[3/3] rust: add `build_error!` to the prelude

Commit Message

Miguel Ojeda Nov. 23, 2024, 10:28 p.m. UTC

The sibling `build_assert!` is already in the prelude, it makes sense
that a "core"/"language" facility like this is part of the prelude and
users should not be defining their own one (thus there should be no risk
of future name collisions and we would want to be aware of them anyway).

Thus add `build_error!` into the prelude.

Signed-off-by: Miguel Ojeda <[e-mail]>
---
 rust/kernel/block/mq/operations.rs |  3 ++-
 rust/kernel/build_assert.rs        |  1 -
 rust/kernel/net/phy.rs             | 18 +++++++++---------
 rust/kernel/prelude.rs             |  2 +-
 rust/macros/lib.rs                 |  8 ++++----
 5 files changed, 16 insertions(+), 16 deletions(-)

Patch

diff --git a/rust/kernel/block/mq/operations.rs b/rust/kernel/block/mq/operations.rs
index 962f16a5a530..864ff379dc91 100644
--- a/rust/kernel/block/mq/operations.rs
+++ b/rust/kernel/block/mq/operations.rs
@@ -9,6 +9,7 @@ 
     block::mq::request::RequestDataWrapper,
     block::mq::Request,
     error::{from_result, Result},
+    prelude::*,
     types::ARef,
 };
 use core::{marker::PhantomData, sync::atomic::AtomicU64, sync::atomic::Ordering};
@@ -35,7 +36,7 @@  pub trait Operations: Sized {
     /// Called by the kernel to poll the device for completed requests. Only
     /// used for poll queues.
     fn poll() -> bool {
-        crate::build_error!(crate::error::VTABLE_DEFAULT_ERROR)
+        build_error!(crate::error::VTABLE_DEFAULT_ERROR)
     }
 }
 
diff --git a/rust/kernel/build_assert.rs b/rust/kernel/build_assert.rs
index 347ba5ce50f4..6331b15d7c4d 100644
--- a/rust/kernel/build_assert.rs
+++ b/rust/kernel/build_assert.rs
@@ -14,7 +14,6 @@ 
 /// # Examples
 ///
 /// ```
-/// # use kernel::build_error;
 /// #[inline]
 /// fn foo(a: usize) -> usize {
 ///     a.checked_add(1).unwrap_or_else(|| build_error!("overflow"))
diff --git a/rust/kernel/net/phy.rs b/rust/kernel/net/phy.rs
index f488f6c55e9a..654311a783e9 100644
--- a/rust/kernel/net/phy.rs
+++ b/rust/kernel/net/phy.rs
@@ -587,17 +587,17 @@  pub trait Driver {
 
     /// Issues a PHY software reset.
     fn soft_reset(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Sets up device-specific structures during discovery.
     fn probe(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Probes the hardware to determine what abilities it has.
     fn get_features(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Returns true if this is a suitable driver for the given phydev.
@@ -609,32 +609,32 @@  fn match_phy_device(_dev: &Device) -> bool {
     /// Configures the advertisement and resets auto-negotiation
     /// if auto-negotiation is enabled.
     fn config_aneg(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Determines the negotiated speed and duplex.
     fn read_status(_dev: &mut Device) -> Result<u16> {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Suspends the hardware, saving state if needed.
     fn suspend(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Resumes the hardware, restoring state if needed.
     fn resume(_dev: &mut Device) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Overrides the default MMD read function for reading a MMD register.
     fn read_mmd(_dev: &mut Device, _devnum: u8, _regnum: u16) -> Result<u16> {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Overrides the default MMD write function for writing a MMD register.
     fn write_mmd(_dev: &mut Device, _devnum: u8, _regnum: u16, _val: u16) -> Result {
-        kernel::build_error!(VTABLE_DEFAULT_ERROR)
+        build_error!(VTABLE_DEFAULT_ERROR)
     }
 
     /// Callback for notification of link change.
diff --git a/rust/kernel/prelude.rs b/rust/kernel/prelude.rs
index 8bdab9aa0d16..ed076b3062ae 100644
--- a/rust/kernel/prelude.rs
+++ b/rust/kernel/prelude.rs
@@ -19,7 +19,7 @@ 
 #[doc(no_inline)]
 pub use macros::{module, pin_data, pinned_drop, vtable, Zeroable};
 
-pub use super::build_assert;
+pub use super::{build_assert, build_error};
 
 // `super::std_vendor` is hidden, which makes the macro inline for some reason.
 #[doc(no_inline)]
diff --git a/rust/macros/lib.rs b/rust/macros/lib.rs
index 1a30c8075ebd..d61bc6a56425 100644
--- a/rust/macros/lib.rs
+++ b/rust/macros/lib.rs
@@ -123,12 +123,12 @@  pub fn module(ts: TokenStream) -> TokenStream {
 /// used on the Rust side, it should not be possible to call the default
 /// implementation. This is done to ensure that we call the vtable methods
 /// through the C vtable, and not through the Rust vtable. Therefore, the
-/// default implementation should call `kernel::build_error!`, which prevents
+/// default implementation should call `build_error!`, which prevents
 /// calls to this function at compile time:
 ///
 /// ```compile_fail
 /// # // Intentionally missing `use`s to simplify `rusttest`.
-/// kernel::build_error!(VTABLE_DEFAULT_ERROR)
+/// build_error!(VTABLE_DEFAULT_ERROR)
 /// ```
 ///
 /// Note that you might need to import [`kernel::error::VTABLE_DEFAULT_ERROR`].
@@ -145,11 +145,11 @@  pub fn module(ts: TokenStream) -> TokenStream {
 /// #[vtable]
 /// pub trait Operations: Send + Sync + Sized {
 ///     fn foo(&self) -> Result<()> {
-///         kernel::build_error!(VTABLE_DEFAULT_ERROR)
+///         build_error!(VTABLE_DEFAULT_ERROR)
 ///     }
 ///
 ///     fn bar(&self) -> Result<()> {
-///         kernel::build_error!(VTABLE_DEFAULT_ERROR)
+///         build_error!(VTABLE_DEFAULT_ERROR)
 ///     }
 /// }
 ///