@@ -4,4 +4,4 @@
#
obj-$(CONFIG_QCOM_PPE) += qcom-ppe.o
-qcom-ppe-objs := ppe.o ppe_ops.o ppe_debugfs.o
+qcom-ppe-objs := ppe.o ppe_ops.o ppe_debugfs.o ppe_uniphy.o
@@ -18,6 +18,7 @@
#include "ppe_regs.h"
#include "ppe_ops.h"
#include "ppe_debugfs.h"
+#include "ppe_uniphy.h"
#define PPE_SCHEDULER_PORT_NUM 8
#define MPPE_SCHEDULER_PORT_NUM 3
@@ -176,6 +177,26 @@ int ppe_type_get(struct ppe_device *ppe_dev)
return ppe_dev_priv->ppe_type;
}
+struct clk **ppe_clock_get(struct ppe_device *ppe_dev)
+{
+ struct ppe_data *ppe_dev_priv = ppe_dev->ppe_priv;
+
+ if (!ppe_dev_priv)
+ return NULL;
+
+ return ppe_dev_priv->clk;
+}
+
+struct reset_control **ppe_reset_get(struct ppe_device *ppe_dev)
+{
+ struct ppe_data *ppe_dev_priv = ppe_dev->ppe_priv;
+
+ if (!ppe_dev_priv)
+ return NULL;
+
+ return ppe_dev_priv->rst;
+}
+
static int ppe_clock_set_enable(struct ppe_device *ppe_dev,
enum ppe_clk_id clk_id, unsigned long rate)
{
@@ -1405,6 +1426,10 @@ static int qcom_ppe_probe(struct platform_device *pdev)
ret,
"ppe device hw init failed\n");
+ ppe_dev->uniphy = ppe_uniphy_setup(pdev);
+ if (IS_ERR(ppe_dev->uniphy))
+ return dev_err_probe(&pdev->dev, ret, "ppe uniphy initialization failed\n");
+
ppe_dev->ppe_ops = &qcom_ppe_ops;
ppe_dev->is_ppe_probed = true;
ppe_debugfs_setup(ppe_dev);
@@ -173,6 +173,8 @@ struct ppe_scheduler_port_resource {
};
int ppe_type_get(struct ppe_device *ppe_dev);
+struct clk **ppe_clock_get(struct ppe_device *ppe_dev);
+struct reset_control **ppe_reset_get(struct ppe_device *ppe_dev);
int ppe_write(struct ppe_device *ppe_dev, u32 reg, unsigned int val);
int ppe_read(struct ppe_device *ppe_dev, u32 reg, unsigned int *val);
new file mode 100644
@@ -0,0 +1,789 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/* PPE UNIPHY clock register and UNIPHY PCS operations for phylink.
+ *
+ * The PPE UNIPHY block is specifically used by PPE to connect the PPE MAC
+ * with the external PHYs or SFPs or Switches (fixed link). The PPE UNIPHY
+ * block includes serdes, PCS or XPCS and the control logic to support PPE
+ * ports to work in different interface mode and different link speed.
+ *
+ * The PPE UNIPHY block provides raw clock as the parent clock to NSSCC
+ * clocks and the NSSCC clocks can be configured to generate different
+ * port Tx and Rx clocks to PPE ports in different port link speed.
+ */
+
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/clk-provider.h>
+#include <linux/soc/qcom/ppe.h>
+#include "ppe.h"
+#include "ppe_uniphy.h"
+
+/* UNIPHY clock direction */
+enum {
+ UNIPHY_RX = 0,
+ UNIPHY_TX,
+};
+
+/* UNIPHY clock data type */
+struct clk_uniphy {
+ struct clk_hw hw;
+ u8 index;
+ u8 dir;
+ unsigned long rate;
+};
+
+#define to_clk_uniphy(_hw) container_of(_hw, struct clk_uniphy, hw)
+/* UNIPHY clock rate */
+#define UNIPHY_CLK_RATE_125M 125000000
+#define UNIPHY_CLK_RATE_312P5M 312500000
+
+static void ppe_uniphy_write(struct ppe_uniphy *uniphy, u32 val, u32 reg)
+{
+ if (reg >= UNIPHY_INDIRECT_ADDR_START) {
+ writel(FIELD_GET(UNIPHY_INDIRECT_ADDR_HIGH, reg),
+ uniphy->base + UNIPHY_INDIRECT_AHB_ADDR);
+ writel(val, uniphy->base + UNIPHY_INDIRECT_DATA_ADDR(reg));
+ } else {
+ writel(val, uniphy->base + reg);
+ }
+}
+
+static u32 ppe_uniphy_read(struct ppe_uniphy *uniphy, u32 reg)
+{
+ if (reg >= UNIPHY_INDIRECT_ADDR_START) {
+ writel(FIELD_GET(UNIPHY_INDIRECT_ADDR_HIGH, reg),
+ uniphy->base + UNIPHY_INDIRECT_AHB_ADDR);
+ return readl(uniphy->base + UNIPHY_INDIRECT_DATA_ADDR(reg));
+ } else {
+ return readl(uniphy->base + reg);
+ }
+}
+
+static int ppe_uniphy_mask(struct ppe_uniphy *uniphy, u32 reg, u32 mask, u32 set)
+{
+ u32 val;
+
+ val = ppe_uniphy_read(uniphy, reg);
+ val &= ~mask;
+ val |= set;
+ ppe_uniphy_write(uniphy, val, reg);
+
+ return 0;
+}
+
+static unsigned long clk_uniphy_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_uniphy *uniphy = to_clk_uniphy(hw);
+
+ return uniphy->rate;
+}
+
+static int clk_uniphy_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ if (req->rate <= UNIPHY_CLK_RATE_125M)
