new file mode 100644
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/qcom,ipq9574-pcs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PCS for Qualcomm IPQ9574 SoC
+
+maintainers:
+ - Lei Wei <quic_leiwei@quicinc.com>
+
+description:
+ The UNIPHY hardware blocks in the Qualcomm IPQ SoC include PCS and SerDes
+ functions. They enable connectivity between the Ethernet MAC inside the
+ PPE (packet processing engine) and external Ethernet PHY/switch. There are
+ three UNIPHY instances in IPQ9574 SoC which provide PCS functions to the
+ six Ethernet ports.
+
+ For SGMII (1Gbps PHY) or 2500BASE-X (2.5Gbps PHY) interface modes, the PCS
+ function is enabled by using the PCS block inside UNIPHY. For USXGMII (10Gbps
+ PHY), the XPCS block in UNIPHY is used.
+
+ The SerDes provides 125M (1Gbps mode) or 312.5M (2.5Gbps and 10Gbps modes)
+ RX and TX clocks to the NSSCC (Networking Sub System Clock Controller). The
+ NSSCC divides these clocks and generates the MII RX and TX clocks to each
+ of the MII interfaces between the PCS and MAC, as per the link speeds and
+ interface modes.
+
+ Different IPQ SoC may support different number of UNIPHYs (PCSes) since the
+ number of ports and their capabilities can be different between these SoCs
+
+ Below diagram depicts the UNIPHY (PCS) connections for an IPQ9574 SoC based
+ board. In this example, the PCS0 has four GMIIs/XGMIIs, which can connect
+ with four MACs to support QSGMII (4 x 1Gbps) or 10G_QXGMII (4 x 2.5Gbps)
+ interface modes.
+
+ - +-------+ +---------+ +-------------------------+
+ +---------+CMN PLL| | GCC | | NSSCC (Divider) |
+ | +----+--+ +----+----+ +--+-------+--------------+
+ | | | ^ |
+ | 31.25M | SYS/AHB|clk RX/TX|clk +------------+
+ | ref clk| | | | |
+ | | v | MII RX|TX clk MAC| RX/TX clk
+ |25/50M +--+---------+----------+-------+---+ +-+---------+
+ |ref clk | | +----------------+ | | | | PPE |
+ v | | | UNIPHY0 V | | V |
+ +-------+ | v | +-----------+ (X)GMII| | |
+ | | | +---+---+ | |--------|------|-- MAC0 |
+ | | | | | | | (X)GMII| | |
+ | Quad | | |SerDes | | PCS/XPCS |--------|------|-- MAC1 |
+ | +<----+ | | | | (X)GMII| | |
+ |(X)GPHY| | | | | |--------|------|-- MAC2 |
+ | | | | | | | (X)GMII| | |
+ | | | +-------+ | |--------|------|-- MAC3 |
+ +-------+ | | | | | |
+ | +-----------+ | | |
+ +-----------------------------------+ | |
+ +--+---------+----------+-------+---+ | |
+ +-------+ | UNIPHY1 | | |
+ | | | +-----------+ | | |
+ |(X)GPHY| | +-------+ | | (X)GMII| | |
+ | +<----+ |SerDes | | PCS/XPCS |--------|------|- MAC4 |
+ | | | | | | | | | |
+ +-------+ | +-------+ | | | | |
+ | +-----------+ | | |
+ +-----------------------------------+ | |
+ +--+---------+----------+-------+---+ | |
+ +-------+ | UNIPHY2 | | |
+ | | | +-----------+ | | |
+ |(X)GPHY| | +-------+ | | (X)GMII| | |
+ | +<----+ |SerDes | | PCS/XPCS |--------|------|- MAC5 |
+ | | | | | | | | | |
+ +-------+ | +-------+ | | | | |
+ | +-----------+ | | |
+ +-----------------------------------+ +-----------+
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq9574-pcs
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ clocks:
+ items:
+ - description: System clock
+ - description: AHB clock needed for register interface access
+
+ clock-names:
+ items:
+ - const: sys
+ - const: ahb
+
+ '#clock-cells':
+ const: 1
+ description: See include/dt-bindings/net/qcom,ipq9574-pcs.h for constants
+
+patternProperties:
+ '^pcs-mii@[0-4]$':
+ type: object
+ description: PCS MII interface.
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 4
+ description: MII index
+
+ clocks:
+ items:
+ - description: PCS MII RX clock
+ - description: PCS MII TX clock
+
+ clock-names:
+ items:
+ - const: rx
+ - const: tx
+
+ required:
+ - reg
+ - clocks
+ - clock-names
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+
+ ethernet-pcs@7a00000 {
+ compatible = "qcom,ipq9574-pcs";
+ reg = <0x7a00000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&gcc GCC_UNIPHY0_SYS_CLK>,
+ <&gcc GCC_UNIPHY0_AHB_CLK>;
+ clock-names = "sys",
+ "ahb";
+ #clock-cells = <1>;
+
+ pcs-mii@0 {
+ reg = <0>;
+ clocks = <&nsscc 116>,
+ <&nsscc 117>;
+ clock-names = "rx",
+ "tx";
+ };
+
+ pcs-mii@1 {
+ reg = <1>;
+ clocks = <&nsscc 118>,
+ <&nsscc 119>;
+ clock-names = "rx",
+ "tx";
+ };
+
+ pcs-mii@2 {
+ reg = <2>;
+ clocks = <&nsscc 120>,
+ <&nsscc 121>;
+ clock-names = "rx",
+ "tx";
+ };
+
+ pcs-mii@3 {
+ reg = <3>;
+ clocks = <&nsscc 122>,
+ <&nsscc 123>;
+ clock-names = "rx",
+ "tx";
+ };
+ };
new file mode 100644
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ * Device Tree constants for the Qualcomm IPQ9574 PCS
+ */
+
+#ifndef _DT_BINDINGS_PCS_QCOM_IPQ9574_H
+#define _DT_BINDINGS_PCS_QCOM_IPQ9574_H
+
+/* The RX and TX clocks which are provided from the SerDes to NSSCC. */
+#define PCS_RX_CLK 0
+#define PCS_TX_CLK 1
+
+#endif /* _DT_BINDINGS_PCS_QCOM_IPQ9574_H */
The 'UNIPHY' PCS block in the IPQ9574 SoC includes PCS and SerDes functions. It supports different interface modes to enable Ethernet MAC connections to different types of external PHYs/switch. It includes PCS functions for 1Gbps and 2.5Gbps interface modes and XPCS functions for 10Gbps interface modes. There are three UNIPHY (PCS) instances in IPQ9574 SoC which provide PCS/XPCS functions to the six Ethernet ports. Signed-off-by: Lei Wei <quic_leiwei@quicinc.com> --- .../bindings/net/pcs/qcom,ipq9574-pcs.yaml | 190 +++++++++++++++++++++ include/dt-bindings/net/qcom,ipq9574-pcs.h | 15 ++ 2 files changed, 205 insertions(+)