diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile
index 4fb0d9e..e0444ae 100644
--- a/drivers/net/ethernet/intel/ixgbe/Makefile
+++ b/drivers/net/ethernet/intel/ixgbe/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-# Copyright(c) 1999 - 2018 Intel Corporation.
+# Copyright(c) 1999 - 2024 Intel Corporation.
 #
 # Makefile for the Intel(R) 10GbE PCI Express ethernet driver
 #
@@ -9,7 +9,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o
 ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
               ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \
               ixgbe_mbx.o ixgbe_x540.o ixgbe_x550.o ixgbe_lib.o ixgbe_ptp.o \
-              ixgbe_xsk.o
+              ixgbe_xsk.o ixgbe_e610.o
 
 ixgbe-$(CONFIG_IXGBE_DCB) +=  ixgbe_dcb.o ixgbe_dcb_82598.o \
                               ixgbe_dcb_82599.o ixgbe_dcb_nl.o
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c
new file mode 100644
index 0000000..eb611cb
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c
@@ -0,0 +1,492 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2024 Intel Corporation. */
+
+#include "ixgbe_common.h"
+#include "ixgbe_e610.h"
+#include "ixgbe_type.h"
+#include "ixgbe_x540.h"
+#include "ixgbe_phy.h"
+
+/**
+ * ixgbe_should_retry_aci_send_cmd_execute - decide if ACI command should
+ * be resent
+ * @opcode: ACI opcode
+ *
+ * Check if ACI command should be sent again depending on the provided opcode.
+ * It may happen when CSR is busy during link state changes.
+ *
+ * Return: true if the sending command routine should be repeated,
+ * otherwise false.
+ */
+static bool ixgbe_should_retry_aci_send_cmd_execute(u16 opcode)
+{
+	switch (opcode) {
+	case ixgbe_aci_opc_disable_rxen:
+	case ixgbe_aci_opc_get_phy_caps:
+	case ixgbe_aci_opc_get_link_status:
+	case ixgbe_aci_opc_get_link_topo:
+		return true;
+	}
+
+	return false;
+}
+
+/**
+ * ixgbe_aci_send_cmd_execute - execute sending FW Admin Command to FW Admin
+ * Command Interface
+ * @hw: pointer to the HW struct
+ * @desc: descriptor describing the command
+ * @buf: buffer to use for indirect commands (NULL for direct commands)
+ * @buf_size: size of buffer for indirect commands (0 for direct commands)
+ *
+ * Admin Command is sent using CSR by setting descriptor and buffer in specific
+ * registers.
+ *
+ * Return: the exit code of the operation.
+ * * - 0 - success.
+ * * - -EIO - CSR mechanism is not enabled.
+ * * - -EBUSY - CSR mechanism is busy.
+ * * - -EINVAL - buf_size is too big or
+ * invalid argument buf or buf_size.
+ * * - -ETIME - Admin Command X command timeout.
+ * * - -EIO - Admin Command X invalid state of HICR register or
+ * Admin Command failed because of bad opcode was returned or
+ * Admin Command failed with error Y.
+ */
+static int ixgbe_aci_send_cmd_execute(struct ixgbe_hw *hw,
+				      struct ixgbe_aci_desc *desc,
+				      void *buf, u16 buf_size)
+{
+	u16 opcode, buf_tail_size = buf_size % 4;
+	u32 *raw_desc = (u32 *)desc;
+	u32 hicr, i, buf_tail = 0;
+	bool valid_buf = false;
+
+	hw->aci.last_status = IXGBE_ACI_RC_OK;
+
+	/* It's necessary to check if mechanism is enabled */
+	hicr = IXGBE_READ_REG(hw, IXGBE_PF_HICR);
+
+	if (!(hicr & IXGBE_PF_HICR_EN))
+		return -EIO;
+
+	if (hicr & IXGBE_PF_HICR_C)
+		return -EBUSY;
+
+	opcode = desc->opcode;
+
+	if (buf_size > IXGBE_ACI_MAX_BUFFER_SIZE)
+		return -EINVAL;
+
+	if (buf)
+		desc->flags |= IXGBE_ACI_FLAG_BUF;
+
+	if (desc->flags & IXGBE_ACI_FLAG_BUF) {
+		if ((buf && !buf_size) ||
+		    (!buf && buf_size))
+			return -EINVAL;
+		if (buf && buf_size)
+			valid_buf = true;
+	}
+
+	if (valid_buf) {
+		if (buf_tail_size)
+			memcpy(&buf_tail, buf + buf_size - buf_tail_size,
+			       buf_tail_size);
+
+		if (((buf_size+3) & ~0x3) > IXGBE_ACI_LG_BUF)
+			desc->flags |= IXGBE_ACI_FLAG_LB;
+
+		desc->datalen = buf_size;
+
+		if (desc->flags & IXGBE_ACI_FLAG_RD) {
+			for (i = 0; i < buf_size / 4; i++)
+				IXGBE_WRITE_REG(hw, IXGBE_PF_HIBA(i), ((u32 *)buf)[i]);
+			if (buf_tail_size)
+				IXGBE_WRITE_REG(hw, IXGBE_PF_HIBA(i), buf_tail);
+		}
+	}
+
+	/* Descriptor is written to specific registers */
+	for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_PF_HIDA(i), raw_desc[i]);
+
+	/* SW has to set PF_HICR.C bit and clear PF_HICR.SV and
+	 * PF_HICR_EV
+	 */
+	hicr = (IXGBE_READ_REG(hw, IXGBE_PF_HICR) | IXGBE_PF_HICR_C) &
+	       ~(IXGBE_PF_HICR_SV | IXGBE_PF_HICR_EV);
+	IXGBE_WRITE_REG(hw, IXGBE_PF_HICR, hicr);
+
+#define MAX_SLEEP_RESP_US 1000
+#define MAX_TMOUT_RESP_SYNC_US 100000000
+
+	/* Wait for sync Admin Command response */
+	read_poll_timeout(IXGBE_READ_REG, hicr,
+			  (hicr & IXGBE_PF_HICR_SV) ||
+			  !(hicr & IXGBE_PF_HICR_C),
+			  MAX_SLEEP_RESP_US, MAX_TMOUT_RESP_SYNC_US, true, hw,
+			  IXGBE_PF_HICR);
+
+#define MAX_TMOUT_RESP_ASYNC_US 150000000
+
+	/* Wait for async Admin Command response */
+	read_poll_timeout(IXGBE_READ_REG, hicr,
+			  (hicr & IXGBE_PF_HICR_EV) ||
+			  !(hicr & IXGBE_PF_HICR_C),
+			  MAX_SLEEP_RESP_US, MAX_TMOUT_RESP_ASYNC_US, true, hw,
+			  IXGBE_PF_HICR);
+
+	/* Read sync Admin Command response */
+	if ((hicr & IXGBE_PF_HICR_SV)) {
+		for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++) {
+			raw_desc[i] = IXGBE_READ_REG(hw, IXGBE_PF_HIDA(i));
+			raw_desc[i] = raw_desc[i];
+		}
+	}
+
+	/* Read async Admin Command response */
+	if ((hicr & IXGBE_PF_HICR_EV) && !(hicr & IXGBE_PF_HICR_C)) {
+		for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++) {
+			raw_desc[i] = IXGBE_READ_REG(hw, IXGBE_PF_HIDA_2(i));
+			raw_desc[i] = raw_desc[i];
+		}
+	}
+
+	/* Handle timeout and invalid state of HICR register */
+	if (hicr & IXGBE_PF_HICR_C)
+		return -ETIME;
+
+	if (!(hicr & IXGBE_PF_HICR_SV) && !(hicr & IXGBE_PF_HICR_EV))
+		return -EIO;
+
+	/* For every command other than 0x0014 treat opcode mismatch
+	 * as an error. Response to 0x0014 command read from HIDA_2
+	 * is a descriptor of an event which is expected to contain
+	 * different opcode than the command.
+	 */
+	if (desc->opcode != opcode &&
+	    opcode != ixgbe_aci_opc_get_fw_event)
+		return -EIO;
+
+	if (desc->retval) {
+		hw->aci.last_status = (enum ixgbe_aci_err)desc->retval;
+		return -EIO;
+	}
+
+	/* Write a response values to a buf */
+	if (valid_buf) {
+		for (i = 0; i < buf_size / 4; i++)
+			((u32 *)buf)[i] = IXGBE_READ_REG(hw, IXGBE_PF_HIBA(i));
+		if (buf_tail_size) {
+			buf_tail = IXGBE_READ_REG(hw, IXGBE_PF_HIBA(i));
+			memcpy(buf + buf_size - buf_tail_size, &buf_tail,
+			       buf_tail_size);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_aci_send_cmd - send FW Admin Command to FW Admin Command Interface
+ * @hw: pointer to the HW struct
+ * @desc: descriptor describing the command
+ * @buf: buffer to use for indirect commands (NULL for direct commands)
+ * @buf_size: size of buffer for indirect commands (0 for direct commands)
+ *
+ * Helper function to send FW Admin Commands to the FW Admin Command Interface.
+ *
+ * Retry sending the FW Admin Command multiple times to the FW ACI
+ * if the EBUSY Admin Command error is returned.
+ *
+ * Return: the exit code of the operation.
+ */
+int ixgbe_aci_send_cmd(struct ixgbe_hw *hw, struct ixgbe_aci_desc *desc,
+		       void *buf, u16 buf_size)
+{
+	u8 idx = 0, *buf_cpy __free(kfree) = NULL;
+	struct ixgbe_aci_desc desc_cpy;
+	enum ixgbe_aci_err last_status;
+	u16 opcode = desc->opcode;
+	bool is_cmd_for_retry;
+	unsigned long timeout;
+	int err;
+
+	is_cmd_for_retry = ixgbe_should_retry_aci_send_cmd_execute(opcode);
+
+	if (is_cmd_for_retry) {
+		if (buf) {
+			buf_cpy = kmalloc(buf_size, GFP_KERNEL);
+			if (!buf_cpy)
+				return -ENOMEM;
+			*buf_cpy = *(u8 *)buf;
+
+		}
+		desc_cpy = *desc;
+	}
+
+	timeout = jiffies + msecs_to_jiffies(IXGBE_ACI_SEND_TIMEOUT_MS);
+	do {
+		mutex_lock(&hw->aci.lock);
+		err = ixgbe_aci_send_cmd_execute(hw, desc, buf, buf_size);
+		last_status = hw->aci.last_status;
+		mutex_unlock(&hw->aci.lock);
+
+		if (!is_cmd_for_retry || !err ||
+		    last_status != IXGBE_ACI_RC_EBUSY)
+			break;
+
+		if (buf)
+			memcpy(buf, buf_cpy, buf_size);
+		*desc = desc_cpy;
+
+		msleep(IXGBE_ACI_SEND_DELAY_TIME_MS);
+	} while (++idx < IXGBE_ACI_SEND_MAX_EXECUTE &&
+		 time_before(jiffies, timeout));
+
+	return err;
+}
+
+/**
+ * ixgbe_aci_check_event_pending - check if there are any pending events
+ * @hw: pointer to the HW struct
+ *
+ * Determine if there are any pending events.
+ *
+ * Return: true if there are any currently pending events
+ * otherwise false.
+ */
+bool ixgbe_aci_check_event_pending(struct ixgbe_hw *hw)
+{
+	/* Check state of Event Pending (EP) bit */
+	return IXGBE_READ_REG(hw, IXGBE_PF_HICR) & IXGBE_PF_HICR_EP;
+}
+
+/**
+ * ixgbe_aci_get_event - get an event from ACI
+ * @hw: pointer to the HW struct
+ * @e: event information structure
+ * @pending: optional flag signaling that there are more pending events
+ *
+ * Obtain an event from ACI and return its content
+ * through 'e' using ACI command (0x0014).
+ * Provide information if there are more events
+ * to retrieve through 'pending'.
+ *
+ * Return: the exit code of the operation.
+ */
+int ixgbe_aci_get_event(struct ixgbe_hw *hw, struct ixgbe_aci_event *e,
+			bool *pending)
+{
+	struct ixgbe_aci_desc desc;
+	int err;
+
+	if (!e || (!e->msg_buf && e->buf_len))
+		return -EINVAL;
+
+	mutex_lock(&hw->aci.lock);
+
+	/* Check if there are any events pending */
+	if (!ixgbe_aci_check_event_pending(hw)) {
+		err = -ENOENT;
+		goto aci_get_event_exit;
+	}
+
+	/* Obtain pending event */
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_fw_event);
+	err = ixgbe_aci_send_cmd_execute(hw, &desc, e->msg_buf, e->buf_len);
+	if (err)
+		goto aci_get_event_exit;
+
+	/* Returned 0x0014 opcode indicates that no event was obtained */
+	if (desc.opcode == ixgbe_aci_opc_get_fw_event) {
+		err = -ENOENT;
+		goto aci_get_event_exit;
+	}
+
+	/* Determine size of event data */
+	e->msg_len = min_t(u16, desc.datalen, e->buf_len);
+	/* Write event descriptor to event info structure */
+	memcpy(&e->desc, &desc, sizeof(e->desc));
+
+	/* Check if there are any further events pending */
+	if (pending)
+		*pending = ixgbe_aci_check_event_pending(hw);
+
+aci_get_event_exit:
+	mutex_unlock(&hw->aci.lock);
+
+	return err;
+}
+
+/**
+ * ixgbe_fill_dflt_direct_cmd_desc - fill ACI descriptor with default values.
+ * @desc: pointer to the temp descriptor (non DMA mem)
+ * @opcode: the opcode can be used to decide which flags to turn off or on
+ *
+ * Helper function to fill the descriptor desc with default values
+ * and the provided opcode.
+ */
+void ixgbe_fill_dflt_direct_cmd_desc(struct ixgbe_aci_desc *desc, u16 opcode)
+{
+	/* Zero out the desc. */
+	memset(desc, 0, sizeof(*desc));
+	desc->opcode = opcode;
+	desc->flags = IXGBE_ACI_FLAG_SI;
+}
+
+/**
+ * ixgbe_aci_req_res - request a common resource
+ * @hw: pointer to the HW struct
+ * @res: resource ID
+ * @access: access type
+ * @sdp_number: resource number
+ * @timeout: the maximum time in ms that the driver may hold the resource
+ *
+ * Requests a common resource using the ACI command (0x0008).
+ * Specifies the maximum time the driver may hold the resource.
+ * If the requested resource is currently occupied by some other driver,
+ * a busy return value is returned and the timeout field value indicates the
+ * maximum time the current owner has to free it.
+ *
+ * Return: the exit code of the operation.
+ */
+static int ixgbe_aci_req_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res,
+			     enum ixgbe_aci_res_access_type access,
+			     u8 sdp_number, u32 *timeout)
+{
+	struct ixgbe_aci_cmd_req_res *cmd_resp;
+	struct ixgbe_aci_desc desc;
+	int err;
+
+	cmd_resp = &desc.params.res_owner;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_req_res);
+
+	cmd_resp->res_id = res;
+	cmd_resp->access_type = access;
+	cmd_resp->res_number = sdp_number;
+	cmd_resp->timeout = *timeout;
+	*timeout = 0;
+
+	err = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+	/* If the resource is held by some other driver, the command completes
+	 * with a busy return value and the timeout field indicates the maximum
+	 * time the current owner of the resource has to free it.
+	 */
+	if (!err || hw->aci.last_status == IXGBE_ACI_RC_EBUSY)
+		*timeout = cmd_resp->timeout;
+
+	return err;
+}
+
+/**
+ * ixgbe_aci_release_res - release a common resource using ACI
+ * @hw: pointer to the HW struct
+ * @res: resource ID
+ * @sdp_number: resource number
+ *
+ * Release a common resource using ACI command (0x0009).
+ *
+ * Return: the exit code of the operation.
+ */
+static int ixgbe_aci_release_res(struct ixgbe_hw *hw,
+				 enum ixgbe_aci_res_ids res, u8 sdp_number)
+{
+	struct ixgbe_aci_cmd_req_res *cmd;
+	struct ixgbe_aci_desc desc;
+
+	cmd = &desc.params.res_owner;
+
+	ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_release_res);
+
+	cmd->res_id = res;
+	cmd->res_number = sdp_number;
+
+	return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_acquire_res - acquire the ownership of a resource
+ * @hw: pointer to the HW structure
+ * @res: resource ID
+ * @access: access type (read or write)
+ * @timeout: timeout in milliseconds
+ *
+ * Make an attempt to acquire the ownership of a resource using
+ * the ixgbe_aci_req_res to utilize ACI.
+ * In case if some other driver has previously acquired the resource and
+ * performed any necessary updates, the -EALREADY is returned,
+ * and the caller does not obtain the resource and has no further work to do.
+ * If needed, the function will poll until the current lock owner timeouts.
+ *
+ * Return: the exit code of the operation.
+ */
+int ixgbe_acquire_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res,
+		      enum ixgbe_aci_res_access_type access, u32 timeout)
+{
+#define IXGBE_RES_POLLING_DELAY_MS	10
+	u32 delay = IXGBE_RES_POLLING_DELAY_MS;
+	u32 res_timeout = timeout;
+	u32 retry_timeout;
+	int err;
+
+	err = ixgbe_aci_req_res(hw, res, access, 0, &res_timeout);
+
+	/* A return code of -EALREADY means that another driver has
+	 * previously acquired the resource and performed any necessary updates;
+	 * in this case the caller does not obtain the resource and has no
+	 * further work to do.
+	 */
+	if (err == -EALREADY)
+		return err;
+
+	/* If necessary, poll until the current lock owner timeouts.
+	 * Set retry_timeout to the timeout value reported by the FW in the
+	 * response to the "Request Resource Ownership" (0x0008) Admin Command
+	 * as it indicates the maximum time the current owner of the resource
+	 * is allowed to hold it.
+	 */
+	retry_timeout = res_timeout;
+	while (err && retry_timeout && res_timeout) {
+		msleep(delay);
+		retry_timeout = (retry_timeout > delay) ?
+			retry_timeout - delay : 0;
+		err = ixgbe_aci_req_res(hw, res, access, 0, &res_timeout);
+
+		/* Success - lock acquired.
+		 * -EALREADY - lock free, no work to do.
+		 */
+		if (!err || err == -EALREADY)
+			break;
+	}
+
+	return err;
+}
+
+/**
+ * ixgbe_release_res - release a common resource
+ * @hw: pointer to the HW structure
+ * @res: resource ID
+ *
+ * Release a common resource using ixgbe_aci_release_res.
+ */
+void ixgbe_release_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res)
+{
+	u32 total_delay = 0;
+	int err;
+
+	err = ixgbe_aci_release_res(hw, res, 0);
+
+	/* There are some rare cases when trying to release the resource
+	 * results in an admin command timeout, so handle them correctly.
+	 */
+	while (err == -ETIME &&
+	       total_delay < IXGBE_ACI_RELEASE_RES_TIMEOUT) {
+		usleep_range(1000, 1500);
+		err = ixgbe_aci_release_res(hw, res, 0);
+		total_delay++;
+	}
+}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.h
new file mode 100644
index 0000000..18b831b
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2024 Intel Corporation. */
+
+#ifndef _IXGBE_E610_H_
+#define _IXGBE_E610_H_
+
+#include "ixgbe_type.h"
+
+int ixgbe_aci_send_cmd(struct ixgbe_hw *hw, struct ixgbe_aci_desc *desc,
+		       void *buf, u16 buf_size);
+bool ixgbe_aci_check_event_pending(struct ixgbe_hw *hw);
+int ixgbe_aci_get_event(struct ixgbe_hw *hw, struct ixgbe_aci_event *e,
+			bool *pending);
+void ixgbe_fill_dflt_direct_cmd_desc(struct ixgbe_aci_desc *desc, u16 opcode);
+int ixgbe_acquire_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res,
+		      enum ixgbe_aci_res_access_type access, u32 timeout);
+void ixgbe_release_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res);
+
+#endif /* _IXGBE_E610_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index ed440dd..6bca593 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright(c) 1999 - 2018 Intel Corporation. */
+/* Copyright(c) 1999 - 2024 Intel Corporation. */
 
