@@ -5,7 +5,9 @@ TEST_PROGS := \
bond-arp-interval-causes-panic.sh \
bond-break-lacpdu-tx.sh \
bond-lladdr-target.sh \
- dev_addr_lists.sh
+ dev_addr_lists.sh \
+ mode-1-recovery-updelay.sh \
+ mode-2-recovery-updelay.sh
TEST_FILES := \
lag_lib.sh \
@@ -1,6 +1,8 @@
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
+NAMESPACES=""
+
# Test that a link aggregation device (bonding, team) removes the hardware
# addresses that it adds on its underlying devices.
test_LAG_cleanup()
@@ -59,3 +61,107 @@ test_LAG_cleanup()
log_test "$driver cleanup mode $mode"
}
+
+# Build a generic 2 node net namespace with 2 connections
+# between the namespaces
+#
+# +-----------+ +-----------+
+# | node1 | | node2 |
+# | | | |
+# | | | |
+# | eth0 +-------+ eth0 |
+# | | | |
+# | eth1 +-------+ eth1 |
+# | | | |
+# +-----------+ +-----------+
+lag_setup2x2()
+{
+ local state=${1:-down}
+ local namespaces="lag_node1 lag_node2"
+
+ # create namespaces
+ for n in ${namespaces}; do
+ ip netns add ${n}
+ done
+
+ # wire up namespaces
+ ip link add name lag1 type veth peer name lag1-end
+ ip link set dev lag1 netns lag_node1 $state name eth0
+ ip link set dev lag1-end netns lag_node2 $state name eth0
+
+ ip link add name lag1 type veth peer name lag1-end
+ ip link set dev lag1 netns lag_node1 $state name eth1
+ ip link set dev lag1-end netns lag_node2 $state name eth1
+
+ NAMESPACES="${namespaces}"
+}
+
+# cleanup all lag related namespaces and remove the bonding module
+lag_cleanup()
+{
+ for n in ${NAMESPACES}; do
+ ip netns delete ${n} >/dev/null 2>&1 || true
+ done
+ modprobe -r bonding
+}
+
+SWITCH="lag_node1"
+CLIENT="lag_node2"
+CLIENTIP="172.20.2.1"
+SWITCHIP="172.20.2.2"
+
+lag_setup_network()
+{
+ lag_setup2x2 "down"
+
+ # create switch
+ ip netns exec ${SWITCH} ip link add br0 up type bridge
+ ip netns exec ${SWITCH} ip link set eth0 master br0 up
+ ip netns exec ${SWITCH} ip link set eth1 master br0 up
+ ip netns exec ${SWITCH} ip addr add ${SWITCHIP}/24 dev br0
+}
+
+lag_reset_network()
+{
+ ip netns exec ${CLIENT} ip link del bond0
+ ip netns exec ${SWITCH} ip link set eth0 up
+ ip netns exec ${SWITCH} ip link set eth1 up
+}
+
+create_bond()
+{
+ # create client
+ ip netns exec ${CLIENT} ip link set eth0 down
+ ip netns exec ${CLIENT} ip link set eth1 down
+
+ ip netns exec ${CLIENT} ip link add bond0 type bond $@
+ ip netns exec ${CLIENT} ip link set eth0 master bond0
+ ip netns exec ${CLIENT} ip link set eth1 master bond0
+ ip netns exec ${CLIENT} ip link set bond0 up
+ ip netns exec ${CLIENT} ip addr add ${CLIENTIP}/24 dev bond0
+}
+
+test_bond_recovery()
+{
+ RET=0
+
+ create_bond $@
+
+ # verify connectivity
+ ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1
+ check_err $? "No connectivity"
+
+ # force the links of the bond down
+ ip netns exec ${SWITCH} ip link set eth0 down
+ sleep 2
+ ip netns exec ${SWITCH} ip link set eth0 up
+ ip netns exec ${SWITCH} ip link set eth1 down
+
+ # re-verify connectivity
+ ip netns exec ${CLIENT} ping ${SWITCHIP} -c 2 >/dev/null 2>&1
+
+ local rc=$?
