| Message ID | 20240325131624.26023-2-brgl@bgdev.pl (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | power: sequencing: implement the subsystem and add first users | expand |
On Mon, Mar 25, 2024 at 02:16:09PM +0100, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > The QCA6390 package contains discreet modules for WLAN and Bluetooth. They > are powered by the Power Management Unit (PMU) that takes inputs from the > host and provides LDO outputs. This document describes this module. Acked-by: Mark Brown <broonie@kernel.org>
On 25/03/2024 14:16, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > The QCA6390 package contains discreet modules for WLAN and Bluetooth. They > are powered by the Power Management Unit (PMU) that takes inputs from the > host and provides LDO outputs. This document describes this module. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Can you start using b4? This is a friendly reminder during the review process. It looks like you received a tag and forgot to add it. If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply. https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577 If a tag was not added on purpose, please state why and what changed. Best regards, Krzysztof
On Wed, Mar 27, 2024 at 7:17 PM Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 25/03/2024 14:16, Bartosz Golaszewski wrote: > > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > > > The QCA6390 package contains discreet modules for WLAN and Bluetooth. They > > are powered by the Power Management Unit (PMU) that takes inputs from the > > host and provides LDO outputs. This document describes this module. > > > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Can you start using b4? > > This is a friendly reminder during the review process. > > It looks like you received a tag and forgot to add it. > > If you do not know the process, here is a short explanation: > Please add Acked-by/Reviewed-by/Tested-by tags when posting new > versions, under or above your Signed-off-by tag. Tag is "received", when > provided in a message replied to you on the mailing list. Tools like b4 > can help here. However, there's no need to repost patches *only* to add > the tags. The upstream maintainer will do that for tags received on the > version they apply. > > https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577 > > If a tag was not added on purpose, please state why and what changed. > As per the first sentence of the cover letter: I dropped review tags from the patches that changed significantly while keeping them for those that didn't. If there's a way to let your automation know about this, please let me know/point me in the right direction because I don't know about it. Bart
On 27/03/2024 19:55, Bartosz Golaszewski wrote: > On Wed, Mar 27, 2024 at 7:17 PM Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> wrote: >> >> On 25/03/2024 14:16, Bartosz Golaszewski wrote: >>> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> >>> >>> The QCA6390 package contains discreet modules for WLAN and Bluetooth. They >>> are powered by the Power Management Unit (PMU) that takes inputs from the >>> host and provides LDO outputs. This document describes this module. >>> >>> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> >> >> Can you start using b4? >> >> This is a friendly reminder during the review process. >> >> It looks like you received a tag and forgot to add it. >> >> If you do not know the process, here is a short explanation: >> Please add Acked-by/Reviewed-by/Tested-by tags when posting new >> versions, under or above your Signed-off-by tag. Tag is "received", when >> provided in a message replied to you on the mailing list. Tools like b4 >> can help here. However, there's no need to repost patches *only* to add >> the tags. The upstream maintainer will do that for tags received on the >> version they apply. >> >> https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577 >> >> If a tag was not added on purpose, please state why and what changed. >> > > As per the first sentence of the cover letter: I dropped review tags > from the patches that changed significantly while keeping them for > those that didn't. If there's a way to let your automation know about > this, please let me know/point me in the right direction because I > don't know about it. > I went through changelog and did not see any remarks that patch #1 changed. b4 diff tells me: not much changed. Same properties and you just do not require supplies on other variant. This is rather minor change - just see by yourself. Best regards, Krzysztof
On 25/03/2024 14:16, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > The QCA6390 package contains discreet modules for WLAN and Bluetooth. They > are powered by the Power Management Unit (PMU) that takes inputs from the > host and provides LDO outputs. This document describes this module. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml new file mode 100644 index 000000000000..9d39ff9a75fd --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/qcom,qca6390-pmu.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QCA6390 PMU Regulators + +maintainers: + - Bartosz Golaszewski <bartosz.golaszewski@linaro.org> + +description: + The QCA6390 package contains discreet modules for WLAN and Bluetooth. They + are powered by the Power Management Unit (PMU) that takes inputs from the + host and provides LDO outputs. This document describes this module. + +properties: + compatible: + const: qcom,qca6390-pmu + + vddaon-supply: + description: VDD_AON supply regulator handle + + vddpmu-supply: + description: VDD_PMU supply regulator handle + + vddrfa0p95-supply: + description: VDD_RFA_0P95 supply regulator handle + + vddrfa1p3-supply: + description: VDD_RFA_1P3 supply regulator handle + + vddrfa1p9-supply: + description: VDD_RFA_1P9 supply regulator handle + + vddpcie1p3-supply: + description: VDD_PCIE_1P3 supply regulator handle<S-Del> + + vddpcie1p9-supply: + description: VDD_PCIE_1P9 supply regulator handle + + vddio-supply: + description: VDD_IO supply regulator handle + + wlan-enable-gpios: + maxItems: 1 + description: GPIO line enabling the ATH11K WLAN module supplied by the PMU + + bt-enable-gpios: + maxItems: 1 + description: GPIO line enabling the ATH11K Bluetooth module supplied by the PMU + + regulators: + type: object + description: + LDO outputs of the PMU + + patternProperties: + "^ldo[0-9]$": + $ref: regulator.yaml# + type: object + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - regulators + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,qca6390-pmu + then: + required: + - vddaon-supply + - vddpmu-supply + - vddrfa0p95-supply + - vddrfa1p3-supply + - vddrfa1p9-supply + - vddpcie1p3-supply + - vddpcie1p9-supply + - vddio-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + pmu { + compatible = "qcom,qca6390-pmu"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>, <&wlan_en_state>; + + vddaon-supply = <&vreg_s6a_0p95>; + vddpmu-supply = <&vreg_s2f_0p95>; + vddrfa0p95-supply = <&vreg_s2f_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p3>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + vddpcie1p3-supply = <&vreg_s8c_1p3>; + vddpcie1p9-supply = <&vreg_s5a_1p9>; + vddio-supply = <&vreg_s4a_1p8>; + + wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + };