@@ -12,6 +12,7 @@
#define PHY_ID_LAN87XX 0x0007c150
#define PHY_ID_LAN937X 0x0007c180
+#define PHY_ID_LAN887X 0x0007c1f0
/* External Register Control Register */
#define LAN87XX_EXT_REG_CTL (0x14)
@@ -94,8 +95,101 @@
/* SQI defines */
#define LAN87XX_MAX_SQI 0x07
+/* Chiptop registers */
+#define LAN887X_PMA_EXT_ABILITY_2 0x12
+#define LAN887X_PMA_EXT_ABILITY_2_1000T1 BIT(1)
+#define LAN887X_PMA_EXT_ABILITY_2_100T1 BIT(0)
+
+/* DSP 100M registers */
+#define LAN887x_CDR_CONFIG1_100 0x0405
+#define LAN887x_LOCK1_EQLSR_CONFIG_100 0x0411
+#define LAN887x_SLV_HD_MUFAC_CONFIG_100 0x0417
+#define LAN887x_PLOCK_MUFAC_CONFIG_100 0x041c
+#define LAN887x_PROT_DISABLE_100 0x0425
+#define LAN887x_KF_LOOP_SAT_CONFIG_100 0x0454
+
+/* DSP 1000M registers */
+#define LAN887X_LOCK1_EQLSR_CONFIG 0x0811
+#define LAN887X_LOCK3_EQLSR_CONFIG 0x0813
+#define LAN887X_PROT_DISABLE 0x0825
+#define LAN887X_FFE_GAIN6 0x0843
+#define LAN887X_FFE_GAIN7 0x0844
+#define LAN887X_FFE_GAIN8 0x0845
+#define LAN887X_FFE_GAIN9 0x0846
+#define LAN887X_ECHO_DELAY_CONFIG 0x08ec
+#define LAN887X_FFE_MAX_CONFIG 0x08ee
+
+/* PCS 1000M registers */
+#define LAN887X_SCR_CONFIG_3 0x8043
+#define LAN887X_INFO_FLD_CONFIG_5 0x8048
+
+/* T1 afe registers */
+#define LAN887X_ZQCAL_CONTROL_1 0x8080
+#define LAN887X_AFE_PORT_TESTBUS_CTRL2 0x8089
+#define LAN887X_AFE_PORT_TESTBUS_CTRL4 0x808b
+#define LAN887X_AFE_PORT_TESTBUS_CTRL6 0x808d
+#define LAN887X_TX_AMPLT_1000T1_REG 0x80b0
+#define LAN887X_INIT_COEFF_DFE1_100 0x0422
+
+/* PMA registers */
+#define LAN887X_DSP_PMA_CONTROL 0x810e
+#define LAN887X_DSP_PMA_CONTROL_LNK_SYNC BIT(4)
+
+/* PCS 100M registers */
+#define LAN887X_IDLE_ERR_TIMER_WIN 0x8204
+#define LAN887X_IDLE_ERR_CNT_THRESH 0x8213
+
+/* Misc registers */
+#define LAN887X_REG_REG26 0x001a
+#define LAN887X_REG_REG26_HW_INIT_SEQ_EN BIT(8)
+
+/* Mis registers */
+#define LAN887X_MIS_CFG_REG0 0xa00
+#define LAN887X_MIS_CFG_REG0_RCLKOUT_DIS BIT(5)
+#define LAN887X_MIS_CFG_REG0_MAC_MODE_SEL GENMASK(1, 0)
+
+#define LAN887X_MAC_MODE_RGMII 0x01
+#define LAN887X_MAC_MODE_SGMII 0x03
+
+#define LAN887X_MIS_DLL_CFG_REG0 0xa01
+#define LAN887X_MIS_DLL_CFG_REG1 0xa02
+
+#define LAN887X_MIS_DLL_DELAY_EN BIT(15)
+#define LAN887X_MIS_DLL_EN BIT(0)
+#define LAN887X_MIS_DLL_CONF (LAN887X_MIS_DLL_DELAY_EN |\
+ LAN887X_MIS_DLL_EN)
+
+#define LAN887X_MIS_CFG_REG2 0xa03
+#define LAN887X_MIS_CFG_REG2_FE_LPBK_EN BIT(2)
+
+#define LAN887X_MIS_PKT_STAT_REG0 0xa06
+#define LAN887X_MIS_PKT_STAT_REG1 0xa07
+#define LAN887X_MIS_PKT_STAT_REG3 0xa09
+#define LAN887X_MIS_PKT_STAT_REG4 0xa0a
+#define LAN887X_MIS_PKT_STAT_REG5 0xa0b
+#define LAN887X_MIS_PKT_STAT_REG6 0xa0c
+
+/* Chiptop common registers */
+#define LAN887X_COMMON_LED3_LED2 0xc05
+#define LAN887X_COMMON_LED2_MODE_SEL_MASK GENMASK(4, 0)
+#define LAN887X_LED_LINK_ACT_ANY_SPEED 0x0
+
+/* MX chip top registers */
+#define LAN887X_CHIP_SOFT_RST 0xf03f
+#define LAN887X_CHIP_SOFT_RST_RESET BIT(0)
+
