@@ -1778,7 +1778,7 @@ static int tn40_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ret = tn40_phy_register(priv);
if (ret) {
dev_err(&pdev->dev, "failed to set up PHY.\n");
- goto err_free_irq;
+ goto err_cleanup_swnodes;
}
ret = tn40_priv_init(priv);
@@ -1795,6 +1795,8 @@ static int tn40_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
err_unregister_phydev:
tn40_phy_unregister(priv);
+err_cleanup_swnodes:
+ tn40_swnodes_cleanup(priv);
err_free_irq:
pci_free_irq_vectors(pdev);
err_unset_drvdata:
@@ -1816,6 +1818,7 @@ static void tn40_remove(struct pci_dev *pdev)
unregister_netdev(ndev);
tn40_phy_unregister(priv);
+ tn40_swnodes_cleanup(priv);
pci_free_irq_vectors(priv->pdev);
pci_set_drvdata(pdev, NULL);
iounmap(priv->regs);
@@ -4,6 +4,7 @@
#ifndef _TN40_H_
#define _TN40_H_
+#include <linux/property.h>
#include "tn40_regs.h"
#define TN40_DRV_NAME "tn40xx"
@@ -102,10 +103,39 @@ struct tn40_txdb {
int size; /* Number of elements in the db */
};
+#define NODE_PROP(_NAME, _PROP) ( \
+ (const struct software_node) { \
+ .name = _NAME, \
+ .properties = _PROP, \
+ })
+
+#define NODE_PAR_PROP(_NAME, _PAR, _PROP) ( \
+ (const struct software_node) { \
+ .name = _NAME, \
+ .parent = _PAR, \
+ .properties = _PROP, \
+ })
+
+enum tn40_swnodes {
+ SWNODE_MDIO,
+ SWNODE_PHY,
+ SWNODE_MAX
+};
+
+struct tn40_nodes {
+ char phy_name[32];
+ char mdio_name[32];
+ struct property_entry phy_props[3];
+ struct software_node swnodes[SWNODE_MAX];
+ const struct software_node *group[SWNODE_MAX + 1];
+};
+
struct tn40_priv {
struct net_device *ndev;
struct pci_dev *pdev;
+ struct tn40_nodes nodes;
+
struct napi_struct napi;
/* RX FIFOs: 1 for data (full) descs, and 2 for free descs */
struct tn40_rxd_fifo rxd_fifo0;
@@ -225,6 +255,7 @@ static inline void tn40_write_reg(struct tn40_priv *priv, u32 reg, u32 val)
int tn40_set_link_speed(struct tn40_priv *priv, u32 speed);
+void tn40_swnodes_cleanup(struct tn40_priv *priv);
int tn40_mdiobus_init(struct tn40_priv *priv);
int tn40_phy_register(struct tn40_priv *priv);
@@ -14,6 +14,8 @@
(FIELD_PREP(TN40_MDIO_PRTAD_MASK, (port))))
#define TN40_MDIO_CMD_READ BIT(15)
+#define AQR105_FIRMWARE "tehuti/aqr105-tn40xx.cld"
+
static void tn40_mdio_set_speed(struct tn40_priv *priv, u32 speed)
{
void __iomem *regs = priv->regs;
@@ -111,6 +113,56 @@ static int tn40_mdio_write_c45(struct mii_bus *mii_bus, int addr, int devnum,
return tn40_mdio_write(mii_bus->priv, addr, devnum, regnum, val);
}
+/* registers an mdio node and an aqr105 PHY at address 1
+ * tn40_mdio-%id {
+ * ethernet-phy@1 {
+ * compatible = "ethernet-phy-id03a1.b4a3";
+ * reg = <1>;
+ * firmware-name = AQR105_FIRMWARE;
+ * };
+ * };
+ */
+static int tn40_swnodes_register(struct tn40_priv *priv)
+{
+ struct tn40_nodes *nodes = &priv->nodes;
+ struct pci_dev *pdev = priv->pdev;
+ struct software_node *swnodes;
+ u32 id;
+
+ id = pci_dev_id(pdev);
+
+ snprintf(nodes->phy_name, sizeof(nodes->phy_name), "ethernet-phy@1");
+ snprintf(nodes->mdio_name, sizeof(nodes->mdio_name), "tn40_mdio-%x",
+ id);
+
+ swnodes = nodes->swnodes;
+
+ swnodes[SWNODE_MDIO] = NODE_PROP(nodes->mdio_name, NULL);
+
+ nodes->phy_props[0] = PROPERTY_ENTRY_STRING("compatible",
+ "ethernet-phy-id03a1.b4a3");
+ nodes->phy_props[1] = PROPERTY_ENTRY_U32("reg", 1);
+ nodes->phy_props[2] = PROPERTY_ENTRY_STRING("firmware-name",
+ AQR105_FIRMWARE);
+ swnodes[SWNODE_PHY] = NODE_PAR_PROP(nodes->phy_name,
+ &swnodes[SWNODE_MDIO],
+ nodes->phy_props);
+
+ nodes->group[SWNODE_PHY] = &swnodes[SWNODE_PHY];
+ nodes->group[SWNODE_MDIO] = &swnodes[SWNODE_MDIO];
+ return software_node_register_node_group(nodes->group);
+}
+
+void tn40_swnodes_cleanup(struct tn40_priv *priv)
+{
+ /* cleanup of swnodes is only needed for AQR105-based cards */
+ if (priv->pdev->device == 0x4025) {
+ fwnode_handle_put(dev_fwnode(&priv->mdio->dev));
+ device_remove_software_node(&priv->mdio->dev);
+ software_node_unregister_node_group(priv->nodes.group);
+ }
+}
+
int tn40_mdiobus_init(struct tn40_priv *priv)
{
struct pci_dev *pdev = priv->pdev;
@@ -129,14 +181,36 @@ int tn40_mdiobus_init(struct tn40_priv *priv)
bus->read_c45 = tn40_mdio_read_c45;
bus->write_c45 = tn40_mdio_write_c45;
+ priv->mdio = bus;
+
+ /* provide swnodes for AQR105-based cards only */
+ if (pdev->device == 0x4025) {
+ ret = tn40_swnodes_register(priv);
+ if (ret) {
+ pr_err("swnodes failed\n");
+ return ret;
+ }
+
+ ret = device_add_software_node(&bus->dev,
+ priv->nodes.group[SWNODE_MDIO]);
+ if (ret) {
+ dev_err(&pdev->dev, "device_add_software_node failed:"
+ " %d\n", ret);
+ }
+ }
ret = devm_mdiobus_register(&pdev->dev, bus);
if (ret) {
dev_err(&pdev->dev, "failed to register mdiobus %d %u %u\n",
ret, bus->state, MDIOBUS_UNREGISTERED);
- return ret;
+ goto err_swnodes_cleanup;
}
tn40_mdio_set_speed(priv, TN40_MDIO_SPEED_6MHZ);
- priv->mdio = bus;
return 0;
+
+err_swnodes_cleanup:
+ tn40_swnodes_cleanup(priv);
+ return ret;
}
+
+MODULE_FIRMWARE(AQR105_FIRMWARE);