+ req->rate = UNIPHY_CLK_RATE_125M;
+ else
+ req->rate = UNIPHY_CLK_RATE_312P5M;
+
+ return 0;
+}
+
+static int clk_uniphy_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_uniphy *uniphy = to_clk_uniphy(hw);
+
+ if (rate != UNIPHY_CLK_RATE_125M && rate != UNIPHY_CLK_RATE_312P5M)
+ return -1;
+
+ uniphy->rate = rate;
+
+ return 0;
+}
+
+static const struct clk_ops clk_uniphy_ops = {
+ .recalc_rate = clk_uniphy_recalc_rate,
+ .determine_rate = clk_uniphy_determine_rate,
+ .set_rate = clk_uniphy_set_rate,
+};
+
+static struct clk_uniphy uniphy0_gcc_rx_clk = {
+ .hw.init = &(struct clk_init_data){
+ .name = "uniphy0_gcc_rx_clk",
+ .ops = &clk_uniphy_ops,
+ },
+ .index = 0,
+ .dir = UNIPHY_RX,
+ .rate = UNIPHY_CLK_RATE_125M,
+};
+
+static struct clk_uniphy uniphy0_gcc_tx_clk = {
+ .hw.init = &(struct clk_init_data){
+ .name = "uniphy0_gcc_tx_clk",
+ .ops = &clk_uniphy_ops,
+ },
+ .index = 0,
+ .dir = UNIPHY_TX,
+ .rate = UNIPHY_CLK_RATE_125M,
+};
+
+static struct clk_uniphy uniphy1_gcc_rx_clk = {
+ .hw.init = &(struct clk_init_data){
+ .name = "uniphy1_gcc_rx_clk",
+ .ops = &clk_uniphy_ops,
+ },
+ .index = 1,
+ .dir = UNIPHY_RX,
+ .rate = UNIPHY_CLK_RATE_312P5M,
+};
+
+static struct clk_uniphy uniphy1_gcc_tx_clk = {
+ .hw.init = &(struct clk_init_data){
+ .name = "uniphy1_gcc_tx_clk",
+ .ops = &clk_uniphy_ops,
+ },
+ .index = 1,
+ .dir = UNIPHY_TX,
+ .rate = UNIPHY_CLK_RATE_312P5M,
+};
+
+static struct clk_uniphy uniphy2_gcc_rx_clk = {
+ .hw.init = &(struct clk_init_data){
+ .name = "uniphy2_gcc_rx_clk",
+ .ops = &clk_uniphy_ops,
+ },
+ .index = 2,
+ .dir = UNIPHY_RX,
+ .rate = UNIPHY_CLK_RATE_312P5M,
+};
+
+static struct clk_uniphy uniphy2_gcc_tx_clk = {
+ .hw.init = &(struct clk_init_data){
+ .name = "uniphy2_gcc_tx_clk",
+ .ops = &clk_uniphy_ops,
+ },
+ .index = 2,
+ .dir = UNIPHY_TX,
+ .rate = UNIPHY_CLK_RATE_312P5M,
+};
+
+static struct clk_hw *uniphy_raw_clks[] = {
+ &uniphy0_gcc_rx_clk.hw, &uniphy0_gcc_tx_clk.hw,
+ &uniphy1_gcc_rx_clk.hw, &uniphy1_gcc_tx_clk.hw,
+ &uniphy2_gcc_rx_clk.hw, &uniphy2_gcc_tx_clk.hw,
+};
+
+int ppe_uniphy_port_gcc_clock_en_set(struct ppe_uniphy *uniphy, int port, bool enable)
+{
+ struct clk **clock = ppe_clock_get(uniphy->ppe_dev);
+ enum ppe_clk_id rx_id, tx_id;
+ int err = 0;
+
+ rx_id = PPE_UNIPHY_PORT1_RX_CLK + ((port - 1) << 1);
+ tx_id = PPE_UNIPHY_PORT1_TX_CLK + ((port - 1) << 1);
+
+ if (enable) {
+ if (!IS_ERR(clock[rx_id])) {
+ err = clk_prepare_enable(clock[rx_id]);
+ if (err) {
+ dev_err(uniphy->ppe_dev->dev,
+ "Failed to enable uniphy port %d rx_clk(%d)\n",
+ port, rx_id);
+ return err;
+ }
+ }
+
+ if (!IS_ERR(clock[tx_id])) {
+ err = clk_prepare_enable(clock[tx_id]);
+ if (err) {
+ dev_err(uniphy->ppe_dev->dev,
+ "Failed to enable uniphy port %d tx_clk(%d)\n",
+ port, tx_id);
+ return err;
+ }
+ }
+ } else {
+ clk_disable_unprepare(clock[rx_id]);
+ clk_disable_unprepare(clock[tx_id]);
+ }
+
+ return 0;
+}
+
+static int ppe_uniphy_interface_gcc_clock_en_set(struct ppe_uniphy *uniphy, bool enable)
+{
+ int ppe_type = ppe_type_get(uniphy->ppe_dev);
+ int port = 0;
+
+ switch (uniphy->index) {
+ case 2:
+ ppe_uniphy_port_gcc_clock_en_set(uniphy, PPE_PORT6, enable);
+ break;
+ case 1:
+ if (ppe_type == PPE_TYPE_APPE)
+ ppe_uniphy_port_gcc_clock_en_set(uniphy, PPE_PORT5, enable);
+ else if (ppe_type == PPE_TYPE_MPPE)
+ ppe_uniphy_port_gcc_clock_en_set(uniphy, PPE_PORT2, enable);
+ break;
+ case 0:
+ if (ppe_type == PPE_TYPE_APPE) {
+ for (port = PPE_PORT1; port <= PPE_PORT4; port++)
+ ppe_uniphy_port_gcc_clock_en_set(uniphy, port, enable);
+ } else if (ppe_type == PPE_TYPE_MPPE) {
+ ppe_uniphy_port_gcc_clock_en_set(uniphy, PPE_PORT1, enable);
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ppe_uniphy_gcc_xpcs_reset(struct ppe_uniphy *uniphy, bool enable)
+{
+ struct reset_control **reset = ppe_reset_get(uniphy->ppe_dev);
+ enum ppe_rst_id id = PPE_UNIPHY0_XPCS_RST + uniphy->index;
+
+ if (IS_ERR(reset[id]))
+ return PTR_ERR(reset[id]);
+
+ if (enable)
+ return reset_control_assert(reset[id]);
+ else
