diff mbox series

[net-next,v4,3/4] net: phy: at803x: add support for cdt cross short test for qca808x

Message ID 20240104213044.4653-4-ansuelsmth@gmail.com (mailing list archive)
State Accepted
Commit ea73e5ea442ee2aade67b1fb1233ccb3cbea2ceb
Delegated to: Netdev Maintainers
Headers show
Series net: phy: at803x: even more generalization | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1113 this patch: 1113
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 1140 this patch: 1140
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1140 this patch: 1140
netdev/checkpatch warning WARNING: line length of 100 exceeds 80 columns WARNING: line length of 102 exceeds 80 columns WARNING: line length of 109 exceeds 80 columns WARNING: line length of 110 exceeds 80 columns WARNING: line length of 91 exceeds 80 columns WARNING: line length of 96 exceeds 80 columns WARNING: line length of 97 exceeds 80 columns
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Christian Marangi Jan. 4, 2024, 9:30 p.m. UTC 
QCA808x PHY Family supports Cable Diagnostic Test also for Cross Pair
Short.

Add all the define to make enable and support these additional tests.

Cross Short test was previously disabled by default, this is now changed
and enabled by default. In this mode, the mask changed a bit and length
is shifted based on the fault condition.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/phy/at803x.c | 86 ++++++++++++++++++++++++++++++++--------
 1 file changed, 69 insertions(+), 17 deletions(-)

Comments

Simon Horman Jan. 5, 2024, 6:27 p.m. UTC | #1 
On Thu, Jan 04, 2024 at 10:30:40PM +0100, Christian Marangi wrote:
> QCA808x PHY Family supports Cable Diagnostic Test also for Cross Pair
> Short.
> 
> Add all the define to make enable and support these additional tests.
> 
> Cross Short test was previously disabled by default, this is now changed
> and enabled by default. In this mode, the mask changed a bit and length
> is shifted based on the fault condition.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Reviewed-by: Simon Horman <horms@kernel.org>
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 8d824094bc71..b44b91c58696 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -254,6 +254,7 @@ 
 
 #define QCA808X_CDT_ENABLE_TEST			BIT(15)
 #define QCA808X_CDT_INTER_CHECK_DIS		BIT(13)
+#define QCA808X_CDT_STATUS			BIT(11)
 #define QCA808X_CDT_LENGTH_UNIT			BIT(10)
 
 #define QCA808X_MMD3_CDT_STATUS			0x8064
@@ -261,16 +262,44 @@ 
 #define QCA808X_MMD3_CDT_DIAG_PAIR_B		0x8066
 #define QCA808X_MMD3_CDT_DIAG_PAIR_C		0x8067
 #define QCA808X_MMD3_CDT_DIAG_PAIR_D		0x8068
-#define QCA808X_CDT_DIAG_LENGTH			GENMASK(7, 0)
+#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT	GENMASK(15, 8)
+#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT	GENMASK(7, 0)
 
