new file mode 100644
@@ -0,0 +1,639 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+CTU CAN FD Driver
+=================
+
+Author: Martin Jerabek <martin.jerabek01@gmail.com>
+
+
+About CTU CAN FD IP Core
+------------------------
+
+`CTU CAN FD <https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core>`_
+is an open source soft core written in VHDL.
+It originated in 2015 as Ondrej Ille's project
+at the `Department of Measurement <https://meas.fel.cvut.cz/>`_
+of `FEE <http://www.fel.cvut.cz/en/>`_ at `CTU <https://www.cvut.cz/en>`_.
+
+The SocketCAN driver for Xilinx Zynq SoC based MicroZed board
+`Vivado integration <https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top>`_
+and Intel Cyclone V 5CSEMA4U23C6 based DE0-Nano-SoC Terasic board
+`QSys integration <https://gitlab.fel.cvut.cz/canbus/intel-soc-ctucanfd>`_
+has been developed as well as support for
+`PCIe integration <https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd>`_ of the core.
+
+In the case of Zynq, the core is connected via the APB system bus, which does
+not have enumeration support, and the device must be specified in Device Tree.
+This kind of devices is called platform device in the kernel and is
+handled by a platform device driver.
+
+The basic functional model of the CTU CAN FD peripheral has been
+accepted into QEMU mainline. See QEMU `CAN emulation support <https://www.qemu.org/docs/master/system/devices/can.html>`_
+for CAN FD buses, host connection and CTU CAN FD core emulation. The development
+version of emulation support can be cloned from ctu-canfd branch of QEMU local
+development `repository <https://gitlab.fel.cvut.cz/canbus/qemu-canbus>`_.
+
+
+About SocketCAN
+---------------
+
+SocketCAN is a standard common interface for CAN devices in the Linux
+kernel. As the name suggests, the bus is accessed via sockets, similarly
+to common network devices. The reasoning behind this is in depth
+described in `Linux SocketCAN <https://www.kernel.org/doc/html/latest/networking/can.html>`_.
+In short, it offers a
+natural way to implement and work with higher layer protocols over CAN,
+in the same way as, e.g., UDP/IP over Ethernet.
+
+Device probe
+~~~~~~~~~~~~
+
+Before going into detail about the structure of a CAN bus device driver,
+let's reiterate how the kernel gets to know about the device at all.
+Some buses, like PCI or PCIe, support device enumeration. That is, when
+the system boots, it discovers all the devices on the bus and reads
+their configuration. The kernel identifies the device via its vendor ID
+and device ID, and if there is a driver registered for this identifier
+combination, its probe method is invoked to populate the driver's
+instance for the given hardware. A similar situation goes with USB, only
+it allows for device hot-plug.
+
+The situation is different for peripherals which are directly embedded
+in the SoC and connected to an internal system bus (AXI, APB, Avalon,
+and others). These buses do not support enumeration, and thus the kernel
+has to learn about the devices from elsewhere. This is exactly what the
+Device Tree was made for.
+
+Device tree
+~~~~~~~~~~~
+
+An entry in device tree states that a device exists in the system, how
+it is reachable (on which bus it resides) and its configuration –
+registers address, interrupts and so on. An example of such a device
+tree is given in .
+
+.. code:: raw
+
+ / {
+ /* ... */
+ amba: amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+
+ CTU_CAN_FD_0: CTU_CAN_FD@43c30000 {
+ compatible = "ctu,ctucanfd";
+ interrupt-parent = <&intc>;
+ interrupts = <0 30 4>;
+ clocks = <&clkc 15>;
+ reg = <0x43c30000 0x10000>;
+ };
+ };
+ };
+
+
+.. _sec:socketcan:drv:
+
+Driver structure
+~~~~~~~~~~~~~~~~
+
+The driver can be divided into two parts – platform-dependent device
+discovery and set up, and platform-independent CAN network device
+implementation.
+
+.. _sec:socketcan:platdev:
+
+Platform device driver
+^^^^^^^^^^^^^^^^^^^^^^
+
+In the case of Zynq, the core is connected via the AXI system bus, which
+does not have enumeration support, and the device must be specified in
+Device Tree. This kind of devices is called *platform device* in the
+kernel and is handled by a *platform device driver*\ [1]_.
+
+A platform device driver provides the following things:
+
+- A *probe* function
+
+- A *remove* function
+
+- A table of *compatible* devices that the driver can handle
+
+The *probe* function is called exactly once when the device appears (or
+the driver is loaded, whichever happens later). If there are more
+devices handled by the same driver, the *probe* function is called for
+each one of them. Its role is to allocate and initialize resources
+required for handling the device, as well as set up low-level functions
+for the platform-independent layer, e.g., *read_reg* and *write_reg*.
+After that, the driver registers the device to a higher layer, in our
+case as a *network device*.
+
+The *remove* function is called when the device disappears, or the
+driver is about to be unloaded. It serves to free the resources
+allocated in *probe* and to unregister the device from higher layers.