+ return reset_control_deassert(reset[id]);
+}
+
+static int ppe_uniphy_gcc_software_reset(struct ppe_uniphy *uniphy)
+{
+ struct reset_control **reset = ppe_reset_get(uniphy->ppe_dev);
+ int ppe_type = ppe_type_get(uniphy->ppe_dev);
+ unsigned int index = uniphy->index;
+ int err = 0, port = 0;
+
+ /* Assert uniphy sys reset control */
+ if (!IS_ERR(reset[PPE_UNIPHY0_SYS_RST + index])) {
+ err = reset_control_assert(reset[PPE_UNIPHY0_SYS_RST + index]);
+ if (err)
+ return err;
+ }
+
+ /* Assert uniphy port reset control */
+ switch (ppe_type) {
+ case PPE_TYPE_APPE:
+ if (index == 0) {
+ for (port = PPE_PORT1; port <= PPE_PORT4; port++) {
+ if (!IS_ERR(reset[PPE_UNIPHY_PORT1_DIS + port - 1])) {
+ err = reset_control_assert(reset[PPE_UNIPHY_PORT1_DIS +
+ port - 1]);
+ if (err)
+ return err;
+ }
+ }
+ } else {
+ if (!IS_ERR(reset[PPE_UNIPHY0_SOFT_RST + index])) {
+ err = reset_control_assert(reset[PPE_UNIPHY0_SOFT_RST + index]);
+ if (err)
+ return err;
+ }
+ }
+ break;
+ case PPE_TYPE_MPPE:
+ if (!IS_ERR(reset[PPE_UNIPHY_PORT1_RX_RST + (index << 1)])) {
+ err = reset_control_assert(reset[PPE_UNIPHY_PORT1_RX_RST + (index << 1)]);
+ if (err)
+ return err;
+ }
+
+ if (!IS_ERR(reset[PPE_UNIPHY_PORT1_TX_RST + (index << 1)])) {
+ err = reset_control_assert(reset[PPE_UNIPHY_PORT1_TX_RST + (index << 1)]);
+ if (err)
+ return err;
+ }
+ break;
+ default:
+ break;
+ }
+ fsleep(100000);
+
+ /* Deassert uniphy sys reset control */
+ if (!IS_ERR(reset[PPE_UNIPHY0_SYS_RST + index])) {
+ err = reset_control_deassert(reset[PPE_UNIPHY0_SYS_RST + index]);
+ if (err)
+ return err;
+ }
+
+ /* Deassert uniphy port reset control */
+ switch (ppe_type) {
+ case PPE_TYPE_APPE:
+ if (index == 0) {
+ for (port = PPE_PORT1; port <= PPE_PORT4; port++) {
+ if (!IS_ERR(reset[PPE_UNIPHY_PORT1_DIS + port - 1])) {
+ err = reset_control_deassert(reset[PPE_UNIPHY_PORT1_DIS +
+ port - 1]);
+ if (err)
+ return err;
+ }
+ }
+ } else {
+ if (!IS_ERR(reset[PPE_UNIPHY0_SOFT_RST + index])) {
+ err = reset_control_deassert(reset[PPE_UNIPHY0_SOFT_RST + index]);
+ if (err)
+ return err;
+ }
+ }
+ break;
+ case PPE_TYPE_MPPE:
+ if (!IS_ERR(reset[PPE_UNIPHY_PORT1_RX_RST + (index << 1)])) {
+ err = reset_control_deassert(reset[PPE_UNIPHY_PORT1_RX_RST + (index << 1)]);
+ if (err)
+ return err;
+ }
+
+ if (!IS_ERR(reset[PPE_UNIPHY_PORT1_TX_RST + (index << 1)])) {
+ err = reset_control_deassert(reset[PPE_UNIPHY_PORT1_TX_RST + (index << 1)]);
+ if (err)
+ return err;
+ }
+ break;
+ default:
+ break;
+ }
+ fsleep(100000);
+
+ return err;
+}
+
+int ppe_uniphy_autoneg_complete_check(struct ppe_uniphy *uniphy, int port)
+{
+ u32 reg, val;
+ int channel, ret;
+
+ if (uniphy->interface == PHY_INTERFACE_MODE_USXGMII ||
+ uniphy->interface == PHY_INTERFACE_MODE_QUSGMII) {
+ /* Only uniphy0 may have multi channels */
+ channel = (uniphy->index == 0) ? (port - 1) : 0;
+ reg = (channel == 0) ? VR_MII_AN_INTR_STS_ADDR :
+ VR_MII_AN_INTR_STS_CHANNEL_ADDR(channel);
+
+ /* Wait auto negotiation complete */
+ ret = read_poll_timeout(ppe_uniphy_read, val,
+ (val & CL37_ANCMPLT_INTR),
+ 1000, 100000, true,
+ uniphy, reg);
+ if (ret) {
+ dev_err(uniphy->ppe_dev->dev,
+ "uniphy %d auto negotiation timeout\n", uniphy->index);
+ return ret;
+ }
+
+ /* Clear auto negotiation complete interrupt */
+ ppe_uniphy_mask(uniphy, reg, CL37_ANCMPLT_INTR, 0);
+ }
+
+ return 0;
+}
+
+int ppe_uniphy_speed_set(struct ppe_uniphy *uniphy, int port, int speed)
+{
+ u32 reg, val;
+ int channel;
+
+ if (uniphy->interface == PHY_INTERFACE_MODE_USXGMII ||
+ uniphy->interface == PHY_INTERFACE_MODE_QUSGMII) {
+ /* Only uniphy0 may have multiple channels */
+ channel = (uniphy->index == 0) ? (port - 1) : 0;
+
+ reg = (channel == 0) ? SR_MII_CTRL_ADDR :
+ SR_MII_CTRL_CHANNEL_ADDR(channel);
+
+ switch (speed) {
+ case SPEED_100:
+ val = USXGMII_SPEED_100;
+ break;
+ case SPEED_1000:
+ val = USXGMII_SPEED_1000;
+ break;
+ case SPEED_2500:
+ val = USXGMII_SPEED_2500;
+ break;
+ case SPEED_5000:
+ val = USXGMII_SPEED_5000;
+ break;
+ case SPEED_10000:
+ val = USXGMII_SPEED_10000;
+ break;
+ case SPEED_10:
+ val = USXGMII_SPEED_10;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ ppe_uniphy_mask(uniphy, reg, USXGMII_SPEED_MASK, val);
+ }
+
+ return 0;
+}
+
+int ppe_uniphy_duplex_set(struct ppe_uniphy *uniphy, int port, int duplex)
+{
+ u32 reg;
+ int channel;
+
+ if (uniphy->interface == PHY_INTERFACE_MODE_USXGMII &&
+ uniphy->interface == PHY_INTERFACE_MODE_QUSGMII) {
+ /* Only uniphy0 may have multiple channels */
+ channel = (uniphy->index == 0) ? (port - 1) : 0;
+
+ reg = (channel == 0) ? SR_MII_CTRL_ADDR :
+ SR_MII_CTRL_CHANNEL_ADDR(channel);
+
+ ppe_uniphy_mask(uniphy, reg, USXGMII_DUPLEX_FULL,
+ (duplex == DUPLEX_FULL) ? USXGMII_DUPLEX_FULL : 0);
+ }
+
+ return 0;
+}
+
+int ppe_uniphy_adapter_reset(struct ppe_uniphy *uniphy, int port)
+{
+ int channel;
+
+ /* Only uniphy0 may have multiple channels */
+ channel = (uniphy->index == 0) ? (port - 1) : 0;
+
+ switch (uniphy->interface) {
+ case PHY_INTERFACE_MODE_USXGMII:
+ case PHY_INTERFACE_MODE_QUSGMII:
+ if (channel == 0)
+ ppe_uniphy_mask(uniphy,
+ VR_XS_PCS_DIG_CTRL1_ADDR,
+ USRA_RST, USRA_RST);
+ else
+ ppe_uniphy_mask(uniphy,
+ VR_MII_DIG_CTRL1_CHANNEL_ADDR(channel),
+ CHANNEL_USRA_RST, CHANNEL_USRA_RST);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ case PHY_INTERFACE_MODE_QSGMII:
+ ppe_uniphy_mask(uniphy,
+ UNIPHY_CHANNEL_INPUT_OUTPUT_4_ADDR(channel),
+ NEWADDEDFROMHERE_CH_ADP_SW_RSTN, 0);
+ ppe_uniphy_mask(uniphy,
+ UNIPHY_CHANNEL_INPUT_OUTPUT_4_ADDR(channel),
+ NEWADDEDFROMHERE_CH_ADP_SW_RSTN,
+ NEWADDEDFROMHERE_CH_ADP_SW_RSTN);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ppe_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+ phy_interface_t interface,
+ const unsigned long *advertising,
+ bool permit_pause_to_mac)
+{
+ struct ppe_uniphy *uniphy = pcs_to_ppe_uniphy(pcs);
+ unsigned long rate = 0;
+ int ret, channel = 0;
+ u32 val = 0;
+
+ if (uniphy->interface == interface)
+ return 0;
+
+ uniphy->interface = interface;
+
+ /* Disable gcc uniphy interface clock */
+ ppe_uniphy_interface_gcc_clock_en_set(uniphy, false);
+
+ /* Assert gcc uniphy xpcs reset control */
+ ppe_uniphy_gcc_xpcs_reset(uniphy, true);
+
+ /* Configure uniphy mode */
+ switch (interface) {
+ case PHY_INTERFACE_MODE_USXGMII:
+ case PHY_INTERFACE_MODE_10GBASER:
+ case PHY_INTERFACE_MODE_QUSGMII:
+ rate = UNIPHY_CLK_RATE_312P5M;
+ ppe_uniphy_mask(uniphy, UNIPHY_MODE_CTRL_ADDR,
+ USXGMII_MODE_CTRL_MASK, USXGMII_MODE_CTRL);
+ break;
+ case PHY_INTERFACE_MODE_2500BASEX:
+ rate = UNIPHY_CLK_RATE_312P5M;
+ ppe_uniphy_mask(uniphy, UNIPHY_MODE_CTRL_ADDR,
+ SGMIIPLUS_MODE_CTRL_MASK, SGMIIPLUS_MODE_CTRL);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_1000BASEX:
+ rate = UNIPHY_CLK_RATE_125M;
+ ppe_uniphy_mask(uniphy, UNIPHY_MODE_CTRL_ADDR,
+ SGMII_MODE_CTRL_MASK, SGMII_MODE_CTRL);
+ break;
+ case PHY_INTERFACE_MODE_QSGMII:
+ rate = UNIPHY_CLK_RATE_125M;
+ ppe_uniphy_mask(uniphy, UNIPHY_MODE_CTRL_ADDR,
+ QSGMII_MODE_CTRL_MASK, QSGMII_MODE_CTRL);
+ break;
+ default:
+ break;
+ }
+
+ if (interface == PHY_INTERFACE_MODE_QUSGMII)
+ ppe_uniphy_mask(uniphy, UNIPHY_QP_USXG_OPITON1_ADDR,
+ GMII_SRC_SEL, GMII_SRC_SEL);
+
+ if (interface == PHY_INTERFACE_MODE_10GBASER)
+ ppe_uniphy_mask(uniphy, UNIPHY_LINK_DETECT_ADDR,
+ DETECT_LOS_FROM_SFP, UNIPHY_10GR_LINK_LOSS);
+
+ /* Reset uniphy gcc software reset control */
+ ppe_uniphy_gcc_software_reset(uniphy);
+
+ /* Wait uniphy calibration completion */
+ ret = read_poll_timeout(ppe_uniphy_read, val,
+ (val & MMD1_REG_CALIBRATION_DONE_REG),
+ 1000, 100000, true,
+ uniphy, UNIPHY_OFFSET_CALIB_4_ADDR);
+ if (ret) {
+ dev_err(uniphy->ppe_dev->dev,
+ "uniphy %d calibration timeout\n", uniphy->index);
+ return ret;
+ }
+
+ /* Enable gcc uniphy interface clk */
+ ppe_uniphy_interface_gcc_clock_en_set(uniphy, true);
+
+ /* Deassert gcc uniphy xpcs reset control */
+ if (interface == PHY_INTERFACE_MODE_USXGMII ||
+ interface == PHY_INTERFACE_MODE_10GBASER ||
+ interface == PHY_INTERFACE_MODE_QUSGMII)