+#define LAN887X_SGMII_CTL 0xf01a
+#define LAN887X_SGMII_CTL_SGMII_MUX_EN BIT(0)
+
+#define LAN887X_SGMII_PCS_CFG 0xf034
+#define LAN887X_SGMII_PCS_CFG_PCS_ENA BIT(9)
+
+#define LAN887X_EFUSE_READ_DAT9 0xf209
+#define LAN887X_EFUSE_READ_DAT9_SGMII_DIS BIT(9)
+#define LAN887X_EFUSE_READ_DAT9_MAC_MODE GENMASK(1, 0)
+
#define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>"
-#define DRIVER_DESC "Microchip LAN87XX/LAN937x T1 PHY driver"
+#define DRIVER_DESC "Microchip LAN87XX/LAN937x/LAN887x T1 PHY driver"
struct access_ereg_val {
u8 mode;
@@ -105,6 +199,32 @@ struct access_ereg_val {
u16 mask;
};
+struct lan887x_hw_stat {
+ const char *string;
+ u8 mmd;
+ u16 reg;
+ u8 bits;
+};
+
+static const struct lan887x_hw_stat lan887x_hw_stats[] = {
+ { "TX Good Count", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG0, 14},
+ { "RX Good Count", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG1, 14},
+ { "RX ERR Count detected by PCS", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG3, 16},
+ { "TX CRC ERR Count", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG4, 8},
+ { "RX CRC ERR Count", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG5, 8},
+ { "RX ERR Count for SGMII MII2GMII", MDIO_MMD_VEND1, LAN887X_MIS_PKT_STAT_REG6, 8},
+};
+
+struct lan887x_regwr_map {
+ u8 mmd;
+ u16 reg;
+ u16 val;
+};
+
+struct lan887x_priv {
+ u64 stats[ARRAY_SIZE(lan887x_hw_stats)];
+};
+
static int lan937x_dsp_workaround(struct phy_device *phydev, u16 ereg, u8 bank)
{
u8 prev_bank;
@@ -860,6 +980,446 @@ static int lan87xx_get_sqi_max(struct phy_device *phydev)
return LAN87XX_MAX_SQI;
}
+static int lan887x_rgmii_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* SGMII mux disable */
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ LAN887X_SGMII_CTL,
+ LAN887X_SGMII_CTL_SGMII_MUX_EN);
+ if (ret < 0)
+ return ret;
+
+ /* Select MAC_MODE as RGMII */
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_CFG_REG0,
+ LAN887X_MIS_CFG_REG0_MAC_MODE_SEL,
+ LAN887X_MAC_MODE_RGMII);
+ if (ret < 0)
+ return ret;
+
+ /* Disable PCS */
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ LAN887X_SGMII_PCS_CFG,
+ LAN887X_SGMII_PCS_CFG_PCS_ENA);
+ if (ret < 0)
+ return ret;
+
+ /* LAN887x Errata: RGMII rx clock active in SGMII mode
+ * Disabled it for SGMII mode
+ * Re-enabling it for RGMII mode
+ */
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ LAN887X_MIS_CFG_REG0,
+ LAN887X_MIS_CFG_REG0_RCLKOUT_DIS);
+}
+
+static int lan887x_sgmii_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* SGMII mux enable */
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ LAN887X_SGMII_CTL,
+ LAN887X_SGMII_CTL_SGMII_MUX_EN);
+ if (ret < 0)
+ return ret;
+
+ /* Select MAC_MODE as SGMII */
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_CFG_REG0,
+ LAN887X_MIS_CFG_REG0_MAC_MODE_SEL,
+ LAN887X_MAC_MODE_SGMII);
+ if (ret < 0)
+ return ret;
+
+ /* LAN887x Errata: RGMII rx clock active in SGMII mode.
