diff mbox series

[v5,3/9] can: m_can: Map WoL to device_set_wakeup_enable

Message ID 20241028-topic-mcan-wakeup-source-v6-12-v5-3-33edc0aba629@baylibre.com (mailing list archive)
State Awaiting Upstream
Delegated to: Netdev Maintainers
Headers show
Series can: m_can: Add am62 wakeup support | expand

Checks

Context Check Description
netdev/tree_selection success Series ignored based on subject

Commit Message

Markus Schneider-Pargmann Oct. 28, 2024, 5:38 p.m. UTC 
In some devices the pins of the m_can module can act as a wakeup source.
This patch helps do that by connecting the PHY_WAKE WoL option to
device_set_wakeup_enable. By marking this device as being wakeup
enabled, this setting can be used by platform code to decide which
sleep or poweroff mode to use.

Also this prepares the driver for the next patch in which the pinctrl
settings are changed depending on the desired wakeup source.

Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 drivers/net/can/m_can/m_can.c | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index a978b960f1f1e1e8273216ff330ab789d0fd6d51..b358b60a1dee0f39aba9e2ec89dcbd0d65cd7823 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -2185,6 +2185,36 @@  static int m_can_set_coalesce(struct net_device *dev,
 	return 0;
 }
 
+static void m_can_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct m_can_classdev *cdev = netdev_priv(dev);
+
+	wol->supported = device_can_wakeup(cdev->dev) ? WAKE_PHY : 0;
+	wol->wolopts = device_may_wakeup(cdev->dev) ? WAKE_PHY : 0;
+}
+
+static int m_can_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct m_can_classdev *cdev = netdev_priv(dev);
+	bool wol_enable = !!(wol->wolopts & WAKE_PHY);
+	int ret;
+
+	if (wol->wolopts & ~WAKE_PHY)
+		return -EINVAL;
+
+	if (wol_enable == device_may_wakeup(cdev->dev))
+		return 0;
+
+	ret = device_set_wakeup_enable(cdev->dev, wol_enable);
+	if (ret) {
+		netdev_err(cdev->net, "Failed to set wakeup enable %pE\n",
+			   ERR_PTR(ret));
+		return ret;
+	}
+
+	return 0;
+}
+
 static const struct ethtool_ops m_can_ethtool_ops_coalescing = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS_IRQ |
 		ETHTOOL_COALESCE_RX_MAX_FRAMES_IRQ |
@@ -2194,10 +2224,14 @@  static const struct ethtool_ops m_can_ethtool_ops_coalescing = {
 	.get_ts_info = ethtool_op_get_ts_info,
 	.get_coalesce = m_can_get_coalesce,
 	.set_coalesce = m_can_set_coalesce,
+	.get_wol = m_can_get_wol,
+	.set_wol = m_can_set_wol,
 };
 
 static const struct ethtool_ops m_can_ethtool_ops = {
 	.get_ts_info = ethtool_op_get_ts_info,
+	.get_wol = m_can_get_wol,
+	.set_wol = m_can_set_wol,
 };
 
 static int register_m_can_dev(struct m_can_classdev *cdev)
@@ -2324,6 +2358,9 @@  struct m_can_classdev *m_can_class_allocate_dev(struct device *dev,
 		goto out;
 	}
 
+	if (dev->of_node && of_property_read_bool(dev->of_node, "wakeup-source"))
+		device_set_wakeup_capable(dev, true);
+
 	/* Get TX FIFO size
 	 * Defines the total amount of echo buffers for loopback
 	 */