@@ -14,5 +14,6 @@ rvu_nicvf-y := otx2_vf.o otx2_devlink.o
rvu_nicpf-$(CONFIG_DCB) += otx2_dcbnl.o
rvu_nicvf-$(CONFIG_DCB) += otx2_dcbnl.o
rvu_nicpf-$(CONFIG_MACSEC) += cn10k_macsec.o
+rvu_nicpf-$(CONFIG_XFRM_OFFLOAD) += cn10k_ipsec.o
ccflags-y += -I$(srctree)/drivers/net/ethernet/marvell/octeontx2/af
new file mode 100644
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell IPSEC offload driver
+ *
+ * Copyright (C) 2024 Marvell.
+ */
+
+#include <net/xfrm.h>
+#include <linux/netdevice.h>
+#include <linux/bitfield.h>
+
+#include "otx2_common.h"
+#include "cn10k_ipsec.h"
+
+static bool is_dev_support_inline_ipsec(struct pci_dev *pdev)
+{
+ return is_dev_cn10ka_b0(pdev) || is_dev_cn10kb(pdev);
+}
+
+static int cn10k_outb_cptlf_attach(struct otx2_nic *pf)
+{
+ struct rsrc_attach *attach;
+ int err;
+
+ mutex_lock(&pf->mbox.lock);
+ /* Get memory to put this msg */
+ attach = otx2_mbox_alloc_msg_attach_resources(&pf->mbox);
+ if (!attach) {
+ mutex_unlock(&pf->mbox.lock);
+ return -ENOMEM;
+ }
+
+ attach->cptlfs = true;
+ attach->modify = true;
+
+ /* Send attach request to AF */
+ err = otx2_sync_mbox_msg(&pf->mbox);
+ if (err) {
+ mutex_unlock(&pf->mbox.lock);
+ return err;
+ }
+
+ mutex_unlock(&pf->mbox.lock);
+ return 0;
+}
+
+static int cn10k_outb_cptlf_detach(struct otx2_nic *pf)
+{
+ struct rsrc_detach *detach;
+
+ mutex_lock(&pf->mbox.lock);
+ detach = otx2_mbox_alloc_msg_detach_resources(&pf->mbox);
+ if (!detach) {
+ mutex_unlock(&pf->mbox.lock);
+ return -ENOMEM;
+ }
+
+ detach->partial = true;
+ detach->cptlfs = true;
+
+ /* Send detach request to AF */
+ otx2_sync_mbox_msg(&pf->mbox);
+ mutex_unlock(&pf->mbox.lock);
+ return 0;
+}
+
+static int cn10k_outb_cptlf_alloc(struct otx2_nic *pf)
+{
+ struct cpt_lf_alloc_req_msg *req;
+ int ret = 0;
+
+ mutex_lock(&pf->mbox.lock);
+ req = otx2_mbox_alloc_msg_cpt_lf_alloc(&pf->mbox);
+ if (!req) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ /* PF function */
+ req->nix_pf_func = pf->pcifunc;
+ /* Enable SE-IE Engine Group */
+ req->eng_grpmsk = 1 << CN10K_DEF_CPT_IPSEC_EGRP;
+
+ ret = otx2_sync_mbox_msg(&pf->mbox);
+
+error:
+ mutex_unlock(&pf->mbox.lock);
+ return ret;
+}
+
+static void cn10k_outb_cptlf_free(struct otx2_nic *pf)
+{
+ mutex_lock(&pf->mbox.lock);
+ otx2_mbox_alloc_msg_cpt_lf_free(&pf->mbox);
+ otx2_sync_mbox_msg(&pf->mbox);
+ mutex_unlock(&pf->mbox.lock);
+}
+
+static int cn10k_outb_cptlf_config(struct otx2_nic *pf)
+{
+ struct cpt_inline_ipsec_cfg_msg *req;
+ int ret = 0;
+
+ mutex_lock(&pf->mbox.lock);
+ req = otx2_mbox_alloc_msg_cpt_inline_ipsec_cfg(&pf->mbox);
+ if (!req) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ req->dir = CPT_INLINE_OUTBOUND;
+ req->enable = 1;
+ req->nix_pf_func = pf->pcifunc;
+ ret = otx2_sync_mbox_msg(&pf->mbox);
+error:
+ mutex_unlock(&pf->mbox.lock);
+ return ret;
+}
+
+static void cn10k_outb_cptlf_iq_enable(struct otx2_nic *pf)
+{
+ u64 reg_val;
+
+ /* Set Execution Enable of instruction queue */
+ reg_val = otx2_read64(pf, CN10K_CPT_LF_INPROG);
+ reg_val |= BIT_ULL(16);
+ otx2_write64(pf, CN10K_CPT_LF_INPROG, reg_val);
+
+ /* Set iqueue's enqueuing */
+ reg_val = otx2_read64(pf, CN10K_CPT_LF_CTL);
+ reg_val |= BIT_ULL(0);
+ otx2_write64(pf, CN10K_CPT_LF_CTL, reg_val);
+}
+
+static inline void cn10k_outb_cptlf_iq_disable(struct otx2_nic *pf)
+{
+ u32 inflight, grb_cnt, gwb_cnt;
+ u32 nq_ptr, dq_ptr;
+ int timeout = 20;
+ u64 reg_val;
+ int cnt;
+
+ /* Disable instructions enqueuing */
+ otx2_write64(pf, CN10K_CPT_LF_CTL, 0ull);
+
+ /* Wait for instruction queue to become empty.