+ * So disabling it for SGMII mode
+ */
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_CFG_REG0,
+ LAN887X_MIS_CFG_REG0_RCLKOUT_DIS);
+ if (ret < 0)
+ return ret;
+
+ /* Enable PCS */
+ return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, LAN887X_SGMII_PCS_CFG,
+ LAN887X_SGMII_PCS_CFG_PCS_ENA);
+}
+
+static int lan887x_config_rgmii_en(struct phy_device *phydev)
+{
+ int txc;
+ int rxc;
+ int ret;
+
+ ret = lan887x_rgmii_init(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Control bit to enable/disable TX DLL delay line in signal path */
+ txc = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_DLL_CFG_REG0);
+ if (txc < 0)
+ return txc;
+
+ /* Control bit to enable/disable RX DLL delay line in signal path */
+ rxc = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_DLL_CFG_REG1);
+ if (rxc < 0)
+ return rxc;
+
+ /* Configures the phy to enable RX/TX delay
+ * RGMII - TX & RX delays are either added by MAC or not needed,
+ * phy should not add
+ * RGMII_ID - Configures phy to enable TX & RX delays, MAC shouldn't add
+ * RGMII_RX_ID - Configures the PHY to enable the RX delay.
+ * The MAC shouldn't add the RX delay
+ * RGMII_TX_ID - Configures the PHY to enable the TX delay.
+ * The MAC shouldn't add the TX delay in this case
+ */
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ txc &= ~LAN887X_MIS_DLL_CONF;
+ rxc &= ~LAN887X_MIS_DLL_CONF;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ txc |= LAN887X_MIS_DLL_CONF;
+ rxc |= LAN887X_MIS_DLL_CONF;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ txc &= ~LAN887X_MIS_DLL_CONF;
+ rxc |= LAN887X_MIS_DLL_CONF;
+ break;
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ txc |= LAN887X_MIS_DLL_CONF;
+ rxc &= ~LAN887X_MIS_DLL_CONF;
+ break;
+ default:
+ WARN_ONCE(1, "Invalid phydev interface %d\n", phydev->interface);
+ return 0;
+ }
+
+ /* Configures the PHY to enable/disable RX delay in signal path */
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_DLL_CFG_REG1,
+ LAN887X_MIS_DLL_CONF, rxc);
+ if (ret < 0)
+ return ret;
+
+ /* Configures the PHY to enable/disable the TX delay in signal path */
+ return phy_modify_mmd(phydev, MDIO_MMD_VEND1, LAN887X_MIS_DLL_CFG_REG0,
+ LAN887X_MIS_DLL_CONF, txc);
+}
+
+static int lan887x_config_phy_interface(struct phy_device *phydev)
+{
+ int interface_mode;
+ int sgmii_dis;
+ int ret;
+
+ /* Read sku efuse data for interfaces supported by sku */
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_EFUSE_READ_DAT9);
+ if (ret < 0)
+ return ret;
+
+ /* If interface_mode is 1 then efuse sets RGMII operations.
+ * If interface mode is 3 then efuse sets SGMII operations.
