@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/mii.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/phy.h>
#include <linux/processor.h>
#include <linux/property.h>
@@ -185,6 +186,8 @@
#define NXP_C45_SKB_CB(skb) ((struct nxp_c45_skb_cb *)(skb)->cb)
+#define TJA11XX_REVERSE_MODE BIT(0)
+
struct nxp_c45_phy;
struct nxp_c45_skb_cb {
@@ -1510,6 +1513,7 @@ static int nxp_c45_get_delays(struct phy_device *phydev)
static int nxp_c45_set_phy_mode(struct phy_device *phydev)
{
+ struct nxp_c45_phy *priv = phydev->priv;
int ret;
ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_ABILITIES);
@@ -1561,8 +1565,13 @@ static int nxp_c45_set_phy_mode(struct phy_device *phydev)
phydev_err(phydev, "rmii mode not supported\n");
return -EINVAL;
}
- phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
- MII_BASIC_CONFIG_RMII);
+
+ if (priv->flags & TJA11XX_REVERSE_MODE)
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
+ MII_BASIC_CONFIG_RMII | MII_BASIC_CONFIG_REV);
+ else
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_MII_BASIC_CONFIG,
+ MII_BASIC_CONFIG_RMII);
break;
case PHY_INTERFACE_MODE_SGMII:
if (!(ret & SGMII_ABILITY)) {
@@ -1623,6 +1632,20 @@ static int nxp_c45_get_features(struct phy_device *phydev)
return genphy_c45_pma_read_abilities(phydev);
}
+static int nxp_c45_parse_dt(struct phy_device *phydev)
+{
+ struct device_node *node = phydev->mdio.dev.of_node;
+ struct nxp_c45_phy *priv = phydev->priv;
+
+ if (!IS_ENABLED(CONFIG_OF_MDIO))
+ return 0;
+
+ if (of_property_read_bool(node, "nxp,reverse-mode"))
+ priv->flags |= TJA11XX_REVERSE_MODE;
+
+ return 0;
+}
+
static int nxp_c45_probe(struct phy_device *phydev)
{
struct nxp_c45_phy *priv;
@@ -1642,6 +1665,8 @@ static int nxp_c45_probe(struct phy_device *phydev)
phydev->priv = priv;
+ nxp_c45_parse_dt(phydev);
+
mutex_init(&priv->ptp_lock);
phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1,
@@ -28,6 +28,7 @@ struct nxp_c45_phy {
int extts_index;
bool extts;
struct nxp_c45_macsec *macsec;
+ u32 flags;
};
#if IS_ENABLED(CONFIG_MACSEC)
For TJA11xx PHYs, they have the capability to make REF_CLK as output in RMII mode, which is called revRMII mode in the data sheet, so add the revRMII mode support. Signed-off-by: Wei Fang <wei.fang@nxp.com> --- drivers/net/phy/nxp-c45-tja11xx.c | 29 +++++++++++++++++++++++++++-- drivers/net/phy/nxp-c45-tja11xx.h | 1 + 2 files changed, 28 insertions(+), 2 deletions(-)