+ * CPT_LF_INPROG.INFLIGHT count is zero
+ */
+ do {
+ reg_val = otx2_read64(pf, CN10K_CPT_LF_INPROG);
+ inflight = FIELD_GET(CPT_LF_INPROG_INFLIGHT, reg_val);
+ if (!inflight)
+ break;
+
+ usleep_range(10000, 20000);
+ if (timeout-- < 0) {
+ dev_err(pf->dev, "Error CPT LF is still busy\n");
+ break;
+ }
+ } while (1);
+
+ /* Disable executions in the LF's queue,
+ * the queue should be empty at this point
+ */
+ reg_val &= ~BIT_ULL(16);
+ otx2_write64(pf, CN10K_CPT_LF_INPROG, reg_val);
+
+ /* Wait for instruction queue to become empty */
+ cnt = 0;
+ do {
+ reg_val = otx2_read64(pf, CN10K_CPT_LF_INPROG);
+ if (reg_val & BIT_ULL(31))
+ cnt = 0;
+ else
+ cnt++;
+ reg_val = otx2_read64(pf, CN10K_CPT_LF_Q_GRP_PTR);
+ nq_ptr = FIELD_GET(CPT_LF_Q_GRP_PTR_DQ_PTR, reg_val);
+ dq_ptr = FIELD_GET(CPT_LF_Q_GRP_PTR_DQ_PTR, reg_val);
+ } while ((cnt < 10) && (nq_ptr != dq_ptr));
+
+ cnt = 0;
+ do {
+ reg_val = otx2_read64(pf, CN10K_CPT_LF_INPROG);
+ inflight = FIELD_GET(CPT_LF_INPROG_INFLIGHT, reg_val);
+ grb_cnt = FIELD_GET(CPT_LF_INPROG_GRB_CNT, reg_val);
+ gwb_cnt = FIELD_GET(CPT_LF_INPROG_GWB_CNT, reg_val);
+ if (inflight == 0 && gwb_cnt < 40 &&
+ (grb_cnt == 0 || grb_cnt == 40))
+ cnt++;
+ else
+ cnt = 0;
+ } while (cnt < 10);
+}
+
+/* Allocate memory for CPT outbound Instruction queue.
