[net-next,v2,07/10] net: usb: lan78xx: Add error handling to lan78xx_init_ltm

Commit Message

Oleksij Rempel Dec. 4, 2024, 8:41 a.m. UTC

Convert `lan78xx_init_ltm` to return error codes and handle errors
properly.  Previously, errors during the LTM initialization process were
not propagated, potentially leading to undetected issues. This patch
ensures:

- Errors in `lan78xx_read_reg` and `lan78xx_write_reg` are checked and
  handled.
- Errors are logged with detailed messages using `%pe` for clarity.
- The function exits immediately on error, returning the error code.

Signed-off-by: Oleksij Rempel <[e-mail]>
Reviewed-by: Andrew Lunn <[e-mail]>
---
 drivers/net/usb/lan78xx.c | 50 ++++++++++++++++++++++++++++++---------
 1 file changed, 39 insertions(+), 11 deletions(-)

Patch

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 29f6e1a36e20..33cda7f3dd12 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2807,13 +2807,16 @@  static int lan78xx_vlan_rx_kill_vid(struct net_device *netdev,
 	return 0;
 }
 
-static void lan78xx_init_ltm(struct lan78xx_net *dev)
+static int lan78xx_init_ltm(struct lan78xx_net *dev)
 {
+	u32 regs[6] = { 0 };
 	int ret;
 	u32 buf;
-	u32 regs[6] = { 0 };
 
 	ret = lan78xx_read_reg(dev, USB_CFG1, &buf);
+	if (ret < 0)
+		goto init_ltm_failed;
+
 	if (buf & USB_CFG1_LTM_ENABLE_) {
 		u8 temp[2];
 		/* Get values from EEPROM first */
@@ -2824,7 +2827,7 @@  static void lan78xx_init_ltm(struct lan78xx_net *dev)
 							      24,
 							      (u8 *)regs);
 				if (ret < 0)
-					return;
+					return ret;
 			}
 		} else if (lan78xx_read_otp(dev, 0x3F, 2, temp) == 0) {
 			if (temp[0] == 24) {
@@ -2833,17 +2836,40 @@  static void lan78xx_init_ltm(struct lan78xx_net *dev)
 							   24,
 							   (u8 *)regs);
 				if (ret < 0)
-					return;
+					return ret;
 			}
 		}
 	}
 
-	lan78xx_write_reg(dev, LTM_BELT_IDLE0, regs[0]);
-	lan78xx_write_reg(dev, LTM_BELT_IDLE1, regs[1]);
-	lan78xx_write_reg(dev, LTM_BELT_ACT0, regs[2]);
-	lan78xx_write_reg(dev, LTM_BELT_ACT1, regs[3]);
-	lan78xx_write_reg(dev, LTM_INACTIVE0, regs[4]);
-	lan78xx_write_reg(dev, LTM_INACTIVE1, regs[5]);
+	ret = lan78xx_write_reg(dev, LTM_BELT_IDLE0, regs[0]);
+	if (ret < 0)
+		goto init_ltm_failed;
+
+	ret = lan78xx_write_reg(dev, LTM_BELT_IDLE1, regs[1]);
+	if (ret < 0)
+		goto init_ltm_failed;
+
+	ret = lan78xx_write_reg(dev, LTM_BELT_ACT0, regs[2]);
+	if (ret < 0)
+		goto init_ltm_failed;
+
+	ret = lan78xx_write_reg(dev, LTM_BELT_ACT1, regs[3]);
+	if (ret < 0)
+		goto init_ltm_failed;
+
+	ret = lan78xx_write_reg(dev, LTM_INACTIVE0, regs[4]);
+	if (ret < 0)
+		goto init_ltm_failed;
+
+	ret = lan78xx_write_reg(dev, LTM_INACTIVE1, regs[5]);
+	if (ret < 0)
+		goto init_ltm_failed;
+
+	return 0;
+
+init_ltm_failed:
+	netdev_err(dev->net, "Failed to init LTM with error %pe\n", ERR_PTR(ret));
+	return ret;
 }
 
 static int lan78xx_urb_config_init(struct lan78xx_net *dev)
@@ -2939,7 +2965,9 @@  static int lan78xx_reset(struct lan78xx_net *dev)
 		return ret;
 
 	/* Init LTM */
-	lan78xx_init_ltm(dev);
+	ret = lan78xx_init_ltm(dev);
+	if (ret < 0)
+		return ret;
 
 	ret = lan78xx_write_reg(dev, BURST_CAP, dev->burst_cap);
 	if (ret < 0)