+ */
+ interface_mode = ret & LAN887X_EFUSE_READ_DAT9_MAC_MODE;
+ /* SGMII disable is set for RGMII operations */
+ sgmii_dis = ret & LAN887X_EFUSE_READ_DAT9_SGMII_DIS;
+
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ /* Reject RGMII settings for SGMII only sku */
+ ret = -EOPNOTSUPP;
+
+ if (!((interface_mode & LAN887X_MAC_MODE_SGMII) ==
+ LAN887X_MAC_MODE_SGMII))
+ ret = lan887x_config_rgmii_en(phydev);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ /* Reject SGMII setting for RGMII only sku */
+ ret = -EOPNOTSUPP;
+
+ if (!sgmii_dis)
+ ret = lan887x_sgmii_init(phydev);
+ break;
+ default:
+ /* Reject setting for unsupported interfaces */
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+static int lan887x_get_features(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = genphy_c45_pma_read_abilities(phydev);
+ if (ret < 0)
+ return ret;
+
+ /* Enable twisted pair */
+ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported);
+
+ /* First patch only supports 100Mbps and 1000Mbps force-mode.
+ * T1 Auto-Negotiation (Clause 98 of IEEE 802.3) will be added later.
+ */
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+
+ return 0;
+}
+
+static int lan887x_phy_init(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Clear loopback */
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ LAN887X_MIS_CFG_REG2,
+ LAN887X_MIS_CFG_REG2_FE_LPBK_EN);
+ if (ret < 0)
+ return ret;
+
+ /* Configure default behavior of led to link and activity for any
+ * speed
+ */
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1,
+ LAN887X_COMMON_LED3_LED2,
+ LAN887X_COMMON_LED2_MODE_SEL_MASK,
+ LAN887X_LED_LINK_ACT_ANY_SPEED);
+ if (ret < 0)
+ return ret;
+
+ /* PHY interface setup */
+ return lan887x_config_phy_interface(phydev);
+}
+
+static int lan887x_phy_config(struct phy_device *phydev,
+ const struct lan887x_regwr_map *reg_map, int cnt)
+{
+ int ret;
+
+ for (int i = 0; i < cnt; i++) {
+ ret = phy_write_mmd(phydev, reg_map[i].mmd,
+ reg_map[i].reg, reg_map[i].val);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lan887x_phy_setup(struct phy_device *phydev)
+{
+ static const struct lan887x_regwr_map phy_cfg[] = {
+ /* PORT_AFE writes */
+ {MDIO_MMD_PMAPMD, LAN887X_ZQCAL_CONTROL_1, 0x4008},
+ {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL2, 0x0000},
+ {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL6, 0x0040},
+ /* 100T1_PCS_VENDOR writes */
+ {MDIO_MMD_PCS, LAN887X_IDLE_ERR_CNT_THRESH, 0x0008},
+ {MDIO_MMD_PCS, LAN887X_IDLE_ERR_TIMER_WIN, 0x800d},
+ /* 100T1 DSP writes */
+ {MDIO_MMD_VEND1, LAN887x_CDR_CONFIG1_100, 0x0ab1},
+ {MDIO_MMD_VEND1, LAN887x_LOCK1_EQLSR_CONFIG_100, 0x5274},
+ {MDIO_MMD_VEND1, LAN887x_SLV_HD_MUFAC_CONFIG_100, 0x0d74},
+ {MDIO_MMD_VEND1, LAN887x_PLOCK_MUFAC_CONFIG_100, 0x0aea},
+ {MDIO_MMD_VEND1, LAN887x_PROT_DISABLE_100, 0x0360},
+ {MDIO_MMD_VEND1, LAN887x_KF_LOOP_SAT_CONFIG_100, 0x0c30},
+ /* 1000T1 DSP writes */
+ {MDIO_MMD_VEND1, LAN887X_LOCK1_EQLSR_CONFIG, 0x2a78},
+ {MDIO_MMD_VEND1, LAN887X_LOCK3_EQLSR_CONFIG, 0x1368},
