[bpf-next,v2,2/2] bpf, x86: Add x86 JIT support for timed may_goto

Commit Message

Kumar Kartikeya Dwivedi March 4, 2025, 12:32 a.m. UTC

Implement the arch_bpf_timed_may_goto function using inline assembly to
have control over which registers are spilled, and use our special
protocol of using BPF_REG_AX as an argument into the function, and as
the return value when going back.

Emit call depth accounting for the call made from this stub, and ensure
we don't have naked returns (when rethunk mitigations are enabled) by
falling back to the RET macro (instead of retq). After popping all saved
registers, the return address into the BPF program should be on top of
the stack.

Since the JIT support is now enabled, ensure selftests which are
checking the produced may_goto sequences do not break by adjusting them.
Make sure we still test the old may_goto sequence on other
architectures, while testing the new sequence on x86_64.

Signed-off-by: Kumar Kartikeya Dwivedi <[e-mail]>
---
 arch/x86/net/Makefile                         |  2 +-
 arch/x86/net/bpf_jit_comp.c                   |  5 ++
 arch/x86/net/bpf_timed_may_goto.S             | 52 +++++++++++++++++
 .../bpf/progs/verifier_bpf_fastcall.c         | 58 +++++++++++++++----
 .../selftests/bpf/progs/verifier_may_goto_1.c | 34 ++++++++++-
 5 files changed, 138 insertions(+), 13 deletions(-)
 create mode 100644 arch/x86/net/bpf_timed_may_goto.S

Patch

diff --git a/arch/x86/net/Makefile b/arch/x86/net/Makefile
index 383c87300b0d..dddbefc0f439 100644
--- a/arch/x86/net/Makefile
+++ b/arch/x86/net/Makefile
@@ -6,5 +6,5 @@ 
 ifeq ($(CONFIG_X86_32),y)
         obj-$(CONFIG_BPF_JIT) += bpf_jit_comp32.o
 else
-        obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o
+        obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o bpf_timed_may_goto.o
 endif
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index a43fc5af973d..f3e9ef6b5329 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -3791,3 +3791,8 @@  u64 bpf_arch_uaddress_limit(void)
 {
 	return 0;
 }
+
+bool bpf_jit_supports_timed_may_goto(void)
+{
+	return true;
+}
diff --git a/arch/x86/net/bpf_timed_may_goto.S b/arch/x86/net/bpf_timed_may_goto.S
new file mode 100644
index 000000000000..547140ebcd10
--- /dev/null
+++ b/arch/x86/net/bpf_timed_may_goto.S
@@ -0,0 +1,52 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2025 Meta Platforms, Inc. and affiliates. */
+
+#include <linux/export.h>
+#include <linux/linkage.h>
+#include <asm/nospec-branch.h>
+
+	.code64
+	.section .text, "ax"
+
+SYM_FUNC_START(arch_bpf_timed_may_goto)
+	ANNOTATE_NOENDBR
+
+	/*
+	 * Save r0-r5.
+	 */
+	pushq %rax
+	pushq %rdi
+	pushq %rsi
+	pushq %rdx
+	pushq %rcx
+	pushq %r8
+
+	/*
+	 * r10 passes us stack depth, load the pointer to count and timestamp as
+	 * first argument to the call below.
+	 */
+	leaq (%rbp, %r10, 1), %rdi
+
+	/*
+	 * Emit call depth accounting for call below.
+	 */
+	CALL_DEPTH_ACCOUNT
+	call bpf_check_timed_may_goto
+
+	/*
+	 * BPF_REG_AX=r10 will be stored into count, so move return value to it.
+	 */
+	movq %rax, %r10
+
+	/*
+	 * Restore r5-r0.
+	 */
+	popq %r8
+	popq %rcx
+	popq %rdx
+	popq %rsi
+	popq %rdi
+	popq %rax
+
+	RET
+SYM_FUNC_END(arch_bpf_timed_may_goto)
diff --git a/tools/testing/selftests/bpf/progs/verifier_bpf_fastcall.c b/tools/testing/selftests/bpf/progs/verifier_bpf_fastcall.c
index 5094c288cfd7..a9be6ae49454 100644
--- a/tools/testing/selftests/bpf/progs/verifier_bpf_fastcall.c
+++ b/tools/testing/selftests/bpf/progs/verifier_bpf_fastcall.c
@@ -620,23 +620,61 @@  __naked void helper_call_does_not_prevent_bpf_fastcall(void)
 