+ * Instruction queue memory format is:
+ * -----------------------------
+ * | Instruction Group memory |
+ * | (CPT_LF_Q_SIZE[SIZE_DIV40] |
+ * | x 16 Bytes) |
+ * | |
+ * ----------------------------- <-- CPT_LF_Q_BASE[ADDR]
+ * | Flow Control (128 Bytes) |
+ * | |
+ * -----------------------------
+ * | Instruction Memory |
+ * | (CPT_LF_Q_SIZE[SIZE_DIV40] |
+ * | × 40 × 64 bytes) |
+ * | |
+ * -----------------------------
+ */
+static int cn10k_outb_cptlf_iq_alloc(struct otx2_nic *pf)
+{
+ struct cn10k_cpt_inst_queue *iq = &pf->ipsec.iq;
+
+ iq->size = CN10K_CPT_INST_QLEN_BYTES + CN10K_CPT_Q_FC_LEN +
+ CN10K_CPT_INST_GRP_QLEN_BYTES + OTX2_ALIGN;
+
+ iq->real_vaddr = dma_alloc_coherent(pf->dev, iq->size,
+ &iq->real_dma_addr, GFP_KERNEL);
+ if (!iq->real_vaddr)
+ return -ENOMEM;
+
+ /* iq->vaddr/dma_addr points to Flow Control location */
+ iq->vaddr = iq->real_vaddr + CN10K_CPT_INST_GRP_QLEN_BYTES;
+ iq->dma_addr = iq->real_dma_addr + CN10K_CPT_INST_GRP_QLEN_BYTES;
+
+ /* Align pointers */
+ iq->vaddr = PTR_ALIGN(iq->vaddr, OTX2_ALIGN);
+ iq->dma_addr = PTR_ALIGN(iq->dma_addr, OTX2_ALIGN);
+ return 0;
+}
+
+static void cn10k_outb_cptlf_iq_free(struct otx2_nic *pf)
+{
+ struct cn10k_cpt_inst_queue *iq = &pf->ipsec.iq;
+
+ if (!iq->real_vaddr)
+ dma_free_coherent(pf->dev, iq->size, iq->real_vaddr,
+ iq->real_dma_addr);
+
+ iq->real_vaddr = NULL;
+ iq->vaddr = NULL;
+}
+
+static int cn10k_outb_cptlf_iq_init(struct otx2_nic *pf)
+{
+ u64 reg_val;
+ int ret;
+
+ /* Allocate Memory for CPT IQ */
+ ret = cn10k_outb_cptlf_iq_alloc(pf);
+ if (ret)
+ return ret;
+
+ /* Disable IQ */
+ cn10k_outb_cptlf_iq_disable(pf);
+
+ /* Set IQ base address */
+ otx2_write64(pf, CN10K_CPT_LF_Q_BASE, pf->ipsec.iq.dma_addr);
+
+ /* Set IQ size */
+ reg_val = FIELD_PREP(CPT_LF_Q_SIZE_DIV40, CN10K_CPT_SIZE_DIV40 +
+ CN10K_CPT_EXTRA_SIZE_DIV40);
+ otx2_write64(pf, CN10K_CPT_LF_Q_SIZE, reg_val);
+
+ return 0;
+}
+
+static int cn10k_outb_cptlf_init(struct otx2_nic *pf)
+{
+ int ret = 0;
+
+ /* Initialize CPTLF Instruction Queue (IQ) */
+ ret = cn10k_outb_cptlf_iq_init(pf);
+ if (ret)
+ return ret;
+
+ /* Configure CPTLF for outbound inline ipsec */
+ ret = cn10k_outb_cptlf_config(pf);
+ if (ret)
+ goto iq_clean;
+
+ /* Enable CPTLF IQ */
+ cn10k_outb_cptlf_iq_enable(pf);
+ return 0;
+iq_clean:
+ cn10k_outb_cptlf_iq_free(pf);
+ return ret;
+}
+
+static int cn10k_outb_cpt_init(struct net_device *netdev)
+{
+ struct otx2_nic *pf = netdev_priv(netdev);
+ int ret;
+
+ mutex_lock(&pf->ipsec.lock);
+
+ /* Attach a CPT LF for outbound inline ipsec */
+ ret = cn10k_outb_cptlf_attach(pf);
+ if (ret)
+ goto unlock;
+
+ /* Allocate a CPT LF for outbound inline ipsec */
+ ret = cn10k_outb_cptlf_alloc(pf);
+ if (ret)
+ goto detach;
+
+ /* Initialize the CPTLF for outbound inline ipsec */
+ ret = cn10k_outb_cptlf_init(pf);
+ if (ret)
+ goto lf_free;
+
+ pf->ipsec.io_addr = (__force u64)otx2_get_regaddr(pf,
+ CN10K_CPT_LF_NQX(0));
+
+ /* Set inline ipsec enabled for this device */
+ pf->flags |= OTX2_FLAG_INLINE_IPSEC_ENABLED;
+
+ goto unlock;
+
+lf_free:
+ cn10k_outb_cptlf_free(pf);
