diff mbox series

[v3] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration

Message ID 20240812104142.2123970-1-o.rempel@pengutronix.de (mailing list archive)
State Not Applicable
Headers show
Series [v3] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Oleksij Rempel Aug. 12, 2024, 10:41 a.m. UTC 
Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
subnode name. The incorrect name caused the configuration to be
applied to the wrong subnode, resulting in QSPI not working properly.

Some additional changes was made:
- To avoid this kind of regression, all references to pin configuration
  nodes are now referenced directly using the format &{label/subnode}.
- /delete-property/ bias-disable; was added everywhere where bias-pull-up
  is used
- redundant properties like driver-push-pull are removed

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
changes v3:
- extend comment message
---
 arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts  |  12 +-
 arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts  | 108 +++++++---------
 arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi | 126 +++++++++----------
 arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts  |  16 +--
 4 files changed, 116 insertions(+), 146 deletions(-)

--
2.39.2

Comments

Alexandre TORGUE Aug. 30, 2024, 4:03 p.m. UTC | #1 
Hi Oleksij,

On 8/12/24 12:41, Oleksij Rempel wrote:
> Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
> subnode name. The incorrect name caused the configuration to be
> applied to the wrong subnode, resulting in QSPI not working properly.
> 
> Some additional changes was made:
> - To avoid this kind of regression, all references to pin configuration
>    nodes are now referenced directly using the format &{label/subnode}.
> - /delete-property/ bias-disable; was added everywhere where bias-pull-up
>    is used
> - redundant properties like driver-push-pull are removed
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> changes v3:
> - extend comment message
> ---
>   arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts  |  12 +-
>   arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts  | 108 +++++++---------
>   arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi | 126 +++++++++----------
>   arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts  |  16 +--
>   4 files changed, 116 insertions(+), 146 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
> index 75874eafde11e..8e1dd84e0c0a4 100644
> --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
> +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
> @@ -28,16 +28,12 @@ phy0: ethernet-phy@0 {
>   	};
>   };
>
...

Applied on stm32-next.

Thanks
Alex
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
index 75874eafde11e..8e1dd84e0c0a4 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
@@ -28,16 +28,12 @@  phy0: ethernet-phy@0 {
 	};
 };

-&pwm5_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
-	};
+&{pwm5_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
 };

-&pwm5_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
-	};
+&{pwm5_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
 };

 &timers5 {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
index c90d815f906b8..3b33b7093b686 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
@@ -168,52 +168,42 @@  &sdmmc2 {
 	status = "okay";
 };

-&sdmmc2_b4_od_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
-			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-			 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
-	};
+&{sdmmc2_b4_od_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+		 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+		 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+		 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
 };

-&sdmmc2_b4_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
-			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-			 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
-			 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-	};
+&{sdmmc2_b4_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+		 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+		 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+		 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+		 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
 };

-&sdmmc2_b4_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
-			 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
-			 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
-			 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
-			 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
-			 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
-	};
+&{sdmmc2_b4_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+		 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+		 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+		 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+		 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+		 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
 };

-&sdmmc2_d47_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
-			 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-			 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
-			 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
-	};
+&{sdmmc2_d47_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+		 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+		 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+		 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
 };

-&sdmmc2_d47_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
-			 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
-			 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
-			 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
-	};
+&{sdmmc2_d47_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+		 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+		 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+		 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
 };

 &sdmmc3 {
@@ -238,34 +228,28 @@  mmc@1 {
 	};
 };

-&sdmmc3_b4_od_pins_b {
-	pins1 {
-		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
-			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
-			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
-			 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
-	};
+&{sdmmc3_b4_od_pins_b/pins1} {
+	pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+		 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+		 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+		 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
 };

-&sdmmc3_b4_pins_b {
-	pins1 {
-		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
-			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
-			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
-			 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
-			 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
-	};
+&{sdmmc3_b4_pins_b/pins1} {
+	pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+		 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+		 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+		 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+		 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
 };

-&sdmmc3_b4_sleep_pins_b {
-	pins {
-		pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
-			 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
-			 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
-			 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
-			 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
-			 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
-	};
+&{sdmmc3_b4_sleep_pins_b/pins} {
+	pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+		 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+		 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+		 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+		 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+		 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
 };

 &spi1 {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
index 3938d357e198f..98a31c2b5d456 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
@@ -69,30 +69,27 @@  &ethernet0 {
 	status = "okay";
 };

-&ethernet0_rmii_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
-			 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
-			 <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
-			 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
-			 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK input */
-			 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
-	};
+&{ethernet0_rmii_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+		 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+		 <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
 };

-&ethernet0_rmii_sleep_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
-			 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
-			 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
-			 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
-			 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
-			 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
-			 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
-	};
+&{ethernet0_rmii_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+		 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+		 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK input */
+		 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+};
+
+&{ethernet0_rmii_sleep_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+		 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+		 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+		 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+		 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+		 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+		 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
 };

 &iwdg2 {
@@ -122,12 +119,11 @@  flash@0 {
 	};
 };

-&qspi_bk1_pins_a {
-	pins1 {
-		bias-pull-up;
-		drive-push-pull;
-		slew-rate = <1>;
-	};
+&{qspi_bk1_pins_a/pins} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+	drive-push-pull;
+	slew-rate = <1>;
 };

 &rng1 {
@@ -147,22 +143,24 @@  &sdmmc1 {
 	status = "okay";
 };

-&sdmmc1_b4_od_pins_a {
-	pins1 {
-		bias-pull-up;
-	};
-	pins2 {
-		bias-pull-up;
-	};
+&{sdmmc1_b4_od_pins_a/pins1} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
 };

-&sdmmc1_b4_pins_a {
-	pins1 {
-		bias-pull-up;
-	};
-	pins2 {
-		bias-pull-up;
-	};
+&{sdmmc1_b4_od_pins_a/pins2} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins1} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins2} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
 };

 &uart4 {
@@ -175,34 +173,30 @@  &uart4 {
 	status = "okay";
 };

-&uart4_idle_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-		bias-pull-up;
-	};
+&{uart4_idle_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
 };

-&uart4_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
-		bias-disable;
-		drive-push-pull;
-		slew-rate = <0>;
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-		bias-pull-up;
-	};
+&{uart4_idle_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+	/delete-property/ bias-disable;
+	bias-pull-up;
 };

-&uart4_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
-			<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
-	};
+&{uart4_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+	slew-rate = <0>;
+};
+
+&{uart4_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{uart4_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+		<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
 };

 &usbh_ehci {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
index ad25929e64e6e..b6be61b159e72 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
@@ -36,18 +36,14 @@  co2-sensor@62 {
 	};
 };

-&i2c1_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
-			 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
-	};
+&{i2c1_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+		 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
 };

-&i2c1_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
-			 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
-	};
+&{i2c1_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+		 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
 };

 &mdio0 {