 SEC("raw_tp")
 __arch_x86_64
+__log_level(4) __msg("stack depth 24")
+/* may_goto counter at -24 */
+__xlated("0: *(u64 *)(r10 -24) =")
+/* may_goto timestamp at -16 */
+__xlated("1: *(u64 *)(r10 -16) =")
+__xlated("2: r1 = 1")
+__xlated("...")
+__xlated("4: r0 = &(void __percpu *)(r0)")
+__xlated("...")
+/* may_goto expansion starts */
+__xlated("6: r11 = *(u64 *)(r10 -24)")
+__xlated("7: if r11 == 0x0 goto pc+6")
+__xlated("8: r11 -= 1")
+__xlated("9: if r11 != 0x0 goto pc+2")
+__xlated("10: r11 = -24")
+__xlated("11: call unknown")
+__xlated("12: *(u64 *)(r10 -24) = r11")
+/* may_goto expansion ends */
+__xlated("13: *(u64 *)(r10 -8) = r1")
+__xlated("14: exit")
+__success
+__naked void may_goto_interaction_x86_64(void)
+{
+	asm volatile (
+	"r1 = 1;"
+	"*(u64 *)(r10 - 16) = r1;"
+	"call %[bpf_get_smp_processor_id];"
+	"r1 = *(u64 *)(r10 - 16);"
+	".8byte %[may_goto];"
+	/* just touch some stack at -8 */
+	"*(u64 *)(r10 - 8) = r1;"
+	"exit;"
+	:
+	: __imm(bpf_get_smp_processor_id),
+	  __imm_insn(may_goto, BPF_RAW_INSN(BPF_JMP | BPF_JCOND, 0, 0, +1 /* offset */, 0))
+	: __clobber_all);
+}
+
+SEC("raw_tp")
+__arch_arm64
 __log_level(4) __msg("stack depth 16")
 /* may_goto counter at -16 */
 __xlated("0: *(u64 *)(r10 -16) =")
 __xlated("1: r1 = 1")
-__xlated("...")
-__xlated("3: r0 = &(void __percpu *)(r0)")
-__xlated("...")
+__xlated("2: call bpf_get_smp_processor_id")
 /* may_goto expansion starts */
-__xlated("5: r11 = *(u64 *)(r10 -16)")
-__xlated("6: if r11 == 0x0 goto pc+3")
-__xlated("7: r11 -= 1")
-__xlated("8: *(u64 *)(r10 -16) = r11")
+__xlated("3: r11 = *(u64 *)(r10 -16)")
+__xlated("4: if r11 == 0x0 goto pc+3")
+__xlated("5: r11 -= 1")
+__xlated("6: *(u64 *)(r10 -16) = r11")
 /* may_goto expansion ends */
-__xlated("9: *(u64 *)(r10 -8) = r1")
-__xlated("10: exit")
+__xlated("7: *(u64 *)(r10 -8) = r1")
+__xlated("8: exit")
 __success
-__naked void may_goto_interaction(void)
+__naked void may_goto_interaction_arm64(void)
 {
 	asm volatile (
 	"r1 = 1;"
diff --git a/tools/testing/selftests/bpf/progs/verifier_may_goto_1.c b/tools/testing/selftests/bpf/progs/verifier_may_goto_1.c
index e81097c96fe2..3966d827f288 100644
--- a/tools/testing/selftests/bpf/progs/verifier_may_goto_1.c
+++ b/tools/testing/selftests/bpf/progs/verifier_may_goto_1.c
@@ -69,8 +69,38 @@  __naked void may_goto_batch_1(void)
 }
 
 SEC("raw_tp")
-__description("may_goto batch with offsets 2/0")
+__description("may_goto batch with offsets 2/0 - x86_64")
 __arch_x86_64
+__xlated("0: *(u64 *)(r10 -16) = 65535")
+__xlated("1: *(u64 *)(r10 -8) = 0")
+__xlated("2: r11 = *(u64 *)(r10 -16)")
+__xlated("3: if r11 == 0x0 goto pc+6")
+__xlated("4: r11 -= 1")
+__xlated("5: if r11 != 0x0 goto pc+2")
+__xlated("6: r11 = -16")
+__xlated("7: call unknown")
+__xlated("8: *(u64 *)(r10 -16) = r11")
+__xlated("9: r0 = 1")
+__xlated("10: r0 = 2")
+__xlated("11: exit")
+__success
+__naked void may_goto_batch_2_x86_64(void)
+{
+	asm volatile (
+	".8byte %[may_goto1];"
+	".8byte %[may_goto3];"
+	"r0 = 1;"
+	"r0 = 2;"
+	"exit;"
+	:
+	: __imm_insn(may_goto1, BPF_RAW_INSN(BPF_JMP | BPF_JCOND, 0, 0, 2 /* offset */, 0)),
+	  __imm_insn(may_goto3, BPF_RAW_INSN(BPF_JMP | BPF_JCOND, 0, 0, 0 /* offset */, 0))
+	: __clobber_all);
+}
+
+SEC("raw_tp")
+__description("may_goto batch with offsets 2/0 - arm64")
+__arch_arm64
 __xlated("0: *(u64 *)(r10 -8) = 8388608")
 __xlated("1: r11 = *(u64 *)(r10 -8)")
 __xlated("2: if r11 == 0x0 goto pc+3")
@@ -80,7 +110,7 @@  __xlated("5: r0 = 1")
 __xlated("6: r0 = 2")
 __xlated("7: exit")
 __success
-__naked void may_goto_batch_2(void)
+__naked void may_goto_batch_2_arm64(void)
 {
 	asm volatile (
 	".8byte %[may_goto1];"