diff mbox series

[v3] net: phy: marvell-88q2xxx: add support for Rev B1 and B2

Message ID 20240506-mv88q222x-revb1-b2-init-v3-1-6fa407c2e0bc@ew.tq-group.com (mailing list archive)
State Accepted
Commit ab0cde321adc96a755caf39eb0e90d61511ec6c4
Delegated to: Netdev Maintainers
Headers show
Series [v3] net: phy: marvell-88q2xxx: add support for Rev B1 and B2 | expand

Checks

Context Check Description
netdev/series_format warning Single patches do not need cover letters; Target tree name not specified in the subject
netdev/tree_selection success Guessed tree name to be net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 926 this patch: 926
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 937 this patch: 937
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 937 this patch: 937
netdev/checkpatch warning WARNING: line length of 81 exceeds 80 columns WARNING: line length of 84 exceeds 80 columns WARNING: line length of 86 exceeds 80 columns WARNING: line length of 93 exceeds 80 columns
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-05-08--03-00 (tests: 1005)

Commit Message

Gregor Herburger May 6, 2024, 6:24 a.m. UTC 
Different revisions of the Marvell 88q2xxx phy needs different init
sequences.

Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one
register write.

Tested-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
---
Hi,

as discussed when adding support for Marvell 88Q2220 Revision B0 [1],
newer revisions need different init sequences. So add support for Rev B1
and B2 with this patch.

[1] https://lore.kernel.org/netdev/20240216205302.GC3873@debian/

Best regards
Gregor
---
Changes in v3:
- change hex values to lower case
- Collect Tested-by
- Link to v2: https://lore.kernel.org/r/20240417-mv88q222x-revb1-b2-init-v2-1-7ef41f87722a@ew.tq-group.com

Changes in v2:
- Add helper function to write phy mmd sequences
- Link to v1: https://lore.kernel.org/r/20240403-mv88q222x-revb1-b2-init-v1-1-48b855464c37@ew.tq-group.com
---
 drivers/net/phy/marvell-88q2xxx.c | 119 +++++++++++++++++++++++++++++++++-----
 1 file changed, 103 insertions(+), 16 deletions(-)


---
base-commit: 1fdad13606e104ff103ca19d2d660830cb36d43e
change-id: 20240403-mv88q222x-revb1-b2-init-9961d2cf1d27

Best regards,

Comments

patchwork-bot+netdevbpf@kernel.org May 8, 2024, 11:20 a.m. UTC | #1 
Hello:

This patch was applied to netdev/net.git (main)
by David S. Miller <davem@davemloft.net>:

On Mon, 06 May 2024 08:24:33 +0200 you wrote:
> Different revisions of the Marvell 88q2xxx phy needs different init
> sequences.
> 
> Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one
> register write.
> 
> Tested-by: Dimitri Fedrau <dima.fedrau@gmail.com>
> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
> 
> [...]

Here is the summary with links:
  - [v3] net: phy: marvell-88q2xxx: add support for Rev B1 and B2
    https://git.kernel.org/netdev/net/c/ab0cde321adc

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 6b4bd9883304..c812f16eaa3a 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -12,6 +12,8 @@ 
 #include <linux/hwmon.h>
 
 #define PHY_ID_88Q2220_REVB0	(MARVELL_PHY_ID_88Q2220 | 0x1)
+#define PHY_ID_88Q2220_REVB1	(MARVELL_PHY_ID_88Q2220 | 0x2)
+#define PHY_ID_88Q2220_REVB2	(MARVELL_PHY_ID_88Q2220 | 0x3)
 
 #define MDIO_MMD_AN_MV_STAT			32769
 #define MDIO_MMD_AN_MV_STAT_ANEG		0x0100
@@ -129,6 +131,49 @@  static const struct mmd_val mv88q222x_revb0_init_seq1[] = {
 	{ MDIO_MMD_PCS, 0xfe05, 0x755c },
 };
 
+static const struct mmd_val mv88q222x_revb1_init_seq0[] = {
+	{ MDIO_MMD_PCS, 0xffe4, 0x0007 },
+	{ MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 },
+	{ MDIO_MMD_PCS, 0xffe3, 0x7000 },
+	{ MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0840 },
+};
+
+static const struct mmd_val mv88q222x_revb2_init_seq0[] = {
+	{ MDIO_MMD_PCS, 0xffe4, 0x0007 },
+	{ MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 },
+	{ MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0840 },
+};
+
+static const struct mmd_val mv88q222x_revb1_revb2_init_seq1[] = {
+	{ MDIO_MMD_PCS, 0xfe07, 0x125a },
+	{ MDIO_MMD_PCS, 0xfe09, 0x1288 },
+	{ MDIO_MMD_PCS, 0xfe08, 0x2588 },
+	{ MDIO_MMD_PCS, 0xfe72, 0x042c },
+	{ MDIO_MMD_PCS, 0xffe4, 0x0071 },
+	{ MDIO_MMD_PCS, 0xffe4, 0x0001 },
+	{ MDIO_MMD_PCS, 0xfe1b, 0x0048 },
+	{ MDIO_MMD_PMAPMD, 0x0000, 0x0000 },
+	{ MDIO_MMD_PCS, 0x0000, 0x0000 },
+	{ MDIO_MMD_PCS, 0xffdb, 0xfc10 },
+	{ MDIO_MMD_PCS, 0xfe1b, 0x58 },
+	{ MDIO_MMD_PCS, 0xfcad, 0x030c },
+	{ MDIO_MMD_PCS, 0x8032, 0x6001 },
+	{ MDIO_MMD_PCS, 0xfdff, 0x05a5 },
+	{ MDIO_MMD_PCS, 0xfdec, 0xdbaf },
+	{ MDIO_MMD_PCS, 0xfcab, 0x1054 },
+	{ MDIO_MMD_PCS, 0xfcac, 0x1483 },
+	{ MDIO_MMD_PCS, 0x8033, 0xc801 },
+	{ MDIO_MMD_AN, 0x8032, 0x2020 },
+	{ MDIO_MMD_AN, 0x8031, 0xa28 },
+	{ MDIO_MMD_AN, 0x8031, 0xc28 },
+	{ MDIO_MMD_PCS, 0xfbba, 0x0cb2 },
+	{ MDIO_MMD_PCS, 0xfbbb, 0x0c4a },
+	{ MDIO_MMD_PCS, 0xfe5f, 0xe8 },
+	{ MDIO_MMD_PCS, 0xfe05, 0x755c },
+	{ MDIO_MMD_PCS, 0xfa20, 0x002a },
+	{ MDIO_MMD_PCS, 0xfe11, 0x1105 },
+};
+
 static int mv88q2xxx_soft_reset(struct phy_device *phydev)
 {
 	int ret;
@@ -687,31 +732,72 @@  static int mv88q222x_soft_reset(struct phy_device *phydev)
 	return 0;
 }
 
