| Message ID | 20241022055223.382277-7-wei.fang@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | add basic support for i.MX95 NETC | expand |
On Tue, Oct 22, 2024 at 01:52:16PM +0800, Wei Fang wrote: > Compile enetc_pf_common.c as a standalone module to allow shared usage > between ENETC v1 and v4 PF drivers. Add struct enetc_pf_ops to register > different hardware operation interfaces for both ENETC v1 and v4 PF > drivers. > > Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> > --- > v2 changes: > This patch is separated from v1 patch 5 ("net: enetc: add enetc-pf-common > driver support"), only the changes to compile enetc_pf_common.c into a > separated driver are kept. > v3 changes: > Refactor the commit message. > v4 changes: Remove the input prompt of CONFIG_NXP_ENETC_PF_COMMON. > --- > drivers/net/ethernet/freescale/enetc/Kconfig | 9 ++++ > drivers/net/ethernet/freescale/enetc/Makefile | 5 +- > .../net/ethernet/freescale/enetc/enetc_pf.c | 26 ++++++++-- > .../net/ethernet/freescale/enetc/enetc_pf.h | 21 ++++++-- > .../freescale/enetc/enetc_pf_common.c | 50 ++++++++++++++++--- > 5 files changed, 96 insertions(+), 15 deletions(-) > > diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/ethernet/freescale/enetc/Kconfig > index 51d80ea959d4..e1b151a98b41 100644 > --- a/drivers/net/ethernet/freescale/enetc/Kconfig > +++ b/drivers/net/ethernet/freescale/enetc/Kconfig > @@ -7,6 +7,14 @@ config FSL_ENETC_CORE > > If compiled as module (M), the module name is fsl-enetc-core. > > +config NXP_ENETC_PF_COMMON > + tristate > + help > + This module supports common functionality between drivers of > + different versions of NXP ENETC PF controllers. > + > + If compiled as module (M), the module name is nxp-enetc-pf-common. > + > config FSL_ENETC > tristate "ENETC PF driver" > depends on PCI_MSI > @@ -14,6 +22,7 @@ config FSL_ENETC > select FSL_ENETC_CORE > select FSL_ENETC_IERB > select FSL_ENETC_MDIO > + select NXP_ENETC_PF_COMMON > select PHYLINK > select PCS_LYNX > select DIMLIB > diff --git a/drivers/net/ethernet/freescale/enetc/Makefile b/drivers/net/ethernet/freescale/enetc/Makefile > index 8f4d8e9c37a0..ebe232673ed4 100644 > --- a/drivers/net/ethernet/freescale/enetc/Makefile > +++ b/drivers/net/ethernet/freescale/enetc/Makefile > @@ -3,8 +3,11 @@ > obj-$(CONFIG_FSL_ENETC_CORE) += fsl-enetc-core.o > fsl-enetc-core-y := enetc.o enetc_cbdr.o enetc_ethtool.o > > +obj-$(CONFIG_NXP_ENETC_PF_COMMON) += nxp-enetc-pf-common.o > +nxp-enetc-pf-common-y := enetc_pf_common.o > + > obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o > -fsl-enetc-y := enetc_pf.o enetc_pf_common.o > +fsl-enetc-y := enetc_pf.o > fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o > fsl-enetc-$(CONFIG_FSL_ENETC_QOS) += enetc_qos.o > > diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c > index 3cdd149056f9..7522316ddfea 100644 > --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c > +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c > @@ -11,7 +11,7 @@ > > #define ENETC_DRV_NAME_STR "ENETC PF driver" > > -void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr) > +static void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr) > { > u32 upper = __raw_readl(hw->port + ENETC_PSIPMAR0(si)); > u16 lower = __raw_readw(hw->port + ENETC_PSIPMAR1(si)); > @@ -20,8 +20,8 @@ void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr) > put_unaligned_le16(lower, addr + 4); > } > > -void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si, > - const u8 *addr) > +static void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si, > + const u8 *addr) > { > u32 upper = get_unaligned_le32(addr); > u16 lower = get_unaligned_le16(addr + 4); > @@ -30,6 +30,17 @@ void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si, > __raw_writew(lower, hw->port + ENETC_PSIPMAR1(si)); > } > > +static struct phylink_pcs *enetc_pf_create_pcs(struct enetc_pf *pf, > + struct mii_bus *bus) > +{ > + return lynx_pcs_create_mdiodev(bus, 0); > +} > + > +static void enetc_pf_destroy_pcs(struct phylink_pcs *pcs) > +{ > + lynx_pcs_destroy(pcs); > +} > + > static void enetc_set_vlan_promisc(struct enetc_hw *hw, char si_map) > { > u32 val = enetc_port_rd(hw, ENETC_PSIPVMR); > @@ -970,6 +981,14 @@ static void enetc_psi_destroy(struct pci_dev *pdev) > enetc_pci_remove(pdev); > } > > +static const struct enetc_pf_ops enetc_pf_ops = { > + .set_si_primary_mac = enetc_pf_set_primary_mac_addr, > + .get_si_primary_mac = enetc_pf_get_primary_mac_addr, > + .create_pcs = enetc_pf_create_pcs, > + .destroy_pcs = enetc_pf_destroy_pcs, > + .enable_psfp = enetc_psfp_enable, > +}; > + > static int enetc_pf_probe(struct pci_dev *pdev, > const struct pci_device_id *ent) > { > @@ -997,6 +1016,7 @@ static int enetc_pf_probe(struct pci_dev *pdev, > pf = enetc_si_priv(si); > pf->si = si; > pf->total_vfs = pci_sriov_get_totalvfs(pdev); > + enetc_pf_ops_register(pf, &enetc_pf_ops); > > err = enetc_setup_mac_addresses(node, pf); > if (err) > diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h > index 92a26b09cf57..39db9d5c2e50 100644 > --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h > +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h > @@ -28,6 +28,16 @@ struct enetc_vf_state { > enum enetc_vf_flags flags; > }; > > +struct enetc_pf; > + > +struct enetc_pf_ops { > + void (*set_si_primary_mac)(struct enetc_hw *hw, int si, const u8 *addr); > + void (*get_si_primary_mac)(struct enetc_hw *hw, int si, u8 *addr); > + struct phylink_pcs *(*create_pcs)(struct enetc_pf *pf, struct mii_bus *bus); > + void (*destroy_pcs)(struct phylink_pcs *pcs); > + int (*enable_psfp)(struct enetc_ndev_priv *priv); > +}; > + > struct enetc_pf { > struct enetc_si *si; > int num_vfs; /* number of active VFs, after sriov_init */ > @@ -50,6 +60,8 @@ struct enetc_pf { > > phy_interface_t if_mode; > struct phylink_config phylink_config; > + > + const struct enetc_pf_ops *ops; > }; > > #define phylink_to_enetc_pf(config) \ > @@ -59,9 +71,6 @@ int enetc_msg_psi_init(struct enetc_pf *pf); > void enetc_msg_psi_free(struct enetc_pf *pf); > void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int mbox_id, u16 *status); > > -void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr); > -void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si, > - const u8 *addr); > int enetc_pf_set_mac_addr(struct net_device *ndev, void *addr); > int enetc_setup_mac_addresses(struct device_node *np, struct enetc_pf *pf); > void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev, > @@ -71,3 +80,9 @@ void enetc_mdiobus_destroy(struct enetc_pf *pf); > int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node, > const struct phylink_mac_ops *ops); > void enetc_phylink_destroy(struct enetc_ndev_priv *priv); > + > +static inline void enetc_pf_ops_register(struct enetc_pf *pf, > + const struct enetc_pf_ops *ops) > +{ > + pf->ops = ops; > +} > diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c > index bce81a4f6f88..94690ed92e3f 100644 > --- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c > +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c > @@ -8,19 +8,37 @@ > > #include "enetc_pf.h" > > +static int enetc_set_si_hw_addr(struct enetc_pf *pf, int si, u8 *mac_addr) > +{ > + struct enetc_hw *hw = &pf->si->hw; > + > + if (pf->ops->set_si_primary_mac) > + pf->ops->set_si_primary_mac(hw, si, mac_addr); > + else > + return -EOPNOTSUPP; > + > + return 0; > +} > + > int enetc_pf_set_mac_addr(struct net_device *ndev, void *addr) > { > struct enetc_ndev_priv *priv = netdev_priv(ndev); > + struct enetc_pf *pf = enetc_si_priv(priv->si); > struct sockaddr *saddr = addr; > + int err; > > if (!is_valid_ether_addr(saddr->sa_data)) > return -EADDRNOTAVAIL; > > + err = enetc_set_si_hw_addr(pf, 0, saddr->sa_data); > + if (err) > + return err; > + > eth_hw_addr_set(ndev, saddr->sa_data); > - enetc_pf_set_primary_mac_addr(&priv->si->hw, 0, saddr->sa_data); > > return 0; > } > +EXPORT_SYMBOL_GPL(enetc_pf_set_mac_addr); > > static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf, > int si) > @@ -38,8 +56,8 @@ static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf, > } > > /* (2) bootloader supplied MAC address */ > - if (is_zero_ether_addr(mac_addr)) > - enetc_pf_get_primary_mac_addr(hw, si, mac_addr); > + if (is_zero_ether_addr(mac_addr) && pf->ops->get_si_primary_mac) > + pf->ops->get_si_primary_mac(hw, si, mac_addr); > > /* (3) choose a random one */ > if (is_zero_ether_addr(mac_addr)) { > @@ -48,7 +66,9 @@ static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf, > si, mac_addr); > } > > - enetc_pf_set_primary_mac_addr(hw, si, mac_addr); > + err = enetc_set_si_hw_addr(pf, si, mac_addr); > + if (err) > + return err; > > return 0; > } > @@ -70,11 +90,13 @@ int enetc_setup_mac_addresses(struct device_node *np, struct enetc_pf *pf) > > return 0; > } > +EXPORT_SYMBOL_GPL(enetc_setup_mac_addresses); > > void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev, > const struct net_device_ops *ndev_ops) > { > struct enetc_ndev_priv *priv = netdev_priv(ndev); > + struct enetc_pf *pf = enetc_si_priv(si); > > SET_NETDEV_DEV(ndev, &si->pdev->dev); > priv->ndev = ndev; > @@ -107,7 +129,8 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev, > NETDEV_XDP_ACT_NDO_XMIT | NETDEV_XDP_ACT_RX_SG | > NETDEV_XDP_ACT_NDO_XMIT_SG; > > - if (si->hw_features & ENETC_SI_F_PSFP && !enetc_psfp_enable(priv)) { > + if (si->hw_features & ENETC_SI_F_PSFP && pf->ops->enable_psfp && > + !pf->ops->enable_psfp(priv)) { > priv->active_offloads |= ENETC_F_QCI; > ndev->features |= NETIF_F_HW_TC; > ndev->hw_features |= NETIF_F_HW_TC; > @@ -116,6 +139,7 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev, > /* pick up primary MAC address from SI */ > enetc_load_primary_mac_addr(&si->hw, ndev); > } > +EXPORT_SYMBOL_GPL(enetc_pf_netdev_setup); > > static int enetc_mdio_probe(struct enetc_pf *pf, struct device_node *np) > { > @@ -162,6 +186,9 @@ static int enetc_imdio_create(struct enetc_pf *pf) > struct mii_bus *bus; > int err; > > + if (!pf->ops->create_pcs) > + return -EOPNOTSUPP; > + > bus = mdiobus_alloc_size(sizeof(*mdio_priv)); > if (!bus) > return -ENOMEM; > @@ -184,7 +211,7 @@ static int enetc_imdio_create(struct enetc_pf *pf) > goto free_mdio_bus; > } > > - phylink_pcs = lynx_pcs_create_mdiodev(bus, 0); > + phylink_pcs = pf->ops->create_pcs(pf, bus); > if (IS_ERR(phylink_pcs)) { > err = PTR_ERR(phylink_pcs); > dev_err(dev, "cannot create lynx pcs (%d)\n", err); > @@ -205,8 +232,8 @@ static int enetc_imdio_create(struct enetc_pf *pf) > > static void enetc_imdio_remove(struct enetc_pf *pf) > { > - if (pf->pcs) > - lynx_pcs_destroy(pf->pcs); > + if (pf->pcs && pf->ops->destroy_pcs) > + pf->ops->destroy_pcs(pf->pcs); > > if (pf->imdio) { > mdiobus_unregister(pf->imdio); > @@ -246,12 +273,14 @@ int enetc_mdiobus_create(struct enetc_pf *pf, struct device_node *node) > > return 0; > } > +EXPORT_SYMBOL_GPL(enetc_mdiobus_create); > > void enetc_mdiobus_destroy(struct enetc_pf *pf) > { > enetc_mdio_remove(pf); > enetc_imdio_remove(pf); > } > +EXPORT_SYMBOL_GPL(enetc_mdiobus_destroy); > > int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node, > const struct phylink_mac_ops *ops) > @@ -288,8 +317,13 @@ int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node, > > return 0; > } > +EXPORT_SYMBOL_GPL(enetc_phylink_create); > > void enetc_phylink_destroy(struct enetc_ndev_priv *priv) > { > phylink_destroy(priv->phylink); > } > +EXPORT_SYMBOL_GPL(enetc_phylink_destroy); > + > +MODULE_DESCRIPTION("NXP ENETC PF common functionality driver"); > +MODULE_LICENSE("Dual BSD/GPL"); > -- > 2.34.1 >