+ ppe_uniphy_gcc_xpcs_reset(uniphy, false);
+
+ if (interface == PHY_INTERFACE_MODE_USXGMII ||
+ interface == PHY_INTERFACE_MODE_QUSGMII) {
+ /* Wait 10gr link up */
+ ret = read_poll_timeout(ppe_uniphy_read, val,
+ (val & SR_XS_PCS_KR_STS1_PLU),
+ 1000, 100000, true,
+ uniphy, SR_XS_PCS_KR_STS1_ADDR);
+ if (ret)
+ dev_warn(uniphy->ppe_dev->dev,
+ "uniphy %d 10gr linkup timeout\n", uniphy->index);
+
+ /* Enable usxgmii */
+ ppe_uniphy_mask(uniphy, VR_XS_PCS_DIG_CTRL1_ADDR, USXGMII_EN, USXGMII_EN);
+
+ if (interface == PHY_INTERFACE_MODE_QUSGMII) {
+ /* XPCS set quxgmii mode */
+ ppe_uniphy_mask(uniphy, VR_XS_PCS_DIG_STS_ADDR, AM_COUNT, QUXGMII_AM_COUNT);
+ ppe_uniphy_mask(uniphy, VR_XS_PCS_KR_CTRL_ADDR, USXG_MODE, QUXGMII_MODE);
+ /* XPCS software reset */
+ ppe_uniphy_mask(uniphy, VR_XS_PCS_DIG_CTRL1_ADDR, VR_RST, VR_RST);
+ }
+
+ /* Enable autoneg complete interrupt and 10M/100M 8bit mii width */
+ ppe_uniphy_mask(uniphy, VR_MII_AN_CTRL_ADDR,
+ MII_AN_INTR_EN | MII_CTRL, MII_AN_INTR_EN | MII_CTRL);
+
+ if (interface == PHY_INTERFACE_MODE_QUSGMII) {
+ for (channel = 1; channel <= 3; channel++)
+ ppe_uniphy_mask(uniphy, VR_MII_AN_CTRL_CHANNEL_ADDR(channel),
+ MII_AN_INTR_EN | MII_CTRL,
+ MII_AN_INTR_EN | MII_CTRL);
+ /* Disable TICD */
+ ppe_uniphy_mask(uniphy, VR_XAUI_MODE_CTRL_ADDR, IPG_CHECK, IPG_CHECK);
+ for (channel = 1; channel <= 3; channel++)
+ ppe_uniphy_mask(uniphy, VR_XAUI_MODE_CTRL_CHANNEL_ADDR(channel),
+ IPG_CHECK, IPG_CHECK);
+ }
+
+ /* Enable autoneg ability and usxgmii 10g speed and full duplex */
+ ppe_uniphy_mask(uniphy, SR_MII_CTRL_ADDR,
+ USXGMII_SPEED_MASK | AN_ENABLE | USXGMII_DUPLEX_FULL,
+ USXGMII_SPEED_10000 | AN_ENABLE | USXGMII_DUPLEX_FULL);
+ if (interface == PHY_INTERFACE_MODE_QUSGMII) {
+ for (channel = 1; channel <= 3; channel++)
+ ppe_uniphy_mask(uniphy, SR_MII_CTRL_CHANNEL_ADDR(channel),
+ USXGMII_SPEED_MASK | AN_ENABLE |
+ USXGMII_DUPLEX_FULL,
+ USXGMII_SPEED_10000 | AN_ENABLE |
+ USXGMII_DUPLEX_FULL);
+
+ /* Enable eee transparent mode */
+ ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_MCTRL0_ADDR,
+ MULT_FACT_100NS | SIGN_BIT,
+ FIELD_PREP(MULT_FACT_100NS, 0x1) | SIGN_BIT);
+ ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_TXTIMER_ADDR,
+ TSL_RES | T1U_RES | TWL_RES,
+ UNIPHY_XPCS_TSL_TIMER |
+ UNIPHY_XPCS_T1U_TIMER | UNIPHY_XPCS_TWL_TIMER);
+ ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_RXTIMER_ADDR,
+ RES_100U | TWR_RES,
+ UNIPHY_XPCS_100US_TIMER | UNIPHY_XPCS_TWR_TIMER);
+
+ ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_MCTRL1_ADDR,
+ TRN_LPI | TRN_RXLPI, TRN_LPI | TRN_RXLPI);
+ ppe_uniphy_mask(uniphy, VR_XS_PCS_EEE_MCTRL0_ADDR,
+ LTX_EN | LRX_EN, LTX_EN | LRX_EN);
+ }
+ }
+
+ /* Set uniphy raw clk rate */
+ clk_set_rate(uniphy_raw_clks[(uniphy->index << 1) + UNIPHY_RX]->clk,
+ rate);
+ clk_set_rate(uniphy_raw_clks[(uniphy->index << 1) + UNIPHY_TX]->clk,
+ rate);
+
+ dev_info(uniphy->ppe_dev->dev,
+ "ppe pcs config uniphy index %d, interface %s\n",
+ uniphy->index, phy_modes(interface));
+
+ return 0;
+}
+
+static void ppe_pcs_get_state(struct phylink_pcs *pcs,
+ struct phylink_link_state *state)
+{
+ struct ppe_uniphy *uniphy = pcs_to_ppe_uniphy(pcs);
+ u32 val;
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_10GBASER:
+ val = ppe_uniphy_read(uniphy, SR_XS_PCS_KR_STS1_ADDR);
+ state->link = (val & SR_XS_PCS_KR_STS1_PLU) ? 1 : 0;
+ state->duplex = DUPLEX_FULL;
+ state->speed = SPEED_10000;
+ state->pause |= (MLO_PAUSE_RX | MLO_PAUSE_TX);
+ break;
+ case PHY_INTERFACE_MODE_2500BASEX:
+ val = ppe_uniphy_read(uniphy, UNIPHY_CHANNEL0_INPUT_OUTPUT_6_ADDR);
+ state->link = (val & NEWADDEDFROMHERE_CH0_LINK_MAC) ? 1 : 0;
+ state->duplex = DUPLEX_FULL;
+ state->speed = SPEED_2500;
+ state->pause |= (MLO_PAUSE_RX | MLO_PAUSE_TX);
+ break;
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_SGMII:
+ val = ppe_uniphy_read(uniphy, UNIPHY_CHANNEL0_INPUT_OUTPUT_6_ADDR);
+ state->link = (val & NEWADDEDFROMHERE_CH0_LINK_MAC) ? 1 : 0;
+ state->duplex = (val & NEWADDEDFROMHERE_CH0_DUPLEX_MODE_MAC) ?