 #ifndef _IXGBE_TYPE_H_
 #define _IXGBE_TYPE_H_
@@ -7,6 +7,7 @@
 #include <linux/types.h>
 #include <linux/mdio.h>
 #include <linux/netdevice.h>
+#include "ixgbe_type_e610.h"
 
 /* Device IDs */
 #define IXGBE_DEV_ID_82598               0x10B6
@@ -71,12 +72,19 @@
 #define IXGBE_DEV_ID_X550EM_A_1G_T	0x15E4
 #define IXGBE_DEV_ID_X550EM_A_1G_T_L	0x15E5
 
+#define IXGBE_DEV_ID_E610_BACKPLANE	0x57AE
+#define IXGBE_DEV_ID_E610_SFP		0x57AF
+#define IXGBE_DEV_ID_E610_10G_T		0x57B0
+#define IXGBE_DEV_ID_E610_2_5G_T	0x57B1
+#define IXGBE_DEV_ID_E610_SGMII		0x57B2
+
 /* VF Device IDs */
 #define IXGBE_DEV_ID_82599_VF		0x10ED
 #define IXGBE_DEV_ID_X540_VF		0x1515
 #define IXGBE_DEV_ID_X550_VF		0x1565
 #define IXGBE_DEV_ID_X550EM_X_VF	0x15A8
 #define IXGBE_DEV_ID_X550EM_A_VF	0x15C5
+#define IXGBE_DEV_ID_E610_VF		0x57AD
 
