[v2,net-next,4/7] net: phy: realtek: Change rtlgen_get_speed() to rtlgen_decode_speed()

Commit Message

Eric Woudstra March 3, 2024, 10:28 a.m. UTC

The value of the register to determine the speed, is retrieved
differently when using Clause 45 only. To use the rtlgen_get_speed()
function in this case, pass the value of the register as argument to
rtlgen_get_speed(). The function would then always return 0, so change it
to void. A better name for this function now is rtlgen_decode_speed().

Add reading speed to rtl822x_c45_read_status().

Signed-off-by: Eric Woudstra <[e-mail]>
---
 drivers/net/phy/realtek.c | 38 ++++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 14 deletions(-)

Patch

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index f9a67761878e..6449d8e0842c 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -71,6 +71,8 @@ 
 
 #define RTL822X_VND2_GANLPAR				0xa414
 
+#define RTL822X_VND2_PHYSR				0xa434
+
 #define RTL8366RB_POWER_SAVE			0x15
 #define RTL8366RB_POWER_SAVE_ON			BIT(12)
 
@@ -551,17 +553,8 @@  static int rtl8366rb_config_init(struct phy_device *phydev)
 }
 
 /* get actual speed to cover the downshift case */
-static int rtlgen_get_speed(struct phy_device *phydev)
+static void rtlgen_decode_speed(struct phy_device *phydev, int val)
 {
-	int val;
-
-	if (!phydev->link)
-		return 0;
-
-	val = phy_read_paged(phydev, 0xa43, 0x12);
-	if (val < 0)
-		return val;
-
 	switch (val & RTLGEN_SPEED_MASK) {
 	case 0x0000:
 		phydev->speed = SPEED_10;
@@ -584,19 +577,26 @@  static int rtlgen_get_speed(struct phy_device *phydev)
 	default:
 		break;
 	}
-
-	return 0;
 }
 
 static int rtlgen_read_status(struct phy_device *phydev)
 {
-	int ret;
+	int ret, val;
 
 	ret = genphy_read_status(phydev);
 	if (ret < 0)
 		return ret;
 
-	return rtlgen_get_speed(phydev);
+	if (!phydev->link)
+		return 0;
+
+	val = phy_read_paged(phydev, 0xa43, 0x12);
+	if (val < 0)
+		return val;
+
+	rtlgen_decode_speed(phydev, val);
+
+	return 0;
 }
 
 static int rtlgen_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
@@ -881,6 +881,16 @@  static int rtl822x_c45_read_status(struct phy_device *phydev)
 		mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, val);
 	}
 
+	if (!phydev->link)
+		return 0;
+
+	/* Read actual speed from vendor register. */
+	val = phy_read_mmd(phydev, MDIO_MMD_VEND2, RTL822X_VND2_PHYSR);
+	if (val < 0)
+		return val;
+
+	rtlgen_decode_speed(phydev, val);
+
 	rtl822x_update_interface(phydev);
 
 	return 0;