[net,1/6] can: ucan: fix out of bound read in strscpy() source

Commit Message

Marc Kleine-Budde March 14, 2025, 1:04 p.m. UTC

From: Vincent Mailhol <[e-mail]>

Commit 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()")
unintentionally introduced a one byte out of bound read on strscpy()'s
source argument (which is kind of ironic knowing that strscpy() is meant
to be a more secure alternative :)).

Let's consider below buffers:

  dest[len + 1]; /* will be NUL terminated */
  src[len]; /* may not be NUL terminated */

When doing:

  strncpy(dest, src, len);
  dest[len] = '\0';

strncpy() will read up to len bytes from src.

On the other hand:

  strscpy(dest, src, len + 1);

will read up to len + 1 bytes from src, that is to say, an out of bound
read of one byte will occur on src if it is not NUL terminated. Note
that the src[len] byte is never copied, but strscpy() still needs to
read it to check whether a truncation occurred or not.

This exact pattern happened in ucan.

The root cause is that the source is not NUL terminated. Instead of
doing a copy in a local buffer, directly NUL terminate it as soon as
usb_control_msg() returns. With this, the local firmware_str[] variable
can be removed.

On top of this do a couple refactors:

  - ucan_ctl_payload->raw is only used for the firmware string, so
    rename it to ucan_ctl_payload->fw_str and change its type from u8 to
    char.

  - ucan_device_request_in() is only used to retrieve the firmware
    string, so rename it to ucan_get_fw_str() and refactor it to make it
    directly handle all the string termination logic.

Reported-by: [e-mail]
Closes: https://lore.kernel.org/linux-can/[e-mail]/
Fixes: 7fdaf8966aae ("can: ucan: use strscpy() to instead of strncpy()")
Signed-off-by: Vincent Mailhol <[e-mail]>
Link: https://patch.msgid.link/[e-mail]
Cc: [e-mail]
Signed-off-by: Marc Kleine-Budde <[e-mail]>
---
 drivers/net/can/usb/ucan.c | 43 ++++++++++++++++----------------------
 1 file changed, 18 insertions(+), 25 deletions(-)


base-commit: 4003c9e78778e93188a09d6043a74f7154449d43

Patch

diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c
index 39a63b7313a4..07406daf7c88 100644
--- a/drivers/net/can/usb/ucan.c
+++ b/drivers/net/can/usb/ucan.c
@@ -186,7 +186,7 @@  union ucan_ctl_payload {
 	 */
 	struct ucan_ctl_cmd_get_protocol_version cmd_get_protocol_version;
 
-	u8 raw[128];
+	u8 fw_str[128];
 } __packed;
 
 enum {
@@ -424,18 +424,20 @@  static int ucan_ctrl_command_out(struct ucan_priv *up,
 			       UCAN_USB_CTL_PIPE_TIMEOUT);
 }
 
-static int ucan_device_request_in(struct ucan_priv *up,
-				  u8 cmd, u16 subcmd, u16 datalen)
+static void ucan_get_fw_str(struct ucan_priv *up, char *fw_str, size_t size)
 {
-	return usb_control_msg(up->udev,
-			       usb_rcvctrlpipe(up->udev, 0),
-			       cmd,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       subcmd,
-			       0,
-			       up->ctl_msg_buffer,
-			       datalen,
-			       UCAN_USB_CTL_PIPE_TIMEOUT);
+	int ret;
+
+	ret = usb_control_msg(up->udev, usb_rcvctrlpipe(up->udev, 0),
+			      UCAN_DEVICE_GET_FW_STRING,
+			      USB_DIR_IN | USB_TYPE_VENDOR |
+			      USB_RECIP_DEVICE,
+			      0, 0, fw_str, size - 1,
+			      UCAN_USB_CTL_PIPE_TIMEOUT);
+	if (ret > 0)
+		fw_str[ret] = '\0';
+	else
+		strscpy(fw_str, "unknown", size);
 }
 
 /* Parse the device information structure reported by the device and
@@ -1314,7 +1316,6 @@  static int ucan_probe(struct usb_interface *intf,
 	u8 in_ep_addr;
 	u8 out_ep_addr;
 	union ucan_ctl_payload *ctl_msg_buffer;
-	char firmware_str[sizeof(union ucan_ctl_payload) + 1];
 
 	udev = interface_to_usbdev(intf);
 
@@ -1527,17 +1528,6 @@  static int ucan_probe(struct usb_interface *intf,
 	 */
 	ucan_parse_device_info(up, &ctl_msg_buffer->cmd_get_device_info);
 
-	/* just print some device information - if available */
-	ret = ucan_device_request_in(up, UCAN_DEVICE_GET_FW_STRING, 0,
-				     sizeof(union ucan_ctl_payload));
-	if (ret > 0) {
-		/* copy string while ensuring zero termination */
-		strscpy(firmware_str, up->ctl_msg_buffer->raw,
-			sizeof(union ucan_ctl_payload) + 1);
-	} else {
-		strcpy(firmware_str, "unknown");
-	}
-
 	/* device is compatible, reset it */
 	ret = ucan_ctrl_command_out(up, UCAN_COMMAND_RESET, 0, 0);
 	if (ret < 0)
@@ -1555,7 +1545,10 @@  static int ucan_probe(struct usb_interface *intf,
 
 	/* initialisation complete, log device info */
 	netdev_info(up->netdev, "registered device\n");
-	netdev_info(up->netdev, "firmware string: %s\n", firmware_str);
+	ucan_get_fw_str(up, up->ctl_msg_buffer->fw_str,
+			sizeof(up->ctl_msg_buffer->fw_str));
+	netdev_info(up->netdev, "firmware string: %s\n",
+		    up->ctl_msg_buffer->fw_str);
 
 	/* success */
 	return 0;