+
+Finally, the table of *compatible* devices states which devices the
+driver can handle. The Device Tree entry ``compatible`` is matched
+against the tables of all *platform drivers*.
+
+.. code:: c
+
+ /* Match table for OF platform binding */
+ static const struct of_device_id ctucan_of_match[] = {
+ { .compatible = "ctu,canfd-2", },
+ { .compatible = "ctu,ctucanfd", },
+ { /* end of list */ },
+ };
+ MODULE_DEVICE_TABLE(of, ctucan_of_match);
+
+ static int ctucan_probe(struct platform_device *pdev);
+ static int ctucan_remove(struct platform_device *pdev);
+
+ static struct platform_driver ctucanfd_driver = {
+ .probe = ctucan_probe,
+ .remove = ctucan_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = ctucan_of_match,
+ },
+ };
+ module_platform_driver(ctucanfd_driver);
+
+
+.. _sec:socketcan:netdev:
+
+Network device driver
+^^^^^^^^^^^^^^^^^^^^^
+
+Each network device must support at least these operations:
+
+- Bring the device up: ``ndo_open``
+
+- Bring the device down: ``ndo_close``
+
+- Submit TX frames to the device: ``ndo_start_xmit``
+
+- Signal TX completion and errors to the network subsystem: ISR
+
+- Submit RX frames to the network subsystem: ISR and NAPI
+
+There are two possible event sources: the device and the network
+subsystem. Device events are usually signaled via an interrupt, handled
+in an Interrupt Service Routine (ISR). Handlers for the events
+originating in the network subsystem are then specified in
+``struct net_device_ops``.
+
+When the device is brought up, e.g., by calling ``ip link set can0 up``,
+the driver’s function ``ndo_open`` is called. It should validate the
+interface configuration and configure and enable the device. The
+analogous opposite is ``ndo_close``, called when the device is being
+brought down, be it explicitly or implicitly.
+
+When the system should transmit a frame, it does so by calling
+``ndo_start_xmit``, which enqueues the frame into the device. If the
+device HW queue (FIFO, mailboxes or whatever the implementation is)
+becomes full, the ``ndo_start_xmit`` implementation informs the network
+subsystem that it should stop the TX queue (via ``netif_stop_queue``).
+It is then re-enabled later in ISR when the device has some space
+available again and is able to enqueue another frame.
+
+All the device events are handled in ISR, namely:
+
+#. **TX completion**. When the device successfully finishes transmitting
+ a frame, the frame is echoed locally. On error, an informative error
+ frame [2]_ is sent to the network subsystem instead. In both cases,
+ the software TX queue is resumed so that more frames may be sent.
+
+#. **Error condition**. If something goes wrong (e.g., the device goes
+ bus-off or RX overrun happens), error counters are updated, and
+ informative error frames are enqueued to SW RX queue.
+
+#. **RX buffer not empty**. In this case, read the RX frames and enqueue
+ them to SW RX queue. Usually NAPI is used as a middle layer (see ).
+
+.. _sec:socketcan:napi:
+
+NAPI
+~~~~
+
+The frequency of incoming frames can be high and the overhead to invoke
+the interrupt service routine for each frame can cause significant
+system load. There are multiple mechanisms in the Linux kernel to deal
+with this situation. They evolved over the years of Linux kernel
+development and enhancements. For network devices, the current standard
+is NAPI – *the New API*. It is similar to classical top-half/bottom-half
+interrupt handling in that it only acknowledges the interrupt in the ISR
+and signals that the rest of the processing should be done in softirq
+context. On top of that, it offers the possibility to *poll* for new
+frames for a while. This has a potential to avoid the costly round of
+enabling interrupts, handling an incoming IRQ in ISR, re-enabling the
+softirq and switching context back to softirq.
+
+More detailed documentation of NAPI may be found on the pages of Linux
+Foundation `<https://wiki.linuxfoundation.org/networking/napi>`_.
+
+Integrating the core to Xilinx Zynq
+-----------------------------------
+
+The core interfaces a simple subset of the Avalon
+(search for Intel **Avalon Interface Specifications**)
+bus as it was originally used on
+Alterra FPGA chips, yet Xilinx natively interfaces with AXI
+(search for ARM **AMBA AXI and ACE Protocol Specification AXI3,
+AXI4, and AXI4-Lite, ACE and ACE-Lite**).
+The most obvious solution would be to use
+an Avalon/AXI bridge or implement some simple conversion entity.
+However, the core’s interface is half-duplex with no handshake
+signaling, whereas AXI is full duplex with two-way signaling. Moreover,
+even AXI-Lite slave interface is quite resource-intensive, and the
+flexibility and speed of AXI are not required for a CAN core.
+
+Thus a much simpler bus was chosen – APB (Advanced Peripheral Bus)
+(search for ARM **AMBA APB Protocol Specification**).