 #define QCA808X_CDT_CODE_PAIR_A			GENMASK(15, 12)
 #define QCA808X_CDT_CODE_PAIR_B			GENMASK(11, 8)
 #define QCA808X_CDT_CODE_PAIR_C			GENMASK(7, 4)
 #define QCA808X_CDT_CODE_PAIR_D			GENMASK(3, 0)
-#define QCA808X_CDT_STATUS_STAT_FAIL		0
-#define QCA808X_CDT_STATUS_STAT_NORMAL		1
-#define QCA808X_CDT_STATUS_STAT_OPEN		2
-#define QCA808X_CDT_STATUS_STAT_SHORT		3
+
+#define QCA808X_CDT_STATUS_STAT_TYPE		GENMASK(1, 0)
+#define QCA808X_CDT_STATUS_STAT_FAIL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
+#define QCA808X_CDT_STATUS_STAT_NORMAL		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
+#define QCA808X_CDT_STATUS_STAT_SAME_OPEN	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
+#define QCA808X_CDT_STATUS_STAT_SAME_SHORT	FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
+
+#define QCA808X_CDT_STATUS_STAT_MDI		GENMASK(3, 2)
+#define QCA808X_CDT_STATUS_STAT_MDI1		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
+#define QCA808X_CDT_STATUS_STAT_MDI2		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
+#define QCA808X_CDT_STATUS_STAT_MDI3		FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
+
+/* NORMAL are MDI with type set to 0 */
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI1
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+									 QCA808X_CDT_STATUS_STAT_MDI1)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+									 QCA808X_CDT_STATUS_STAT_MDI1)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI2
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+									 QCA808X_CDT_STATUS_STAT_MDI2)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+									 QCA808X_CDT_STATUS_STAT_MDI2)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL	QCA808X_CDT_STATUS_STAT_MDI3
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN		(QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+									 QCA808X_CDT_STATUS_STAT_MDI3)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT	(QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+									 QCA808X_CDT_STATUS_STAT_MDI3)
+
+/* Added for reference of existence but should be handled by wait_for_completion already */
+#define QCA808X_CDT_STATUS_STAT_BUSY		(BIT(1) | BIT(3))
 
 /* QCA808X 1G chip type */
 #define QCA808X_PHY_MMD7_CHIP_TYPE		0x901d
@@ -1943,8 +1972,17 @@  static int qca808x_soft_reset(struct phy_device *phydev)
 static bool qca808x_cdt_fault_length_valid(int cdt_code)
 {
 	switch (cdt_code) {
-	case QCA808X_CDT_STATUS_STAT_SHORT:
-	case QCA808X_CDT_STATUS_STAT_OPEN:
+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
 		return true;
 	default:
 		return false;
@@ -1956,17 +1994,28 @@  static int qca808x_cable_test_result_trans(int cdt_code)
 	switch (cdt_code) {
 	case QCA808X_CDT_STATUS_STAT_NORMAL:
 		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
-	case QCA808X_CDT_STATUS_STAT_SHORT:
+	case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
 		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
-	case QCA808X_CDT_STATUS_STAT_OPEN:
+	case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
 		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+	case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
 	case QCA808X_CDT_STATUS_STAT_FAIL:
 	default:
 		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
 	}
 }
 
-static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
+				    int result)
 {
 	int val;
 	u32 cdt_length_reg = 0;
@@ -1992,7 +2041,11 @@  static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair)
 	if (val < 0)
 		return val;
 
-	val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val);
+	if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
+	else
+		val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
+
 	return at803x_cdt_fault_length(val);
 }
 
@@ -2040,8 +2093,8 @@  static int qca808x_cable_test_start(struct phy_device *phydev)
 static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
 					      u16 status)
 {
+	int length, result;
 	u16 pair_code;
-	int length;
 
 	switch (pair) {
 	case ETHTOOL_A_CABLE_PAIR_A:
@@ -2060,11 +2113,11 @@  static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair
 		return -EINVAL;
 	}
 
-	ethnl_cable_test_result(phydev, pair,
-				qca808x_cable_test_result_trans(pair_code));
+	result = qca808x_cable_test_result_trans(pair_code);
+	ethnl_cable_test_result(phydev, pair, result);
 
 	if (qca808x_cdt_fault_length_valid(pair_code)) {
-		length = qca808x_cdt_fault_length(phydev, pair);
+		length = qca808x_cdt_fault_length(phydev, pair, result);
 		ethnl_cable_test_fault_length(phydev, pair, length);
 	}
 
@@ -2078,8 +2131,7 @@  static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finish
 	*finished = false;
 
 	val = QCA808X_CDT_ENABLE_TEST |
-	      QCA808X_CDT_LENGTH_UNIT |
-	      QCA808X_CDT_INTER_CHECK_DIS;
+	      QCA808X_CDT_LENGTH_UNIT;
 	ret = at803x_cdt_start(phydev, val);
 	if (ret)
 		return ret;