new file mode 100644
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/marvell,sd8787.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
+
+maintainers:
+ - Brian Norris <briannorris@chromium.org>
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ This node provides properties for describing the Marvell SDIO/PCIE wireless device.
+ The node is expected to be specified as a child node to the SDIO/PCIE controller that
+ connects the device to the system.
+
+properties:
+ compatible:
+ enum:
+ - marvell,sd8787
+ - marvell,sd8897
+ - marvell,sd8978
+ - marvell,sd8997
+ - nxp,iw416
+ - pci11ab,2b42
+ - pci1b4b,2b42
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source: true
+
+ marvell,caldata-txpwrlimit-2g:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for the 2GHz band.
+ maxItems: 566
+
+ marvell,caldata-txpwrlimit-5g-sub0:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for sub-band 0 in the 5GHz band.
+ maxItems: 502
+
+ marvell,caldata-txpwrlimit-5g-sub1:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for sub-band 1 in the 5GHz band.
+ maxItems: 688
+
+ marvell,caldata-txpwrlimit-5g-sub2:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for sub-band 2 in the 5GHz band.
+ maxItems: 750
+
+ marvell,caldata-txpwrlimit-5g-sub3:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: Calibration data for sub-band 3 in the 5GHz band.
+ maxItems: 502
+
+ marvell,wakeup-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Provides the pin number for the wakeup pin from the device's point of
+ view. The wakeup pin is used for the device to wake the host system
+ from sleep. This property is only necessary if the wakeup pin is
+ wired in a non-standard way, such that the default pin assignments
+ are invalid.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ mmc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "marvell,sd8897";
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+ marvell,wakeup-pin = <3>;
+ };
+ };
+
deleted file mode 100644
@@ -1,70 +0,0 @@
-Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
-------
-
-This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
-The node is expected to be specified as a child node to the SDIO/PCIE controller that
-connects the device to the system.
-
-Required properties:
-
- - compatible : should be one of the following:
- * "marvell,sd8787"
- * "marvell,sd8897"
- * "marvell,sd8978"
- * "marvell,sd8997"
- * "nxp,iw416"
- * "pci11ab,2b42"
- * "pci1b4b,2b42"
-
-Optional properties:
-
- - marvell,caldata* : A series of properties with marvell,caldata prefix,
- represent calibration data downloaded to the device during
- initialization. This is an array of unsigned 8-bit values.
- the properties should follow below property name and
- corresponding array length:
- "marvell,caldata-txpwrlimit-2g" (length = 566).
- "marvell,caldata-txpwrlimit-5g-sub0" (length = 502).
- "marvell,caldata-txpwrlimit-5g-sub1" (length = 688).
- "marvell,caldata-txpwrlimit-5g-sub2" (length = 750).
- "marvell,caldata-txpwrlimit-5g-sub3" (length = 502).
- - marvell,wakeup-pin : a wakeup pin number of wifi chip which will be configured
- to firmware. Firmware will wakeup the host using this pin
- during suspend/resume.
- - interrupts : interrupt pin number to the cpu. driver will request an irq based on
- this interrupt number. during system suspend, the irq will be enabled
- so that the wifi chip can wakeup host platform under certain condition.
- during system resume, the irq will be disabled to make sure
- unnecessary interrupt is not received.
- - vmmc-supply: a phandle of a regulator, supplying VCC to the card
- - mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*"
- for documentation of MMC power sequence bindings.
-
-Example:
-
-Tx power limit calibration data is configured in below example.
-The calibration data is an array of unsigned values, the length
-can vary between hw versions.
-IRQ pin 38 is used as system wakeup source interrupt. wakeup pin 3 is configured
-so that firmware can wakeup host using this device side pin.
-
-&mmc3 {
- vmmc-supply = <&wlan_en_reg>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- cap-power-off-card;
- keep-power-in-suspend;
-
- #address-cells = <1>;
- #size-cells = <0>;
- mwifiex: wifi@1 {
- compatible = "marvell,sd8897";
- reg = <1>;
- interrupt-parent = <&pio>;
- interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
-
- marvell,caldata_00_txpwrlimit_2g_cfg_set = /bits/ 8 <
- 0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01>;
- marvell,wakeup-pin = <3>;
- };
-};