From patchwork Wed Dec 11 23:53:42 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chris Packham X-Patchwork-Id: 13904526 X-Patchwork-Delegate: kuba@kernel.org Received: from gate2.alliedtelesis.co.nz (gate2.alliedtelesis.co.nz [202.36.163.20]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1AC941F37A0 for ; Wed, 11 Dec 2024 23:54:00 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=202.36.163.20 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733961243; cv=none; b=uIqblbpcBh0CWKngFV+raRxr2OCfGOM6h9o3FBkCZj8sSq0SyVpGeqAKo1pIIKkKN8ob3tuars3DsFCtLpZsHi8IUxRvPq0f23S7ff2+h0NbG1Yp7F8EsDmN1g05QYgaMbe+QX5tRVo+RWl8iQwBQkXGAvpd96fvGMvW1dJ2kIw= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733961243; c=relaxed/simple; bh=/b64pgqyFjn+0zdYe/fZWQ7lPUA2K5N4MlLwvF597s0=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=lJP/+cNDOIFL8qGo3GxvL35TXeRNqMYCCXZc7fUahd2+igT+syMuc0pIzygMoIPv1yaVKfPC4oxp9+vvnEvzqsvDIbTh1AVTFSvlOSMgOiD/PFsJCaPSCAlVov8oj8rjyxKyoqHUId2xvJqlNLV5TrfpWqDrie9nQG9JkzraatM= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=alliedtelesis.co.nz; spf=pass smtp.mailfrom=alliedtelesis.co.nz; dkim=pass (2048-bit key) header.d=alliedtelesis.co.nz header.i=@alliedtelesis.co.nz header.b=rBxY97+2; arc=none smtp.client-ip=202.36.163.20 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=alliedtelesis.co.nz Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=alliedtelesis.co.nz Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=alliedtelesis.co.nz header.i=@alliedtelesis.co.nz header.b="rBxY97+2" Received: from svr-chch-seg1.atlnz.lc (mmarshal3.atlnz.lc [10.32.18.43]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by gate2.alliedtelesis.co.nz (Postfix) with ESMTPS id A1EA82C0504; Thu, 12 Dec 2024 12:53:51 +1300 (NZDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=alliedtelesis.co.nz; s=mail181024; t=1733961231; bh=uFYPmlLq5/1jZhh75uLVt+XpKoL3iixWFn64Iqkf8sk=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=rBxY97+2xBLyQqft6CivvLQZcCnMsTS3lUG7jFHuVZ6PWSVNIgNFqUEArhjzLpHKT nQp0sJ0xT60yY9ZKZY812DwnUf1j+z9SrofxcPmhyFzMhqHLPnjuVsgMgsPh0RDAei y+2I5cvxIw0Mm09ujNG1r2b0Mdp1ZAGTP7hmv48kGGIZ8oyasbiwddGUMQfXGgDzRo HgU8Clez9usPwQjEYB2I5dnsdOdVJuikrwgdNbQXx1yYtL1/ahfq9qgAIdz+2gJ+NE IX9aq55V/ypgieq2g/xOCZj0SBUvJULsL+BuabqdlbgbrNLdI9kWuysE25R9EbS39e QgaZExZ/AAN6g== Received: from pat.atlnz.lc (Not Verified[10.32.16.33]) by svr-chch-seg1.atlnz.lc with Trustwave SEG (v8,2,6,11305) id ; Thu, 12 Dec 2024 12:53:51 +1300 Received: from chrisp-dl.ws.atlnz.lc (chrisp-dl.ws.atlnz.lc [10.33.22.30]) by pat.atlnz.lc (Postfix) with ESMTP id 2CD2913EE9C; Thu, 12 Dec 2024 12:53:51 +1300 (NZDT) Received: by chrisp-dl.ws.atlnz.lc (Postfix, from userid 1030) id 2B9702807DF; Thu, 12 Dec 2024 12:53:51 +1300 (NZDT) From: Chris Packham To: lee@kernel.org, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com, kuba@kernel.org, pabeni@redhat.com, tsbogend@alpha.franken.de, hkallweit1@gmail.com, linux@armlinux.org.uk, markus.stockhausen@gmx.de Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-mips@vger.kernel.org, Chris Packham Subject: [PATCH 4/4] net: mdio: Add RTL9300 MDIO driver Date: Thu, 12 Dec 2024 12:53:42 +1300 Message-ID: <20241211235342.1573926-5-chris.packham@alliedtelesis.co.nz> X-Mailer: git-send-email 2.47.1 In-Reply-To: <20241211235342.1573926-1-chris.packham@alliedtelesis.co.nz> References: <20241211235342.1573926-1-chris.packham@alliedtelesis.co.nz> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-SEG-SpamProfiler-Analysis: v=2.4 cv=BNQQr0QG c=1 sm=1 tr=0 ts=675a260f a=KLBiSEs5mFS1a/PbTCJxuA==:117 a=RZcAm9yDv7YA:10 a=cUr0DCv8HDOHa6VSQHkA:9 a=3ZKOabzyN94A:10 X-SEG-SpamProfiler-Score: 0 x-atlnz-ls: pat X-Patchwork-Delegate: kuba@kernel.org Add a driver for the MDIO controller on the RTL9300 family of Ethernet switches with integrated SoC. There are 4 physical SMI interfaces on the RTL9300 but access is done using the switch ports so a single MDIO bus is presented to the rest of the system. Signed-off-by: Chris Packham --- drivers/net/mdio/Kconfig | 7 + drivers/net/mdio/Makefile | 1 + drivers/net/mdio/mdio-realtek-rtl.c | 264 ++++++++++++++++++++++++++++ 3 files changed, 272 insertions(+) create mode 100644 drivers/net/mdio/mdio-realtek-rtl.c diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig index 4a7a303be2f7..0c6240c4a7e9 100644 --- a/drivers/net/mdio/Kconfig +++ b/drivers/net/mdio/Kconfig @@ -185,6 +185,13 @@ config MDIO_IPQ8064 This driver supports the MDIO interface found in the network interface units of the IPQ8064 SoC +config MDIO_REALTEK_RTL + tristate "Realtek RTL9300 MDIO interface support" + depends on MACH_REALTEK_RTL || COMPILE_TEST + help + This driver supports the MDIO interface found in the Realtek + RTL9300 family of Ethernet switches with integrated SoC. + config MDIO_REGMAP tristate help diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile index 1015f0db4531..2cd8b491f301 100644 --- a/drivers/net/mdio/Makefile +++ b/drivers/net/mdio/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o obj-$(CONFIG_MDIO_MSCC_MIIM) += mdio-mscc-miim.o obj-$(CONFIG_MDIO_MVUSB) += mdio-mvusb.o obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o +obj-$(CONFIG_MDIO_REALTEK_RTL) += mdio-realtek-rtl.o obj-$(CONFIG_MDIO_REGMAP) += mdio-regmap.o obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o diff --git a/drivers/net/mdio/mdio-realtek-rtl.c b/drivers/net/mdio/mdio-realtek-rtl.c new file mode 100644 index 000000000000..27d1bc02e1e0 --- /dev/null +++ b/drivers/net/mdio/mdio-realtek-rtl.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MDIO controller for RTL9300 switches with integrated SoC. + * + * The MDIO communication is abstracted by the switch. At the software level + * communication uses the switch port to address the PHY with the actual MDIO + * bus and address having been setup via the realtek,smi-address property. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define SMI_GLB_CTRL 0x000 +#define GLB_CTRL_INTF_SEL(intf) BIT(16 + (intf)) +#define SMI_PORT0_15_POLLING_SEL 0x008 +#define SMI_ACCESS_PHY_CTRL_0 0x170 +#define SMI_ACCESS_PHY_CTRL_1 0x174 +#define PHY_CTRL_RWOP BIT(2) +#define PHY_CTRL_TYPE BIT(1) +#define PHY_CTRL_CMD BIT(0) +#define PHY_CTRL_FAIL BIT(25) +#define SMI_ACCESS_PHY_CTRL_2 0x178 +#define SMI_ACCESS_PHY_CTRL_3 0x17c +#define SMI_PORT0_5_ADDR_CTRL 0x180 + +#define MAX_PORTS 32 +#define MAX_SMI_BUSSES 4 + +struct realtek_mdio_priv { + struct regmap *regmap; + u8 smi_bus[MAX_PORTS]; + u8 smi_addr[MAX_PORTS]; + bool smi_bus_isc45[MAX_SMI_BUSSES]; + u32 reg_base; +}; + +static int realtek_mdio_wait_ready(struct realtek_mdio_priv *priv) +{ + u32 val; + + return regmap_read_poll_timeout(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_1, + val, !(val & PHY_CTRL_CMD), 10, 500); +} + +static int realtek_mdio_read_c45(struct mii_bus *bus, int phy_id, int dev_addr, int regnum) +{ + struct realtek_mdio_priv *priv = bus->priv; + u32 val; + int err; + + err = realtek_mdio_wait_ready(priv); + if (err) + return err; + + err = regmap_write(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_2, phy_id << 16); + if (err) + return err; + + err = regmap_write(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_3, + dev_addr << 16 | (regnum & 0xffff)); + if (err) + return err; + + err = regmap_write(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_1, + PHY_CTRL_TYPE | PHY_CTRL_CMD); + if (err) + return err; + + err = realtek_mdio_wait_ready(priv); + if (err) + return err; + + /* get_phy_c45_ids() will stop the mdio bus scan if we return an error + * here. So even though the SMI controller indicates an error for an + * absent device don't proagate it here. + */ + //if (val & BIT(25)) { + // err = -ENODEV; + // return err; + //} + + err = regmap_read(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_2, &val); + if (err) + return err; + + return val & 0xffff; +} + +static int realtek_mdio_write_c45(struct mii_bus *bus, int phy_id, int dev_addr, + int regnum, u16 