From patchwork Fri Aug 9 09:16:15 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 13758582 Received: from metis.whiteo.stw.pengutronix.de (metis.whiteo.stw.pengutronix.de [185.203.201.7]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C446F191F8D for ; Fri, 9 Aug 2024 09:16:35 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.203.201.7 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723194998; cv=none; b=SGLtyH1HhFtG3/CIoaql2qD+qkTZ5SLXmAGx/QLN8UNFrHlDpQyDbzdIyFQjnehhtVIjmPbJ6nWLSkHvQhQUqJZa1Xz9Y2gW10ZHwy16/S/R6AnDNSWAbuu2GNs0jqwRsOGzBPjKrous/AN8L6l5F4b0FE6O3b/5uf3FrTfLe30= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1723194998; c=relaxed/simple; bh=NOIzZgJ9ouA+56D3176oWMYg8IaElVojJkIDJhZeD0Q=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=YIUuMJIE599mQEJhGRQL06ErXnSUm26hyVHRrN0O5sDJrazULiBhmnbTYKrh+qTJN1iApcN3wFpIXM9ipT/gyM+4Ymapfv61TjZRZBayqtDxRnz7jUB7EeB9F06o6Wnk9P5kuUaV0vMBCgGqGERmjBFDu0LBGtipzIcvuUDDyds= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de; spf=pass smtp.mailfrom=pengutronix.de; arc=none smtp.client-ip=185.203.201.7 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=pengutronix.de Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1scLjN-0002sg-7b; Fri, 09 Aug 2024 11:16:17 +0200 Received: from [2a0a:edc0:0:1101:1d::ac] (helo=dude04.red.stw.pengutronix.de) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1scLjM-005dEa-3n; Fri, 09 Aug 2024 11:16:16 +0200 Received: from ore by dude04.red.stw.pengutronix.de with local (Exim 4.96) (envelope-from ) id 1scLjM-00Epjq-07; Fri, 09 Aug 2024 11:16:16 +0200 From: Oleksij Rempel To: Maxime Coquelin , Alexandre Torgue , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: David Jander , Oleksij Rempel , kernel@pengutronix.de, linux-kernel@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, netdev@vger.kernel.org Subject: [PATCH v3 2/2] arm: dts: st: Add MECIO1 and MECT1S board variants Date: Fri, 9 Aug 2024 11:16:15 +0200 Message-Id: <20240809091615.3535447-2-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20240809091615.3535447-1-o.rempel@pengutronix.de> References: <20240809091615.3535447-1-o.rempel@pengutronix.de> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2a0a:edc0:0:c01:1d::a2 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.whiteo.stw.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: netdev@vger.kernel.org From: David Jander Introduce device tree support for the MECIO1 and MECT1S board variants. MECIO1 is an I/O and motor control board used in blood sample analysis machines. MECT1S is a 1000Base-T1 switch for internal machine networks of blood sample analysis machines. Signed-off-by: David Jander Signed-off-by: Oleksij Rempel --- changes v3: - convert all pin reconfiguration to &{label/subnode} format changes v2: - move stm32.yaml changes to a separate patch - remove switch reset for now. sja1105 validation should be fixed first --- arch/arm/boot/dts/st/Makefile | 3 + arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts | 48 ++ arch/arm/boot/dts/st/stm32mp151c-mect1s.dts | 290 ++++++++++ arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts | 48 ++ .../arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi | 527 ++++++++++++++++++ 5 files changed, 916 insertions(+) create mode 100644 arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts create mode 100644 arch/arm/boot/dts/st/stm32mp151c-mect1s.dts create mode 100644 arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts create mode 100644 arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile index 015903d09323f..eab3a9bd435f5 100644 --- a/arch/arm/boot/dts/st/Makefile +++ b/arch/arm/boot/dts/st/Makefile @@ -35,8 +35,11 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp151a-prtt1c.dtb \ stm32mp151a-prtt1s.dtb \ stm32mp151a-dhcor-testbench.dtb \ + stm32mp151c-mecio1r0.dtb \ + stm32mp151c-mect1s.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp153c-dhcor-drc-compact.dtb \ + stm32mp153c-mecio1r1.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ diff --git a/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts new file mode 100644 index 0000000000000..a5ea1431c3991 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp151c-mecio1r0.