+APB-AXI bridge is directly available in
+Xilinx Vivado, and the interface adaptor entity is just a few simple
+combinatorial assignments.
+
+Finally, to be able to include the core in a block diagram as a custom
+IP, the core, together with the APB interface, has been packaged as a
+Vivado component.
+
+CTU CAN FD Driver design
+------------------------
+
+The general structure of a CAN device driver has already been examined
+in . The next paragraphs provide a more detailed description of the CTU
+CAN FD core driver in particular.
+
+Low-level driver
+~~~~~~~~~~~~~~~~
+
+The core is not intended to be used solely with SocketCAN, and thus it
+is desirable to have an OS-independent low-level driver. This low-level
+driver can then be used in implementations of OS driver or directly
+either on bare metal or in a user-space application. Another advantage
+is that if the hardware slightly changes, only the low-level driver
+needs to be modified.
+
+The code [3]_ is in part automatically generated and in part written
+manually by the core author, with contributions of the thesis’ author.
+The low-level driver supports operations such as: set bit timing, set
+controller mode, enable/disable, read RX frame, write TX frame, and so
+on.
+
+Configuring bit timing
+~~~~~~~~~~~~~~~~~~~~~~
+
+On CAN, each bit is divided into four segments: SYNC, PROP, PHASE1, and
+PHASE2. Their duration is expressed in multiples of a Time Quantum
+(details in `CAN Specification, Version 2.0 <http://esd.cs.ucr.edu/webres/can20.pdf>`_, chapter 8).
+When configuring
+bitrate, the durations of all the segments (and time quantum) must be
+computed from the bitrate and Sample Point. This is performed
+independently for both the Nominal bitrate and Data bitrate for CAN FD.
+
+SocketCAN is fairly flexible and offers either highly customized
+configuration by setting all the segment durations manually, or a
+convenient configuration by setting just the bitrate and sample point
+(and even that is chosen automatically per Bosch recommendation if not
+specified). However, each CAN controller may have different base clock
+frequency and different width of segment duration registers. The
+algorithm thus needs the minimum and maximum values for the durations
+(and clock prescaler) and tries to optimize the numbers to fit both the
+constraints and the requested parameters.
+
+.. code:: c
+
+ struct can_bittiming_const {
+ char name[16]; /* Name of the CAN controller hardware */
+ __u32 tseg1_min; /* Time segment 1 = prop_seg + phase_seg1 */
+ __u32 tseg1_max;
+ __u32 tseg2_min; /* Time segment 2 = phase_seg2 */
+ __u32 tseg2_max;
+ __u32 sjw_max; /* Synchronisation jump width */
+ __u32 brp_min; /* Bit-rate prescaler */
+ __u32 brp_max;
+ __u32 brp_inc;
+ };
+
+
+[lst:can_bittiming_const]
+
+A curious reader will notice that the durations of the segments PROP_SEG
+and PHASE_SEG1 are not determined separately but rather combined and
+then, by default, the resulting TSEG1 is evenly divided between PROP_SEG
+and PHASE_SEG1. In practice, this has virtually no consequences as the
+sample point is between PHASE_SEG1 and PHASE_SEG2. In CTU CAN FD,
+however, the duration registers ``PROP`` and ``PH1`` have different
+widths (6 and 7 bits, respectively), so the auto-computed values might
+overflow the shorter register and must thus be redistributed among the
+two [4]_.
+
+Handling RX
+~~~~~~~~~~~
+
+Frame reception is handled in NAPI queue, which is enabled from ISR when
+the RXNE (RX FIFO Not Empty) bit is set. Frames are read one by one
+until either no frame is left in the RX FIFO or the maximum work quota
+has been reached for the NAPI poll run (see ). Each frame is then passed
+to the network interface RX queue.
+
+An incoming frame may be either a CAN 2.0 frame or a CAN FD frame. The
+way to distinguish between these two in the kernel is to allocate either
+``struct can_frame`` or ``struct canfd_frame``, the two having different
+sizes. In the controller, the information about the frame type is stored
+in the first word of RX FIFO.
+
+This brings us a chicken-egg problem: we want to allocate the ``skb``
+for the frame, and only if it succeeds, fetch the frame from FIFO;
+otherwise keep it there for later. But to be able to allocate the
+correct ``skb``, we have to fetch the first work of FIFO. There are
+several possible solutions:
+
+#. Read the word, then allocate. If it fails, discard the rest of the
+ frame. When the system is low on memory, the situation is bad anyway.
+
+#. Always allocate ``skb`` big enough for an FD frame beforehand. Then
+ tweak the ``skb`` internals to look like it has been allocated for
+ the smaller CAN 2.0 frame.
+
+#. Add option to peek into the FIFO instead of consuming the word.
+
+#. If the allocation fails, store the read word into driver’s data. On
+ the next try, use the stored word instead of reading it again.
