| Message ID | 20240105142719.11042-2-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | Deferred |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | net: phy: generic polarity + LED support for qca808x | expand |
On Fri, Jan 05, 2024 at 03:27:13PM +0100, Christian Marangi wrote: > Move LED active-low property to common.yaml. This property is currently > defined multiple times by bcm LEDs. This property will now be supported > in a generic way for PHY LEDs with the use of a generic function. > > With active-low bool property not defined, active-high is always > assumed. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
On Fri, 05 Jan 2024, Christian Marangi wrote: > Move LED active-low property to common.yaml. This property is currently > defined multiple times by bcm LEDs. This property will now be supported > in a generic way for PHY LEDs with the use of a generic function. > > With active-low bool property not defined, active-high is always > assumed. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > Changes v5: > - Make active-low generic > Changes v4: > - Drop support for global active-low > - Rework to polarity option (for marvell10g series support) > Changes v3: > - Out of RFC > Changes v2: > - Add this patch > > Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++ > Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 4 ---- > Documentation/devicetree/bindings/leds/leds-bcm6328.yaml | 4 ---- > Documentation/devicetree/bindings/leds/leds-bcm6358.txt | 2 -- > .../devicetree/bindings/leds/leds-pwm-multicolor.yaml | 4 ---- > Documentation/devicetree/bindings/leds/leds-pwm.yaml | 5 ----- > 6 files changed, 6 insertions(+), 19 deletions(-) If the DT Maintainers are happy, so am I. Acked-by: Lee Jones <lee@kernel.org>
On Fri, 05 Jan 2024 15:27:13 +0100, Christian Marangi wrote: > Move LED active-low property to common.yaml. This property is currently > defined multiple times by bcm LEDs. This property will now be supported > in a generic way for PHY LEDs with the use of a generic function. > > With active-low bool property not defined, active-high is always > assumed. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > Changes v5: > - Make active-low generic > Changes v4: > - Drop support for global active-low > - Rework to polarity option (for marvell10g series support) > Changes v3: > - Out of RFC > Changes v2: > - Add this patch > > Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++ > Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 4 ---- > Documentation/devicetree/bindings/leds/leds-bcm6328.yaml | 4 ---- > Documentation/devicetree/bindings/leds/leds-bcm6358.txt | 2 -- > .../devicetree/bindings/leds/leds-pwm-multicolor.yaml | 4 ---- > Documentation/devicetree/bindings/leds/leds-pwm.yaml | 5 ----- > 6 files changed, 6 insertions(+), 19 deletions(-) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index c8d0ba5f2327..f5b40df6b421 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -200,6 +200,12 @@ properties: #trigger-source-cells property in the source node. $ref: /schemas/types.yaml#/definitions/phandle-array + active-low: + type: boolean + description: + Makes LED active low. To turn the LED ON, line needs to be + set to low voltage instead of high. + # Required properties for flash LED child nodes: flash-max-microamp: description: diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml index 52252fb6bb32..bb20394fca5c 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml +++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml @@ -52,10 +52,6 @@ patternProperties: maxItems: 1 description: LED pin number - active-low: - type: boolean - description: Makes LED active low - required: - reg diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml index 51cc0d82c12e..f3a3ef992929 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml @@ -78,10 +78,6 @@ patternProperties: - maximum: 23 description: LED pin number (only LEDs 0 to 23 are valid). - active-low: - type: boolean - description: Makes LED active low. - brcm,hardware-controlled: type: boolean description: Makes this LED hardware controlled. diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt index 6e51c6b91ee5..211ffc3c4a20 100644 --- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt +++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt @@ -25,8 +25,6 @@ LED sub-node required properties: LED sub-node optional properties: - label : see Documentation/devicetree/bindings/leds/common.txt - - active-low : Boolean, makes LED active low. - Default : false - default-state : see Documentation/devicetree/bindings/leds/common.txt - linux,default-trigger : see diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml index bd6ec04a8727..5edfbe347341 100644 --- a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml +++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml @@ -41,10 +41,6 @@ properties: pwm-names: true - active-low: - description: For PWMs where the LED is wired to supply rather than ground. - type: boolean - color: true required: diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml index 7de6da58be3c..113b7c218303 100644 --- a/Documentation/devicetree/bindings/leds/leds-pwm.yaml +++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml @@ -34,11 +34,6 @@ patternProperties: Maximum brightness possible for the LED $ref: /schemas/types.yaml#/definitions/uint32 - active-low: - description: - For PWMs where the LED is wired to supply rather than ground. - type: boolean - required: - pwms - max-brightness
Move LED active-low property to common.yaml. This property is currently defined multiple times by bcm LEDs. This property will now be supported in a generic way for PHY LEDs with the use of a generic function. With active-low bool property not defined, active-high is always assumed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- Changes v5: - Make active-low generic Changes v4: - Drop support for global active-low - Rework to polarity option (for marvell10g series support) Changes v3: - Out of RFC Changes v2: - Add this patch Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++ Documentation/devicetree/bindings/leds/leds-bcm63138.yaml | 4 ---- Documentation/devicetree/bindings/leds/leds-bcm6328.yaml | 4 ---- Documentation/devicetree/bindings/leds/leds-bcm6358.txt | 2 -- .../devicetree/bindings/leds/leds-pwm-multicolor.yaml | 4 ---- Documentation/devicetree/bindings/leds/leds-pwm.yaml | 5 ----- 6 files changed, 6 insertions(+), 19 deletions(-)