From patchwork Thu Dec 14 02:54:52 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jiawen Wu X-Patchwork-Id: 13492242 X-Patchwork-Delegate: kuba@kernel.org X-Greylist: delayed 154226 seconds by postgrey-1.37 at lindbergh.monkeyblade.net; Wed, 13 Dec 2023 19:01:37 PST Received: from smtpbgeu2.qq.com (smtpbgeu2.qq.com [18.194.254.142]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 72B61F4 for ; Wed, 13 Dec 2023 19:01:36 -0800 (PST) X-QQ-mid: bizesmtp68t1702522807tzl5idoz Received: from wxdbg.localdomain.com ( [183.129.236.74]) by bizesmtp.qq.com (ESMTP) with id ; Thu, 14 Dec 2023 11:00:06 +0800 (CST) X-QQ-SSF: 01400000000000L0Z000000A0000000 X-QQ-FEAT: OtIeQkg1QQElLkk5gDTlEKnGmXT2YwxY7DOAyA58ANkZYJSlIWUlcg81M9zO7 W3B6LL7eE9A58arbfJfcfJIYFQY956PmhKKzo61GMGmtunIg6ugida03HwC8N2unF34+o2z 0Y8yAR7KOz0wRhLNPlX2yDCewcX/PyOxU7qFRNemJYxJYHFQeqU9ve77Jx+9IPRB/EKOOBg W4xZYAw58W/BQjz5QHPcFjWF0n0DZWdKAIcw1q1+EzgyP6H0pdw45JoqpoQZjnqmI0frJWt NpcSf4m/p/4LTCpWWYEjklIFJvAMxWISeWnb9EqC73FbJEsllzpnymqTd2fk76b36M3UtzB KA2VowUn1jvf+emdv7nPHaylv9pB6YJVaONdXCqu7jkIv6xtCQLSA2W2IKYbjfYcd99BS74 yr/hVzXJShc= X-QQ-GoodBg: 2 X-BIZMAIL-ID: 4392918771309353225 From: Jiawen Wu To: davem@davemloft.net, edumazet@google.com, kuba@kernel.org, pabeni@redhat.com, linux@armlinux.org.uk, andrew@lunn.ch, netdev@vger.kernel.org Cc: mengyuanlou@net-swift.com, Jiawen Wu Subject: [PATCH net-next v5 4/8] net: wangxun: add flow control support Date: Thu, 14 Dec 2023 10:54:52 +0800 Message-Id: <20231214025456.1387175-5-jiawenwu@trustnetic.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20231214025456.1387175-1-jiawenwu@trustnetic.com> References: <20231214025456.1387175-1-jiawenwu@trustnetic.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-QQ-SENDSIZE: 520 Feedback-ID: bizesmtp:trustnetic.com:qybglogicsvrgz:qybglogicsvrgz5a-1 X-Patchwork-Delegate: kuba@kernel.org Add support to set pause params with ethtool -A and get pause params with ethtool -a, for ethernet driver txgbe and ngbe. Signed-off-by: Jiawen Wu --- .../net/ethernet/wangxun/libwx/wx_ethtool.c | 18 ++ .../net/ethernet/wangxun/libwx/wx_ethtool.h | 4 + drivers/net/ethernet/wangxun/libwx/wx_hw.c | 172 ++++++++++++++++++ drivers/net/ethernet/wangxun/libwx/wx_hw.h | 1 + drivers/net/ethernet/wangxun/libwx/wx_type.h | 48 +++++ .../net/ethernet/wangxun/ngbe/ngbe_ethtool.c | 2 + drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c | 2 + .../ethernet/wangxun/txgbe/txgbe_ethtool.c | 2 + .../net/ethernet/wangxun/txgbe/txgbe_phy.c | 2 + 9 files changed, 251 insertions(+) diff --git a/drivers/net/ethernet/wangxun/libwx/wx_ethtool.c b/drivers/net/ethernet/wangxun/libwx/wx_ethtool.c index 12feb8a5ee75..e4d2bbf7dad6 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_ethtool.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_ethtool.c @@ -211,3 +211,21 @@ int wx_set_link_ksettings(struct net_device *netdev, return phylink_ethtool_ksettings_set(wx->phylink, cmd); } EXPORT_SYMBOL(wx_set_link_ksettings); + +void wx_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct wx *wx = netdev_priv(netdev); + + phylink_ethtool_get_pauseparam(wx->phylink, pause); +} +EXPORT_SYMBOL(wx_get_pauseparam); + +int wx_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct wx *wx = netdev_priv(netdev); + + return phylink_ethtool_set_pauseparam(wx->phylink, pause); +} +EXPORT_SYMBOL(wx_set_pauseparam); diff --git a/drivers/net/ethernet/wangxun/libwx/wx_ethtool.h b/drivers/net/ethernet/wangxun/libwx/wx_ethtool.h index f15cc445ae0f..7d3d85f212eb 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_ethtool.