+
+Option 1 is simple enough, but not very satisfying if we could do
+better. Option 2 is not acceptable, as it would require modifying the
+private state of an integral kernel structure. The slightly higher
+memory consumption is just a virtual cherry on top of the “cake”. Option
+3 requires non-trivial HW changes and is not ideal from the HW point of
+view.
+
+Option 4 seems like a good compromise, with its disadvantage being that
+a partial frame may stay in the FIFO for a prolonged time. Nonetheless,
+there may be just one owner of the RX FIFO, and thus no one else should
+see the partial frame (disregarding some exotic debugging scenarios).
+Basides, the driver resets the core on its initialization, so the
+partial frame cannot be “adopted” either. In the end, option 4 was
+selected [5]_.
+
+.. _subsec:ctucanfd:rxtimestamp:
+
+Timestamping RX frames
+^^^^^^^^^^^^^^^^^^^^^^
+
+The CTU CAN FD core reports the exact timestamp when the frame has been
+received. The timestamp is by default captured at the sample point of
+the last bit of EOF but is configurable to be captured at the SOF bit.
+The timestamp source is external to the core and may be up to 64 bits
+wide. At the time of writing, passing the timestamp from kernel to
+userspace is not yet implemented, but is planned in the future.
+
+Handling TX
+~~~~~~~~~~~
+
+The CTU CAN FD core has 4 independent TX buffers, each with its own
+state and priority. When the core wants to transmit, a TX buffer in
+Ready state with the highest priority is selected.
+
+The priorities are 3bit numbers in register TX_PRIORITY
+(nibble-aligned). This should be flexible enough for most use cases.
+SocketCAN, however, supports only one FIFO queue for outgoing
+frames [6]_. The buffer priorities may be used to simulate the FIFO
+behavior by assigning each buffer a distinct priority and *rotating* the
+priorities after a frame transmission is completed.
+
+In addition to priority rotation, the SW must maintain head and tail
+pointers into the FIFO formed by the TX buffers to be able to determine
+which buffer should be used for next frame (``txb_head``) and which
+should be the first completed one (``txb_tail``). The actual buffer
+indices are (obviously) modulo 4 (number of TX buffers), but the
+pointers must be at least one bit wider to be able to distinguish
+between FIFO full and FIFO empty – in this situation,
+:math:`txb\_head \equiv txb\_tail\ (\textrm{mod}\ 4)`. An example of how
+the FIFO is maintained, together with priority rotation, is depicted in
+
+|
+
++------+---+---+---+---+
+| TXB# | 0 | 1 | 2 | 3 |
++======+===+===+===+===+
+| Seq | A | B | C | |
++------+---+---+---+---+
+| Prio | 7 | 6 | 5 | 4 |
++------+---+---+---+---+
+| | | T | | H |
++------+---+---+---+---+
+
+|
+
++------+---+---+---+---+
+| TXB# | 0 | 1 | 2 | 3 |
++======+===+===+===+===+
+| Seq | | B | C | |
++------+---+---+---+---+
+| Prio | 4 | 7 | 6 | 5 |
++------+---+---+---+---+
+| | | T | | H |
++------+---+---+---+---+
+
+|
+
++------+---+---+---+---+----+
+| TXB# | 0 | 1 | 2 | 3 | 0’ |
++======+===+===+===+===+====+
+| Seq | E | B | C | D | |
++------+---+---+---+---+----+
+| Prio | 4 | 7 | 6 | 5 | |
++------+---+---+---+---+----+
+| | | T | | | H |
++------+---+---+---+---+----+
+
+|
+
+.. figure:: fsm_txt_buffer_user.svg
+
+ TX Buffer states with possible transitions
+
+.. _subsec:ctucanfd:txtimestamp:
+
+Timestamping TX frames
+^^^^^^^^^^^^^^^^^^^^^^
+
+When submitting a frame to a TX buffer, one may specify the timestamp at
+which the frame should be transmitted. The frame transmission may start
+later, but not sooner. Note that the timestamp does not participate in
+buffer prioritization – that is decided solely by the mechanism
+described above.
+
+Support for time-based packet transmission was recently merged to Linux
+v4.19 `Time-based packet transmission <https://lwn.net/Articles/748879/>`_,
+but it remains yet to be researched
+whether this functionality will be practical for CAN.
+
+Also similarly to retrieving the timestamp of RX frames, the core
+supports retrieving the timestamp of TX frames – that is the time when
+the frame was successfully delivered. The particulars are very similar
+to timestamping RX frames and are described in .
+
+Handling RX buffer overrun
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When a received frame does no more fit into the hardware RX FIFO in its
+entirety, RX FIFO overrun flag (STATUS[DOR]) is set and Data Overrun
+Interrupt (DOI) is triggered. When servicing the interrupt, care must be
+taken first to clear the DOR flag (via COMMAND[CDO]) and after that
+clear the DOI interrupt flag. Otherwise, the interrupt would be
+immediately [7]_ rearmed.
