@@ -10,11 +10,15 @@
#include <linux/ethtool.h>
#include <linux/ethtool_netlink.h>
#include <linux/bitfield.h>
+#include "microchip_ptp.h"
#define PHY_ID_LAN87XX 0x0007c150
#define PHY_ID_LAN937X 0x0007c180
#define PHY_ID_LAN887X 0x0007c1f0
+#define MCHP_PTP_LTC_BASE_ADDR 0xe000
+#define MCHP_PTP_PORT_BASE_ADDR (MCHP_PTP_LTC_BASE_ADDR + 0x800)
+
/* External Register Control Register */
#define LAN87XX_EXT_REG_CTL (0x14)
#define LAN87XX_EXT_REG_CTL_RD_CTL (0x1000)
@@ -229,6 +233,7 @@
#define LAN887X_INT_STS 0xf000
#define LAN887X_INT_MSK 0xf001
+#define LAN887X_INT_MSK_P1588_MOD_INT_MSK BIT(3)
#define LAN887X_INT_MSK_T1_PHY_INT_MSK BIT(2)
#define LAN887X_INT_MSK_LINK_UP_MSK BIT(1)
#define LAN887X_INT_MSK_LINK_DOWN_MSK BIT(0)
@@ -319,6 +324,8 @@ struct lan887x_regwr_map {
struct lan887x_priv {
u64 stats[ARRAY_SIZE(lan887x_hw_stats)];
+ struct mchp_ptp_clock *clock;
+ bool init_done;
};
static int lan937x_dsp_workaround(struct phy_device *phydev, u16 ereg, u8 bank)
@@ -1269,8 +1276,19 @@ static int lan887x_get_features(struct phy_device *phydev)
static int lan887x_phy_init(struct phy_device *phydev)
{
+ struct lan887x_priv *priv = phydev->priv;
int ret;
+ if (!priv->init_done && phy_interrupt_is_valid(phydev)) {
+ priv->clock = mchp_ptp_probe(phydev, MDIO_MMD_VEND1,
+ MCHP_PTP_LTC_BASE_ADDR,
+ MCHP_PTP_PORT_BASE_ADDR);
+ if (IS_ERR(priv->clock))
+ return PTR_ERR(priv->clock);
+
+ priv->init_done = true;
+ }
+
/* Clear loopback */
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
LAN887X_MIS_CFG_REG2,
@@ -1470,6 +1488,7 @@ static int lan887x_probe(struct phy_device *phydev)
if (!priv)
return -ENOMEM;
+ priv->init_done = false;
phydev->priv = priv;
return lan887x_phy_setup(phydev);
@@ -1518,6 +1537,7 @@ static void lan887x_get_strings(struct phy_device *phydev, u8 *data)
static int lan887x_config_intr(struct phy_device *phydev)
{
+ struct lan887x_priv *priv = phydev->priv;
int rc;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
@@ -1537,12 +1557,23 @@ static int lan887x_config_intr(struct phy_device *phydev)
rc = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_INT_STS);
}
+ if (rc < 0)
+ return rc;
- return rc < 0 ? rc : 0;
+ if (phy_is_default_hwtstamp(phydev)) {
+ return mchp_config_ptp_intr(priv->clock, LAN887X_INT_MSK,
+ LAN887X_INT_MSK_P1588_MOD_INT_MSK,
+ (phydev->interrupts ==
+ PHY_INTERRUPT_ENABLED));
+ }
+
+ return 0;
}
static irqreturn_t lan887x_handle_interrupt(struct phy_device *phydev)
{
+ struct lan887x_priv *priv = phydev->priv;
+ int rc = IRQ_NONE;
int irq_status;
irq_status = phy_read_mmd(phydev, MDIO_MMD_VEND1, LAN887X_INT_STS);
@@ -1553,10 +1584,13 @@ static irqreturn_t lan887x_handle_interrupt(struct phy_device *phydev)
if (irq_status & LAN887X_MX_CHIP_TOP_LINK_MSK) {
phy_trigger_machine(phydev);
- return IRQ_HANDLED;
+ rc = IRQ_HANDLED;
}
- return IRQ_NONE;
+ if (irq_status & LAN887X_INT_MSK_P1588_MOD_INT_MSK)
+ rc = mchp_ptp_handle_interrupt(priv->clock);
+
+ return rc;
}
static int lan887x_cd_reset(struct phy_device *phydev,
Add initialization of ptp for lan887x. Signed-off-by: Divya Koppera <divya.koppera@microchip.com> --- v2 -> v3 - No changes v1 -> v2 Fixed below review comment Added ptp support only if interrupts are supported as interrupts are mandatory for ptp. --- drivers/net/phy/microchip_t1.c | 40 +++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-)