+detach:
+ cn10k_outb_cptlf_detach(pf);
+unlock:
+ mutex_unlock(&pf->ipsec.lock);
+ return ret;
+}
+
+static int cn10k_outb_cpt_clean(struct otx2_nic *pf)
+{
+ int err;
+
+ mutex_lock(&pf->ipsec.lock);
+
+ /* Set inline ipsec disabled for this device */
+ pf->flags &= ~OTX2_FLAG_INLINE_IPSEC_ENABLED;
+
+ /* Disable CPTLF Instruction Queue (IQ) */
+ cn10k_outb_cptlf_iq_disable(pf);
+
+ /* Set IQ base address and size to 0 */
+ otx2_write64(pf, CN10K_CPT_LF_Q_BASE, 0);
+ otx2_write64(pf, CN10K_CPT_LF_Q_SIZE, 0);
+
+ /* Free CPTLF IQ */
+ cn10k_outb_cptlf_iq_free(pf);
+
+ /* Free and detach CPT LF */
+ cn10k_outb_cptlf_free(pf);
+ err = cn10k_outb_cptlf_detach(pf);
+ if (err)
+ netdev_err(pf->netdev, "Failed to detach CPT LF\n");
+
+ mutex_unlock(&pf->ipsec.lock);
+ return err;
+}
+
+int cn10k_ipsec_ethtool_init(struct net_device *netdev, bool enable)
+{
+ struct otx2_nic *pf = netdev_priv(netdev);
+
+ /* Inline ipsec supported on cn10k */
+ if (!is_dev_support_inline_ipsec(pf->pdev))
+ return -ENODEV;
+
+ if (!enable)
+ return cn10k_outb_cpt_clean(pf);
+
+ /* Initialize CPT for outbound inline ipsec */
+ return cn10k_outb_cpt_init(netdev);
+}
+
+int cn10k_ipsec_init(struct net_device *netdev)
+{
+ struct otx2_nic *pf = netdev_priv(netdev);
+
+ if (!is_dev_support_inline_ipsec(pf->pdev))
+ return 0;
+
+ mutex_init(&pf->ipsec.lock);
+ return 0;
+}
+
+void cn10k_ipsec_clean(struct otx2_nic *pf)
+{
+ if (!is_dev_support_inline_ipsec(pf->pdev))
+ return;
+
+ cn10k_outb_cpt_clean(pf);
+}
new file mode 100644
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell IPSEC offload driver
+ *
+ * Copyright (C) 2022 Marvell.
+ */
+
+#ifndef CN10K_IPSEC_H
+#define CN10K_IPSEC_H
+
+#include <linux/types.h>
+
+/* CPT instruction size in bytes */
+#define CN10K_CPT_INST_SIZE 64
+
+/* CPT instruction (CPT_INST_S) queue length */
+#define CN10K_CPT_INST_QLEN 8200
+
+/* CPT instruction queue size passed to HW is in units of
+ * 40*CPT_INST_S messages.
+ */
+#define CN10K_CPT_SIZE_DIV40 (CN10K_CPT_INST_QLEN / 40)
+
+/* CPT needs 320 free entries */
+#define CN10K_CPT_INST_QLEN_EXTRA_BYTES (320 * CN10K_CPT_INST_SIZE)
+#define CN10K_CPT_EXTRA_SIZE_DIV40 (320 / 40)
+
+/* CPT instruction queue length in bytes */
+#define CN10K_CPT_INST_QLEN_BYTES \
+ ((CN10K_CPT_SIZE_DIV40 * 40 * CN10K_CPT_INST_SIZE) + \
+ CN10K_CPT_INST_QLEN_EXTRA_BYTES)
+
+/* CPT instruction group queue length in bytes */
+#define CN10K_CPT_INST_GRP_QLEN_BYTES \
+ ((CN10K_CPT_SIZE_DIV40 + CN10K_CPT_EXTRA_SIZE_DIV40) * 16)
+
+/* CPT FC length in bytes */
+#define CN10K_CPT_Q_FC_LEN 128
+
+/* Default CPT engine group for inline ipsec */
+#define CN10K_DEF_CPT_IPSEC_EGRP 1
+
+/* CN10K CPT LF registers */
+#define CPT_LFBASE (BLKTYPE_CPT << RVU_FUNC_BLKADDR_SHIFT)
+#define CN10K_CPT_LF_CTL (CPT_LFBASE | 0x10)
+#define CN10K_CPT_LF_INPROG (CPT_LFBASE | 0x40)
+#define CN10K_CPT_LF_Q_BASE (CPT_LFBASE | 0xf0)
+#define CN10K_CPT_LF_Q_SIZE (CPT_LFBASE | 0x100)
+#define CN10K_CPT_LF_Q_INST_PTR (CPT_LFBASE | 0x110)
+#define CN10K_CPT_LF_Q_GRP_PTR (CPT_LFBASE | 0x120)