-static int mv88q222x_revb0_config_init(struct phy_device *phydev)
+static int mv88q222x_write_mmd_vals(struct phy_device *phydev,
+				    const struct mmd_val *vals, size_t len)
 {
-	int ret, i;
+	int ret;
 
-	for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq0); i++) {
-		ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq0[i].devad,
-				    mv88q222x_revb0_init_seq0[i].regnum,
-				    mv88q222x_revb0_init_seq0[i].val);
+	for (; len; vals++, len--) {
+		ret = phy_write_mmd(phydev, vals->devad, vals->regnum,
+				    vals->val);
 		if (ret < 0)
 			return ret;
 	}
 
+	return 0;
+}
+
+static int mv88q222x_revb0_config_init(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq0,
+				       ARRAY_SIZE(mv88q222x_revb0_init_seq0));
+	if (ret < 0)
+		return ret;
+
 	usleep_range(5000, 10000);
 
-	for (i = 0; i < ARRAY_SIZE(mv88q222x_revb0_init_seq1); i++) {
-		ret = phy_write_mmd(phydev, mv88q222x_revb0_init_seq1[i].devad,
-				    mv88q222x_revb0_init_seq1[i].regnum,
-				    mv88q222x_revb0_init_seq1[i].val);
-		if (ret < 0)
-			return ret;
-	}
+	ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq1,
+				       ARRAY_SIZE(mv88q222x_revb0_init_seq1));
+	if (ret < 0)
+		return ret;
 
 	return mv88q2xxx_config_init(phydev);
 }
 
+static int mv88q222x_revb1_revb2_config_init(struct phy_device *phydev)
+{
+	bool is_rev_b1 = phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB1;
+	int ret;
+
+	if (is_rev_b1)
+		ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_init_seq0,
+					       ARRAY_SIZE(mv88q222x_revb1_init_seq0));
+	else
+		ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb2_init_seq0,
+					       ARRAY_SIZE(mv88q222x_revb2_init_seq0));
+	if (ret < 0)
+		return ret;
+
+	usleep_range(3000, 5000);
+
+	ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_revb2_init_seq1,
+				       ARRAY_SIZE(mv88q222x_revb1_revb2_init_seq1));
+	if (ret < 0)
+		return ret;
+
+	return mv88q2xxx_config_init(phydev);
+}
+
+static int mv88q222x_config_init(struct phy_device *phydev)
+{
+	if (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB0)
+		return mv88q222x_revb0_config_init(phydev);
+	else
+		return mv88q222x_revb1_revb2_config_init(phydev);
+}
+
 static int mv88q222x_cable_test_start(struct phy_device *phydev)
 {
 	int ret;
@@ -810,14 +896,15 @@  static struct phy_driver mv88q2xxx_driver[] = {
 		.get_sqi_max		= mv88q2xxx_get_sqi_max,
 	},
 	{
-		PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0),
+		.phy_id			= MARVELL_PHY_ID_88Q2220,
+		.phy_id_mask		= MARVELL_PHY_ID_MASK,
 		.name			= "mv88q2220",
 		.flags			= PHY_POLL_CABLE_TEST,
 		.probe			= mv88q2xxx_probe,
 		.get_features		= mv88q2xxx_get_features,
 		.config_aneg		= mv88q2xxx_config_aneg,
 		.aneg_done		= genphy_c45_aneg_done,
-		.config_init		= mv88q222x_revb0_config_init,
+		.config_init		= mv88q222x_config_init,
 		.read_status		= mv88q2xxx_read_status,
 		.soft_reset		= mv88q222x_soft_reset,
 		.config_intr		= mv88q2xxx_config_intr,
@@ -836,7 +923,7 @@  module_phy_driver(mv88q2xxx_driver);
 
 static struct mdio_device_id __maybe_unused mv88q2xxx_tbl[] = {
 	{ MARVELL_PHY_ID_88Q2110, MARVELL_PHY_ID_MASK },
-	{ PHY_ID_MATCH_EXACT(PHY_ID_88Q2220_REVB0), },
+	{ MARVELL_PHY_ID_88Q2220, MARVELL_PHY_ID_MASK },
 	{ /*sentinel*/ }
 };
 MODULE_DEVICE_TABLE(mdio, mv88q2xxx_tbl);