+ DUPLEX_FULL : DUPLEX_HALF;
+ if (FIELD_GET(NEWADDEDFROMHERE_CH0_SPEED_MODE_MAC, val) == UNIPHY_SPEED_10M)
+ state->speed = SPEED_10;
+ else if (FIELD_GET(NEWADDEDFROMHERE_CH0_SPEED_MODE_MAC, val) == UNIPHY_SPEED_100M)
+ state->speed = SPEED_100;
+ else if (FIELD_GET(NEWADDEDFROMHERE_CH0_SPEED_MODE_MAC, val) == UNIPHY_SPEED_1000M)
+ state->speed = SPEED_1000;
+ state->pause |= (MLO_PAUSE_RX | MLO_PAUSE_TX);
+ break;
+ default:
+ break;
+ }
+}
+
+static void ppe_pcs_an_restart(struct phylink_pcs *pcs)
+{
+}
+
+static const struct phylink_pcs_ops ppe_pcs_ops = {
+ .pcs_get_state = ppe_pcs_get_state,
+ .pcs_config = ppe_pcs_config,
+ .pcs_an_restart = ppe_pcs_an_restart,
+};
+
+static void uniphy_clk_release_provider(void *res)
+{
+ of_clk_del_provider(res);
+}
+
+struct ppe_uniphy *ppe_uniphy_setup(struct platform_device *pdev)
+{
+ struct clk_hw_onecell_data *uniphy_clk_data = NULL;
+ struct device_node *np;
+ struct ppe_device *ppe_dev = platform_get_drvdata(pdev);
+ struct ppe_uniphy *uniphy;
+ int i, ret, clk_num = 0;
+
+ np = of_get_child_by_name(pdev->dev.of_node, "qcom-uniphy");
+ if (!np) {
+ dev_err(&pdev->dev, "Failed to find uniphy node\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ /* Register uniphy raw clock */
+ clk_num = of_property_count_strings(np, "clock-output-names");
+ if (clk_num < 0) {
+ dev_err(&pdev->dev, "%pOFn: invalid clock output count\n", np);
+ goto err_node_put;
+ }
+
+ uniphy_clk_data = devm_kzalloc(&pdev->dev,
+ struct_size(uniphy_clk_data, hws, clk_num),
+ GFP_KERNEL);
+ if (!uniphy_clk_data) {
+ ret = -ENOMEM;
+ goto err_node_put;
+ }
+
+ uniphy_clk_data->num = clk_num;
+ for (i = 0; i < clk_num; i++) {
+ ret = of_property_read_string_index(np, "clock-output-names", i,
+ (const char **)&uniphy_raw_clks[i]->init->name);
+ if (ret) {
+ dev_err(&pdev->dev, "invalid clock name @ %pOFn\n", np);
+ goto err_node_put;
+ }
+
+ ret = devm_clk_hw_register(&pdev->dev, uniphy_raw_clks[i]);
+ if (ret)
+ goto err_node_put;
+ uniphy_clk_data->hws[i] = uniphy_raw_clks[i];
+ }
+
+ ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, uniphy_clk_data);
+ if (ret)
+ goto err_node_put;
+
+ ret = devm_add_action_or_reset(&pdev->dev, uniphy_clk_release_provider, np);
+ if (ret)
+ goto err_node_put;
+
+ /* Initialize each uniphy structure */
+ uniphy = devm_kzalloc(&pdev->dev, sizeof(*uniphy) * (clk_num >> 1), GFP_KERNEL);
+ if (!uniphy) {
+ ret = -ENOMEM;
+ goto err_node_put;
+ }
+
+ for (i = 0; i < (clk_num >> 1); i++) {
+ uniphy[i].base = devm_of_iomap(&pdev->dev, np, i, NULL);
+ if (IS_ERR(uniphy[i].base)) {
+ ret = PTR_ERR(uniphy[i].base);
+ goto err_node_put;
+ }
+ uniphy[i].index = i;
+ uniphy[i].interface = PHY_INTERFACE_MODE_NA;
+ uniphy[i].ppe_dev = ppe_dev;
+ uniphy[i].pcs.ops = &ppe_pcs_ops;
+ uniphy[i].pcs.poll = true;
+ }
+ of_node_put(np);
+ return uniphy;
+
+err_node_put:
+ of_node_put(np);
+ return ERR_PTR(ret);
+}
new file mode 100644
@@ -0,0 +1,227 @@
+/* SPDX-License-Identifier: GPL-2.0-only
+ *
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/* PPE UNIPHY functions and UNIPHY hardware registers declarations. */
+
+#ifndef _PPE_UNIPHY_H_
+#define _PPE_UNIPHY_H_
+
+#include <linux/phylink.h>
+
+#define UNIPHY_INDIRECT_ADDR_START 0x8000
+#define UNIPHY_INDIRECT_AHB_ADDR 0x83fc
+#define UNIPHY_INDIRECT_ADDR_HIGH GENMASK(20, 8)
+#define UNIPHY_INDIRECT_ADDR_LOW GENMASK(7, 0)
+#define UNIPHY_INDIRECT_DATA_ADDR(reg) (FIELD_PREP(GENMASK(15, 10), 0x20) | \
+ FIELD_PREP(GENMASK(9, 2), \
+ FIELD_GET(UNIPHY_INDIRECT_ADDR_LOW, reg)))
+
+/* [register] UNIPHY_MISC2 */
+#define UNIPHY_MISC2_ADDR 0x218
+#define PHY_MODE GENMASK(6, 4)
+#define USXGMII_PHY_MODE (FIELD_PREP(PHY_MODE, 0x7))
+#define SGMII_PLUS_PHY_MODE (FIELD_PREP(PHY_MODE, 0x5))
+#define SGMII_PHY_MODE (FIELD_PREP(PHY_MODE, 0x3))
+
+/* [register] UNIPHY_MODE_CTRL */