+ {MDIO_MMD_VEND1, LAN887X_PROT_DISABLE, 0x1354},
+ {MDIO_MMD_VEND1, LAN887X_FFE_GAIN6, 0x3C84},
+ {MDIO_MMD_VEND1, LAN887X_FFE_GAIN7, 0x3ca5},
+ {MDIO_MMD_VEND1, LAN887X_FFE_GAIN8, 0x3ca5},
+ {MDIO_MMD_VEND1, LAN887X_FFE_GAIN9, 0x3ca5},
+ {MDIO_MMD_VEND1, LAN887X_ECHO_DELAY_CONFIG, 0x0024},
+ {MDIO_MMD_VEND1, LAN887X_FFE_MAX_CONFIG, 0x227f},
+ /* 1000T1 PCS writes */
+ {MDIO_MMD_PCS, LAN887X_SCR_CONFIG_3, 0x1e00},
+ {MDIO_MMD_PCS, LAN887X_INFO_FLD_CONFIG_5, 0x0fa1},
+ };
+
+ return lan887x_phy_config(phydev, phy_cfg, ARRAY_SIZE(phy_cfg));
+}
+
+static int lan887x_100M_setup(struct phy_device *phydev)
+{
+ int ret;
+
+ /* (Re)configure the speed/mode dependent T1 settings */
+ if (phydev->master_slave_set == MASTER_SLAVE_CFG_MASTER_FORCE ||
+ phydev->master_slave_set == MASTER_SLAVE_CFG_MASTER_PREFERRED){
+ static const struct lan887x_regwr_map phy_cfg[] = {
+ {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL4, 0x00b8},
+ {MDIO_MMD_PMAPMD, LAN887X_TX_AMPLT_1000T1_REG, 0x0038},
+ {MDIO_MMD_VEND1, LAN887X_INIT_COEFF_DFE1_100, 0x000f},
+ };
+
+ ret = lan887x_phy_config(phydev, phy_cfg, ARRAY_SIZE(phy_cfg));
+ } else {
+ static const struct lan887x_regwr_map phy_cfg[] = {
+ {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL4, 0x0038},
+ {MDIO_MMD_VEND1, LAN887X_INIT_COEFF_DFE1_100, 0x0014},
+ };
+
+ ret = lan887x_phy_config(phydev, phy_cfg, ARRAY_SIZE(phy_cfg));
+ }
+ if (ret < 0)
+ return ret;
+
+ return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, LAN887X_REG_REG26,
+ LAN887X_REG_REG26_HW_INIT_SEQ_EN);
+}
+
+static int lan887x_1000M_setup(struct phy_device *phydev)
+{
+ static const struct lan887x_regwr_map phy_cfg[] = {
+ {MDIO_MMD_PMAPMD, LAN887X_TX_AMPLT_1000T1_REG, 0x003f},
+ {MDIO_MMD_PMAPMD, LAN887X_AFE_PORT_TESTBUS_CTRL4, 0x00b8},
+ };
+ int ret;
+
+ /* (Re)configure the speed/mode dependent T1 settings */
+ ret = lan887x_phy_config(phydev, phy_cfg, ARRAY_SIZE(phy_cfg));
+ if (ret < 0)
+ return ret;
+
+ return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, LAN887X_DSP_PMA_CONTROL,
+ LAN887X_DSP_PMA_CONTROL_LNK_SYNC);
+}
+
+static int lan887x_link_setup(struct phy_device *phydev)
+{
+ int ret = -EINVAL;
+
+ if (phydev->speed == SPEED_1000)
+ ret = lan887x_1000M_setup(phydev);
+ else if (phydev->speed == SPEED_100)
+ ret = lan887x_100M_setup(phydev);
+
+ return ret;
+}
+
+/* LAN887x Errata: speed configuration changes require soft reset
+ * and chip soft reset
+ */
+static int lan887x_phy_reset(struct phy_device *phydev)
+{
+ int ret, val;
+
+ /* Clear 1000M link sync */
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, LAN887X_DSP_PMA_CONTROL,
+ LAN887X_DSP_PMA_CONTROL_LNK_SYNC);
+ if (ret < 0)
+ return ret;
+
+ /* Clear 100M link sync */
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, LAN887X_REG_REG26,
+ LAN887X_REG_REG26_HW_INIT_SEQ_EN);
+ if (ret < 0)
+ return ret;
+
+ /* Chiptop soft-reset to allow the speed/mode change */
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, LAN887X_CHIP_SOFT_RST,