+
+**Note**: During development, it was discussed whether the internal HW
+pipelining cannot disrupt this clear sequence and whether an additional
+dummy cycle is necessary between clearing the flag and the interrupt. On
+the Avalon interface, it indeed proved to be the case, but APB being
+safe because it uses 2-cycle transactions. Essentially, the DOR flag
+would be cleared, but DOI register’s Preset input would still be high
+the cycle when the DOI clear request would also be applied (by setting
+the register’s Reset input high). As Set had higher priority than Reset,
+the DOI flag would not be reset. This has been already fixed by swapping
+the Set/Reset priority (see issue #187).
+
+Reporting Error Passive and Bus Off conditions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It may be desirable to report when the node reaches *Error Passive*,
+*Error Warning*, and *Bus Off* conditions. The driver is notified about
+error state change by an interrupt (EPI, EWLI), and then proceeds to
+determine the core’s error state by reading its error counters.
+
+There is, however, a slight race condition here – there is a delay
+between the time when the state transition occurs (and the interrupt is
+triggered) and when the error counters are read. When EPI is received,
+the node may be either *Error Passive* or *Bus Off*. If the node goes
+*Bus Off*, it obviously remains in the state until it is reset.
+Otherwise, the node is *or was* *Error Passive*. However, it may happen
+that the read state is *Error Warning* or even *Error Active*. It may be
+unclear whether and what exactly to report in that case, but I
+personally entertain the idea that the past error condition should still
+be reported. Similarly, when EWLI is received but the state is later
+detected to be *Error Passive*, *Error Passive* should be reported.
+
+
+CTU CAN FD Driver Sources Reference
+-----------------------------------
+
+.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd.h
+ :internal:
+
+.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd_base.c
+ :internal:
+
+.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd_pci.c
+ :internal:
+
+.. kernel-doc:: drivers/net/can/ctucanfd/ctucanfd_platform.c
+ :internal:
+
+CTU CAN FD IP Core and Driver Development Acknowledgment
+---------------------------------------------------------
+
+* Odrej Ille <illeondr@fel.cvut.cz>
+
+ * started the project as student at Department of Measurement, FEE, CTU
+ * invested great amount of personal time and enthusiasm to the project over years
+ * worked on more funded tasks
+
+* `Department of Measurement <https://meas.fel.cvut.cz/>`_,
+ `Faculty of Electrical Engineering <http://www.fel.cvut.cz/en/>`_,
+ `Czech Technical University <https://www.cvut.cz/en>`_
+
+ * is the main investor into the project over many years
+ * uses project in their CAN/CAN FD diagnostics framework for `Skoda Auto <https://www.skoda-auto.cz/>`_
+
+* `Digiteq Automotive <https://www.digiteqautomotive.com/en>`_
+
+ * funding of the project CAN FD Open Cores Support Linux Kernel Based Systems
+ * negotiated and paid CTU to allow public access to the project
+ * provided additional funding of the work
+
+* `Department of Control Engineering <https://control.fel.cvut.cz/en>`_,
+ `Faculty of Electrical Engineering <http://www.fel.cvut.cz/en/>`_,
+ `Czech Technical University <https://www.cvut.cz/en>`_
+
+ * solving the project CAN FD Open Cores Support Linux Kernel Based Systems
+ * providing GitLab management
+ * virtual servers and computational power for continuous integration
+ * providing hardware for HIL continuous integration tests
+
+* `PiKRON Ltd. <http://pikron.com/>`_
+
+ * minor funding to initiate preparation of the project open-sourcing
+
+* Petr Porazil <porazil@pikron.com>
+
+ * design of PCIe transceiver addon board and assembly of boards
+ * design and assembly of MZ_APO baseboard for MicroZed/Zynq based system
+
+* Martin Jerabek <martin.jerabek01@gmail.com>
+
+ * Linux driver development
+ * continuous integration platform architect and GHDL updates
+ * theses `Open-source and Open-hardware CAN FD Protocol Support <https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf>`_
+
+* Jiri Novak <jnovak@fel.cvut.cz>
+
+ * project initiation, management and use at Department of Measurement, FEE, CTU
+
+* Pavel Pisa <pisa@cmp.felk.cvut.cz>
+
+ * initiate open-sourcing, project coordination, management at Department of Control Engineering, FEE, CTU
+
+* Jaroslav Beran<jara.beran@gmail.com>
+
+ * system integration for Intel SoC, core and driver testing and updates
+
+* Carsten Emde (`OSADL <https://www.osadl.org/>`_)
+
+ * provided OSADL expertise to discuss IP core licensing
+ * pointed to possible deadlock for LGPL and CAN bus possible patent case which lead to relicense IP core design to BSD like license
+
+* Reiner Zitzmann and Holger Zeltwanger (`CAN in Automation <https://www.can-cia.org/>`_)
+
+ * provided suggestions and help to inform community about the project and invited us to events focused on CAN bus future development directions
+
+* Jan Charvat
+
+ * implemented CTU CAN FD functional model for QEMU which has been integrated into QEMU mainline (`docs/system/devices/can.rst <https://www.qemu.org/docs/master/system/devices/can.html>`_)
+ * Bachelor theses Model of CAN FD Communication Controller for QEMU Emulator
+
+Notes
+-----
+
+
+.. [1]
+ Other buses have their own specific driver interface to set up the
+ device.