+ check_err $rc "Bond failed to recover"
+ log_test "$1 ($2) bond recovery"
+ lag_reset_network
+}
new file mode 100755
@@ -0,0 +1,45 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+# When the bond is configured with down/updelay and the link state of
+# slave members flaps if there are no remaining members up the bond
+# should immediately select a member to bring up. (from bonding.txt
+# section 13.1 paragraph 4)
+#
+# +-------------+ +-----------+
+# | client | | switch |
+# | | | |
+# | +--------| link1 |-----+ |
+# | | +-------+ | |
+# | | | | | |
+# | | +-------+ | |
+# | | bond | link2 | Br0 | |
+# +-------------+ +-----------+
+# 172.20.2.1 172.20.2.2
+
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+source "$lib_dir"/lag_lib.sh
+
+cleanup()
+{
+ lag_cleanup
+}
+
+trap cleanup 0 1 2
+
+lag_setup_network
+test_bond_recovery mode 1 miimon 100 updelay 0
+test_bond_recovery mode 1 miimon 100 updelay 200
+test_bond_recovery mode 1 miimon 100 updelay 500
+test_bond_recovery mode 1 miimon 100 updelay 1000
+test_bond_recovery mode 1 miimon 100 updelay 2000
+test_bond_recovery mode 1 miimon 100 updelay 5000
+test_bond_recovery mode 1 miimon 100 updelay 10000
+
+exit "$EXIT_STATUS"
new file mode 100755
@@ -0,0 +1,45 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+# When the bond is configured with down/updelay and the link state of
+# slave members flaps if there are no remaining members up the bond
+# should immediately select a member to bring up. (from bonding.txt
+# section 13.1 paragraph 4)
+#
+# +-------------+ +-----------+
+# | client | | switch |
+# | | | |
+# | +--------| link1 |-----+ |
+# | | +-------+ | |
+# | | | | | |
+# | | +-------+ | |
+# | | bond | link2 | Br0 | |
+# +-------------+ +-----------+
+# 172.20.2.1 172.20.2.2
+
+
+REQUIRE_MZ=no
+REQUIRE_JQ=no
+NUM_NETIFS=0
+lib_dir=$(dirname "$0")
+source "$lib_dir"/net_forwarding_lib.sh
+source "$lib_dir"/lag_lib.sh
+
+cleanup()
+{
+ lag_cleanup
+}
+
+trap cleanup 0 1 2
+
+lag_setup_network
+test_bond_recovery mode 2 miimon 100 updelay 0
+test_bond_recovery mode 2 miimon 100 updelay 200
+test_bond_recovery mode 2 miimon 100 updelay 500
+test_bond_recovery mode 2 miimon 100 updelay 1000
+test_bond_recovery mode 2 miimon 100 updelay 2000
+test_bond_recovery mode 2 miimon 100 updelay 5000
+test_bond_recovery mode 2 miimon 100 updelay 10000
+
+exit "$EXIT_STATUS"
@@ -1 +1 @@
-timeout=60
+timeout=120
Verify when a bond is configured with {up,down}delay and the link state of slave members flaps if there are no remaining members up the bond should immediately select a member to bring up. (from bonding.txt section 13.1 paragraph 4) Suggested-by: Liang Li <liali@redhat.com> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> --- Notes: v2: * reduced the number of icmp echos to two (-c 2) and removed the unneeded `return 0` from function `test_bond_recovery`. .../selftests/drivers/net/bonding/Makefile | 4 +- .../selftests/drivers/net/bonding/lag_lib.sh | 106 ++++++++++++++++++ .../net/bonding/mode-1-recovery-updelay.sh | 45 ++++++++ .../net/bonding/mode-2-recovery-updelay.sh | 45 ++++++++ .../selftests/drivers/net/bonding/settings | 2 +- 5 files changed, 200 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/mode-1-recovery-updelay.sh create mode 100755 tools/testing/selftests/drivers/net/bonding/mode-2-recovery-updelay.sh