 #define IXGBE_CAT(r, m)	IXGBE_##r##_##m
 
@@ -1600,7 +1608,7 @@ enum {
 #define IXGBE_EICR_PCI          0x00040000 /* PCI Exception */
 #define IXGBE_EICR_MAILBOX      0x00080000 /* VF to PF Mailbox Interrupt */
 #define IXGBE_EICR_LSC          0x00100000 /* Link Status Change */
-#define IXGBE_EICR_LINKSEC      0x00200000 /* PN Threshold */
+#define IXGBE_EICR_FW_EVENT	0x00200000 /* Async FW event */
 #define IXGBE_EICR_MNG          0x00400000 /* Manageability Event Interrupt */
 #define IXGBE_EICR_TS           0x00800000 /* Thermal Sensor Event */
 #define IXGBE_EICR_TIMESYNC     0x01000000 /* Timesync Event */
@@ -1636,6 +1644,7 @@ enum {
 #define IXGBE_EICS_PCI          IXGBE_EICR_PCI       /* PCI Exception */
 #define IXGBE_EICS_MAILBOX      IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
 #define IXGBE_EICS_LSC          IXGBE_EICR_LSC       /* Link Status Change */
+#define IXGBE_EICS_FW_EVENT	IXGBE_EICR_FW_EVENT  /* Async FW event */
 #define IXGBE_EICS_MNG          IXGBE_EICR_MNG       /* MNG Event Interrupt */
 #define IXGBE_EICS_TIMESYNC     IXGBE_EICR_TIMESYNC  /* Timesync Event */
 #define IXGBE_EICS_GPI_SDP0(_hw)	IXGBE_EICR_GPI_SDP0(_hw)
@@ -1654,6 +1663,7 @@ enum {
 #define IXGBE_EIMS_PCI          IXGBE_EICR_PCI       /* PCI Exception */
 #define IXGBE_EIMS_MAILBOX      IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
 #define IXGBE_EIMS_LSC          IXGBE_EICR_LSC       /* Link Status Change */
+#define IXGBE_EIMS_FW_EVENT	IXGBE_EICR_FW_EVENT  /* Async FW event */
 #define IXGBE_EIMS_MNG          IXGBE_EICR_MNG       /* MNG Event Interrupt */
 #define IXGBE_EIMS_TS           IXGBE_EICR_TS        /* Thermel Sensor Event */
 #define IXGBE_EIMS_TIMESYNC     IXGBE_EICR_TIMESYNC  /* Timesync Event */
@@ -1673,6 +1683,7 @@ enum {
 #define IXGBE_EIMC_PCI          IXGBE_EICR_PCI       /* PCI Exception */
 #define IXGBE_EIMC_MAILBOX      IXGBE_EICR_MAILBOX   /* VF to PF Mailbox Int */
 #define IXGBE_EIMC_LSC          IXGBE_EICR_LSC       /* Link Status Change */
+#define IXGBE_EIMC_FW_EVENT	IXGBE_EICR_FW_EVENT  /* Async FW event */
 #define IXGBE_EIMC_MNG          IXGBE_EICR_MNG       /* MNG Event Interrupt */
 #define IXGBE_EIMC_TIMESYNC     IXGBE_EICR_TIMESYNC  /* Timesync Event */
 #define IXGBE_EIMC_GPI_SDP0(_hw)	IXGBE_EICR_GPI_SDP0(_hw)
@@ -2068,6 +2079,7 @@ enum {
 #define IXGBE_SAN_MAC_ADDR_PTR  0x28
 #define IXGBE_DEVICE_CAPS       0x2C
 #define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
+#define IXGBE_PCIE_MSIX_E610_CAPS	0xB2
 #define IXGBE_PCIE_MSIX_82599_CAPS  0x72
 #define IXGBE_MAX_MSIX_VECTORS_82599	0x40
 #define IXGBE_PCIE_MSIX_82598_CAPS  0x62
@@ -2289,6 +2301,7 @@ enum {
 #define IXGBE_RXMTRL_V2_MGMT_MSG		0x0D00
 
 #define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
+#define IXGBE_FCTRL_TPE 0x00000080 /* Tag Promiscuous Ena*/
 #define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
 #define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */
 #define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */
@@ -2352,6 +2365,7 @@ enum {
 /* Multiple Transmit Queue Command Register */
 #define IXGBE_MTQC_RT_ENA       0x1 /* DCB Enable */
 #define IXGBE_MTQC_VT_ENA       0x2 /* VMDQ2 Enable */
+#define IXGBE_MTQC_NUM_TC_OR_Q  0xC /* Number of TCs or TxQs per pool */
 #define IXGBE_MTQC_64Q_1PB      0x0 /* 64 queues 1 pack buffer */
 #define IXGBE_MTQC_32VF         0x8 /* 4 TX Queues per pool w/32VF's */
 #define IXGBE_MTQC_64VF         0x4 /* 2 TX Queues per pool w/64VF's */
@@ -2971,6 +2985,29 @@ typedef u32 ixgbe_link_speed;
 					IXGBE_LINK_SPEED_1GB_FULL | \
 					IXGBE_LINK_SPEED_10GB_FULL)
 
+/* Physical layer type */
+typedef u64 ixgbe_physical_layer;
+#define IXGBE_PHYSICAL_LAYER_UNKNOWN		0
+#define IXGBE_PHYSICAL_LAYER_10GBASE_T		0x00001
+#define IXGBE_PHYSICAL_LAYER_1000BASE_T		0x00002
+#define IXGBE_PHYSICAL_LAYER_100BASE_TX		0x00004
+#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU	0x00008
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LR		0x00010
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM	0x00020
+#define IXGBE_PHYSICAL_LAYER_10GBASE_SR		0x00040
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4	0x00080
+#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4	0x00100
+#define IXGBE_PHYSICAL_LAYER_1000BASE_KX	0x00200
+#define IXGBE_PHYSICAL_LAYER_1000BASE_BX	0x00400
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KR		0x00800
+#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI	0x01000
+#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA	0x02000
+#define IXGBE_PHYSICAL_LAYER_1000BASE_SX	0x04000
+#define IXGBE_PHYSICAL_LAYER_10BASE_T		0x08000
+#define IXGBE_PHYSICAL_LAYER_2500BASE_KX	0x10000
+#define IXGBE_PHYSICAL_LAYER_2500BASE_T		0x20000
+#define IXGBE_PHYSICAL_LAYER_5000BASE_T		0x40000
+
 /* Flow Control Data Sheet defined values
  * Calculation and defines taken from 802.1bb Annex O
  */
@@ -3146,6 +3183,8 @@ enum ixgbe_mac_type {
 	ixgbe_mac_X550,
 	ixgbe_mac_X550EM_x,
 	ixgbe_mac_x550em_a,
+	ixgbe_mac_e610,
+	ixgbe_mac_e610_vf,
 	ixgbe_num_macs
 };
 
@@ -3225,7 +3264,9 @@ enum ixgbe_media_type {
 	ixgbe_media_type_copper,
 	ixgbe_media_type_backplane,
 	ixgbe_media_type_cx4,
-	ixgbe_media_type_virtual
+	ixgbe_media_type_virtual,
+	ixgbe_media_type_da,
+	ixgbe_media_type_aui,
 };
 
 /* Flow Control Settings */
@@ -3234,7 +3275,8 @@ enum ixgbe_fc_mode {
 	ixgbe_fc_rx_pause,
 	ixgbe_fc_tx_pause,
 	ixgbe_fc_full,
-	ixgbe_fc_default
+	ixgbe_fc_default,
+	ixgbe_fc_pfc,
 };
 
 /* Smart Speed Settings */
@@ -3534,6 +3576,9 @@ struct ixgbe_link_operations {
 struct ixgbe_link_info {
 	struct ixgbe_link_operations ops;
 	u8 addr;
+	struct ixgbe_link_status link_info;
+	struct ixgbe_link_status link_info_old;
+	u8 get_link_info;
 };
 
 struct ixgbe_eeprom_info {
@@ -3576,6 +3621,7 @@ struct ixgbe_mac_info {
 	u8				san_mac_rar_index;
 	struct ixgbe_thermal_sensor_data  thermal_sensor_data;
 	bool				set_lben;
+	u32				max_link_up_time;
 	u8				led_link_act;
 };
 
@@ -3600,6 +3646,10 @@ struct ixgbe_phy_info {
 	bool                            reset_if_overtemp;
 	bool                            qsfp_shared_i2c_bus;
 	u32				nw_mng_if_sel;
+	u64				phy_type_low;
+	u64				phy_type_high;
+	u16				curr_user_speed_req;
+	struct ixgbe_aci_cmd_set_phy_cfg_data curr_user_phy_cfg;
 };
 
 #include "ixgbe_mbx.h"
@@ -3655,6 +3705,19 @@ struct ixgbe_hw {
 	bool				allow_unsupported_sfp;
 	bool				wol_enabled;
 	bool				need_crosstalk_fix;
+	u8				api_branch;
+	u8				api_maj_ver;
+	u8				api_min_ver;
+	u8				api_patch;
+	u8				fw_branch;
+	u8				fw_maj_ver;
+	u8				fw_min_ver;
+	u8				fw_patch;
+	u32				fw_build;
+	struct ixgbe_aci_info		aci;
+	struct ixgbe_flash_info		flash;
+	struct ixgbe_hw_dev_caps	dev_caps;
+	struct ixgbe_hw_func_caps	func_caps;
 };
 
