diff --git a/include/linux/timekeeper_internal.h b/include/linux/timekeeper_internal.h
index 84ff2844df2a..5805c5f61df4 100644
--- a/include/linux/timekeeper_internal.h
+++ b/include/linux/timekeeper_internal.h
@@ -26,7 +26,7 @@
  * occupies a single 64byte cache line.
  *
  * The struct is separate from struct timekeeper as it is also used
- * for a fast NMI safe accessors.
+ * for the fast NMI safe accessors.
  *
  * @base_real is for the fast NMI safe accessor to allow reading clock
  * realtime from any context.
@@ -44,33 +44,41 @@ struct tk_read_base {
 
 /**
  * struct timekeeper - Structure holding internal timekeeping values.
- * @tkr_mono:		The readout base structure for CLOCK_MONOTONIC
- * @tkr_raw:		The readout base structure for CLOCK_MONOTONIC_RAW
- * @xtime_sec:		Current CLOCK_REALTIME time in seconds
- * @ktime_sec:		Current CLOCK_MONOTONIC time in seconds
- * @wall_to_monotonic:	CLOCK_REALTIME to CLOCK_MONOTONIC offset
- * @offs_real:		Offset clock monotonic -> clock realtime
- * @offs_boot:		Offset clock monotonic -> clock boottime
- * @offs_tai:		Offset clock monotonic -> clock tai
- * @tai_offset:		The current UTC to TAI offset in seconds
- * @clock_was_set_seq:	The sequence number of clock was set events
- * @cs_was_changed_seq:	The sequence number of clocksource change events
- * @next_leap_ktime:	CLOCK_MONOTONIC time value of a pending leap-second
- * @raw_sec:		CLOCK_MONOTONIC_RAW  time in seconds
- * @monotonic_to_boot:	CLOCK_MONOTONIC to CLOCK_BOOTTIME offset
- * @cycle_interval:	Number of clock cycles in one NTP interval
- * @xtime_interval:	Number of clock shifted nano seconds in one NTP
- *			interval.
- * @xtime_remainder:	Shifted nano seconds left over when rounding
- *			@cycle_interval
- * @raw_interval:	Shifted raw nano seconds accumulated per NTP interval.
- * @ntp_error:		Difference between accumulated time and NTP time in ntp
- *			shifted nano seconds.
- * @ntp_error_shift:	Shift conversion between clock shifted nano seconds and
- *			ntp shifted nano seconds.
- * @last_warning:	Warning ratelimiter (DEBUG_TIMEKEEPING)
- * @underflow_seen:	Underflow warning flag (DEBUG_TIMEKEEPING)
- * @overflow_seen:	Overflow warning flag (DEBUG_TIMEKEEPING)
+ * @tkr_mono:			The readout base structure for CLOCK_MONOTONIC
+ * @xtime_sec:			Current CLOCK_REALTIME time in seconds
+ * @ktime_sec:			Current CLOCK_MONOTONIC time in seconds
+ * @wall_to_monotonic:		CLOCK_REALTIME to CLOCK_MONOTONIC offset
+ * @offs_real:			Offset clock monotonic -> clock realtime
+ * @offs_boot:			Offset clock monotonic -> clock boottime
+ * @offs_tai:			Offset clock monotonic -> clock tai
+ * @tai_offset:			The current UTC to TAI offset in seconds
+ * @tkr_raw:			The readout base structure for CLOCK_MONOTONIC_RAW
+ * @raw_sec:			CLOCK_MONOTONIC_RAW  time in seconds
+ * @clock_was_set_seq:		The sequence number of clock was set events
+ * @cs_was_changed_seq:		The sequence number of clocksource change events
+ * @monotonic_to_boot:		CLOCK_MONOTONIC to CLOCK_BOOTTIME offset
+ * @cycle_interval:		Number of clock cycles in one NTP interval
+ * @xtime_interval:		Number of clock shifted nano seconds in one NTP
+ *				interval.
+ * @xtime_remainder:		Shifted nano seconds left over when rounding
+ *				@cycle_interval
+ * @raw_interval:		Shifted raw nano seconds accumulated per NTP interval.
