| Message ID | 3b366e3dddd4d3cd7e89b92d3a8f78f6dc18e244.1631174218.git.geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | renesas: Add compatible properties to Ethernet PHY nodes | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
Hi Geert, Thanks for the patch. Tested the patch on Hihope RZ/G2M board. Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Regards, Biju > -----Original Message----- > From: Geert Uytterhoeven <geert+renesas@glider.be> > Sent: 09 September 2021 09:50 > To: Magnus Damm <magnus.damm@gmail.com> > Cc: Biju Das <biju.das.jz@bp.renesas.com>; Adam Ford <aford173@gmail.com>; > Florian Fainelli <f.fainelli@gmail.com>; Andrew Lunn <andrew@lunn.ch>; > Heiner Kallweit <hkallweit1@gmail.com>; Russell King > <linux@armlinux.org.uk>; Grygorii Strashko <grygorii.strashko@ti.com>; > linux-renesas-soc@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > netdev@vger.kernel.org; devicetree@vger.kernel.org; Geert Uytterhoeven > <geert+renesas@glider.be> > Subject: [PATCH 9/9] arm64: dts: renesas: Add compatible properties to > RTL8211E Ethernet PHYs > > Add compatible values to Ethernet PHY subnodes representing Realtek > RTL8211E PHYs on RZ/G2 boards. This allows software to identify the PHY > model at any time, regardless of the state of the PHY reset line. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > arch/arm64/boot/dts/renesas/cat875.dtsi | 2 ++ > arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 2 ++ > 2 files changed, 4 insertions(+) > > diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi > b/arch/arm64/boot/dts/renesas/cat875.dtsi > index 801ea54b027c43d9..a69d24e9c61db052 100644 > --- a/arch/arm64/boot/dts/renesas/cat875.dtsi > +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi > @@ -21,6 +21,8 @@ &avb { > status = "okay"; > > phy0: ethernet-phy@0 { > + compatible = "ethernet-phy-id001c.c915", > + "ethernet-phy-ieee802.3-c22"; > reg = <0>; > interrupt-parent = <&gpio2>; > interrupts = <21 IRQ_TYPE_LEVEL_LOW>; diff --git > a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi > b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi > index dde3a07bc417c690..ad898c6db4e62df6 100644 > --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi > +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi > @@ -24,6 +24,8 @@ &avb { > status = "okay"; > > phy0: ethernet-phy@0 { > + compatible = "ethernet-phy-id001c.c915", > + "ethernet-phy-ieee802.3-c22"; > reg = <0>; > interrupt-parent = <&gpio2>; > interrupts = <11 IRQ_TYPE_LEVEL_LOW>; > -- > 2.25.1
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi index 801ea54b027c43d9..a69d24e9c61db052 100644 --- a/arch/arm64/boot/dts/renesas/cat875.dtsi +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi @@ -21,6 +21,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c915", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index dde3a07bc417c690..ad898c6db4e62df6 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -24,6 +24,8 @@ &avb { status = "okay"; phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c915", + "ethernet-phy-ieee802.3-c22"; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
Add compatible values to Ethernet PHY subnodes representing Realtek RTL8211E PHYs on RZ/G2 boards. This allows software to identify the PHY model at any time, regardless of the state of the PHY reset line. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm64/boot/dts/renesas/cat875.dtsi | 2 ++ arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 2 ++ 2 files changed, 4 insertions(+)