 struct ixgbe_info {
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type_e610.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type_e610.h
new file mode 100644
index 0000000..ffd1707
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type_e610.h
@@ -0,0 +1,1061 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2024 Intel Corporation. */
+
+#ifndef _IXGBE_TYPE_E610_H_
+#define _IXGBE_TYPE_E610_H_
+
+#define BYTES_PER_DWORD	4
+
+/* General E610 defines */
+#define IXGBE_MAX_VSI			768
+
+/* Checksum and Shadow RAM pointers */
+#define E610_SR_SW_CHECKSUM_WORD		0x3F
+
+/* Flash Access Register */
+#define IXGBE_GLNVM_FLA			0x000B6108 /* Reset Source: POR */
+#define IXGBE_GLNVM_FLA_LOCKED_S	6
+#define IXGBE_GLNVM_FLA_LOCKED_M	BIT(6)
+
+/* Admin Command Interface (ACI) registers */
+#define IXGBE_PF_HIDA(_i)			(0x00085000 + ((_i) * 4))
+#define IXGBE_PF_HIDA_2(_i)			(0x00085020 + ((_i) * 4))
+#define IXGBE_PF_HIBA(_i)			(0x00084000 + ((_i) * 4))
+#define IXGBE_PF_HICR				0x00082048
+
+#define IXGBE_PF_HICR_EN			BIT(0)
+#define IXGBE_PF_HICR_C				BIT(1)
+#define IXGBE_PF_HICR_SV			BIT(2)
+#define IXGBE_PF_HICR_EV			BIT(3)
+#define IXGBE_PF_HICR_EP			BIT(4)
+
+#define IXGBE_ACI_DESC_SIZE		32
+#define IXGBE_ACI_DESC_SIZE_IN_DWORDS	(IXGBE_ACI_DESC_SIZE / BYTES_PER_DWORD)
+
+#define IXGBE_ACI_MAX_BUFFER_SIZE		4096    /* Size in bytes */
+#define IXGBE_ACI_SEND_DELAY_TIME_MS		10
+#define IXGBE_ACI_SEND_MAX_EXECUTE		3
+#define IXGBE_ACI_SEND_TIMEOUT_MS		\
+		(IXGBE_ACI_SEND_MAX_EXECUTE * IXGBE_ACI_SEND_DELAY_TIME_MS)
+/* [ms] timeout of waiting for sync response */
+#define IXGBE_ACI_SYNC_RESPONSE_TIMEOUT		100000
+/* [ms] timeout of waiting for async response */
+#define IXGBE_ACI_ASYNC_RESPONSE_TIMEOUT	150000
+/* [ms] timeout of waiting for resource release */
+#define IXGBE_ACI_RELEASE_RES_TIMEOUT		10000
+
+/* FW defined boundary for a large buffer, 4k >= Large buffer > 512 bytes */
+#define IXGBE_ACI_LG_BUF		512
+
+/* Flags sub-structure
+ * |0  |1  |2  |3  |4  |5  |6  |7  |8  |9  |10 |11 |12 |13 |14 |15 |
+ * |DD |CMP|ERR|VFE| * *  RESERVED * * |LB |RD |VFC|BUF|SI |EI |FE |
+ */
+
+#define IXGBE_ACI_FLAG_DD	BIT(0) /* 0x1 */
+#define IXGBE_ACI_FLAG_CMP	BIT(1) /* 0x2 */
+#define IXGBE_ACI_FLAG_ERR	BIT(2) /* 0x4 */
+#define IXGBE_ACI_FLAG_VFE	BIT(3) /* 0x8 */
+#define IXGBE_ACI_FLAG_LB	BIT(9) /* 0x200 */
+#define IXGBE_ACI_FLAG_RD	BIT(10) /* 0x400 */
+#define IXGBE_ACI_FLAG_VFC	BIT(11) /* 0x800 */
+#define IXGBE_ACI_FLAG_BUF	BIT(12) /* 0x1000 */
+#define IXGBE_ACI_FLAG_SI	BIT(13) /* 0x2000 */
+#define IXGBE_ACI_FLAG_EI	BIT(14) /* 0x4000 */
+#define IXGBE_ACI_FLAG_FE	BIT(15) /* 0x8000 */
+
+/* Admin Command Interface (ACI) error codes */
+enum ixgbe_aci_err {
+	IXGBE_ACI_RC_OK		= 0,  /* Success */
+	IXGBE_ACI_RC_EPERM	= 1,  /* Operation not permitted */
+	IXGBE_ACI_RC_ENOENT	= 2,  /* No such element */
+	IXGBE_ACI_RC_ESRCH	= 3,  /* Bad opcode */
+	IXGBE_ACI_RC_EINTR	= 4,  /* Operation interrupted */
+	IXGBE_ACI_RC_EIO	= 5,  /* I/O error */
+	IXGBE_ACI_RC_ENXIO	= 6,  /* No such resource */
+	IXGBE_ACI_RC_E2BIG	= 7,  /* Arg too long */
+	IXGBE_ACI_RC_EAGAIN	= 8,  /* Try again */
+	IXGBE_ACI_RC_ENOMEM	= 9,  /* Out of memory */
+	IXGBE_ACI_RC_EACCES	= 10, /* Permission denied */
+	IXGBE_ACI_RC_EFAULT	= 11, /* Bad address */
+	IXGBE_ACI_RC_EBUSY	= 12, /* Device or resource busy */
+	IXGBE_ACI_RC_EEXIST	= 13, /* Object already exists */
+	IXGBE_ACI_RC_EINVAL	= 14, /* Invalid argument */
+	IXGBE_ACI_RC_ENOTTY	= 15, /* Not a typewriter */
+	IXGBE_ACI_RC_ENOSPC	= 16, /* No space left or alloc failure */
+	IXGBE_ACI_RC_ENOSYS	= 17, /* Function not implemented */
+	IXGBE_ACI_RC_ERANGE	= 18, /* Parameter out of range */
+	IXGBE_ACI_RC_EFLUSHED	= 19, /* Cmd flushed due to prev cmd error */
+	IXGBE_ACI_RC_BAD_ADDR	= 20, /* Descriptor contains a bad pointer */
+	IXGBE_ACI_RC_EMODE	= 21, /* Op not allowed in current dev mode */
+	IXGBE_ACI_RC_EFBIG	= 22, /* File too big */
+	IXGBE_ACI_RC_ESBCOMP	= 23, /* SB-IOSF completion unsuccessful */
+	IXGBE_ACI_RC_ENOSEC	= 24, /* Missing security manifest */
+	IXGBE_ACI_RC_EBADSIG	= 25, /* Bad RSA signature */
+	IXGBE_ACI_RC_ESVN	= 26, /* SVN number prohibits this package */
+	IXGBE_ACI_RC_EBADMAN	= 27, /* Manifest hash mismatch */
+	IXGBE_ACI_RC_EBADBUF	= 28, /* Buffer hash mismatches manifest */
+	IXGBE_ACI_RC_EACCES_BMCU	= 29, /* BMC Update in progress */
+};
+
+/* Admin Command Interface (ACI) opcodes */
+enum ixgbe_aci_opc {
+	ixgbe_aci_opc_get_ver				= 0x0001,
+	ixgbe_aci_opc_driver_ver			= 0x0002,
+	ixgbe_aci_opc_get_exp_err			= 0x0005,
+
+	/* resource ownership */
+	ixgbe_aci_opc_req_res				= 0x0008,
+	ixgbe_aci_opc_release_res			= 0x0009,
+
+	/* device/function capabilities */
+	ixgbe_aci_opc_list_func_caps			= 0x000A,
+	ixgbe_aci_opc_list_dev_caps			= 0x000B,
+
+	/* safe disable of RXEN */
+	ixgbe_aci_opc_disable_rxen			= 0x000C,
+
+	/* FW events */
+	ixgbe_aci_opc_get_fw_event			= 0x0014,
+
+	/* PHY commands */
+	ixgbe_aci_opc_get_phy_caps			= 0x0600,
+	ixgbe_aci_opc_set_phy_cfg			= 0x0601,
+	ixgbe_aci_opc_restart_an			= 0x0605,
+	ixgbe_aci_opc_get_link_status			= 0x0607,
+	ixgbe_aci_opc_set_event_mask			= 0x0613,
+	ixgbe_aci_opc_get_link_topo			= 0x06E0,
+	ixgbe_aci_opc_get_link_topo_pin			= 0x06E1,
+	ixgbe_aci_opc_read_i2c				= 0x06E2,
+	ixgbe_aci_opc_write_i2c				= 0x06E3,
+	ixgbe_aci_opc_read_mdio				= 0x06E4,
+	ixgbe_aci_opc_write_mdio			= 0x06E5,
+	ixgbe_aci_opc_set_gpio_by_func			= 0x06E6,
+	ixgbe_aci_opc_get_gpio_by_func			= 0x06E7,
+	ixgbe_aci_opc_set_gpio				= 0x06EC,
+	ixgbe_aci_opc_get_gpio				= 0x06ED,
+	ixgbe_aci_opc_sff_eeprom			= 0x06EE,
+	ixgbe_aci_opc_prog_topo_dev_nvm			= 0x06F2,
+	ixgbe_aci_opc_read_topo_dev_nvm			= 0x06F3,
+
+	/* NVM commands */
+	ixgbe_aci_opc_nvm_read				= 0x0701,
+	ixgbe_aci_opc_nvm_erase				= 0x0702,
+	ixgbe_aci_opc_nvm_write				= 0x0703,
+	ixgbe_aci_opc_nvm_cfg_read			= 0x0704,
+	ixgbe_aci_opc_nvm_cfg_write			= 0x0705,
+	ixgbe_aci_opc_nvm_checksum			= 0x0706,
+	ixgbe_aci_opc_nvm_write_activate		= 0x0707,
+	ixgbe_aci_opc_nvm_sr_dump			= 0x0707,
+	ixgbe_aci_opc_nvm_save_factory_settings		= 0x0708,
+	ixgbe_aci_opc_nvm_update_empr			= 0x0709,
+	ixgbe_aci_opc_nvm_pkg_data			= 0x070A,
+	ixgbe_aci_opc_nvm_pass_component_tbl		= 0x070B,
+
+	/* Alternate Structure Commands */
+	ixgbe_aci_opc_write_alt_direct			= 0x0900,
+	ixgbe_aci_opc_write_alt_indirect		= 0x0901,
+	ixgbe_aci_opc_read_alt_direct			= 0x0902,
+	ixgbe_aci_opc_read_alt_indirect			= 0x0903,
+	ixgbe_aci_opc_done_alt_write			= 0x0904,
+	ixgbe_aci_opc_clear_port_alt_write		= 0x0906,
+
+	/* debug commands */
+	ixgbe_aci_opc_debug_dump_internals		= 0xFF08,
+
+	/* SystemDiagnostic commands */
+	ixgbe_aci_opc_set_health_status_config		= 0xFF20,
+	ixgbe_aci_opc_get_supported_health_status_codes	= 0xFF21,
+	ixgbe_aci_opc_get_health_status			= 0xFF22,
+	ixgbe_aci_opc_clear_health_status		= 0xFF23,
+};
+
+/* Get version (direct 0x0001) */
+struct ixgbe_aci_cmd_get_ver {
+	u32 rom_ver;
+	u32 fw_build;
+	u8 fw_branch;
+	u8 fw_major;
+	u8 fw_minor;
+	u8 fw_patch;
+	u8 api_branch;
+	u8 api_major;
+	u8 api_minor;
+	u8 api_patch;
+};
+
+#define IXGBE_DRV_VER_STR_LEN_E610	32
+
+/* Send driver version (indirect 0x0002) */
+struct ixgbe_aci_cmd_driver_ver {
+	u8 major_ver;
+	u8 minor_ver;
+	u8 build_ver;
+	u8 subbuild_ver;
+	u8 reserved[4];
+	u32 addr_high;
+	u32 addr_low;
+};
+
+/* Get Expanded Error Code (0x0005, direct) */
+struct ixgbe_aci_cmd_get_exp_err {
+	u32 reason;
+#define IXGBE_ACI_EXPANDED_ERROR_NOT_PROVIDED	0xFFFFFFFF
+	u32 identifier;
+	u8 rsvd[8];
+};
+
+/* FW update timeout definitions are in milliseconds */
+#define IXGBE_NVM_TIMEOUT		180000
+
+enum ixgbe_aci_res_access_type {
+	IXGBE_RES_READ = 1,
+	IXGBE_RES_WRITE
+};
+
+enum ixgbe_aci_res_ids {
+	IXGBE_NVM_RES_ID = 1,
+	IXGBE_SPD_RES_ID,
+	IXGBE_CHANGE_LOCK_RES_ID,
+	IXGBE_GLOBAL_CFG_LOCK_RES_ID
+};
+
+/* Request resource ownership (direct 0x0008)
+ * Release resource ownership (direct 0x0009)