+ * @next_leap_ktime:		CLOCK_MONOTONIC time value of a pending leap-second
+ * @ntp_tick:			The ntp_tick_length() value currently being
+ *				used. This cached copy ensures we consistently
+ *				apply the tick length for an entire tick, as
+ *				ntp_tick_length may change mid-tick, and we don't
+ *				want to apply that new value to the tick in
+ *				progress.
+ * @ntp_error:			Difference between accumulated time and NTP time in ntp
+ *				shifted nano seconds.
+ * @ntp_error_shift:		Shift conversion between clock shifted nano seconds and
+ *				ntp shifted nano seconds.
+ * @ntp_err_mult:		Multiplication factor for scaled math conversion
+ * @skip_second_overflow:	Flag used to avoid updating NTP twice with same second
+ * @last_warning:		Warning ratelimiter (DEBUG_TIMEKEEPING)
+ * @underflow_seen:		Underflow warning flag (DEBUG_TIMEKEEPING)
+ * @overflow_seen:		Overflow warning flag (DEBUG_TIMEKEEPING)
  *
  * Note: For timespec(64) based interfaces wall_to_monotonic is what
  * we need to add to xtime (or xtime corrected for sub jiffie times)
@@ -88,10 +96,25 @@ struct tk_read_base {
  *
  * @monotonic_to_boottime is a timespec64 representation of @offs_boot to
  * accelerate the VDSO update for CLOCK_BOOTTIME.
+ *
+ * The cacheline ordering of the structure is optimized for in kernel usage
+ * of the ktime_get() and ktime_get_ts64() family of time accessors. Struct
+ * timekeeper is prepended in the core timekeeeping code with a sequence
+ * count, which results in the following cacheline layout:
+ *
+ * 0:	seqcount, tkr_mono
+ * 1:	xtime_sec ... tai_offset
+ * 2:	tkr_raw, raw_sec
+ * 3,4: Internal variables
+ *
+ * Cacheline 0,1 contain the data which is used for accessing
+ * CLOCK_MONOTONIC/REALTIME/BOOTTIME/TAI, while cacheline 2 contains the
+ * data for accessing CLOCK_MONOTONIC_RAW.  Cacheline 3,4 are internal
+ * variables which are only accessed during timekeeper updates once per
+ * tick.
  */
 struct timekeeper {
 	struct tk_read_base	tkr_mono;
-	struct tk_read_base	tkr_raw;
 	u64			xtime_sec;
 	unsigned long		ktime_sec;
 	struct timespec64	wall_to_monotonic;
@@ -99,31 +122,28 @@ struct timekeeper {
 	ktime_t			offs_boot;
 	ktime_t			offs_tai;
 	s32			tai_offset;
+
+	struct tk_read_base	tkr_raw;
+	u64			raw_sec;
+
+	/* The following members are for timekeeping internal use */
 	unsigned int		clock_was_set_seq;
 	u8			cs_was_changed_seq;
-	ktime_t			next_leap_ktime;
-	u64			raw_sec;
+
 	struct timespec64	monotonic_to_boot;
 
-	/* The following members are for timekeeping internal use */
 	u64			cycle_interval;
 	u64			xtime_interval;
 	s64			xtime_remainder;
 	u64			raw_interval;
-	/* The ntp_tick_length() value currently being used.
-	 * This cached copy ensures we consistently apply the tick
-	 * length for an entire tick, as ntp_tick_length may change
-	 * mid-tick, and we don't want to apply that new value to
-	 * the tick in progress.
-	 */
+
+	ktime_t			next_leap_ktime;
 	u64			ntp_tick;
-	/* Difference between accumulated time and NTP time in ntp
-	 * shifted nano seconds. */
 	s64			ntp_error;
 	u32			ntp_error_shift;
 	u32			ntp_err_mult;
-	/* Flag used to avoid updating NTP twice with same second */
 	u32			skip_second_overflow;
+
 #ifdef CONFIG_DEBUG_TIMEKEEPING
 	long			last_warning;
 	/*