value) +{ + struct realtek_mdio_priv *priv = bus->priv; + u32 val; + int err; + + err = realtek_mdio_wait_ready(priv); + if (err) + return err; + + err = regmap_write(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_0, BIT(phy_id)); + if (err) + return err; + + err = regmap_write(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_2, value << 16); + if (err) + return err; + + err = regmap_write(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_3, + dev_addr << 16 | (regnum & 0xffff)); + if (err) + return err; + + err = regmap_write(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_1, + PHY_CTRL_RWOP | PHY_CTRL_TYPE | PHY_CTRL_CMD); + if (err) + return err; + + err = regmap_read_poll_timeout(priv->regmap, priv->reg_base + SMI_ACCESS_PHY_CTRL_1, + val, !(val & PHY_CTRL_CMD), 10, 100); + if (err) + return err; + + if (val & PHY_CTRL_FAIL) { + err = -ENXIO; + return err; + } + + return err; +} + +static int realtek_mdiobus_init(struct realtek_mdio_priv *priv) +{ + u32 port_addr[5] = { }; + u32 poll_sel[2] = { 0, 0 }; + u32 glb_ctrl_mask = 0, glb_ctrl_val = 0; + int i, err; + + for (i = 0; i < MAX_PORTS; i++) { + int pos; + + if (priv->smi_bus[i] > 3) + continue; + + pos = (i % 6) * 5; + port_addr[i / 6] |= priv->smi_addr[i] << pos; + + pos = (i % 16) * 2; + poll_sel[i / 16] |= priv->smi_bus[i] << pos; + } + + for (i = 0; i < MAX_SMI_BUSSES; i++) { + if (priv->smi_bus_isc45[i]) { + glb_ctrl_mask |= GLB_CTRL_INTF_SEL(i); + glb_ctrl_val |= GLB_CTRL_INTF_SEL(i); + } + } + + err = regmap_bulk_write(priv->regmap, priv->reg_base + SMI_PORT0_5_ADDR_CTRL, + port_addr, 5); + if (err) + return err; + + err = regmap_bulk_write(priv->regmap, priv->reg_base + SMI_PORT0_15_POLLING_SEL, + poll_sel, 2); + if (err) + return err; + + err = regmap_update_bits(priv->regmap, priv->reg_base + SMI_GLB_CTRL, + glb_ctrl_mask, glb_ctrl_val); + if (err) + return err; + + return 0; +} + +static int realtek_mdiobus_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct realtek_mdio_priv *priv; + struct fwnode_handle *child; + struct mii_bus *bus; + int err; + + bus = devm_mdiobus_alloc_size(dev, sizeof(*priv)); + if (!bus) + return -ENOMEM; + + bus->name = "Reaktek Switch MDIO Bus"; + bus->read_c45 = realtek_mdio_read_c45; + bus->write_c45 = realtek_mdio_write_c45; + bus->parent = dev; + priv = bus->priv; + + priv->regmap = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + err = device_property_read_u32(dev, "reg", &priv->reg_base); + if (err) + return err; + + snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev)); + + device_for_each_child_node(dev, child) { + u32 pn, smi_addr[2]; + + err = fwnode_property_read_u32(child, "reg", &pn); + if (err) + return err; + + if (pn > MAX_PORTS) + return dev_err_probe(dev, -EINVAL, "illegal port number %d\n", pn); + + err = fwnode_property_read_u32_array(child, "realtek,smi-address", smi_addr, 2); + if (err) { + smi_addr[0] = 0; + smi_addr[1] = pn; + } + + if (fwnode_device_is_compatible(child, "ethernet-phy-ieee802.3-c45")) + priv->smi_bus_isc45[smi_addr[0]] = true; + + priv->smi_bus[pn] = smi_addr[0]; + priv->smi_addr[pn] = smi_addr[1]; + } + + err = realtek_mdiobus_init(priv); + if (err) + return dev_err_probe(dev, err, "failed to initialise MDIO bus controller\n"); + + err = devm_of_mdiobus_register(dev, bus, dev->of_node); + if (err) + return dev_err_probe(dev, err, "cannot register MDIO bus\n"); + + return 0; +} + +static const struct of_device_id realtek_mdio_ids[] = { + { .compatible = "realtek,rtl9301-mdio" }, + { .compatible = "realtek,rtl9302b-mdio" }, + { .compatible = "realtek,rtl9302c-mdio" }, + { .compatible = "realtek,rtl9303-mdio" }, + {} +}; +MODULE_DEVICE_TABLE(of, realtek_mdio_ids); + +static struct platform_driver rtl9300_mdio_driver = { + .probe = realtek_mdiobus_probe, + .driver = { + .name = "mdio-rtl9300", + .of_match_table = realtek_mdio_ids, + }, +}; + +module_platform_driver(rtl9300_mdio_driver); + +MODULE_DESCRIPTION("RTL9300 MDIO driver"); +MODULE_LICENSE("GPL");