+ */
+struct ixgbe_aci_cmd_req_res {
+	u16 res_id;
+	u16 access_type;
+
+	/* Upon successful completion, FW writes this value and driver is
+	 * expected to release resource before timeout. This value is provided
+	 * in milliseconds.
+	 */
+	u32 timeout;
+#define IXGBE_ACI_RES_NVM_READ_DFLT_TIMEOUT_MS	3000
+#define IXGBE_ACI_RES_NVM_WRITE_DFLT_TIMEOUT_MS	180000
+#define IXGBE_ACI_RES_CHNG_LOCK_DFLT_TIMEOUT_MS	1000
+#define IXGBE_ACI_RES_GLBL_LOCK_DFLT_TIMEOUT_MS	3000
+	/* For SDP: pin ID of the SDP */
+	u32 res_number;
+	u16 status;
+#define IXGBE_ACI_RES_GLBL_SUCCESS		0
+#define IXGBE_ACI_RES_GLBL_IN_PROG		1
+#define IXGBE_ACI_RES_GLBL_DONE			2
+	u8 reserved[2];
+};
+
+/* Get function capabilities (indirect 0x000A)
+ * Get device capabilities (indirect 0x000B)
+ */
+struct ixgbe_aci_cmd_list_caps {
+	u8 cmd_flags;
+	u8 pf_index;
+	u8 reserved[2];
+	u32 count;
+	u32 addr_high;
+	u32 addr_low;
+};
+
+/* Device/Function buffer entry, repeated per reported capability */
+struct ixgbe_aci_cmd_list_caps_elem {
+	u16 cap;
+#define IXGBE_ACI_CAPS_VALID_FUNCTIONS			0x0005
+#define IXGBE_ACI_MAX_VALID_FUNCTIONS			0x8
+#define IXGBE_ACI_CAPS_SRIOV				0x0012
+#define IXGBE_ACI_CAPS_VF				0x0013
+#define IXGBE_ACI_CAPS_VMDQ				0x0014
+#define IXGBE_ACI_CAPS_VSI				0x0017
+#define IXGBE_ACI_CAPS_DCB				0x0018
+#define IXGBE_ACI_CAPS_RSS				0x0040
+#define IXGBE_ACI_CAPS_RXQS				0x0041
+#define IXGBE_ACI_CAPS_TXQS				0x0042
+#define IXGBE_ACI_CAPS_MSIX				0x0043
+#define IXGBE_ACI_CAPS_FD				0x0045
+#define IXGBE_ACI_CAPS_1588				0x0046
+#define IXGBE_ACI_CAPS_MAX_MTU				0x0047
+#define IXGBE_ACI_CAPS_NVM_VER				0x0048
+#define IXGBE_ACI_CAPS_PENDING_NVM_VER			0x0049
+#define IXGBE_ACI_CAPS_OROM_VER				0x004A
+#define IXGBE_ACI_CAPS_PENDING_OROM_VER			0x004B
+#define IXGBE_ACI_CAPS_PENDING_NET_VER			0x004D
+#define IXGBE_ACI_CAPS_INLINE_IPSEC			0x0070
+#define IXGBE_ACI_CAPS_NUM_ENABLED_PORTS		0x0072
+#define IXGBE_ACI_CAPS_PCIE_RESET_AVOIDANCE		0x0076
+#define IXGBE_ACI_CAPS_POST_UPDATE_RESET_RESTRICT	0x0077
+#define IXGBE_ACI_CAPS_NVM_MGMT				0x0080
+#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG0		0x0081
+#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG1		0x0082
+#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG2		0x0083
+#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG3		0x0084
+	u8 major_ver;
+	u8 minor_ver;
+	/* Number of resources described by this capability */
+	u32 number;
+	/* Only meaningful for some types of resources */
+	u32 logical_id;
+	/* Only meaningful for some types of resources */
+	u32 phys_id;
+	u64 rsvd1;
+	u64 rsvd2;
+};
+
+/* Disable RXEN (direct 0x000C) */
+struct ixgbe_aci_cmd_disable_rxen {
+	u8 lport_num;
+	u8 reserved[15];
+};
+
+/* Get PHY capabilities (indirect 0x0600) */
+struct ixgbe_aci_cmd_get_phy_caps {
+	u8 lport_num;
+	u8 reserved;
+	u16 param0;
+	/* 18.0 - Report qualified modules */
+#define IXGBE_ACI_GET_PHY_RQM		BIT(0)
+	/* 18.1 - 18.3 : Report mode
+	 * 000b - Report topology capabilities, without media
+	 * 001b - Report topology capabilities, with media
+	 * 010b - Report Active configuration
+	 * 011b - Report PHY Type and FEC mode capabilities
+	 * 100b - Report Default capabilities
+	 */
+#define IXGBE_ACI_REPORT_MODE_M			GENMASK(3, 1)
+#define IXGBE_ACI_REPORT_TOPO_CAP_NO_MEDIA	0
+#define IXGBE_ACI_REPORT_TOPO_CAP_MEDIA		BIT(1)
+#define IXGBE_ACI_REPORT_ACTIVE_CFG		BIT(2)
+#define IXGBE_ACI_REPORT_DFLT_CFG		BIT(3)
+	u32 reserved1;
+	u32 addr_high;
+	u32 addr_low;
+};
+
+/* This is #define of PHY type (Extended):
+ * The first set of defines is for phy_type_low.
+ */
+#define IXGBE_PHY_TYPE_LOW_100BASE_TX		BIT_ULL(0)
+#define IXGBE_PHY_TYPE_LOW_100M_SGMII		BIT_ULL(1)
+#define IXGBE_PHY_TYPE_LOW_1000BASE_T		BIT_ULL(2)
+#define IXGBE_PHY_TYPE_LOW_1000BASE_SX		BIT_ULL(3)
+#define IXGBE_PHY_TYPE_LOW_1000BASE_LX		BIT_ULL(4)
+#define IXGBE_PHY_TYPE_LOW_1000BASE_KX		BIT_ULL(5)
+#define IXGBE_PHY_TYPE_LOW_1G_SGMII		BIT_ULL(6)
+#define IXGBE_PHY_TYPE_LOW_2500BASE_T		BIT_ULL(7)
+#define IXGBE_PHY_TYPE_LOW_2500BASE_X		BIT_ULL(8)
+#define IXGBE_PHY_TYPE_LOW_2500BASE_KX		BIT_ULL(9)
+#define IXGBE_PHY_TYPE_LOW_5GBASE_T		BIT_ULL(10)
+#define IXGBE_PHY_TYPE_LOW_5GBASE_KR		BIT_ULL(11)
+#define IXGBE_PHY_TYPE_LOW_10GBASE_T		BIT_ULL(12)
+#define IXGBE_PHY_TYPE_LOW_10G_SFI_DA		BIT_ULL(13)
+#define IXGBE_PHY_TYPE_LOW_10GBASE_SR		BIT_ULL(14)
+#define IXGBE_PHY_TYPE_LOW_10GBASE_LR		BIT_ULL(15)
+#define IXGBE_PHY_TYPE_LOW_10GBASE_KR_CR1	BIT_ULL(16)
+#define IXGBE_PHY_TYPE_LOW_10G_SFI_AOC_ACC	BIT_ULL(17)
+#define IXGBE_PHY_TYPE_LOW_10G_SFI_C2C		BIT_ULL(18)
+#define IXGBE_PHY_TYPE_LOW_25GBASE_T		BIT_ULL(19)
+#define IXGBE_PHY_TYPE_LOW_25GBASE_CR		BIT_ULL(20)
+#define IXGBE_PHY_TYPE_LOW_25GBASE_CR_S		BIT_ULL(21)
+#define IXGBE_PHY_TYPE_LOW_25GBASE_CR1		BIT_ULL(22)
+#define IXGBE_PHY_TYPE_LOW_25GBASE_SR		BIT_ULL(23)
+#define IXGBE_PHY_TYPE_LOW_25GBASE_LR		BIT_ULL(24)
+#define IXGBE_PHY_TYPE_LOW_25GBASE_KR		BIT_ULL(25)
+#define IXGBE_PHY_TYPE_LOW_25GBASE_KR_S		BIT_ULL(26)
+#define IXGBE_PHY_TYPE_LOW_25GBASE_KR1		BIT_ULL(27)
+#define IXGBE_PHY_TYPE_LOW_25G_AUI_AOC_ACC	BIT_ULL(28)
+#define IXGBE_PHY_TYPE_LOW_25G_AUI_C2C		BIT_ULL(29)
+#define IXGBE_PHY_TYPE_LOW_MAX_INDEX		29
+/* The second set of defines is for phy_type_high. */
+#define IXGBE_PHY_TYPE_HIGH_10BASE_T		BIT_ULL(1)
+#define IXGBE_PHY_TYPE_HIGH_10M_SGMII		BIT_ULL(2)
+#define IXGBE_PHY_TYPE_HIGH_2500M_SGMII		BIT_ULL(56)
+#define IXGBE_PHY_TYPE_HIGH_100M_USXGMII	BIT_ULL(57)
+#define IXGBE_PHY_TYPE_HIGH_1G_USXGMII		BIT_ULL(58)
+#define IXGBE_PHY_TYPE_HIGH_2500M_USXGMII	BIT_ULL(59)
+#define IXGBE_PHY_TYPE_HIGH_5G_USXGMII		BIT_ULL(60)
+#define IXGBE_PHY_TYPE_HIGH_10G_USXGMII		BIT_ULL(61)
+#define IXGBE_PHY_TYPE_HIGH_MAX_INDEX		61
+
+struct ixgbe_aci_cmd_get_phy_caps_data {
+	u64 phy_type_low; /* Use values from IXGBE_PHY_TYPE_LOW_* */
+	u64 phy_type_high; /* Use values from IXGBE_PHY_TYPE_HIGH_* */
+	u8 caps;
+#define IXGBE_ACI_PHY_EN_TX_LINK_PAUSE			BIT(0)
+#define IXGBE_ACI_PHY_EN_RX_LINK_PAUSE			BIT(1)
+#define IXGBE_ACI_PHY_LOW_POWER_MODE			BIT(2)
+#define IXGBE_ACI_PHY_EN_LINK				BIT(3)
+#define IXGBE_ACI_PHY_AN_MODE				BIT(4)
+#define IXGBE_ACI_PHY_EN_MOD_QUAL			BIT(5)
+#define IXGBE_ACI_PHY_EN_LESM				BIT(6)
+#define IXGBE_ACI_PHY_EN_AUTO_FEC			BIT(7)
+#define IXGBE_ACI_PHY_CAPS_MASK				GENMASK(7, 0)
+	u8 low_power_ctrl_an;
+#define IXGBE_ACI_PHY_EN_D3COLD_LOW_POWER_AUTONEG	BIT(0)
+#define IXGBE_ACI_PHY_AN_EN_CLAUSE28			BIT(1)
+#define IXGBE_ACI_PHY_AN_EN_CLAUSE73			BIT(2)
+#define IXGBE_ACI_PHY_AN_EN_CLAUSE37			BIT(3)
+	u16 eee_cap;
+#define IXGBE_ACI_PHY_EEE_EN_100BASE_TX			BIT(0)
+#define IXGBE_ACI_PHY_EEE_EN_1000BASE_T			BIT(1)
+#define IXGBE_ACI_PHY_EEE_EN_10GBASE_T			BIT(2)
+#define IXGBE_ACI_PHY_EEE_EN_1000BASE_KX		BIT(3)
+#define IXGBE_ACI_PHY_EEE_EN_10GBASE_KR			BIT(4)
+#define IXGBE_ACI_PHY_EEE_EN_25GBASE_KR			BIT(5)
+#define IXGBE_ACI_PHY_EEE_EN_10BASE_T			BIT(11)
+	u16 eeer_value;
+	u8 phy_id_oui[4]; /* PHY/Module ID connected on the port */
+	u8 phy_fw_ver[8];
+	u8 link_fec_options;
+#define IXGBE_ACI_PHY_FEC_10G_KR_40G_KR4_EN		BIT(0)
+#define IXGBE_ACI_PHY_FEC_10G_KR_40G_KR4_REQ		BIT(1)
+#define IXGBE_ACI_PHY_FEC_25G_RS_528_REQ		BIT(2)
+#define IXGBE_ACI_PHY_FEC_25G_KR_REQ			BIT(3)
+#define IXGBE_ACI_PHY_FEC_25G_RS_544_REQ		BIT(4)
+#define IXGBE_ACI_PHY_FEC_25G_RS_CLAUSE91_EN		BIT(6)
+#define IXGBE_ACI_PHY_FEC_25G_KR_CLAUSE74_EN		BIT(7)
+#define IXGBE_ACI_PHY_FEC_MASK				0xdf
+	u8 module_compliance_enforcement;
+#define IXGBE_ACI_MOD_ENFORCE_STRICT_MODE		BIT(0)
+	u8 extended_compliance_code;
+#define IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE		3
+	u8 module_type[IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE];
+#define IXGBE_ACI_MOD_TYPE_BYTE0_SFP_PLUS		0xA0
+#define IXGBE_ACI_MOD_TYPE_BYTE0_QSFP_PLUS		0x80
+#define IXGBE_ACI_MOD_TYPE_IDENT			1