+#define UNIPHY_MODE_CTRL_ADDR 0x46c
+#define NEWADDEDFROMHERE_CH0_AUTONEG_MODE BIT(0)
+#define NEWADDEDFROMHERE_CH1_CH0_SGMII BIT(1)
+#define NEWADDEDFROMHERE_CH4_CH1_0_SGMII BIT(2)
+#define NEWADDEDFROMHERE_SGMII_EVEN_LOW BIT(3)
+#define NEWADDEDFROMHERE_CH0_MODE_CTRL_25M GENMASK(6, 4)
+#define NEWADDEDFROMHERE_CH0_QSGMII_SGMII BIT(8)
+#define NEWADDEDFROMHERE_CH0_PSGMII_QSGMII BIT(9)
+#define NEWADDEDFROMHERE_SG_MODE BIT(10)
+#define NEWADDEDFROMHERE_SGPLUS_MODE BIT(11)
+#define NEWADDEDFROMHERE_XPCS_MODE BIT(12)
+#define NEWADDEDFROMHERE_USXG_EN BIT(13)
+#define NEWADDEDFROMHERE_SW_V17_V18 BIT(15)
+#define USXGMII_MODE_CTRL_MASK GENMASK(12, 8)
+#define USXGMII_MODE_CTRL NEWADDEDFROMHERE_XPCS_MODE
+#define TEN_GR_MODE_CTRL_MASK GENMASK(12, 8)
+#define TEN_GR_MODE_CTRL NEWADDEDFROMHERE_XPCS_MODE
+#define QUSGMII_MODE_CTRL_MASK GENMASK(12, 8)
+#define QUSGMII_MODE_CTRL NEWADDEDFROMHERE_XPCS_MODE
+#define SGMIIPLUS_MODE_CTRL_MASK (NEWADDEDFROMHERE_CH0_AUTONEG_MODE | \
+ GENMASK(12, 8))
+#define SGMIIPLUS_MODE_CTRL NEWADDEDFROMHERE_SGPLUS_MODE
+#define QSGMII_MODE_CTRL_MASK (NEWADDEDFROMHERE_CH0_AUTONEG_MODE | \
+ GENMASK(12, 8))
+#define QSGMII_MODE_CTRL NEWADDEDFROMHERE_CH0_PSGMII_QSGMII
+#define SGMII_MODE_CTRL_MASK (NEWADDEDFROMHERE_CH0_AUTONEG_MODE | \
+ GENMASK(12, 8))
+#define SGMII_MODE_CTRL NEWADDEDFROMHERE_SG_MODE
+
+/* [register] UNIPHY_CHANNEL_INPUT_OUTPUT_4 */
+#define UNIPHY_CHANNEL0_INPUT_OUTPUT_4_ADDR 0x480
+#define NEWADDEDFROMHERE_CH0_ADP_SW_RSTN BIT(11)
+#define UNIPHY_CHANNEL1_INPUT_OUTPUT_4_ADDR 0x498
+#define NEWADDEDFROMHERE_CH1_ADP_SW_RSTN BIT(11)
+#define UNIPHY_CHANNEL2_INPUT_OUTPUT_4_ADDR 0x4b0
+#define NEWADDEDFROMHERE_CH2_ADP_SW_RSTN BIT(11)
+#define UNIPHY_CHANNEL3_INPUT_OUTPUT_4_ADDR 0x4c8
+#define NEWADDEDFROMHERE_CH3_ADP_SW_RSTN BIT(11)
+#define UNIPHY_CHANNEL4_INPUT_OUTPUT_4_ADDR 0x4e0
+#define NEWADDEDFROMHERE_CH4_ADP_SW_RSTN BIT(11)
+#define UNIPHY_CHANNEL_INPUT_OUTPUT_4_ADDR(x) (0x480 + 0x18 * (x))
+#define NEWADDEDFROMHERE_CH_ADP_SW_RSTN BIT(11)
+
+/* [register] UNIPHY_CHANNEL_INPUT_OUTPUT_6 */
+#define UNIPHY_CHANNEL0_INPUT_OUTPUT_6_ADDR 0x488
+#define NEWADDEDFROMHERE_CH0_LINK_MAC BIT(7)
+#define NEWADDEDFROMHERE_CH0_DUPLEX_MODE_MAC BIT(6)
+#define NEWADDEDFROMHERE_CH0_SPEED_MODE_MAC GENMASK(5, 4)
+#define NEWADDEDFROMHERE_CH0_PAUSE_MAC BIT(3)
+#define NEWADDEDFROMHERE_CH0_ASYM_PAUSE_MAC BIT(2)
+#define NEWADDEDFROMHERE_CH0_TX_PAUSE_EN_MAC BIT(1)
+#define NEWADDEDFROMHERE_CH0_RX_PAUSE_EN_MAC BIT(0)
+#define UNIPHY_SPEED_10M 0
+#define UNIPHY_SPEED_100M 1
+#define UNIPHY_SPEED_1000M 2
+
+/* [register] UNIPHY_INSTANCE_LINK_DETECT */
+#define UNIPHY_LINK_DETECT_ADDR 0x570
+#define DETECT_LOS_FROM_SFP GENMASK(8, 6)
+#define UNIPHY_10GR_LINK_LOSS (FIELD_PREP(DETECT_LOS_FROM_SFP, 0x7))
+
+/* [register] UNIPHY_QP_USXG_OPITON1 */
+#define UNIPHY_QP_USXG_OPITON1_ADDR 0x584
+#define GMII_SRC_SEL BIT(0)
+
+/* [register] UNIPHY_OFFSET_CALIB_4 */
+#define UNIPHY_OFFSET_CALIB_4_ADDR 0x1e0
+#define MMD1_REG_CALIBRATION_DONE_REG BIT(7)
+#define UNIPHY_CALIBRATION_DONE 0x1
+
+/* [register] UNIPHY_PLL_RESET */
+#define UNIPHY_PLL_RESET_ADDR 0x780
+#define UPHY_ANA_EN_SW_RSTN BIT(6)
+
+/* [register] SR_XS_PCS_KR_STS1 */
+#define SR_XS_PCS_KR_STS1_ADDR 0x30020
+#define SR_XS_PCS_KR_STS1_PLU BIT(12)
+
+/* [register] VR_XS_PCS_DIG_CTRL1 */
+#define VR_XS_PCS_DIG_CTRL1_ADDR 0x38000
+#define USXGMII_EN BIT(9)
+#define USRA_RST BIT(10)
+#define VR_RST BIT(15)
+
+/* [register] VR_XS_PCS_EEE_MCTRL0 */
+#define VR_XS_PCS_EEE_MCTRL0_ADDR 0x38006
+#define LTX_EN BIT(0)
+#define LRX_EN BIT(1)
+#define SIGN_BIT BIT(6)
+#define MULT_FACT_100NS GENMASK(11, 8)
+
+/* [register] VR_XS_PCS_KR_CTRL */
+#define VR_XS_PCS_KR_CTRL_ADDR 0x38007
+#define USXG_MODE GENMASK(12, 10)
+#define QUXGMII_MODE (FIELD_PREP(USXG_MODE, 0x5))
+