+
+.. [2]
+ Not to be mistaken with CAN Error Frame. This is a ``can_frame`` with
+ ``CAN_ERR_FLAG`` set and some error info in its ``data`` field.
+
+.. [3]
+ Available in CTU CAN FD repository
+ `<https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core>`_
+
+.. [4]
+ As is done in the low-level driver functions
+ ``ctucan_hw_set_nom_bittiming`` and
+ ``ctucan_hw_set_data_bittiming``.
+
+.. [5]
+ At the time of writing this thesis, option 1 is still being used and
+ the modification is queued in gitlab issue #222
+
+.. [6]
+ Strictly speaking, multiple CAN TX queues are supported since v4.19
+ `can: enable multi-queue for SocketCAN devices <https://lore.kernel.org/patchwork/patch/913526/>`_ but no mainline driver is using
+ them yet.
+
+.. [7]
+ Or rather in the next clock cycle
new file mode 100644
@@ -0,0 +1,151 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="113.611mm" height="86.6873mm" version="1.1" viewBox="0 0 113.611 86.6873" xmlns="http://www.w3.org/2000/svg" xmlns:cc="http://creativecommons.org/ns#" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
+ <defs>
+ <marker id="marker3667" overflow="visible" orient="auto">
+ <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="marker3517" overflow="visible" orient="auto">
+ <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="marker3373" overflow="visible" orient="auto">
+ <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="marker3199" overflow="visible" orient="auto">
+ <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="marker3037" overflow="visible" orient="auto">
+ <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="marker2779" overflow="visible" orient="auto">
+ <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="marker2477" overflow="visible" orient="auto">
+ <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="marker2074" overflow="visible" orient="auto">
+ <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="marker1964" overflow="visible" orient="auto">
+ <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="marker1856" overflow="visible" orient="auto">
+ <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <marker id="Arrow2Mend" overflow="visible" orient="auto">
+ <path transform="scale(.6) rotate(180) translate(0)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill-rule="evenodd" stroke="#000" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <filter id="filter1204" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB">
+ <feGaussianBlur stdDeviation="0.00018829868"/>
+ </filter>
+ <marker id="marker2074-3" overflow="visible" orient="auto">
+ <path transform="scale(-.6)" d="m8.71859 4.03374-10.9259-4.01772 10.9259-4.01772c-1.7455 2.37206-1.73544 5.61745-6e-7 8.03544z" fill="#28a4ff" fill-rule="evenodd" stroke="#28a4ff" stroke-linejoin="round" stroke-width=".625"/>
+ </marker>
+ <filter id="filter1204-6" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB">
+ <feGaussianBlur stdDeviation="0.00018829868"/>
+ </filter>
+ <filter id="filter1204-6-9" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB">
+ <feGaussianBlur stdDeviation="0.00018829868"/>
+ </filter>
+ <filter id="filter1204-6-2" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB">
+ <feGaussianBlur stdDeviation="0.00018829868"/>
+ </filter>
+ <filter id="filter1204-6-2-9" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB">
+ <feGaussianBlur stdDeviation="0.00018829868"/>
+ </filter>
+ <filter id="filter1204-6-2-9-4" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB">
+ <feGaussianBlur stdDeviation="0.00018829868"/>
+ </filter>
+ <filter id="filter1204-6-2-9-1" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB">
+ <feGaussianBlur stdDeviation="0.00018829868"/>
+ </filter>
+ <filter id="filter1204-6-2-9-1-3" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB">
+ <feGaussianBlur stdDeviation="0.00018829868"/>
+ </filter>
+ <filter id="filter1204-6-2-9-1-3-1" x="-4.19953e-6" y="-5.60084e-6" width="1.00001" height="1.00001" color-interpolation-filters="sRGB">
+ <feGaussianBlur stdDeviation="0.00018829868"/>
+ </filter>
+ </defs>
+ <metadata>
+ <rdf:RDF>
+ <cc:Work rdf:about="">
+ <dc:format>image/svg+xml</dc:format>
+ <dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/>
+ <dc:title/>
+ </cc:Work>
+ </rdf:RDF>
+ </metadata>
+ <g transform="translate(-49.0277 -104.823)">
+ <g>
+ <path d="m130.534 165.429h-71.1816v-17.5315" fill="none" marker-end="url(#marker2477)" stroke="#28a4ff" stroke-width=".6"/>