+#define IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_PASSIVE	BIT(0)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_ACTIVE	BIT(1)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_SR		BIT(4)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_LR		BIT(5)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_LRM		BIT(6)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_ER		BIT(7)
+#define IXGBE_ACI_MOD_TYPE_BYTE2_SFP_PLUS		0xA0
+#define IXGBE_ACI_MOD_TYPE_BYTE2_QSFP_PLUS		0x86
+	u8 qualified_module_count;
+	u8 rsvd2[7];	/* Bytes 47:41 reserved */
+#define IXGBE_ACI_QUAL_MOD_COUNT_MAX			16
+	struct {
+		u8 v_oui[3];
+		u8 rsvd3;
+		u8 v_part[16];
+		u32 v_rev;
+		u64 rsvd4;
+	} qual_modules[IXGBE_ACI_QUAL_MOD_COUNT_MAX];
+};
+
+/* Set PHY capabilities (direct 0x0601)
+ * NOTE: This command must be followed by setup link and restart auto-neg
+ */
+struct ixgbe_aci_cmd_set_phy_cfg {
+	u8 lport_num;
+	u8 reserved[7];
+	u32 addr_high;
+	u32 addr_low;
+};
+
+/* Set PHY config command data structure */
+struct ixgbe_aci_cmd_set_phy_cfg_data {
+	u64 phy_type_low; /* Use values from IXGBE_PHY_TYPE_LOW_* */
+	u64 phy_type_high; /* Use values from IXGBE_PHY_TYPE_HIGH_* */
+	u8 caps;
+#define IXGBE_ACI_PHY_ENA_VALID_MASK		0xef
+#define IXGBE_ACI_PHY_ENA_TX_PAUSE_ABILITY	BIT(0)
+#define IXGBE_ACI_PHY_ENA_RX_PAUSE_ABILITY	BIT(1)
+#define IXGBE_ACI_PHY_ENA_LOW_POWER		BIT(2)
+#define IXGBE_ACI_PHY_ENA_LINK			BIT(3)
+#define IXGBE_ACI_PHY_ENA_AUTO_LINK_UPDT	BIT(5)
+#define IXGBE_ACI_PHY_ENA_LESM			BIT(6)
+#define IXGBE_ACI_PHY_ENA_AUTO_FEC		BIT(7)
+	u8 low_power_ctrl_an;
+	u16 eee_cap; /* Value from ixgbe_aci_get_phy_caps */
+	u16 eeer_value; /* Use defines from ixgbe_aci_get_phy_caps */
+	u8 link_fec_opt; /* Use defines from ixgbe_aci_get_phy_caps */
+	u8 module_compliance_enforcement;
+};
+
+/* Restart AN command data structure (direct 0x0605)
+ * Also used for response, with only the lport_num field present.
+ */
+struct ixgbe_aci_cmd_restart_an {
+	u8 lport_num;
+	u8 reserved;
+	u8 cmd_flags;
+#define IXGBE_ACI_RESTART_AN_LINK_RESTART	BIT(1)
+#define IXGBE_ACI_RESTART_AN_LINK_ENABLE	BIT(2)
+	u8 reserved2[13];
+};
+
+/* Get link status (indirect 0x0607), also used for Link Status Event */
+struct ixgbe_aci_cmd_get_link_status {
+	u8 lport_num;
+	u8 reserved;
+	u16 cmd_flags;
+#define IXGBE_ACI_LSE_M				GENMASK(1, 0)
+#define IXGBE_ACI_LSE_NOP			0x0
+#define IXGBE_ACI_LSE_DIS			0x2
+#define IXGBE_ACI_LSE_ENA			0x3
+	/* only response uses this flag */
+#define IXGBE_ACI_LSE_IS_ENABLED		0x1
+	u32 reserved2;
+	u32 addr_high;
+	u32 addr_low;
+};
+
+/* Get link status response data structure, also used for Link Status Event */
+struct ixgbe_aci_cmd_get_link_status_data {
+	u8 topo_media_conflict;
+#define IXGBE_ACI_LINK_TOPO_CONFLICT		BIT(0)
+#define IXGBE_ACI_LINK_MEDIA_CONFLICT		BIT(1)
+#define IXGBE_ACI_LINK_TOPO_CORRUPT		BIT(2)
+#define IXGBE_ACI_LINK_TOPO_UNREACH_PRT		BIT(4)
+#define IXGBE_ACI_LINK_TOPO_UNDRUTIL_PRT	BIT(5)
+#define IXGBE_ACI_LINK_TOPO_UNDRUTIL_MEDIA	BIT(6)
+#define IXGBE_ACI_LINK_TOPO_UNSUPP_MEDIA	BIT(7)
+	u8 link_cfg_err;
+#define IXGBE_ACI_LINK_CFG_ERR				BIT(0)
+#define IXGBE_ACI_LINK_CFG_COMPLETED			BIT(1)
+#define IXGBE_ACI_LINK_ACT_PORT_OPT_INVAL		BIT(2)
+#define IXGBE_ACI_LINK_FEAT_ID_OR_CONFIG_ID_INVAL	BIT(3)
+#define IXGBE_ACI_LINK_TOPO_CRITICAL_SDP_ERR		BIT(4)
+#define IXGBE_ACI_LINK_MODULE_POWER_UNSUPPORTED		BIT(5)
+#define IXGBE_ACI_LINK_EXTERNAL_PHY_LOAD_FAILURE	BIT(6)
+#define IXGBE_ACI_LINK_INVAL_MAX_POWER_LIMIT		BIT(7)
+	u8 link_info;
+#define IXGBE_ACI_LINK_UP		BIT(0)	/* Link Status */
+#define IXGBE_ACI_LINK_FAULT		BIT(1)
+#define IXGBE_ACI_LINK_FAULT_TX		BIT(2)
+#define IXGBE_ACI_LINK_FAULT_RX		BIT(3)
+#define IXGBE_ACI_LINK_FAULT_REMOTE	BIT(4)
+#define IXGBE_ACI_LINK_UP_PORT		BIT(5)	/* External Port Link Status */
+#define IXGBE_ACI_MEDIA_AVAILABLE	BIT(6)
+#define IXGBE_ACI_SIGNAL_DETECT		BIT(7)
+	u8 an_info;
+#define IXGBE_ACI_AN_COMPLETED		BIT(0)
+#define IXGBE_ACI_LP_AN_ABILITY		BIT(1)
+#define IXGBE_ACI_PD_FAULT		BIT(2)	/* Parallel Detection Fault */
+#define IXGBE_ACI_FEC_EN		BIT(3)
+#define IXGBE_ACI_PHY_LOW_POWER		BIT(4)	/* Low Power State */
+#define IXGBE_ACI_LINK_PAUSE_TX		BIT(5)
+#define IXGBE_ACI_LINK_PAUSE_RX		BIT(6)
+#define IXGBE_ACI_QUALIFIED_MODULE	BIT(7)
+	u8 ext_info;
+#define IXGBE_ACI_LINK_PHY_TEMP_ALARM	BIT(0)
+#define IXGBE_ACI_LINK_EXCESSIVE_ERRORS	BIT(1)	/* Excessive Link Errors */
+	/* Port Tx Suspended */
+#define IXGBE_ACI_LINK_TX_ACTIVE	0
+#define IXGBE_ACI_LINK_TX_DRAINED	1
+#define IXGBE_ACI_LINK_TX_FLUSHED	3
+	u8 lb_status;
+#define IXGBE_ACI_LINK_LB_PHY_LCL	BIT(0)
+#define IXGBE_ACI_LINK_LB_PHY_RMT	BIT(1)
+#define IXGBE_ACI_LINK_LB_MAC_LCL	BIT(2)
+	u16 max_frame_size;
+	u8 cfg;
+#define IXGBE_ACI_LINK_25G_KR_FEC_EN		BIT(0)
+#define IXGBE_ACI_LINK_25G_RS_528_FEC_EN	BIT(1)
+#define IXGBE_ACI_LINK_25G_RS_544_FEC_EN	BIT(2)
+#define IXGBE_ACI_FEC_MASK			GENMASK(2, 0)
+	/* Pacing Config */
+#define IXGBE_ACI_CFG_PACING_M		GENMASK(6, 3)
+#define IXGBE_ACI_CFG_PACING_TYPE_M	BIT(7)
+#define IXGBE_ACI_CFG_PACING_TYPE_AVG	0
+#define IXGBE_ACI_CFG_PACING_TYPE_FIXED	IXGBE_ACI_CFG_PACING_TYPE_M
+	/* External Device Power Ability */
+	u8 power_desc;
+#define IXGBE_ACI_PWR_CLASS_M			GENMASK(5, 0)
+#define IXGBE_ACI_LINK_PWR_BASET_LOW_HIGH	0
+#define IXGBE_ACI_LINK_PWR_BASET_HIGH		1
+#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_1		0
+#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_2		1
+#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_3		2
+#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_4		3
+	u16 link_speed;
+#define IXGBE_ACI_LINK_SPEED_M			GENMASK(10, 0)
+#define IXGBE_ACI_LINK_SPEED_10MB		BIT(0)
+#define IXGBE_ACI_LINK_SPEED_100MB		BIT(1)
+#define IXGBE_ACI_LINK_SPEED_1000MB		BIT(2)
+#define IXGBE_ACI_LINK_SPEED_2500MB		BIT(3)
+#define IXGBE_ACI_LINK_SPEED_5GB		BIT(4)
+#define IXGBE_ACI_LINK_SPEED_10GB		BIT(5)
+#define IXGBE_ACI_LINK_SPEED_20GB		BIT(6)
+#define IXGBE_ACI_LINK_SPEED_25GB		BIT(7)
+#define IXGBE_ACI_LINK_SPEED_40GB		BIT(8)
+#define IXGBE_ACI_LINK_SPEED_50GB		BIT(9)
+#define IXGBE_ACI_LINK_SPEED_100GB		BIT(10)
+#define IXGBE_ACI_LINK_SPEED_200GB		BIT(11)
+#define IXGBE_ACI_LINK_SPEED_UNKNOWN		BIT(15)
+	u32 reserved3; /* Aligns next field to 8-byte boundary */
+	u8 ext_fec_status;
+#define IXGBE_ACI_LINK_RS_272_FEC_EN	BIT(0) /* RS 272 FEC enabled */
+	u8 reserved4;
+	u64 phy_type_low; /* Use values from ICE_PHY_TYPE_LOW_* */
+	u64 phy_type_high; /* Use values from ICE_PHY_TYPE_HIGH_* */
+	/* Get link status version 2 link partner data */
+	u64 lp_phy_type_low; /* Use values from ICE_PHY_TYPE_LOW_* */
+	u64 lp_phy_type_high; /* Use values from ICE_PHY_TYPE_HIGH_* */
+	u8 lp_fec_adv;
+#define IXGBE_ACI_LINK_LP_10G_KR_FEC_CAP	BIT(0)
+#define IXGBE_ACI_LINK_LP_25G_KR_FEC_CAP	BIT(1)
+#define IXGBE_ACI_LINK_LP_RS_528_FEC_CAP	BIT(2)
+#define IXGBE_ACI_LINK_LP_50G_KR_272_FEC_CAP	BIT(3)
+#define IXGBE_ACI_LINK_LP_100G_KR_272_FEC_CAP	BIT(4)
+#define IXGBE_ACI_LINK_LP_200G_KR_272_FEC_CAP	BIT(5)
+	u8 lp_fec_req;
+#define IXGBE_ACI_LINK_LP_10G_KR_FEC_REQ	BIT(0)
+#define IXGBE_ACI_LINK_LP_25G_KR_FEC_REQ	BIT(1)
+#define IXGBE_ACI_LINK_LP_RS_528_FEC_REQ	BIT(2)
+#define IXGBE_ACI_LINK_LP_KR_272_FEC_REQ	BIT(3)
+	u8 lp_flowcontrol;
+#define IXGBE_ACI_LINK_LP_PAUSE_ADV		BIT(0)
+#define IXGBE_ACI_LINK_LP_ASM_DIR_ADV		BIT(1)
+} __packed;
+
+/* Set event mask command (direct 0x0613) */
+struct ixgbe_aci_cmd_set_event_mask {
+	u8	lport_num;
+	u8	reserved[7];
+	u16	event_mask;
+#define IXGBE_ACI_LINK_EVENT_UPDOWN		BIT(1)
+#define IXGBE_ACI_LINK_EVENT_MEDIA_NA		BIT(2)
+#define IXGBE_ACI_LINK_EVENT_LINK_FAULT		BIT(3)
+#define IXGBE_ACI_LINK_EVENT_PHY_TEMP_ALARM	BIT(4)
+#define IXGBE_ACI_LINK_EVENT_EXCESSIVE_ERRORS	BIT(5)
+#define IXGBE_ACI_LINK_EVENT_SIGNAL_DETECT	BIT(6)
+#define IXGBE_ACI_LINK_EVENT_AN_COMPLETED	BIT(7)
+#define IXGBE_ACI_LINK_EVENT_MODULE_QUAL_FAIL	BIT(8)
+#define IXGBE_ACI_LINK_EVENT_PORT_TX_SUSPENDED	BIT(9)
+#define IXGBE_ACI_LINK_EVENT_TOPO_CONFLICT	BIT(10)
