@@ -1038,6 +1038,7 @@ static struct phy_driver realtek_drvs[] = {
.write_page = rtl821x_write_page,
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
+ .soft_reset = genphy_soft_reset,
}, {
PHY_ID_MATCH_EXACT(0x001cc840),
.name = "RTL8226B_RTL8221B 2.5Gbps PHY",
@@ -1050,6 +1051,7 @@ static struct phy_driver realtek_drvs[] = {
.write_page = rtl821x_write_page,
.read_mmd = rtl822x_read_mmd,
.write_mmd = rtl822x_write_mmd,
+ .soft_reset = genphy_soft_reset,
}, {
PHY_ID_MATCH_EXACT(0x001cc838),
.name = "RTL8226-CG 2.5Gbps PHY",
@@ -1060,6 +1062,7 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ .soft_reset = genphy_soft_reset,
}, {
PHY_ID_MATCH_EXACT(0x001cc848),
.name = "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
@@ -1070,6 +1073,7 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ .soft_reset = genphy_soft_reset,
}, {
PHY_ID_MATCH_EXACT(0x001cc849),
.name = "RTL8221B-VB-CG 2.5Gbps PHY",
@@ -1081,6 +1085,7 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ .soft_reset = genphy_soft_reset,
}, {
PHY_ID_MATCH_EXACT(0x001cc84a),
.name = "RTL8221B-VM-CG 2.5Gbps PHY",
@@ -1092,6 +1097,7 @@ static struct phy_driver realtek_drvs[] = {
.resume = rtlgen_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
+ .soft_reset = genphy_soft_reset,
}, {
PHY_ID_MATCH_EXACT(0x001cc961),
.name = "RTL8366RB Gigabit Ethernet",
Some vendor bootloaders do weird things with those PHYs which result in link modes being reported wrongly. Start from a clean sheet by resetting the PHY. Reported-by: Yevhen Kolomeiko <jarvis2709@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- drivers/net/phy/realtek.c | 6 ++++++ 1 file changed, 6 insertions(+)