+ <path d="m145.034 122.959v-11.5914h-43.1215" fill="none" marker-end="url(#marker3037)" stroke="#28a4ff" stroke-width=".6"/>
+ <rect x="130.679" y="122.933" width="28.2965" height="45.2319" rx="0" ry="0" fill="#e5e5e5" stroke="#717171" stroke-linecap="square" stroke-width=".499999"/>
+ <path d="m102.044 116.236h23.3126l-0.13388 18.8185h19.9383v3.66603" fill="none" marker-end="url(#marker3199)" stroke="#28a4ff" stroke-width=".6"/>
+ <path d="m59.5006 138.391v-24.2517h20.6338" fill="none" marker-end="url(#marker2779)" stroke="#28a4ff" stroke-width=".6"/>
+ <rect x="78.1389" y="126.411" width="28.0037" height="35.0443" rx="0" ry="0" fill="#e5e5e5" stroke="#717171" stroke-linecap="square" stroke-width=".5"/>
+ </g>
+ <g fill="#ffcb35" stroke="#000" stroke-linecap="square">
+ <ellipse cx="92.1408" cy="114.239" rx="10.8866" ry="4.39308" stroke-width=".5"/>
+ <ellipse cx="92.1408" cy="134.185" rx="10.8866" ry="4.39308" stroke-width=".499999"/>
+ <ellipse cx="92.1408" cy="152.199" rx="10.8866" ry="4.39308" stroke-width=".499999"/>
+ </g>
+ <g fill="#28a4ff" stroke="#000" stroke-linecap="square" stroke-width=".499999">
+ <ellipse cx="144.827" cy="143.316" rx="10.8866" ry="4.39308"/>
+ <ellipse cx="144.827" cy="159.143" rx="10.8866" ry="4.39308"/>
+ <ellipse cx="59.4364" cy="142.823" rx="7.36455" ry="4.39308"/>
+ <ellipse cx="144.827" cy="129.196" rx="10.8866" ry="4.39308"/>
+ <ellipse cx="143.077" cy="180.53" rx="10.8866" ry="4.39308"/>
+ </g>
+ <ellipse cx="110.386" cy="180.53" rx="10.8866" ry="4.39308" fill="#ffcb35" stroke="#000" stroke-linecap="square" stroke-width=".499999"/>
+ <text x="110.90907" y="179.42688" font-size="3.175px" xml:space="preserve"><tspan x="110.90907" y="179.42688" dy="0.60000002" text-align="center" text-anchor="middle">Accessible</tspan><tspan x="110.90907" y="183.39563"><tspan font-size="3.175px" text-align="center" text-anchor="middle">for S</tspan>W</tspan></text>
+ <text x="143.5869" y="179.52795" xml:space="preserve"><tspan x="143.5869" y="179.52795" dy="1 0 0 0 0 0" font-family="sans-serif" font-size="2.82222px" text-align="center" text-anchor="middle" style="font-variant-caps:normal;font-variant-east-asian:normal;font-variant-ligatures:normal;font-variant-numeric:normal">Inaccessible</tspan><tspan x="143.5869" y="183.36786" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">for S</tspan>W</tspan></text>
+ <g font-size="3.175px">
+ <text x="91.95018" y="115.29005" xml:space="preserve"><tspan x="91.95018" y="115.29005" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Ready</tspan></tspan></text>
+ <text x="145.25127" y="130.49019" xml:space="preserve"><tspan x="145.25127" y="130.49019" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">TX OK</tspan></tspan></text>
+ <text x="145.31845" y="144.43121" xml:space="preserve"><tspan x="145.31845" y="144.43121" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Aborted</tspan></tspan></text>
+ <text x="145.40399" y="160.36035" xml:space="preserve"><tspan x="145.40399" y="160.36035" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">TX failed</tspan></tspan></text>
+ <text x="91.823967" y="133.53941" text-align="center" text-anchor="middle" style="line-height:0.9" xml:space="preserve"><tspan x="91.823967" y="133.53941" text-align="center"><tspan font-size="3.175px" text-align="center" text-anchor="middle">TX in</tspan></tspan><tspan x="91.823967" y="136.39691" text-align="center">progress</tspan></text>
+ <text x="91.648918" y="151.84813" text-align="center" text-anchor="middle" style="line-height:0.9" xml:space="preserve"><tspan x="91.648918" y="151.84813" text-align="center"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Abort in</tspan></tspan><tspan x="91.648918" y="154.70563" text-align="center">progress</tspan></text>
+ <text x="59.456043" y="143.91658" xml:space="preserve"><tspan x="59.456043" y="143.91658" font-size="3.175px"><tspan font-size="3.175px" text-align="center" text-anchor="middle">Empty</tspan></tspan></text>
+ </g>
+ <g fill="none">
+ <g stroke="#000">
+ <rect x="52.3943" y="171.63" width="106.581" height="16.601" rx="0" ry="0" stroke-linecap="square" stroke-width=".499999"/>
+ <g stroke-width=".6">
+ <path d="m106.383 159.046h26.4967" marker-end="url(#Arrow2Mend)"/>
+ <path d="m103.138 152.268h41.5564v-3.92426" marker-end="url(#marker1856)"/>
+ <path d="m106.38 129.354h17.7785"/>
+ <path d="m125.818 129.359h7.2418" marker-end="url(#marker1964)"/>
+ </g>
+ <path d="m124.169 129.354a0.959514 0.97091 0 0 1 0.47587-0.84557 0.959514 0.97091 0 0 1 0.96164-3e-3 0.959514 0.97091 0 0 1 0.48149 0.84231" stroke-linecap="square" stroke-width=".600001"/>