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include "stm32mp15x-mecio1-io.dtsi" +#include +#include +#include + +/ { + model = "Protonic MECIO1r0"; + compatible = "prt,mecio1r0", "st,stm32mp151"; + + led { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = ; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +ðernet0 { + assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL3_Q>; + assigned-clock-parents = <&rcc PLL3_Q>; + assigned-clock-rates = <125000000>; /* Clock PLL3 to 625Mhz in tf-a. */ + st,eth-clk-sel; +}; diff --git a/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts new file mode 100644 index 0000000000000..a1b8c3646e98b --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp151c-mect1s.dts @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander + */ +/dts-v1/; + +#include "stm32mp151.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include +#include +#include + +/ { + model = "Protonic MECT1S"; + compatible = "prt,mect1s", "st,stm32mp151"; + + chosen { + stdout-path = "serial0:1500000n8"; + }; + + aliases { + serial0 = &uart4; + ethernet0 = ðernet0; + ethernet1 = ðernet1; + ethernet2 = ðernet2; + ethernet3 = ðernet3; + ethernet4 = ðernet4; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v5v: regulator-v5v { + compatible = "regulator-fixed"; + regulator-name = "v5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = ; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <24000000>; +}; + +&clk_lse { + status = "disabled"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + st,eth-clk-sel; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + +&{ethernet0_rmii_pins_a/pins1} { + pinmux = , /* ETH1_RMII_TXD0 */ + , /* ETH1_RMII_TXD1 */ + , /* ETH1_RMII_TX_EN */ + , /* ETH1_MDIO */ + ; /* ETH1_MDC */ +}; + +&{ethernet0_rmii_pins_a/pins2} { + pinmux = , /* ETH1_RMII_RXD0 */ + , /* ETH1_RMII_RXD1 */ + , /* ETH1_RMII_REF_CLK input */ + ; /* ETH1_RMII_CRS_DV */ +}; + +&{ethernet0_rmii_sleep_pins_a/pins1} { + pinmux = , /* ETH1_RMII_TXD0 */ + , /* ETH1_RMII_TXD1 */ + , /* ETH1_RMII_TX_EN */ + , /* ETH1_RMII_RXD0 */ + , /* ETH1_RMII_RXD1 */ + , /* ETH1_RMII_REF_CLK */ + ; /* ETH1_RMII_CRS_DV */ +}; + +&mdio0 { + /* All this DP83TG720R PHYs can't be probed before switch@0 is + * probed so we need to use compatible with PHYid + */ + /* TI DP83TG720R */ + t1_phy0: ethernet-phy@8 { + compatible = "ethernet-phy-id2000.a284"; + reg = <8>; + interrupts-extended = <&gpioi 5 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 13 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy1: ethernet-phy@c { + compatible = "ethernet-phy-id2000.a284"; + reg = <12>; + interrupts-extended = <&gpioj 0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 14 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy2: ethernet-phy@4 { + compatible = "ethernet-phy-id2000.a284"; + reg = <4>; + interrupts-extended = <&gpioi 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + + /* TI DP83TG720R */ + t1_phy3: ethernet-phy@d { + compatible = "ethernet-phy-id2000.a284"; + reg = <13>; + interrupts-extended = <&gpioi 15 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioi 13 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&{qspi_bk1_pins_a/pins} { + /delete-property/ bias-disable; + bias-pull-up; + drive-push-pull; + slew-rate = <1>; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins_b>; + pinctrl-names = "default"; + cs-gpios = <&gpioj 3 GPIO_ACTIVE_LOW>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + spi-cpha; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet1: port@0 { + reg = <0>; + label = "t10"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy0>; + }; + + ethernet2: port@1 { + reg = <1>; + label = "t11"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy1>; + }; + + ethernet3: port@2 { + reg = <2>; + label = "t12"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy2>; + }; + + ethernet4: port@3 { + reg = <3>; + label = "t13"; + phy-mode = "rgmii-id"; + phy-handle = <&t1_phy3>; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <ðernet0>; + phy-mode = "rmii"; + + /* RGMII mode is not working properly, using RMII instead. */ + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usbh_ehci { + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + vbus-supply = <&v5v>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&v3v3>; +}; + +&usbphyc_port1 { + phy-supply = <&v3v3>; +}; diff --git a/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts new file mode 100644 index 0000000000000..16b814c19350c --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp153c-mecio1r1.