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_ethtool.h @@ -18,4 +18,8 @@ int wx_get_link_ksettings(struct net_device *netdev, struct ethtool_link_ksettings *cmd); int wx_set_link_ksettings(struct net_device *netdev, const struct ethtool_link_ksettings *cmd); +void wx_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause); +int wx_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause); #endif /* _WX_ETHTOOL_H_ */ diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index 533e912af089..d11f7d8db194 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -1158,6 +1158,81 @@ static void wx_set_rxpba(struct wx *wx) wr32(wx, WX_TDM_PB_THRE(0), txpbthresh); } +#define WX_ETH_FRAMING 20 + +/** + * wx_hpbthresh - calculate high water mark for flow control + * + * @wx: board private structure to calculate for + **/ +static int wx_hpbthresh(struct wx *wx) +{ + struct net_device *dev = wx->netdev; + int link, tc, kb, marker; + u32 dv_id, rx_pba; + + /* Calculate max LAN frame size */ + link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + WX_ETH_FRAMING; + tc = link; + + /* Calculate delay value for device */ + dv_id = WX_DV(link, tc); + + /* Delay value is calculated in bit times convert to KB */ + kb = WX_BT2KB(dv_id); + rx_pba = rd32(wx, WX_RDB_PB_SZ(0)) >> WX_RDB_PB_SZ_SHIFT; + + marker = rx_pba - kb; + + /* It is possible that the packet buffer is not large enough + * to provide required headroom. In this case throw an error + * to user and a do the best we can. + */ + if (marker < 0) { + dev_warn(&wx->pdev->dev, + "Packet Buffer can not provide enough headroom to support flow control. Decrease MTU or number of traffic classes\n"); + marker = tc + 1; + } + + return marker; +} + +/** + * wx_lpbthresh - calculate low water mark for flow control + * + * @wx: board private structure to calculate for + **/ +static int wx_lpbthresh(struct wx *wx) +{ + struct net_device *dev = wx->netdev; + u32 dv_id; + int tc; + + /* Calculate max LAN frame size */ + tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN; + + /* Calculate delay value for device */ + dv_id = WX_LOW_DV(tc); + + /* Delay value is calculated in bit times convert to KB */ + return WX_BT2KB(dv_id); +} + +/** + * wx_pbthresh_setup - calculate and setup high low water marks + * + * @wx: board private structure to calculate for + **/ +static void wx_pbthresh_setup(struct wx *wx) +{ + wx->fc.high_water = wx_hpbthresh(wx); + wx->fc.low_water = wx_lpbthresh(wx); + + /* Low water marks must not be larger than high water marks */ + if (wx->fc.low_water > wx->fc.high_water) + wx->fc.low_water = 0; +} + static void wx_configure_port(struct wx *wx) { u32 value, i; @@ -1584,6 +1659,7 @@ static void wx_configure_isb(struct wx *wx) void wx_configure(struct wx *wx) { wx_set_rxpba(wx); + wx_pbthresh_setup(wx); wx_configure_port(wx); wx_set_rx_mode(wx->netdev); @@ -2003,6 +2079,102 @@ int wx_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) } EXPORT_SYMBOL(wx_vlan_rx_kill_vid); +static void wx_enable_rx_drop(struct wx *wx, struct wx_ring *ring) +{ + u16 reg_idx = ring->reg_idx; + u32 srrctl; + + srrctl = rd32(wx, WX_PX_RR_CFG(reg_idx)); + srrctl |= WX_PX_RR_CFG_DROP_EN; + + wr32(wx, WX_PX_RR_CFG(reg_idx), srrctl); +} + +static void wx_disable_rx_drop(struct wx *wx, struct wx_ring *ring) +{ + u16 reg_idx = ring->reg_idx; + u32 srrctl; + + srrctl = rd32(wx, WX_PX_RR_CFG(reg_idx)); + srrctl &= ~WX_PX_RR_CFG_DROP_EN; + + wr32(wx, WX_PX_RR_CFG(reg_idx), srrctl); +} + +int wx_fc_enable(struct wx *wx, bool tx_pause, bool rx_pause) +{ + u16 pause_time = WX_DEFAULT_FCPAUSE; + u32 