+/* [register] VR_XS_PCS_EEE_TXTIMER */
+#define VR_XS_PCS_EEE_TXTIMER_ADDR 0x38008
+#define TSL_RES GENMASK(5, 0)
+#define T1U_RES GENMASK(7, 6)
+#define TWL_RES GENMASK(12, 8)
+#define UNIPHY_XPCS_TSL_TIMER (FIELD_PREP(TSL_RES, 0xa))
+#define UNIPHY_XPCS_T1U_TIMER (FIELD_PREP(TSL_RES, 0x3))
+#define UNIPHY_XPCS_TWL_TIMER (FIELD_PREP(TSL_RES, 0x16))
+
+/* [register] VR_XS_PCS_EEE_RXTIMER */
+#define VR_XS_PCS_EEE_RXTIMER_ADDR 0x38009
+#define RES_100U GENMASK(7, 0)
+#define TWR_RES GENMASK(13, 8)
+#define UNIPHY_XPCS_100US_TIMER (FIELD_PREP(RES_100U, 0xc8))
+#define UNIPHY_XPCS_TWR_TIMER (FIELD_PREP(RES_100U, 0x1c))
+
+/* [register] VR_XS_PCS_DIG_STS */
+#define VR_XS_PCS_DIG_STS_ADDR 0x3800a
+#define AM_COUNT GENMASK(14, 0)
+#define QUXGMII_AM_COUNT (FIELD_PREP(AM_COUNT, 0x6018))
+
+/* [register] VR_XS_PCS_EEE_MCTRL1 */
+#define VR_XS_PCS_EEE_MCTRL1_ADDR 0x3800b
+#define TRN_LPI BIT(0)
+#define TRN_RXLPI BIT(8)
+
+/* [register] VR_MII_1_DIG_CTRL1 */
+#define VR_MII_DIG_CTRL1_CHANNEL1_ADDR 0x1a8000
+#define VR_MII_DIG_CTRL1_CHANNEL2_ADDR 0x1b8000
+#define VR_MII_DIG_CTRL1_CHANNEL3_ADDR 0x1c8000
+#define VR_MII_DIG_CTRL1_CHANNEL_ADDR(x) (0x1a8000 + 0x10000 * ((x) - 1))
+#define CHANNEL_USRA_RST BIT(5)
+
+/* [register] VR_MII_AN_CTRL */
+#define VR_MII_AN_CTRL_ADDR 0x1f8001
+#define VR_MII_AN_CTRL_CHANNEL1_ADDR 0x1a8001
+#define VR_MII_AN_CTRL_CHANNEL2_ADDR 0x1b8001
+#define VR_MII_AN_CTRL_CHANNEL3_ADDR 0x1c8001
+#define VR_MII_AN_CTRL_CHANNEL_ADDR(x) (0x1a8001 + 0x10000 * ((x) - 1))
+#define MII_AN_INTR_EN BIT(0)
+#define MII_CTRL BIT(8)
+
+/* [register] VR_MII_AN_INTR_STS */
+#define VR_MII_AN_INTR_STS_ADDR 0x1f8002
+#define VR_MII_AN_INTR_STS_CHANNEL1_ADDR 0x1a8002
+#define VR_MII_AN_INTR_STS_CHANNEL2_ADDR 0x1b8002
+#define VR_MII_AN_INTR_STS_CHANNEL3_ADDR 0x1c8002
+#define VR_MII_AN_INTR_STS_CHANNEL_ADDR(x) (0x1a8002 + 0x10000 * ((x) - 1))
+#define CL37_ANCMPLT_INTR BIT(0)
+
+/* [register] VR_XAUI_MODE_CTRL */
+#define VR_XAUI_MODE_CTRL_ADDR 0x1f8004
+#define VR_XAUI_MODE_CTRL_CHANNEL1_ADDR 0x1a8004
+#define VR_XAUI_MODE_CTRL_CHANNEL2_ADDR 0x1b8004
+#define VR_XAUI_MODE_CTRL_CHANNEL3_ADDR 0x1c8004
+#define VR_XAUI_MODE_CTRL_CHANNEL_ADDR(x) (0x1a8004 + 0x10000 * ((x) - 1))
+#define IPG_CHECK BIT(0)
+
+/* [register] SR_MII_CTRL */
+#define SR_MII_CTRL_ADDR 0x1f0000
+#define SR_MII_CTRL_CHANNEL1_ADDR 0x1a0000
+#define SR_MII_CTRL_CHANNEL2_ADDR 0x1b0000
+#define SR_MII_CTRL_CHANNEL3_ADDR 0x1c0000
+#define SR_MII_CTRL_CHANNEL_ADDR(x) (0x1a0000 + 0x10000 * ((x) - 1))
+#define AN_ENABLE BIT(12)
+#define USXGMII_DUPLEX_FULL BIT(8)
+#define USXGMII_SPEED_MASK (BIT(13) | BIT(6) | BIT(5))
+#define USXGMII_SPEED_10000 (BIT(13) | BIT(6))
+#define USXGMII_SPEED_5000 (BIT(13) | BIT(5))
+#define USXGMII_SPEED_2500 BIT(5)
+#define USXGMII_SPEED_1000 BIT(6)
+#define USXGMII_SPEED_100 BIT(13)
+#define USXGMII_SPEED_10 0
+
+/* PPE UNIPHY data type */
+struct ppe_uniphy {
+ void __iomem *base;
+ struct ppe_device *ppe_dev;
+ unsigned int index;
+ phy_interface_t interface;
+ struct phylink_pcs pcs;
+};
+
+#define pcs_to_ppe_uniphy(_pcs) container_of(_pcs, struct ppe_uniphy, pcs)
+
+struct ppe_uniphy *ppe_uniphy_setup(struct platform_device *pdev);
+
+int ppe_uniphy_speed_set(struct ppe_uniphy *uniphy,
+ int port, int speed);
+
+int ppe_uniphy_duplex_set(struct ppe_uniphy *uniphy,
+ int port, int duplex);
+
+int ppe_uniphy_adapter_reset(struct ppe_uniphy *uniphy,
+ int port);
+
+int ppe_uniphy_autoneg_complete_check(struct ppe_uniphy *uniphy,
+ int port);
+
+int ppe_uniphy_port_gcc_clock_en_set(struct ppe_uniphy *uniphy,
+ int port, bool enable);
+
+#endif /* _PPE_UNIPHY_H_ */
@@ -20,6 +20,7 @@ struct ppe_device {
struct dentry *debugfs_root;
bool is_ppe_probed;
void *ppe_priv;
+ void *uniphy;
};
/* PPE operations, which is used by the external driver like Ethernet