+ LAN887X_CHIP_SOFT_RST_RESET);
+ if (ret < 0)
+ return ret;
+
+ /* CL22 soft-reset to let the link re-train */
+ ret = phy_modify(phydev, MII_BMCR, BMCR_RESET, BMCR_RESET);
+ if (ret < 0)
+ return ret;
+
+ /* Wait for reset complete or timeout if > 10ms */
+ return phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
+ 5000, 10000, true);
+}
+
+static int lan887x_phy_reconfig(struct phy_device *phydev)
+{
+ int ret;
+
+ linkmode_zero(phydev->advertising);
+
+ ret = genphy_c45_pma_setup_forced(phydev);
+ if (ret < 0)
+ return ret;
+
+ return lan887x_link_setup(phydev);
+}
+
+static int lan887x_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* LAN887x Errata: speed configuration changes require soft reset
+ * and chip soft reset
+ */
+ ret = lan887x_phy_reset(phydev);
+ if (ret < 0)
+ return ret;
+
+ return lan887x_phy_reconfig(phydev);
+}
+
+static int lan887x_probe(struct phy_device *phydev)
+{
+ struct lan887x_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ return lan887x_phy_setup(phydev);
+}
+
+static u64 lan887x_get_stat(struct phy_device *phydev, int i)
+{
+ struct lan887x_hw_stat stat = lan887x_hw_stats[i];
+ struct lan887x_priv *priv = phydev->priv;
+ int val;
+ u64 ret;
+
+ if (stat.mmd)
+ val = phy_read_mmd(phydev, stat.mmd, stat.reg);
+ else
+ val = phy_read(phydev, stat.reg);
+
+ if (val < 0) {
+ ret = U64_MAX;
+ } else {
+ val = val & ((1 << stat.bits) - 1);
+ priv->stats[i] += val;
+ ret = priv->stats[i];
+ }
+
+ return ret;
+}
+
+static void lan887x_get_stats(struct phy_device *phydev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ for (int i = 0; i < ARRAY_SIZE(lan887x_hw_stats); i++)
+ data[i] = lan887x_get_stat(phydev, i);
+}
+
+static int lan887x_get_sset_count(struct phy_device *phydev)
+{
+ return ARRAY_SIZE(lan887x_hw_stats);
+}
+
+static void lan887x_get_strings(struct phy_device *phydev, u8 *data)
+{
+ for (int i = 0; i < ARRAY_SIZE(lan887x_hw_stats); i++)
+ ethtool_puts(&data, lan887x_hw_stats[i].string);
+}
+
static struct phy_driver microchip_t1_phy_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_LAN87XX),
@@ -894,6 +1454,20 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.get_sqi_max = lan87xx_get_sqi_max,
.cable_test_start = lan87xx_cable_test_start,
.cable_test_get_status = lan87xx_cable_test_get_status,
+ },
+ {
+ PHY_ID_MATCH_MODEL(PHY_ID_LAN887X),
+ .name = "Microchip LAN887x T1 PHY",
+ .probe = lan887x_probe,
+ .get_features = lan887x_get_features,
+ .config_init = lan887x_phy_init,
+ .config_aneg = lan887x_config_aneg,
+ .get_stats = lan887x_get_stats,
+ .get_sset_count = lan887x_get_sset_count,
+ .get_strings = lan887x_get_strings,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_status = genphy_c45_read_status,
}
};
@@ -902,6 +1476,7 @@ module_phy_driver(microchip_t1_phy_driver);
static struct mdio_device_id __maybe_unused microchip_t1_tbl[] = {
{ PHY_ID_MATCH_MODEL(PHY_ID_LAN87XX) },
{ PHY_ID_MATCH_MODEL(PHY_ID_LAN937X) },
+ { PHY_ID_MATCH_MODEL(PHY_ID_LAN887X) },
{ }
};