mflcn_reg, fccfg_reg, reg; + u32 fcrtl, fcrth; + int i; + + /* Low water mark of zero causes XOFF floods */ + if (tx_pause && wx->fc.high_water) { + if (!wx->fc.low_water || wx->fc.low_water >= wx->fc.high_water) { + wx_err(wx, "Invalid water mark configuration\n"); + return -EINVAL; + } + } + + /* Disable any previous flow control settings */ + mflcn_reg = rd32(wx, WX_MAC_RX_FLOW_CTRL); + mflcn_reg &= ~WX_MAC_RX_FLOW_CTRL_RFE; + + fccfg_reg = rd32(wx, WX_RDB_RFCC); + fccfg_reg &= ~WX_RDB_RFCC_RFCE_802_3X; + + if (rx_pause) + mflcn_reg |= WX_MAC_RX_FLOW_CTRL_RFE; + if (tx_pause) + fccfg_reg |= WX_RDB_RFCC_RFCE_802_3X; + + /* Set 802.3x based flow control settings. */ + wr32(wx, WX_MAC_RX_FLOW_CTRL, mflcn_reg); + wr32(wx, WX_RDB_RFCC, fccfg_reg); + + /* Set up and enable Rx high/low water mark thresholds, enable XON. */ + if (tx_pause && wx->fc.high_water) { + fcrtl = (wx->fc.low_water << 10) | WX_RDB_RFCL_XONE; + wr32(wx, WX_RDB_RFCL, fcrtl); + fcrth = (wx->fc.high_water << 10) | WX_RDB_RFCH_XOFFE; + } else { + wr32(wx, WX_RDB_RFCL, 0); + /* In order to prevent Tx hangs when the internal Tx + * switch is enabled we must set the high water mark + * to the Rx packet buffer size - 24KB. This allows + * the Tx switch to function even under heavy Rx + * workloads. + */ + fcrth = rd32(wx, WX_RDB_PB_SZ(0)) - 24576; + } + + wr32(wx, WX_RDB_RFCH, fcrth); + + /* Configure pause time */ + reg = pause_time * 0x00010001; + wr32(wx, WX_RDB_RFCV, reg); + + /* Configure flow control refresh threshold value */ + wr32(wx, WX_RDB_RFCRT, pause_time / 2); + + /* We should set the drop enable bit if: + * Number of Rx queues > 1 and flow control is disabled + * + * This allows us to avoid head of line blocking for security + * and performance reasons. + */ + if (wx->num_rx_queues > 1 && !tx_pause) { + for (i = 0; i < wx->num_rx_queues; i++) + wx_enable_rx_drop(wx, wx->rx_ring[i]); + } else { + for (i = 0; i < wx->num_rx_queues; i++) + wx_disable_rx_drop(wx, wx->rx_ring[i]); + } + + return 0; +} +EXPORT_SYMBOL(wx_fc_enable); + /** * wx_update_stats - Update the board statistics counters. * @wx: board private structure diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.h b/drivers/net/ethernet/wangxun/libwx/wx_hw.h index 12c20a7c364d..9e219fa717a2 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.h @@ -41,6 +41,7 @@ int wx_get_pcie_msix_counts(struct wx *wx, u16 *msix_count, u16 max_msix_count); int wx_sw_init(struct wx *wx); int wx_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid); int wx_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid); +int wx_fc_enable(struct wx *wx, bool tx_pause, bool rx_pause); void wx_update_stats(struct wx *wx); void wx_clear_hw_cntrs(struct wx *wx); diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h index c0dd9fc6df66..09befcda0cf0 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_type.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h @@ -131,6 +131,15 @@ #define WX_RDB_PFCMACDAH 0x19214 #define WX_RDB_LXOFFTXC 0x19218 #define WX_RDB_LXONTXC 0x1921C +/* Flow Control Registers */ +#define WX_RDB_RFCV 0x19200 +#define WX_RDB_RFCL 0x19220 +#define WX_RDB_RFCL_XONE BIT(31) +#define WX_RDB_RFCH 0x19260 +#define WX_RDB_RFCH_XOFFE BIT(31) +#define WX_RDB_RFCRT 0x192A0 +#define WX_RDB_RFCC 0x192A4 +#define WX_RDB_RFCC_RFCE_802_3X BIT(3) /* ring assignment */ #define WX_RDB_PL_CFG(_i) (0x19300 + ((_i) * 4)) #define WX_RDB_PL_CFG_L4HDR BIT(1) @@ -331,6 +340,7 @@ enum WX_MSCA_CMD_value { #define WX_PX_MPRC(_i) (0x01020 + ((_i) * 0x40)) /* PX_RR_CFG bit definitions */ #define WX_PX_RR_CFG_VLAN