicetrees[2] that expect a MDIO bus to be created, scanned for phys, and the first one found connected to the MAC. This case can be inferred from the platform description by not having a phy-handle && not being fixed-link. This hits case "1" in the current driver's logic, and must be handled in any logic change here since it is a valid legacy dt-binding. Let's improve the logic to create a MDIO bus if either: - Devicetree contains a MDIO bus - !fixed-link && !phy-handle (legacy handling) This way the case where no MDIO bus should be made is handled, as well as retaining backwards compatibility with the valid cases. Below devicetree snippets can be found that explain some of the cases above more concretely. Here's[0] a devicetree example where the MAC is both fixed-link and driving a switch on MDIO (case "2" above). This needs a MDIO bus to be created: &fec1 { phy-mode = "rmii"; fixed-link { speed = <100>; full-duplex; }; mdio1: mdio { switch0: switch0@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; }; }; }; Here's[1] an example where there is no MDIO bus or fixed-link for the ethernet1 MAC, so no MDIO bus should be created since ethernet0 is the MDIO master for ethernet1's phy: ðernet0 { phy-mode = "sgmii"; phy-handle = <&sgmii_phy0>; mdio { compatible = "snps,dwmac-mdio"; sgmii_phy0: phy@8 { compatible = "ethernet-phy-id0141.0dd4"; reg = <0x8>; device_type = "ethernet-phy"; }; sgmii_phy1: phy@a { compatible = "ethernet-phy-id0141.0dd4"; reg = <0xa>; device_type = "ethernet-phy"; }; }; }; ðernet1 { phy-mode = "sgmii"; phy-handle = <&sgmii_phy1>; }; Finally there's descriptions like this[2] which don't describe the MDIO bus but expect it to be created and the whole address space scanned for a phy since there's no phy-handle or fixed-link described: &gmac { phy-supply = <&vcc_lan>; phy-mode = "rmii"; snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; }; [0] https://elixir.bootlin.com/linux/v6.5-rc5/source/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts [1] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/qcom/sa8775p-ride.dts [2] https://elixir.bootlin.com/linux/v6.6-rc5/source/arch/arm64/boot/dts/rockchip/rk3368-r88.dts#L164 Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> --- Changes in v4: - Add a line about why it is advantageous to avoid creating the unused bus (Andrew Lunn) - Use sizeof(var) instead of sizeof(struct ...) (Serge) - Describe sa8775p MDIO controller in SoC dtsi (Andrew Lunn) - New patch to handle disabled MDIO bus in stmmac Changes in v3: - Keep logic out of stmmac_probe_config_dt() since it's already massive (Serge) Changes in v2: - Handle the fixed-link + mdio case (Andrew Lunn) - Reworded commit message - Still handle the "legacy" case mentioned in the commit - Bit further refactoring of the function for readability - Link to v3: https://lore.kernel.org/r/20231207-stmmac-no-mdio-node-v3-1-34b870f2bafb@redhat.com - Link to v2: https://lore.kernel.org/r/20231206-stmmac-no-mdio-node-v2-1-333cae49b1ca@redhat.com - Link to v1: https://lore.kernel.org/netdev/20230808120254.11653-1-brgl@bgdev.pl/ --- .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 91 +++++++++++++--------- 1 file changed, 54 insertions(+), 37 deletions(-) --- base-commit: e9e952f599f2af1b11c9c5a032d8639ec4c6e4ef change-id: 20231127-stmmac-no-mdio-node-1db9da8a25d9 Best regards,