@@ -116,6 +116,9 @@
#define MII_BASIC_CONFIG_RMII 0x5
#define MII_BASIC_CONFIG_MII 0x4
+#define VEND1_SGMII_BASIC_CONTROL 0xB000
+#define SGMII_LPM BIT(11)
+
#define VEND1_SYMBOL_ERROR_CNT_XTD 0x8351
#define EXTENDED_CNT_EN BIT(15)
#define VEND1_MONITOR_STATUS 0xAC80
@@ -1600,11 +1603,11 @@ static int nxp_c45_set_phy_mode(struct phy_device *phydev)
return 0;
}
-/* Errata: ES_TJA1120 and ES_TJA1121 Rev. 1.0 — 28 November 2024 Section 3.1 */
+/* Errata: ES_TJA1120 and ES_TJA1121 Rev. 1.0 — 28 November 2024 Section 3.1 & 3.2 */
static void nxp_c45_tja1120_errata(struct phy_device *phydev)
{
+ bool macsec_ability, sgmii_ability;
int silicon_version, sample_type;
- bool macsec_ability;
int phy_abilities;
int ret = 0;
@@ -1621,6 +1624,7 @@ static void nxp_c45_tja1120_errata(struct phy_device *phydev)
phy_abilities = phy_read_mmd(phydev, MDIO_MMD_VEND1,
VEND1_PORT_ABILITIES);
macsec_ability = !!(phy_abilities & MACSEC_ABILITY);
+ sgmii_ability = !!(phy_abilities & SGMII_ABILITY);
if ((!macsec_ability && silicon_version == 2) ||
(macsec_ability && silicon_version == 1)) {
/* TJA1120/TJA1121 PHY configuration errata workaround.
@@ -1641,6 +1645,18 @@ static void nxp_c45_tja1120_errata(struct phy_device *phydev)
phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F8, 0x0);
phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x01F9, 0x0);
+
+ if (sgmii_ability) {
+ /* TJA1120B/TJA1121B SGMII PCS restart errata workaround.
+ * Put SGMII PCS into power down mode and back up.
+ */
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ VEND1_SGMII_BASIC_CONTROL,
+ SGMII_LPM);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ VEND1_SGMII_BASIC_CONTROL,
+ SGMII_LPM);
+ }
}
}
TJA1120B/TJA1121B can achieve a stable operation of SGMII after a startup event by putting the SGMII PCS into power down mode and restart afterwards. It is necessary to put the SGMII PCS into power down mode and back up. Signed-off-by: Andrei Botila <andrei.botila@oss.nxp.com> --- drivers/net/phy/nxp-c45-tja11xx.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)