BIT(31) +#define WX_PX_RR_CFG_DROP_EN BIT(30) #define WX_PX_RR_CFG_SPLIT_MODE BIT(26) #define WX_PX_RR_CFG_RR_THER_SHIFT 16 #define WX_PX_RR_CFG_RR_HDR_SZ GENMASK(15, 12) @@ -368,6 +378,38 @@ enum WX_MSCA_CMD_value { #define WX_MAC_STATE_MODIFIED 0x2 #define WX_MAC_STATE_IN_USE 0x4 +/* BitTimes (BT) conversion */ +#define WX_BT2KB(BT) (((BT) + (8 * 1024 - 1)) / (8 * 1024)) +#define WX_B2BT(BT) ((BT) * 8) + +/* Calculate Delay to respond to PFC */ +#define WX_PFC_D 672 +/* Calculate Cable Delay */ +#define WX_CABLE_DC 5556 /* Delay Copper */ +/* Calculate Delay incurred from higher layer */ +#define WX_HD 6144 + +/* Calculate Interface Delay */ +#define WX_PHY_D 12800 +#define WX_MAC_D 4096 +#define WX_XAUI_D (2 * 1024) +#define WX_ID (WX_MAC_D + WX_XAUI_D + WX_PHY_D) +/* Calculate PCI Bus delay for low thresholds */ +#define WX_PCI_DELAY 10000 + +/* Calculate delay value in bit times */ +#define WX_DV(_max_frame_link, _max_frame_tc) \ + ((36 * (WX_B2BT(_max_frame_link) + WX_PFC_D + \ + (2 * WX_CABLE_DC) + (2 * WX_ID) + WX_HD) / 25 + 1) + \ + 2 * WX_B2BT(_max_frame_tc)) + +/* Calculate low threshold delay values */ +#define WX_LOW_DV(_max_frame_tc) \ + (2 * (2 * WX_B2BT(_max_frame_tc) + (36 * WX_PCI_DELAY / 25) + 1)) + +/* flow control */ +#define WX_DEFAULT_FCPAUSE 0xFFFF + #define WX_MAX_RXD 8192 #define WX_MAX_TXD 8192 @@ -881,6 +923,11 @@ enum wx_isb_idx { WX_ISB_MAX }; +struct wx_fc_info { + u32 high_water; /* Flow Ctrl High-water */ + u32 low_water; /* Flow Ctrl Low-water */ +}; + /* Statistics counters collected by the MAC */ struct wx_hw_stats { u64 gprc; @@ -921,6 +968,7 @@ struct wx { enum sp_media_type media_type; struct wx_eeprom_info eeprom; struct wx_addr_filter_info addr_ctrl; + struct wx_fc_info fc; struct wx_mac_addr *mac_table; u16 device_id; u16 vendor_id; diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c index 0f87898a55b2..9a89f9576180 100644 --- a/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c @@ -54,6 +54,8 @@ static const struct ethtool_ops ngbe_ethtool_ops = { .get_ethtool_stats = wx_get_ethtool_stats, .get_eth_mac_stats = wx_get_mac_stats, .get_pause_stats = wx_get_pause_stats, + .get_pauseparam = wx_get_pauseparam, + .set_pauseparam = wx_set_pauseparam, }; void ngbe_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c index cc75856f231a..ec54b18c5fe7 100644 --- a/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c +++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.c @@ -75,6 +75,8 @@ static void ngbe_mac_link_up(struct phylink_config *config, struct wx *wx = phylink_to_wx(config); u32 lan_speed, reg; + wx_fc_enable(wx, tx_pause, rx_pause); + switch (speed) { case SPEED_10: lan_speed = 0; diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c index 60f351a3b89d..cdaa19528248 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_ethtool.c @@ -21,6 +21,8 @@ static const struct ethtool_ops txgbe_ethtool_ops = { .get_ethtool_stats = wx_get_ethtool_stats, .get_eth_mac_stats = wx_get_mac_stats, .get_pause_stats = wx_get_pause_stats, + .get_pauseparam = wx_get_pauseparam, + .set_pauseparam = wx_set_pauseparam, }; void txgbe_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c index 3c0524d19866..b1b5cdc04a92 100644 --- a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c +++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c @@ -190,6 +190,8 @@ static void txgbe_mac_link_up(struct phylink_config *config, struct wx *wx = phylink_to_wx(config); u32 txcfg, wdg; + wx_fc_enable(wx, tx_pause, rx_pause); + txcfg = rd32(wx, WX_MAC_TX_CFG); txcfg &= ~WX_MAC_TX_CFG_SPEED_MASK;