@@ -65,6 +65,13 @@ config SFC_MCDI_LOGGING
Driver-Interface) commands and responses, allowing debugging of
driver/firmware interaction. The tracing is actually enabled by
a sysfs file 'mcdi_logging' under the PCI device.
+config SFC_CXL
+ bool "Solarflare SFC9100-family CXL support"
+ depends on SFC && CXL_BUS && !(SFC=y && CXL_BUS=m)
+ default y
+ help
+ This enables CXL support by the driver relying on kernel support
+ and hardware support.
source "drivers/net/ethernet/sfc/falcon/Kconfig"
source "drivers/net/ethernet/sfc/siena/Kconfig"
@@ -13,6 +13,7 @@ sfc-$(CONFIG_SFC_SRIOV) += sriov.o ef10_sriov.o ef100_sriov.o ef100_rep.o \
mae.o tc.o tc_bindings.o tc_counters.o \
tc_encap_actions.o tc_conntrack.o
+sfc-$(CONFIG_SFC_CXL) += efx_cxl.o
obj-$(CONFIG_SFC) += sfc.o
obj-$(CONFIG_SFC_FALCON) += falcon/
@@ -34,6 +34,9 @@
#include "selftest.h"
#include "sriov.h"
#include "efx_devlink.h"
+#ifdef CONFIG_SFC_CXL
+#include "efx_cxl.h"
+#endif
#include "mcdi_port_common.h"
#include "mcdi_pcol.h"
@@ -1004,12 +1007,17 @@ static void efx_pci_remove(struct pci_dev *pci_dev)
efx_pci_remove_main(efx);
efx_fini_io(efx);
+
+ probe_data = container_of(efx, struct efx_probe_data, efx);
+#ifdef CONFIG_SFC_CXL
+ efx_cxl_exit(probe_data);
+#endif
+
pci_dbg(efx->pci_dev, "shutdown successful\n");
efx_fini_devlink_and_unlock(efx);
efx_fini_struct(efx);
free_netdev(efx->net_dev);
- probe_data = container_of(efx, struct efx_probe_data, efx);
kfree(probe_data);
};
@@ -1214,6 +1222,17 @@ static int efx_pci_probe(struct pci_dev *pci_dev,
if (rc)
goto fail2;
+#ifdef CONFIG_SFC_CXL
+ /* A successful cxl initialization implies a CXL region created to be
+ * used for PIO buffers. If there is no CXL support, or initialization
+ * fails, efx_cxl_pio_initialised wll be false and legacy PIO buffers
+ * defined at specific PCI BAR regions will be used.
+ */
+ rc = efx_cxl_init(probe_data);
+ if (rc)
+ pci_err(pci_dev, "CXL initialization failed with error %d\n", rc);
+
+#endif
rc = efx_pci_probe_post_io(efx);
if (rc) {
/* On failure, retry once immediately.
@@ -1485,3 +1504,6 @@ MODULE_AUTHOR("Solarflare Communications and "
MODULE_DESCRIPTION("Solarflare network driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, efx_pci_table);
+#ifdef CONFIG_SFC_CXL
+MODULE_SOFTDEP("pre: cxl_core cxl_port cxl_acpi cxl-mem");
+#endif
new file mode 100644
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/****************************************************************************
+ *
+ * Driver for AMD network controllers and boards
+ * Copyright (C) 2024, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <cxl/cxl.h>
+#include <cxl/pci.h>
+#include <linux/pci.h>
+
+#include "net_driver.h"
+#include "efx_cxl.h"
+
+#define EFX_CTPIO_BUFFER_SIZE SZ_256M
+
+int efx_cxl_init(struct efx_probe_data *probe_data)
+{
+ struct efx_nic *efx = &probe_data->efx;
+ struct pci_dev *pci_dev;
+ struct efx_cxl *cxl;
+ struct resource res;
+ u16 dvsec;
+ int rc;
+
+ pci_dev = efx->pci_dev;
+ probe_data->cxl_pio_initialised = false;
+
+ dvsec = pci_find_dvsec_capability(pci_dev, PCI_VENDOR_ID_CXL,
+ CXL_DVSEC_PCIE_DEVICE);
+ if (!dvsec)
+ return 0;
+
+ pci_dbg(pci_dev, "CXL_DVSEC_PCIE_DEVICE capability found\n");
+
+ cxl = kzalloc(sizeof(*cxl), GFP_KERNEL);
+ if (!cxl)
+ return -ENOMEM;
+
+ cxl->cxlds = cxl_accel_state_create(&pci_dev->dev);
+ if (IS_ERR(cxl->cxlds)) {
+ pci_err(pci_dev, "CXL accel device state failed");
+ rc = -ENOMEM;
+ goto err1;
+ }
+
+ cxl_set_dvsec(cxl->cxlds, dvsec);
+ cxl_set_serial(cxl->cxlds, pci_dev->dev.id);
+
+ res = DEFINE_RES_MEM(0, EFX_CTPIO_BUFFER_SIZE);
+ if (cxl_set_resource(cxl->cxlds, res, CXL_RES_DPA)) {
+ pci_err(pci_dev, "cxl_set_resource DPA failed\n");
+ rc = -EINVAL;
+ goto err2;
+ }
+
+ res = DEFINE_RES_MEM_NAMED(0, EFX_CTPIO_BUFFER_SIZE, "ram");
+ if (cxl_set_resource(cxl->cxlds, res, CXL_RES_RAM)) {
+ pci_err(pci_dev, "cxl_set_resource RAM failed\n");
+ rc = -EINVAL;
+ goto err2;
+ }
+
+ probe_data->cxl = cxl;
+
+ return 0;
+
+err2:
+ kfree(cxl->cxlds);
+err1:
+ kfree(cxl);
+ return rc;
+}
+
+void efx_cxl_exit(struct efx_probe_data *probe_data)
+{
+ if (probe_data->cxl) {
+ kfree(probe_data->cxl->cxlds);
+ kfree(probe_data->cxl);
+ }
+}
+
+MODULE_IMPORT_NS(CXL);
new file mode 100644
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/****************************************************************************
+ * Driver for AMD network controllers and boards
+ * Copyright (C) 2024, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_CXL_H
+#define EFX_CXL_H
+
+struct efx_nic;
+
+struct efx_cxl {
+ struct cxl_dev_state *cxlds;
+ struct cxl_memdev *cxlmd;
+ struct cxl_root_decoder *cxlrd;
+ struct cxl_port *endpoint;
+ struct cxl_endpoint_decoder *cxled;
+ struct cxl_region *efx_region;
+ void __iomem *ctpio_cxl;
+};
+
+int efx_cxl_init(struct efx_probe_data *probe_data);
+void efx_cxl_exit(struct efx_probe_data *probe_data);
+#endif
@@ -1199,14 +1199,24 @@ struct efx_nic {
atomic_t n_rx_noskb_drops;
};
+#ifdef CONFIG_SFC_CXL
+struct efx_cxl;
+#endif
+
/**
* struct efx_probe_data - State after hardware probe
* @pci_dev: The PCI device
* @efx: Efx NIC details
+ * @cxl: details of related cxl objects
+ * @cxl_pio_initialised: cxl initialization outcome.
*/
struct efx_probe_data {
struct pci_dev *pci_dev;
struct efx_nic efx;
+#ifdef CONFIG_SFC_CXL
+ struct efx_cxl *cxl;
+ bool cxl_pio_initialised;
+#endif
};
static inline struct efx_nic *efx_netdev_priv(struct net_device *dev)