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander + */ +/dts-v1/; + +#include "stm32mp153.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include "stm32mp15x-mecio1-io.dtsi" +#include +#include +#include + +/ { + model = "Protonic MECIO1r1"; + compatible = "prt,mecio1r1", "st,stm32mp153"; + + led { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; + }; + + led-1 { + color = ; + function = LED_FUNCTION_DEBUG; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&clk_hse { + clock-frequency = <24000000>; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_b>; + pinctrl-1 = <&m_can1_sleep_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi new file mode 100644 index 0000000000000..915ba2526f451 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi @@ -0,0 +1,527 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) Protonic Holland + * Author: David Jander + */ + +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include +#include + +/ { + chosen { + stdout-path = "serial0:1500000n8"; + }; + + aliases { + serial0 = &uart4; + ethernet0 = ðernet0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xC0000000 0x10000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v5v: regulator-v5v { + compatible = "regulator-fixed"; + regulator-name = "v5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&adc { + /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */ + pinctrl-0 = <&adc12_pins_mecsbc>; + pinctrl-names = "default"; + vdd-supply = <&v3v3>; + vdda-supply = <&v3v3>; + vref-supply = <&v3v3>; + status = "okay"; +}; + +&adc1 { + status = "okay"; + + channel@0 { + reg = <0>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <5000>; + label = "p24v_stp"; + }; + + channel@1 { + reg = <1>; + st,min-sample-time-ns = <5000>; + label = "p24v_hpdcm"; + }; + + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + label = "ain0"; + }; + + channel@3 { + reg = <3>; + st,min-sample-time-ns = <5000>; + label = "hpdcm1_i2"; + }; + + channel@5 { + reg = <5>; + st,min-sample-time-ns = <5000>; + label = "hpout1_i"; + }; + + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + label = "ain1"; + }; + + channel@9 { + reg = <9>; + st,min-sample-time-ns = <5000>; + label = "hpout0_i"; + }; + + channel@10 { + reg = <10>; + st,min-sample-time-ns = <5000>; + label = "phint0_ain"; + }; + + channel@13 { + reg = <13>; + st,min-sample-time-ns = <5000>; + label = "phint1_ain"; + }; + + channel@15 { + reg = <15>; + st,min-sample-time-ns = <5000>; + label = "hpdcm0_i1"; + }; + + channel@16 { + reg = <16>; + st,min-sample-time-ns = <5000>; + label = "lsin"; + }; + + channel@18 { + reg = <18>; + st,min-sample-time-ns = <5000>; + label = "hpdcm0_i2"; + }; + + channel@19 { + reg = <19>; + st,min-sample-time-ns = <5000>; + label = "hpdcm1_i1"; + }; +}; + +&adc2 { + status = "okay"; + + channel@2 { + reg = <2>; + /* 16.5 ck_cycles sampling time */ + st,min-sample-time-ns = <5000>; + label = "ain2"; + }; + + channel@6 { + reg = <6>; + st,min-sample-time-ns = <5000>; + label = "ain3"; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_x>; + pinctrl-1 = <ðernet0_rgmii_sleep_pins_x>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii-id"; + max-speed = <1000>; + phy-handle = <&phy0>; + st,eth-clk-sel; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@8 { + reg = <8>; + interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiog 10 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + }; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "STP_RESETN", "STP_ENABLEN", "HPOUT0", "HPOUT0_ALERTN"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_d_mecsbc>; +}; + +&gpioe { + gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "", + "", "", "HPOUT1_RESETN", + "LPOUT0", "LPOUT0_ALERTN", "GPOUT0_RESETN", + "LPOUT1", "LPOUT1_ALERTN", "GPOUT1_RESETN", + "LPOUT2", "LPOUT2_ALERTN", "GPOUT2_RESETN"; +}; + +&gpiof { + gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "GPOUT3_RESETN", + "LPOUT4", "LPOUT4_ALERTN", "GPOUT4_RESETN", + "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "LPOUT5", "LPOUT5_ALERTN", "", "LPOUT5_RESETN", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "", + "", "", "", "", + "GPIO0_RESETN", "", "", "", + "", "", "", ""; +}; + +&gpioi { + gpio-line-names = "", "", "", "", + "", "", "", "", + "HPDCM0_SLEEPN", "HPDCM1_SLEEPN", "GPIO1_RESETN", "", + "", "", "", ""; +}; + +&gpioj { + gpio-line-names = "HSIN10", "HSIN11", "HSIN12", "HSIN13", + "HSIN14", "HSIN15", "", "", + "", "", "", "", + "", "RTD_RESETN", "", ""; +}; + +&gpiok { + gpio-line-names = "", "", "HSIN0", "HSIN1", + "HSIN2", "HSIN3", "HSIN4", "HSIN5"; +}; + +&gpioz { + gpio-line-names = "", "", "", "HSIN6", + "HSIN7", "HSIN8", "HSIN9", ""; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; + status = "okay"; + + gpio0: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HSIN0_BIAS", "HSIN1_BIAS", "HSIN2_BIAS", "HSIN3_BIAS", + "", "", "HSIN_VREF0_LVL", "HSIN_VREF1_LVL", + "HSIN4_BIAS", "HSIN5_BIAS", "HSIN6_BIAS", "HSIN9_BIAS", + "", "", "", ""; + }; + + gpio1: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HSIN8_BIAS", "HSIN9_BIAS", "HSIN10_BIAS", "HSIN11_BIAS", + "", "", "HSIN_VREF2_LVL", "HSIN_VREF3_LVL", + "HSIN12_BIAS", "HSIN13_BIAS", "HSIN14_BIAS", "HSIN15_BIAS", + "", "", "LSIN8_BIAS", "LSIN9_BIAS"; + }; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <104000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&{qspi_bk1_pins_a/pins} { + pinmux = , /* QSPI_BK1_IO0 */ + , /* QSPI_BK1_IO1 */ + , /* QSPI_BK1_IO2 */ + ; /* QSPI_BK1_IO3 */ + /delete-property/ bias-disable; + bias-pull-up; +}; + +&timers1 { + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + hpdcm0_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm1_pins_mecio1>; + pinctrl-1 = <&pwm1_sleep_pins_mecio1>; + status = "okay"; + }; +}; + +&timers8 { + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + hpdcm1_pwm: pwm { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm8_pins_mecio1>; + pinctrl-1 = <&pwm8_sleep_pins_mecio1>; + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&{uart4_pins_a/pins1} { + pinmux = ; /* UART4_TX */ +}; + +&{uart4_pins_a/pins2} { + pinmux = ; /* UART4_RX */ + /delete-property/ bias-disable; + bias-pull-up; +}; + +&usbotg_hs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + vbus-supply = <&v5v>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&v3v3>; +}; + +&usbphyc_port1 { + phy-supply = <&v3v3>; +}; + +&pinctrl { + adc12_pins_mecsbc: adc12-ain-mecsbc-0 { + pins { + pinmux = , /* ADC1_INP2 */ + , /* ADC1_INP6 */ + , /* ADC2_INP2 */ + , /* ADC2_INP6 */ + , /* ADC1_INP16 */ + , /* ADC1_INP15 */ + , /* ADC1_INP18 */ + , /* ADC1_INP19 */ + , /* ADC1_INP3 */ + , /* ADC1_INP9 */ + , /* ADC1_INP5 */ + , /* ADC1_INP10 */ + ; /* ADC1_INP13 */ + }; + }; + + pinctrl_hog_d_mecsbc: hog-d-0 { + pins { + pinmux = ; /* STP_RESETn */ + bias-pull-up; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_pins_mecio1: pwm1-mecio1-0 { + pins { + pinmux = , /* TIM1_CH1 */ + ; /* TIM1_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_mecio1: pwm1-sleep-mecio1-0 { + pins { + pinmux = , /* TIM1_CH1 */ + ; /* TIM1_CH2 */ + }; + }; + + pwm8_pins_mecio1: pwm8-mecio1-0 { + pins { + pinmux = , /* TIM8_CH1 */ + ; /* TIM8_CH2 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm8_sleep_pins_mecio1: pwm8-sleep-mecio1-0 { + pins { + pinmux = , /* TIM8_CH1 */ + ; /* TIM8_CH2 */ + }; + }; + + ethernet0_rgmii_pins_x: rgmii-0 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + ; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = ; /* ETH_MDIO */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + bias-disable; + }; + }; + + ethernet0_rgmii_sleep_pins_x: rgmii-sleep-0 { + pins1 { + pinmux = , /* ETH_RGMII_CLK125 */ + , /* ETH_RGMII_GTX_CLK */ + , /* ETH_RGMII_TXD0 */ + , /* ETH_RGMII_TXD1 */ + , /* ETH_RGMII_TXD2 */ + , /* ETH_RGMII_TXD3 */ + , /* ETH_RGMII_TX_CTL */ + , /* ETH_MDIO */ + , /* ETH_MDC */ + , /* ETH_RGMII_RXD0 */ + , /* ETH_RGMII_RXD1 */ + , /* ETH_RGMII_RXD2 */ + , /* ETH_RGMII_RXD3 */ + , /* ETH_RGMII_RX_CLK */ + ; /* ETH_RGMII_RX_CTL */ + }; + }; +};