+#define CN10K_CPT_LF_NQX(a) (CPT_LFBASE | 0x400 | (a) << 3)
+#define CN10K_CPT_LF_CTX_FLUSH (CPT_LFBASE | 0x510)
+
+struct cn10k_cpt_inst_queue {
+ u8 *vaddr;
+ u8 *real_vaddr;
+ dma_addr_t dma_addr;
+ dma_addr_t real_dma_addr;
+ u32 size;
+};
+
+struct cn10k_ipsec {
+ /* Outbound CPT */
+ u64 io_addr;
+ /* Lock to protect SA management */
+ struct mutex lock;
+ struct cn10k_cpt_inst_queue iq;
+};
+
+/* CPT LF_INPROG Register */
+#define CPT_LF_INPROG_INFLIGHT GENMASK_ULL(8, 0)
+#define CPT_LF_INPROG_GRB_CNT GENMASK_ULL(39, 32)
+#define CPT_LF_INPROG_GWB_CNT GENMASK_ULL(47, 40)
+
+/* CPT LF_Q_GRP_PTR Register */
+#define CPT_LF_Q_GRP_PTR_DQ_PTR GENMASK_ULL(14, 0)
+#define CPT_LF_Q_GRP_PTR_NQ_PTR GENMASK_ULL(46, 32)
+
+/* CPT LF_Q_SIZE Register */
+#define CPT_LF_Q_BASE_ADDR GENMASK_ULL(52, 7)
+
+/* CPT LF_Q_SIZE Register */
+#define CPT_LF_Q_SIZE_DIV40 GENMASK_ULL(14, 0)
+
+#ifdef CONFIG_XFRM_OFFLOAD
+int cn10k_ipsec_init(struct net_device *netdev);
+void cn10k_ipsec_clean(struct otx2_nic *pf);
+int cn10k_ipsec_ethtool_init(struct net_device *netdev, bool enable);
+#else
+static __maybe_unused int cn10k_ipsec_init(struct net_device *netdev)
+{
+ return 0;
+}
+
+static __maybe_unused void cn10k_ipsec_clean(struct otx2_nic *pf)
+{
+}
+
+static __maybe_unused
+int cn10k_ipsec_ethtool_init(struct net_device *netdev, bool enable)
+{
+ return 0;
+}
+#endif
+#endif // CN10K_IPSEC_H
@@ -29,6 +29,7 @@
#include "otx2_devlink.h"
#include <rvu_trace.h>
#include "qos.h"
+#include "cn10k_ipsec.h"
/* IPv4 flag more fragment bit */
#define IPV4_FLAG_MORE 0x20
@@ -39,6 +40,7 @@
#define PCI_DEVID_OCTEONTX2_RVU_AFVF 0xA0F8
#define PCI_SUBSYS_DEVID_96XX_RVU_PFVF 0xB200
+#define PCI_SUBSYS_DEVID_CN10K_A_RVU_PFVF 0xB900
#define PCI_SUBSYS_DEVID_CN10K_B_RVU_PFVF 0xBD00
/* PCI BAR nos */
@@ -467,6 +469,7 @@ struct otx2_nic {
#define OTX2_FLAG_PTP_ONESTEP_SYNC BIT_ULL(15)
#define OTX2_FLAG_ADPTV_INT_COAL_ENABLED BIT_ULL(16)
#define OTX2_FLAG_TC_MARK_ENABLED BIT_ULL(17)
+#define OTX2_FLAG_INLINE_IPSEC_ENABLED BIT_ULL(18)
u64 flags;
u64 *cq_op_addr;
@@ -534,6 +537,9 @@ struct otx2_nic {
#if IS_ENABLED(CONFIG_MACSEC)
struct cn10k_mcs_cfg *macsec_cfg;
#endif
+
+ /* Inline ipsec */
+ struct cn10k_ipsec ipsec;
};
static inline bool is_otx2_lbkvf(struct pci_dev *pdev)
@@ -578,6 +584,15 @@ static inline bool is_dev_cn10kb(struct pci_dev *pdev)
return pdev->subsystem_device == PCI_SUBSYS_DEVID_CN10K_B_RVU_PFVF;
}
+static inline bool is_dev_cn10ka_b0(struct pci_dev *pdev)
+{
+ if (pdev->subsystem_device == PCI_SUBSYS_DEVID_CN10K_A_RVU_PFVF &&
+ (pdev->revision & 0xFF) == 0x54)
+ return true;
+
+ return false;
+}
+
static inline void otx2_setup_dev_hw_settings(struct otx2_nic *pfvf)
{
struct otx2_hw *hw = &pfvf->hw;
@@ -627,6 +642,9 @@ static inline void __iomem *otx2_get_regaddr(struct otx2_nic *nic, u64 offset)
case BLKTYPE_NPA:
blkaddr = BLKADDR_NPA;
break;
+ case BLKTYPE_CPT:
+ blkaddr = BLKADDR_CPT0;
+ break;
default:
blkaddr = BLKADDR_RVUM;
break;
@@ -26,6 +26,7 @@
#include "cn10k.h"
#include "qos.h"
#include <rvu_trace.h>
+#include "cn10k_ipsec.h"
#define DRV_NAME "rvu_nicpf"
