| Message ID | 20250218-marvell-88q2xxx-hwmon-enable-at-probe-v1-1-999a304c8a11@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | net: phy: marvell-88q2xxx: Enable temperature measurement in probe again | expand |
diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c index a3996471a1c9a5d4060d5d19ce44aa70e902a83f..30d71bfc365597d77c34c48f05390db9d63c4af4 100644 --- a/drivers/net/phy/marvell-88q2xxx.c +++ b/drivers/net/phy/marvell-88q2xxx.c @@ -718,6 +718,13 @@ static int mv88q2xxx_hwmon_probe(struct phy_device *phydev) struct device *dev = &phydev->mdio.dev; struct device *hwmon; char *hwmon_name; + int ret; + + /* Enable temperature sense */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_TEMP_SENSOR2, + MDIO_MMD_PCS_MV_TEMP_SENSOR2_DIS_MASK, 0); + if (ret < 0) + return ret; priv->enable_temp = true; hwmon_name = devm_hwmon_sanitize_name(dev, dev_name(dev));
Enabling of the temperature sensor was moved from mv88q2xxx_hwmon_probe to mv88q222x_config_init with the consequence that the sensor is only usable when the PHY is configured. Enable the sensor in mv88q2xxx_hwmon_probe as well to fix this. Fixes: a197004cf3c2 ("net: phy: marvell-88q2xxx: Fix temperature measurement with reset-gpios") Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> --- drivers/net/phy/marvell-88q2xxx.c | 7 +++++++ 1 file changed, 7 insertions(+)