Message ID | 20240819-airoha-eth-wan-mac-addr-v1-1-e8d7c13b3182@kernel.org (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | [net-next] net: airoha: configure hw mac address according to the port id | expand |
On 8/19/2024 4:10 AM, Lorenzo Bianconi wrote: > GDM1 port on EN7581 SoC is connected to the lan dsa switch. > GDM{2,3,4} can be used as wan port connected to an external > phy module. Configure hw mac address registers according to the port id. > > --- > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > --- Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
On Mon, 19 Aug 2024 13:10:09 +0200 Lorenzo Bianconi wrote: > GDM1 port on EN7581 SoC is connected to the lan dsa switch. > GDM{2,3,4} can be used as wan port connected to an external > phy module. Configure hw mac address registers according to the port id. > > --- > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> nit: sign-off under --- > drivers/net/ethernet/mediatek/airoha_eth.c | 33 +++++++++++++++++++++++------- > 1 file changed, 26 insertions(+), 7 deletions(-) > > diff --git a/drivers/net/ethernet/mediatek/airoha_eth.c b/drivers/net/ethernet/mediatek/airoha_eth.c > index 1fb46db0c1e9..4914565c2fac 100644 > --- a/drivers/net/ethernet/mediatek/airoha_eth.c > +++ b/drivers/net/ethernet/mediatek/airoha_eth.c > @@ -67,6 +67,10 @@ > #define FE_RST_GDM3_MBI_ARB_MASK BIT(2) > #define FE_RST_CORE_MASK BIT(0) > > +#define REG_FE_WAN_MAC_H 0x0030 > +#define REG_FE_WAN_MAC_LMIN 0x0034 > +#define REG_FE_WAN_MAC_LMAX 0x0038 > + > #define REG_FE_LAN_MAC_H 0x0040 > #define REG_FE_LAN_MAC_LMIN 0x0044 > #define REG_FE_LAN_MAC_LMAX 0x0048 Isn't it better to define the base address and offsets? #define REG_FE_MAC_BASE_WAN 0x0030 #define REG_FE_MAC_BASE_LAN 0x0040 #define REG_FE_MAC_OFF_H 0x00 #define REG_FE_MAC_OFF_LMIN 0x04 #define REG_FE_MAC_OFF_LMAX 0x08 Then you only need to select the base and the rest of the code won't have conditionals (marginally improving readability)
diff --git a/drivers/net/ethernet/mediatek/airoha_eth.c b/drivers/net/ethernet/mediatek/airoha_eth.c index 1fb46db0c1e9..4914565c2fac 100644 --- a/drivers/net/ethernet/mediatek/airoha_eth.c +++ b/drivers/net/ethernet/mediatek/airoha_eth.c @@ -67,6 +67,10 @@ #define FE_RST_GDM3_MBI_ARB_MASK BIT(2) #define FE_RST_CORE_MASK BIT(0) +#define REG_FE_WAN_MAC_H 0x0030 +#define REG_FE_WAN_MAC_LMIN 0x0034 +#define REG_FE_WAN_MAC_LMAX 0x0038 + #define REG_FE_LAN_MAC_H 0x0040 #define REG_FE_LAN_MAC_LMIN 0x0044 #define REG_FE_LAN_MAC_LMAX 0x0048 @@ -900,16 +904,31 @@ static void airoha_qdma_irq_disable(struct airoha_qdma *qdma, int index, airoha_qdma_set_irqmask(qdma, index, mask, 0); } -static void airoha_set_macaddr(struct airoha_eth *eth, const u8 *addr) +static bool airhoa_is_lan_gdm_port(struct airoha_gdm_port *port) { - u32 val; + /* GDM1 port on EN7581 SoC is connected to the lan dsa switch. + * GDM{2,3,4} can be used as wan port connected to an external + * phy module. + */ + return port->id == 1; +} + +static void airoha_set_macaddr(struct airoha_gdm_port *port, const u8 *addr) +{ + bool is_lan_port = airhoa_is_lan_gdm_port(port); + struct airoha_eth *eth = port->qdma->eth; + u32 val, reg; val = (addr[0] << 16) | (addr[1] << 8) | addr[2]; - airoha_fe_wr(eth, REG_FE_LAN_MAC_H, val); + reg = is_lan_port ? REG_FE_LAN_MAC_H : REG_FE_WAN_MAC_H; + airoha_fe_wr(eth, reg, val); val = (addr[3] << 16) | (addr[4] << 8) | addr[5]; - airoha_fe_wr(eth, REG_FE_LAN_MAC_LMIN, val); - airoha_fe_wr(eth, REG_FE_LAN_MAC_LMAX, val); + reg = is_lan_port ? REG_FE_LAN_MAC_LMIN : REG_FE_WAN_MAC_LMIN; + airoha_fe_wr(eth, reg, val); + + reg = is_lan_port ? REG_FE_LAN_MAC_LMAX : REG_FE_WAN_MAC_LMAX; + airoha_fe_wr(eth, reg, val); } static void airoha_set_gdm_port_fwd_cfg(struct airoha_eth *eth, u32 addr, @@ -2340,7 +2359,7 @@ static int airoha_dev_set_macaddr(struct net_device *dev, void *p) if (err) return err; - airoha_set_macaddr(port->qdma->eth, dev->dev_addr); + airoha_set_macaddr(port, dev->dev_addr); return 0; } @@ -2349,7 +2368,7 @@ static int airoha_dev_init(struct net_device *dev) { struct airoha_gdm_port *port = netdev_priv(dev); - airoha_set_macaddr(port->qdma->eth, dev->dev_addr); + airoha_set_macaddr(port, dev->dev_addr); return 0; }
GDM1 port on EN7581 SoC is connected to the lan dsa switch. GDM{2,3,4} can be used as wan port connected to an external phy module. Configure hw mac address registers according to the port id. --- Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- drivers/net/ethernet/mediatek/airoha_eth.c | 33 +++++++++++++++++++++++------- 1 file changed, 26 insertions(+), 7 deletions(-) --- base-commit: a99ef548bba01435f19137cf1670861be1c1ee4b change-id: 20240819-airoha-eth-wan-mac-addr-0463b2bd89aa prerequisite-change-id: 20240705-for-6-11-bpf-a349efc08df8:v2 Best regards,