#define DRV_STRING "Marvell RVU NIC Physical Function Driver"
@@ -2201,6 +2202,10 @@ static int otx2_set_features(struct net_device *netdev,
return otx2_enable_rxvlan(pf,
features & NETIF_F_HW_VLAN_CTAG_RX);
+ if (changed & NETIF_F_HW_ESP)
+ return cn10k_ipsec_ethtool_init(netdev,
+ features & NETIF_F_HW_ESP);
+
return otx2_handle_ntuple_tc_features(netdev, features);
}
@@ -3065,10 +3070,14 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
/* reset CGX/RPM MAC stats */
otx2_reset_mac_stats(pf);
+ err = cn10k_ipsec_init(netdev);
+ if (err)
+ goto err_mcs_free;
+
err = register_netdev(netdev);
if (err) {
dev_err(dev, "Failed to register netdevice\n");
- goto err_mcs_free;
+ goto err_ipsec_clean;
}
err = otx2_wq_init(pf);
@@ -3109,6 +3118,8 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
otx2_mcam_flow_del(pf);
err_unreg_netdev:
unregister_netdev(netdev);
+err_ipsec_clean:
+ cn10k_ipsec_clean(pf);
err_mcs_free:
cn10k_mcs_free(pf);
err_del_mcam_entries:
@@ -3286,6 +3297,7 @@ static void otx2_remove(struct pci_dev *pdev)
otx2_unregister_dl(pf);
unregister_netdev(netdev);
+ cn10k_ipsec_clean(pf);
cn10k_mcs_free(pf);
otx2_sriov_disable(pf->pdev);
otx2_sriov_vfcfg_cleanup(pf);
@@ -14,6 +14,7 @@
#include "otx2_reg.h"
#include "otx2_ptp.h"
#include "cn10k.h"
+#include "cn10k_ipsec.h"
#define DRV_NAME "rvu_nicvf"
#define DRV_STRING "Marvell RVU NIC Virtual Function Driver"
@@ -682,10 +683,14 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
snprintf(netdev->name, sizeof(netdev->name), "lbk%d", n);
}
+ err = cn10k_ipsec_init(netdev);
+ if (err)
+ goto err_ptp_destroy;
+
err = register_netdev(netdev);
if (err) {
dev_err(dev, "Failed to register netdevice\n");
- goto err_ptp_destroy;
+ goto err_ipsec_clean;
}
err = otx2_wq_init(vf);
@@ -719,6 +724,8 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
otx2_shutdown_tc(vf);
err_unreg_netdev:
unregister_netdev(netdev);
+err_ipsec_clean:
+ cn10k_ipsec_clean(vf);
err_ptp_destroy:
otx2_ptp_destroy(vf);
err_detach_rsrc:
@@ -771,6 +778,7 @@ static void otx2vf_remove(struct pci_dev *pdev)
unregister_netdev(netdev);
if (vf->otx2_wq)
destroy_workqueue(vf->otx2_wq);
+ cn10k_ipsec_clean(vf);
otx2_ptp_destroy(vf);
otx2_mcam_flow_del(vf);
otx2_shutdown_tc(vf);
One crypto hardware logical function (cpt-lf) per netdev is required for inline ipsec outbound functionality. Allocate, attach and initialize one crypto hardware function when enabling inline ipsec crypto offload. Crypto hardware function will be detached and freed on disabling inline ipsec. Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> --- .../ethernet/marvell/octeontx2/nic/Makefile | 1 + .../marvell/octeontx2/nic/cn10k_ipsec.c | 391 ++++++++++++++++++ .../marvell/octeontx2/nic/cn10k_ipsec.h | 104 +++++ .../marvell/octeontx2/nic/otx2_common.h | 18 + .../ethernet/marvell/octeontx2/nic/otx2_pf.c | 14 +- .../ethernet/marvell/octeontx2/nic/otx2_vf.c | 10 +- 6 files changed, 536 insertions(+), 2 deletions(-) create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/cn10k_ipsec.c create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/cn10k_ipsec.h