+#define IXGBE_ACI_LINK_EVENT_MEDIA_CONFLICT	BIT(11)
+#define IXGBE_ACI_LINK_EVENT_PHY_FW_LOAD_FAIL	BIT(12)
+	u8	reserved1[6];
+};
+
+struct ixgbe_aci_cmd_link_topo_params {
+	u8 lport_num;
+	u8 lport_num_valid;
+#define IXGBE_ACI_LINK_TOPO_PORT_NUM_VALID	BIT(0)
+	u8 node_type_ctx;
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_M		GENMASK(3, 0)
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_PHY	0
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_GPIO_CTRL	1
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_MUX_CTRL	2
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_LED_CTRL	3
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_LED	4
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_THERMAL	5
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_CAGE	6
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_MEZZ	7
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_ID_EEPROM	8
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_CLK_CTRL	9
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_CLK_MUX	10
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_GPS	11
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_S		4
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_GLOBAL			0
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_BOARD			1
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_PORT			2
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_NODE			3
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_NODE_HANDLE		4
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_DIRECT_BUS_ACCESS		5
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_NODE_HANDLE_BUS_ADDRESS	6
+	u8 index;
+};
+
+struct ixgbe_aci_cmd_link_topo_addr {
+	struct ixgbe_aci_cmd_link_topo_params topo_params;
+	u16 handle;
+/* Used to decode the handle field */
+#define IXGBE_ACI_LINK_TOPO_HANDLE_BRD_TYPE_M		BIT(9)
+#define IXGBE_ACI_LINK_TOPO_HANDLE_BRD_TYPE_LOM		BIT(9)
+#define IXGBE_ACI_LINK_TOPO_HANDLE_BRD_TYPE_MEZZ	0
+};
+
+/* Get Link Topology Handle (direct, 0x06E0) */
+struct ixgbe_aci_cmd_get_link_topo {
+	struct ixgbe_aci_cmd_link_topo_addr addr;
+	u8 node_part_num;
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_PCA9575		0x21
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_ZL30632_80032	0x24
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_SI5384		0x25
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_C827		0x31
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_GEN_CLK_MUX	0x47
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_GEN_GPS		0x48
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_E610_PTC	0x49
+	u8 rsvd[9];
+};
+
+/* Get Link Topology Pin (direct, 0x06E1) */
+struct ixgbe_aci_cmd_get_link_topo_pin {
+	struct ixgbe_aci_cmd_link_topo_addr addr;
+	u8 input_io_params;
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_GPIO	0
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RESET_N	1
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_INT_N	2
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_PRESENT_N	3
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_TX_DIS	4
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_MODSEL_N	5
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_LPMODE	6
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_TX_FAULT	7
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RX_LOSS	8
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RS0		9
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RS1		10
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_EEPROM_WP	11
+/* 12 repeats intentionally due to two different uses depending on context */
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_LED		12
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_RED_LED	12
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_GREEN_LED	13
+#define IXGBE_ACI_LINK_TOPO_IO_FUNC_BLUE_LED	14
+#define IXGBE_ACI_LINK_TOPO_INPUT_IO_TYPE_GPIO	3
+/* Use IXGBE_ACI_LINK_TOPO_NODE_TYPE_* for the type values */
+	u8 output_io_params;
+/* Use IXGBE_ACI_LINK_TOPO_NODE_TYPE_* for the type values */
+	u8 output_io_flags;
+#define IXGBE_ACI_LINK_TOPO_OUTPUT_POLARITY	BIT(5)
+#define IXGBE_ACI_LINK_TOPO_OUTPUT_VALUE	BIT(6)
+#define IXGBE_ACI_LINK_TOPO_OUTPUT_DRIVEN	BIT(7)
+	u8 rsvd[7];
+};
+
+/* Read/Write SFF EEPROM command (indirect 0x06EE) */
+struct ixgbe_aci_cmd_sff_eeprom {
+	u8 lport_num;
+	u8 lport_num_valid;
+#define IXGBE_ACI_SFF_PORT_NUM_VALID		BIT(0)
+	u16 i2c_bus_addr;
+#define IXGBE_ACI_SFF_I2CBUS_7BIT_M		GENMASK(6, 0)
+#define IXGBE_ACI_SFF_I2CBUS_10BIT_M		GENMASK(9, 0)
+#define IXGBE_ACI_SFF_I2CBUS_TYPE_M		BIT(10)
+#define IXGBE_ACI_SFF_I2CBUS_TYPE_7BIT		0
+#define IXGBE_ACI_SFF_I2CBUS_TYPE_10BIT		IXGBE_ACI_SFF_I2CBUS_TYPE_M
+#define IXGBE_ACI_SFF_NO_PAGE_BANK_UPDATE	0
+#define IXGBE_ACI_SFF_UPDATE_PAGE		1
+#define IXGBE_ACI_SFF_UPDATE_BANK		2
+#define IXGBE_ACI_SFF_UPDATE_PAGE_BANK		3
+#define IXGBE_ACI_SFF_IS_WRITE			BIT(15)
+	u16 i2c_offset;
+	u8 module_bank;
+	u8 module_page;
+	u32 addr_high;
+	u32 addr_low;
+};
+
+/* NVM Read command (indirect 0x0701)
+ * NVM Erase commands (direct 0x0702)
+ * NVM Write commands (indirect 0x0703)
+ * NVM Write Activate commands (direct 0x0707)
+ * NVM Shadow RAM Dump commands (direct 0x0707)
+ */
+struct ixgbe_aci_cmd_nvm {
+#define IXGBE_ACI_NVM_MAX_OFFSET	0xFFFFFF
+	u16 offset_low;
+	u8 offset_high; /* For Write Activate offset_high is used as flags2 */
+	u8 cmd_flags;
+#define IXGBE_ACI_NVM_LAST_CMD		BIT(0)
+#define IXGBE_ACI_NVM_PCIR_REQ		BIT(0) /* Used by NVM Write reply */
+#define IXGBE_ACI_NVM_PRESERVE_ALL	BIT(1)
+#define IXGBE_ACI_NVM_ACTIV_SEL_NVM	BIT(3) /* Write Activate/SR Dump only */
+#define IXGBE_ACI_NVM_ACTIV_SEL_OROM	BIT(4)
+#define IXGBE_ACI_NVM_ACTIV_SEL_NETLIST	BIT(5)
+#define IXGBE_ACI_NVM_SPECIAL_UPDATE	BIT(6)
+#define IXGBE_ACI_NVM_REVERT_LAST_ACTIV	BIT(6) /* Write Activate only */
+#define IXGBE_ACI_NVM_FLASH_ONLY	BIT(7)
+#define IXGBE_ACI_NVM_RESET_LVL_M	GENMASK(1, 0) /* Write reply only */
+#define IXGBE_ACI_NVM_POR_FLAG		0
+#define IXGBE_ACI_NVM_PERST_FLAG	1
+#define IXGBE_ACI_NVM_EMPR_FLAG		2
+#define IXGBE_ACI_NVM_EMPR_ENA		BIT(0) /* Write Activate reply only */
+	/* For Write Activate, several flags are sent as part of a separate
+	 * flags2 field using a separate byte. For simplicity of the software
+	 * interface, we pass the flags as a 16 bit value so these flags are
+	 * all offset by 8 bits
+	 */
+#define IXGBE_ACI_NVM_ACTIV_REQ_EMPR	BIT(8) /* NVM Write Activate only */
+	u16 module_typeid;
+	u16 length;
+#define IXGBE_ACI_NVM_ERASE_LEN	0xFFFF
+	u32 addr_high;
+	u32 addr_low;
+};
+
+/* NVM Module_Type ID, needed offset and read_len for
+ * struct ixgbe_aci_cmd_nvm.
+ */
+#define IXGBE_ACI_NVM_START_POINT		0
+
+/* NVM Checksum Command (direct, 0x0706) */
+struct ixgbe_aci_cmd_nvm_checksum {
+	u8 flags;
+#define IXGBE_ACI_NVM_CHECKSUM_VERIFY	BIT(0)
+#define IXGBE_ACI_NVM_CHECKSUM_RECALC	BIT(1)
+	u8 rsvd;
+	u16 checksum; /* Used only by response */
+#define IXGBE_ACI_NVM_CHECKSUM_CORRECT	0xBABA
+	u8 rsvd2[12];
+};
+
+/**
+ * struct ixgbe_aci_desc - Admin Command (AC) descriptor
+ * @flags: IXGBE_ACI_FLAG_* flags
+ * @opcode: Admin command opcode
+ * @datalen: length in bytes of indirect/external data buffer
+ * @retval: return value from firmware
+ * @cookie_high: opaque data high-half
+ * @cookie_low: opaque data low-half
+ * @params: command-specific parameters
+ *
+ * Descriptor format for commands the driver posts via the
+ * Admin Command Interface (ACI).
+ * The firmware writes back onto the command descriptor and returns
+ * the result of the command. Asynchronous events that are not an immediate
+ * result of the command are written to the Admin Command Interface (ACI) using
+ * the same descriptor format. Descriptors are in little-endian notation with
+ * 32-bit words.
+ */
+struct ixgbe_aci_desc {
+	u16 flags;
+	u16 opcode;
+	u16 datalen;
+	u16 retval;
+	u32 cookie_high;
+	u32 cookie_low;