> -----Original Message----- > From: Wei Fang <wei.fang@nxp.com> > Sent: Tuesday, October 22, 2024 8:52 AM [...] > Subject: [PATCH v4 net-next 06/13] net: enetc: build enetc_pf_common.c as a > separate module > > Compile enetc_pf_common.c as a standalone module to allow shared usage > between ENETC v1 and v4 PF drivers. Add struct enetc_pf_ops to register > different hardware operation interfaces for both ENETC v1 and v4 PF > drivers. > > Signed-off-by: Wei Fang <wei.fang@nxp.com> > --- Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/ethernet/freescale/enetc/Kconfig index 51d80ea959d4..e1b151a98b41 100644 --- a/drivers/net/ethernet/freescale/enetc/Kconfig +++ b/drivers/net/ethernet/freescale/enetc/Kconfig @@ -7,6 +7,14 @@ config FSL_ENETC_CORE If compiled as module (M), the module name is fsl-enetc-core. +config NXP_ENETC_PF_COMMON + tristate + help + This module supports common functionality between drivers of + different versions of NXP ENETC PF controllers. + + If compiled as module (M), the module name is nxp-enetc-pf-common. + config FSL_ENETC tristate "ENETC PF driver" depends on PCI_MSI @@ -14,6 +22,7 @@ config FSL_ENETC select FSL_ENETC_CORE select FSL_ENETC_IERB select FSL_ENETC_MDIO + select NXP_ENETC_PF_COMMON select PHYLINK select PCS_LYNX select DIMLIB diff --git a/drivers/net/ethernet/freescale/enetc/Makefile b/drivers/net/ethernet/freescale/enetc/Makefile index 8f4d8e9c37a0..ebe232673ed4 100644 --- a/drivers/net/ethernet/freescale/enetc/Makefile +++ b/drivers/net/ethernet/freescale/enetc/Makefile @@ -3,8 +3,11 @@ obj-$(CONFIG_FSL_ENETC_CORE) += fsl-enetc-core.o fsl-enetc-core-y := enetc.o enetc_cbdr.o enetc_ethtool.o +obj-$(CONFIG_NXP_ENETC_PF_COMMON) += nxp-enetc-pf-common.o +nxp-enetc-pf-common-y := enetc_pf_common.o + obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o -fsl-enetc-y := enetc_pf.o enetc_pf_common.o +fsl-enetc-y := enetc_pf.o fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o fsl-enetc-$(CONFIG_FSL_ENETC_QOS) += enetc_qos.o diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 3cdd149056f9..7522316ddfea 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -11,7 +11,7 @@ #define ENETC_DRV_NAME_STR "ENETC PF driver" -void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr) +static void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr) { u32 upper = __raw_readl(hw->port + ENETC_PSIPMAR0(si)); u16 lower = __raw_readw(hw->port + ENETC_PSIPMAR1(si)); @@ -20,8 +20,8 @@ void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr) put_unaligned_le16(lower, addr + 4); } -void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si, - const u8 *addr) +static void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si, + const u8 *addr) { u32 upper = get_unaligned_le32(addr); u16 lower = get_unaligned_le16(addr + 4); @@ -30,6 +30,17 @@ void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si, __raw_writew(lower, hw->port + ENETC_PSIPMAR1(si)); } +static struct phylink_pcs *enetc_pf_create_pcs(struct enetc_pf *pf, + struct mii_bus *bus) +{ + return lynx_pcs_create_mdiodev(bus, 0); +} + +static void enetc_pf_destroy_pcs(struct phylink_pcs *pcs) +{ + lynx_pcs_destroy(pcs); +} + static void enetc_set_vlan_promisc(struct enetc_hw *hw, char si_map) { u32 val = enetc_port_rd(hw, ENETC_PSIPVMR); @@ -970,6 +981,14 @@ static void enetc_psi_destroy(struct pci_dev *pdev) enetc_pci_remove(pdev); } +static const struct enetc_pf_ops enetc_pf_ops = { + .set_si_primary_mac = enetc_pf_set_primary_mac_addr, + .get_si_primary_mac = enetc_pf_get_primary_mac_addr, + .create_pcs = enetc_pf_create_pcs, + .destroy_pcs = enetc_pf_destroy_pcs, + .enable_psfp = enetc_psfp_enable, +}; + static int enetc_pf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -997,6 +1016,7 @@ static int enetc_pf_probe(struct pci_dev *pdev, pf = enetc_si_priv(si); pf->si = si; pf->total_vfs = pci_sriov_get_totalvfs(pdev); + enetc_pf_ops_register(pf, &enetc_pf_ops); err = enetc_setup_mac_addresses(node, pf); if (err) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h index 92a26b09cf57..39db9d5c2e50 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h @@ -28,6 +28,16 @@ struct enetc_vf_state { enum enetc_vf_flags flags; }; +struct enetc_pf; + +struct enetc_pf_ops { + void (*set_si_primary_mac)(struct enetc_hw *hw, int si, const u8 *addr); + void (*get_si_primary_mac)(struct enetc_hw *hw, int si, u8 *addr); + struct phylink_pcs *(*create_pcs)(struct enetc_pf *pf, struct mii_bus *bus); + void (*destroy_pcs)(struct phylink_pcs *pcs); + int (*enable_psfp)(struct enetc_ndev_priv *priv); +}; + struct enetc_pf { struct enetc_si *si; int num_vfs; /* number of active VFs, after sriov_init */ @@ -50,6 +60,8 @@ struct enetc_pf { phy_interface_t if_mode; struct phylink_config phylink_config; + + const struct enetc_pf_ops *ops; }; #define phylink_to_enetc_pf(config) \ @@ -59,9 +71,6 @@ int enetc_msg_psi_init(struct enetc_pf *pf); void enetc_msg_psi_free(struct enetc_pf *pf); void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int mbox_id, u16 *status); -void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr); -void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si, - const u8 *addr); int enetc_pf_set_mac_addr(struct net_device *ndev, void *addr); int enetc_setup_mac_addresses(struct device_node *np, struct enetc_pf *pf); void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev, @@ -71,3 +80,9 @@ void enetc_mdiobus_destroy(struct enetc_pf *pf); int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node, const struct phylink_mac_ops *ops); void enetc_phylink_destroy(struct enetc_ndev_priv *priv); + +static inline void enetc_pf_ops_register(struct enetc_pf *pf, + const struct enetc_pf_ops *ops) +{ + pf->ops = ops; +} diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c index bce81a4f6f88..94690ed92e3f 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c @@ -8,19 +8,37 @@ #include "enetc_pf.h" +static int enetc_set_si_hw_addr(struct enetc_pf *pf, int si, u8 *mac_addr) +{ + struct enetc_hw *hw = &pf->si->hw; + + if (pf->ops->set_si_primary_mac) + pf->ops->set_si_primary_mac(hw, si, mac_addr); + else + return -EOPNOTSUPP; + + return 0; +} + int enetc_pf_set_mac_addr(struct net_device *ndev, void *addr) { struct enetc_ndev_priv *priv = netdev_priv(ndev); + struct enetc_pf *pf = enetc_si_priv(priv->si); struct sockaddr *saddr = addr; + int err; if (!is_valid_ether_addr(saddr->sa_data)) return -EADDRNOTAVAIL; + err = enetc_set_si_hw_addr(pf, 0, saddr->sa_data); + if (err) + return err; + eth_hw_addr_set(ndev, saddr->sa_data); - enetc_pf_set_primary_mac_addr(&priv->si->hw, 0, saddr->sa_data); return 0; } +EXPORT_SYMBOL_GPL(enetc_pf_set_mac_addr); static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf, int si) @@ -38,8 +56,8 @@ static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf, } /* (2) bootloader supplied MAC address */ - if (is_zero_ether_addr(mac_addr)) - enetc_pf_get_primary_mac_addr(hw, si, mac_addr); + if (is_zero_ether_addr(mac_addr) && pf->ops->get_si_primary_mac) + pf->ops->get_si_primary_mac(hw, si, mac_addr); /* (3) choose a random one */ if (is_zero_ether_addr(mac_addr)) { @@ -48,7 +66,9 @@ static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf, si, mac_addr); } - enetc_pf_set_primary_mac_addr(hw, si, mac_addr); + err = enetc_set_si_hw_addr(pf, si, mac_addr); + if (err) + return err; return 0; } @@ -70,11 +90,13 @@ int enetc_setup_mac_addresses(struct device_node *np, struct enetc_pf *pf) return 0; } +EXPORT_SYMBOL_GPL(enetc_setup_mac_addresses); void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev, const struct net_device_ops *ndev_ops) { struct enetc_ndev_priv *priv = netdev_priv(ndev); + struct enetc_pf *pf = enetc_si_priv(si); SET_NETDEV_DEV(ndev, &si->pdev->dev); priv->ndev = ndev; @@ -107,7 +129,8 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev, NETDEV_XDP_ACT_NDO_XMIT | NETDEV_XDP_ACT_RX_SG | NETDEV_XDP_ACT_NDO_XMIT_SG; - if (si->hw_features & ENETC_SI_F_PSFP && !enetc_psfp_enable(priv)) { + if (si->hw_features & ENETC_SI_F_PSFP && pf->ops->enable_psfp && + !pf->ops->enable_psfp(priv)) { priv->active_offloads |= ENETC_F_QCI; ndev->features |= NETIF_F_HW_TC; ndev->hw_features |= NETIF_F_HW_TC; @@ -116,6 +139,7 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev, /* pick up primary MAC address from SI */ enetc_load_primary_mac_addr(&si->hw, ndev); } +EXPORT_SYMBOL_GPL(enetc_pf_netdev_setup); static int enetc_mdio_probe(struct enetc_pf *pf, struct device_node *np) { @@ -162,6 +186,9 @@ static int enetc_imdio_create(struct enetc_pf *pf) struct mii_bus *bus; int err; + if (!pf->ops->create_pcs) + return -EOPNOTSUPP; + bus = mdiobus_alloc_size(sizeof(*mdio_priv)); if (!bus) return -ENOMEM; @@ -184,7 +211,7 @@ static int enetc_imdio_create(struct enetc_pf *pf) goto free_mdio_bus; } - phylink_pcs = lynx_pcs_create_mdiodev(bus, 0); + phylink_pcs = pf->ops->create_pcs(pf, bus); if (IS_ERR(phylink_pcs)) { err = PTR_ERR(phylink_pcs); dev_err(dev, "cannot create lynx pcs (%d)\n", err); @@ -205,8 +232,8 @@ static int enetc_imdio_create(struct enetc_pf *pf) static void enetc_imdio_remove(struct enetc_pf *pf) { - if (pf->pcs) - lynx_pcs_destroy(pf->pcs); + if (pf->pcs && pf->ops->destroy_pcs) + pf->ops->destroy_pcs(pf->pcs); if (pf->imdio) { mdiobus_unregister(pf->imdio); @@ -246,12 +273,14 @@ int enetc_mdiobus_create(struct enetc_pf *pf, struct device_node *node) return 0; } +EXPORT_SYMBOL_GPL(enetc_mdiobus_create); void enetc_mdiobus_destroy(struct enetc_pf *pf) { enetc_mdio_remove(pf); enetc_imdio_remove(pf); } +EXPORT_SYMBOL_GPL(enetc_mdiobus_destroy); int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node, const struct phylink_mac_ops *ops) @@ -288,8 +317,13 @@ int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node, return 0; } +EXPORT_SYMBOL_GPL(enetc_phylink_create); void enetc_phylink_destroy(struct enetc_ndev_priv *priv) { phylink_destroy(priv->phylink); } +EXPORT_SYMBOL_GPL(enetc_phylink_destroy); + +MODULE_DESCRIPTION("NXP ENETC PF common functionality driver"); +MODULE_LICENSE("Dual BSD/GPL");
Compile enetc_pf_common.c as a standalone module to allow shared usage between ENETC v1 and v4 PF drivers. Add struct enetc_pf_ops to register different hardware operation interfaces for both ENETC v1 and v4 PF drivers. Signed-off-by: Wei Fang <wei.fang@nxp.com> --- v2 changes: This patch is separated from v1 patch 5 ("net: enetc: add enetc-pf-common driver support"), only the changes to compile enetc_pf_common.c into a separated driver are kept. v3 changes: Refactor the commit message. v4 changes: Remove the input prompt of CONFIG_NXP_ENETC_PF_COMMON. --- drivers/net/ethernet/freescale/enetc/Kconfig | 9 ++++ drivers/net/ethernet/freescale/enetc/Makefile | 5 +- .../net/ethernet/freescale/enetc/enetc_pf.c | 26 ++++++++-- .../net/ethernet/freescale/enetc/enetc_pf.h | 21 ++++++-- .../freescale/enetc/enetc_pf_common.c | 50 ++++++++++++++++--- 5 files changed, 96 insertions(+), 15 deletions(-)