+	union {
+		u8 raw[16];
+		struct ixgbe_aci_cmd_get_ver get_ver;
+		struct ixgbe_aci_cmd_driver_ver driver_ver;
+		struct ixgbe_aci_cmd_get_exp_err exp_err;
+		struct ixgbe_aci_cmd_req_res res_owner;
+		struct ixgbe_aci_cmd_list_caps get_cap;
+		struct ixgbe_aci_cmd_disable_rxen disable_rxen;
+		struct ixgbe_aci_cmd_get_phy_caps get_phy;
+		struct ixgbe_aci_cmd_set_phy_cfg set_phy;
+		struct ixgbe_aci_cmd_restart_an restart_an;
+		struct ixgbe_aci_cmd_get_link_status get_link_status;
+		struct ixgbe_aci_cmd_set_event_mask set_event_mask;
+		struct ixgbe_aci_cmd_get_link_topo get_link_topo;
+		struct ixgbe_aci_cmd_get_link_topo_pin get_link_topo_pin;
+		struct ixgbe_aci_cmd_sff_eeprom read_write_sff_param;
+		struct ixgbe_aci_cmd_nvm nvm;
+		struct ixgbe_aci_cmd_nvm_checksum nvm_checksum;
+	} params;
+};
+
+/* E610-specific adapter context structures */
+
+struct ixgbe_link_status {
+	/* Refer to ixgbe_aci_phy_type for bits definition */
+	u64 phy_type_low;
+	u64 phy_type_high;
+	u16 max_frame_size;
+	u16 link_speed;
+	u16 req_speeds;
+	u8 topo_media_conflict;
+	u8 link_cfg_err;
+	u8 lse_ena;	/* Link Status Event notification */
+	u8 link_info;
+	u8 an_info;
+	u8 ext_info;
+	u8 fec_info;
+	u8 pacing;
+	/* Refer to #define from module_type[IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE]
+	 * of ixgbe_aci_get_phy_caps structure
+	 */
+	u8 module_type[IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE];
+};
+
+/* Common HW capabilities for SW use */
+struct ixgbe_hw_caps {
+	/* Write CSR protection */
+	u64 wr_csr_prot;
+	u32 switching_mode;
+	/* switching mode supported - EVB switching (including cloud) */
+#define IXGBE_NVM_IMAGE_TYPE_EVB		0x0
+
+	/* Manageability mode & supported protocols over MCTP */
+	u32 mgmt_mode;
+#define IXGBE_MGMT_MODE_PASS_THRU_MODE_M	GENMASK(3, 0)
+#define IXGBE_MGMT_MODE_CTL_INTERFACE_M		GENMASK(7, 4)
+#define IXGBE_MGMT_MODE_REDIR_SB_INTERFACE_M	GENMASK(11, 8)
+
+	u32 mgmt_protocols_mctp;
+#define IXGBE_MGMT_MODE_PROTO_RSVD	BIT(0)
+#define IXGBE_MGMT_MODE_PROTO_PLDM	BIT(1)
+#define IXGBE_MGMT_MODE_PROTO_OEM	BIT(2)
+#define IXGBE_MGMT_MODE_PROTO_NC_SI	BIT(3)
+
+	u32 os2bmc;
+	u32 valid_functions;
+	/* DCB capabilities */
+	u32 active_tc_bitmap;
+	u32 maxtc;
+
+	/* RSS related capabilities */
+	u32 rss_table_size;		/* 512 for PFs and 64 for VFs */
+	u32 rss_table_entry_width;	/* RSS Entry width in bits */
+
+	/* Tx/Rx queues */
+	u32 num_rxq;			/* Number/Total Rx queues */
+	u32 rxq_first_id;		/* First queue ID for Rx queues */
+	u32 num_txq;			/* Number/Total Tx queues */
+	u32 txq_first_id;		/* First queue ID for Tx queues */
+
+	/* MSI-X vectors */
+	u32 num_msix_vectors;
+	u32 msix_vector_first_id;
+
+	/* Max MTU for function or device */
+	u32 max_mtu;
+
+	/* WOL related */
+	u32 num_wol_proxy_fltr;
+	u32 wol_proxy_vsi_seid;
+
+	/* LED/SDP pin count */
+	u32 led_pin_num;
+	u32 sdp_pin_num;
+
+	/* LED/SDP - Supports up to 12 LED pins and 8 SDP signals */
+#define IXGBE_MAX_SUPPORTED_GPIO_LED	12
+#define IXGBE_MAX_SUPPORTED_GPIO_SDP	8
+	u8 led[IXGBE_MAX_SUPPORTED_GPIO_LED];
+	u8 sdp[IXGBE_MAX_SUPPORTED_GPIO_SDP];
+	/* SR-IOV virtualization */
+	u8 sr_iov_1_1;			/* SR-IOV enabled */
+	/* VMDQ */
+	u8 vmdq;			/* VMDQ supported */
+
+	/* EVB capabilities */
+	u8 evb_802_1_qbg;		/* Edge Virtual Bridging */
+	u8 evb_802_1_qbh;		/* Bridge Port Extension */
+
+	u8 dcb;
+	u8 iscsi;
+	u8 ieee_1588;
+	u8 mgmt_cem;
+
+	/* WoL and APM support */
+#define IXGBE_WOL_SUPPORT_M		BIT(0)
+#define IXGBE_ACPI_PROG_MTHD_M		BIT(1)
+#define IXGBE_PROXY_SUPPORT_M		BIT(2)
+	u8 apm_wol_support;
+	u8 acpi_prog_mthd;
+	u8 proxy_support;
+	bool nvm_update_pending_nvm;
+	bool nvm_update_pending_orom;
+	bool nvm_update_pending_netlist;
+#define IXGBE_NVM_PENDING_NVM_IMAGE		BIT(0)
+#define IXGBE_NVM_PENDING_OROM			BIT(1)
+#define IXGBE_NVM_PENDING_NETLIST		BIT(2)
+	bool sec_rev_disabled;
+	bool update_disabled;
+	bool nvm_unified_update;
+	bool netlist_auth;
+#define IXGBE_NVM_MGMT_SEC_REV_DISABLED		BIT(0)
+#define IXGBE_NVM_MGMT_UPDATE_DISABLED		BIT(1)
+#define IXGBE_NVM_MGMT_UNIFIED_UPD_SUPPORT	BIT(3)
+#define IXGBE_NVM_MGMT_NETLIST_AUTH_SUPPORT	BIT(5)
+	bool no_drop_policy_support;
+	/* PCIe reset avoidance */
+	bool pcie_reset_avoidance; /* false: not supported, true: supported */
+	/* Post update reset restriction */
+	bool reset_restrict_support; /* false: not supported, true: supported */
+
+	/* External topology device images within the NVM */
+#define IXGBE_EXT_TOPO_DEV_IMG_COUNT	4
+	u32 ext_topo_dev_img_ver_high[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+	u32 ext_topo_dev_img_ver_low[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+	u8 ext_topo_dev_img_part_num[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+#define IXGBE_EXT_TOPO_DEV_IMG_PART_NUM_S	8
+#define IXGBE_EXT_TOPO_DEV_IMG_PART_NUM_M	GENMASK(15, 8)
+	bool ext_topo_dev_img_load_en[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+#define IXGBE_EXT_TOPO_DEV_IMG_LOAD_EN	BIT(0)
+	bool ext_topo_dev_img_prog_en[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+#define IXGBE_EXT_TOPO_DEV_IMG_PROG_EN	BIT(1)
+} __packed;
+
+/* Function specific capabilities */
+struct ixgbe_hw_func_caps {
+	u32 num_allocd_vfs;		/* Number of allocated VFs */
+	u32 vf_base_id;			/* Logical ID of the first VF */
+	u32 guar_num_vsi;
+	struct ixgbe_hw_caps common_cap;
+	bool no_drop_policy_ena;
+};
+
+/* Device wide capabilities */
+struct ixgbe_hw_dev_caps {
+	struct ixgbe_hw_caps common_cap;
+	u32 num_vfs_exposed;		/* Total number of VFs exposed */
+	u32 num_vsi_allocd_to_host;	/* Excluding EMP VSI */
+	u32 num_flow_director_fltr;	/* Number of FD filters available */
+	u32 num_funcs;
+};
+
+/* ACI event information */
+struct ixgbe_aci_event {
+	struct ixgbe_aci_desc desc;
+	u8 *msg_buf;
+	u16 msg_len;
+	u16 buf_len;
+};
+
+struct ixgbe_aci_info {
+	struct mutex lock;		/* admin command interface lock */
+	enum ixgbe_aci_err last_status;	/* last status of sent admin command */
+};
+
+/* Option ROM version information */
+struct ixgbe_orom_info {
+	u8 major;			/* Major version of OROM */
+	u8 patch;			/* Patch version of OROM */
+	u16 build;			/* Build version of OROM */
+	u32 srev;			/* Security revision */
+};
+
+/* NVM version information */
+struct ixgbe_nvm_info {
+	u32 eetrack;
+	u32 srev;
+	u8 major;
+	u8 minor;
+} __packed;
+
+/* netlist version information */
+struct ixgbe_netlist_info {
+	u32 major;			/* major high/low */
+	u32 minor;			/* minor high/low */
+	u32 type;			/* type high/low */
+	u32 rev;			/* revision high/low */
+	u32 hash;			/* SHA-1 hash word */
+	u16 cust_ver;			/* customer version */
+} __packed;
+
+/* Enumeration of possible flash banks for the NVM, OROM, and Netlist modules
+ * of the flash image.
+ */
+enum ixgbe_flash_bank {
+	IXGBE_INVALID_FLASH_BANK,
+	IXGBE_1ST_FLASH_BANK,
+	IXGBE_2ND_FLASH_BANK,
+};
+
+/* information for accessing NVM, OROM, and Netlist flash banks */
+struct ixgbe_bank_info {
+	u32 nvm_ptr;				/* Pointer to 1st NVM bank */
+	u32 nvm_size;				/* Size of NVM bank */
+	u32 orom_ptr;				/* Pointer to 1st OROM bank */
+	u32 orom_size;				/* Size of OROM bank */
+	u32 netlist_ptr;			/* Ptr to 1st Netlist bank */
+	u32 netlist_size;			/* Size of Netlist bank */
+	enum ixgbe_flash_bank nvm_bank;		/* Active NVM bank */
+	enum ixgbe_flash_bank orom_bank;	/* Active OROM bank */
+	enum ixgbe_flash_bank netlist_bank;	/* Active Netlist bank */
+};
+
+/* Flash Chip Information */
+struct ixgbe_flash_info {
+	struct ixgbe_orom_info orom;	/* Option ROM version info */
+	u32 flash_size;			/* Available flash size in bytes */
+	struct ixgbe_nvm_info nvm;	/* NVM version information */
+	struct ixgbe_netlist_info netlist;	/* Netlist version info */
+	struct ixgbe_bank_info banks;	/* Flash Bank information */
+	u16 sr_words;			/* Shadow RAM size in words */
+	u8 blank_nvm_mode;		/* is NVM empty (no FW present) */
+};
+
+#endif /* _IXGBE_TYPE_E610_H_ */