+ <path d="m55.7026 180.832h34.8131" marker-end="url(#marker2074)" stroke-width=".6"/>
+ </g>
+ <g>
+ <path d="m55.6464 185.744h34.8131" marker-end="url(#marker2074-3)" stroke="#28a4ff" stroke-width=".600001"/>
+ <g stroke-width=".6">
+ <path d="m94.0487 129.889v-10.6493" marker-end="url(#marker3373)" stroke="#000"/>
+ <path d="m89.7534 118.621v10.662" marker-end="url(#marker3517)" stroke="#000"/>
+ <path d="m92.119 138.812v7.9718" marker-end="url(#marker3667)" stroke="#28a4ff"/>
+ </g>
+ </g>
+ </g>
+ <text transform="matrix(.264583 0 0 .264583 91.8919 139.964)" x="26.959213" y="9.11724" fill="#2aa1ff" filter="url(#filter1204-6-2-9-1-3-1)" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="26.959213" y="9.11724" text-align="center">Set</tspan><tspan x="26.959213" y="22.31724" text-align="center">abort</tspan></text>
+ <text transform="translate(49.0277 104.823)" x="57.620724" y="16.855087" filter="url(#filter1204)" font-size="3.175px" text-align="center" text-anchor="middle" style="line-height:1.1" xml:space="preserve"><tspan x="57.620724" y="16.855087" text-align="center">Transmission</tspan><tspan x="57.620724" y="20.347588" text-align="center">unsuccesfull</tspan></text>
+ <g font-size="12px" stroke-width="3.77953" text-anchor="middle">
+ <text transform="matrix(.264583 0 0 .264583 68.5988 118.913)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">starts</tspan></text>
+ <text transform="matrix(.264583 0 0 .264583 106.802 130.509)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">succesfull</tspan></text>
+ <text transform="matrix(.264583 0 0 .264583 107.77 145.476)" x="38.824219" y="9.1171875" filter="url(#filter1204)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Transmission</tspan><tspan x="38.824219" y="22.317188" text-align="center">sborted</tspan></text>
+ </g>
+ <g stroke-width="3.77953" text-anchor="middle">
+ <text transform="matrix(.264583 0 0 .264583 107.574 155.948)" x="38.824219" y="9.1171875" filter="url(#filter1204)" font-size="10.6667px" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824219" y="9.1171875" text-align="center">Retransmit</tspan><tspan x="38.824219" y="20.850557" text-align="center">limit reached or</tspan><tspan x="38.824219" y="32.583927" text-align="center">node went bus off</tspan><tspan x="38.824219" y="44.317299" text-align="center"/></text>
+ <text transform="matrix(.264583 0 0 .264583 60.7127 177.384)" x="38.824539" y="9.1173134" filter="url(#filter1204-6)" font-size="12px" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="38.824539" y="9.1173134" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Transmission result</tspan></text>
+ <text transform="matrix(.264583 0 0 .264583 45.6885 173.226)" x="57.727047" y="9.11724" filter="url(#filter1204-6-9)" font-size="12px" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="57.727047" y="9.11724" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Legend:</tspan></text>
+ </g>
+ <g fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-anchor="middle">
+ <text transform="matrix(.264583 0 0 .264583 57.0045 182.079)" x="57.727047" y="9.11724" filter="url(#filter1204-6-2)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="57.727047" y="9.11724" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">SW command</tspan></text>
+ <text transform="matrix(.264583 0 0 .264583 57.7865 110.104)" x="40.822609" y="9.11724" filter="url(#filter1204-6-2-9)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="40.822609" y="9.11724" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set ready</tspan></text>
+ <text transform="matrix(.264583 0 0 .264583 116.893 107.491)" x="28.049065" y="9.1172523" filter="url(#filter1204-6-2-9-4)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="28.049065" y="9.1172523" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set ready</tspan></text>
+ <text transform="matrix(.264583 0 0 .264583 87.5687 166.324)" x="28.049065" y="9.1172523" filter="url(#filter1204-6-2-9-1)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="28.049065" y="9.1172523" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set empty</tspan></text>
+ <text transform="matrix(.264583 0 0 .264583 106.53 113.074)" x="30.228771" y="8.9063139" filter="url(#filter1204-6-2-9-1-3)" text-align="center" style="line-height:1.1" xml:space="preserve"><tspan x="30.228771" y="8.9063139" fill="#2aa1ff" font-size="12px" stroke-width="3.77953" text-align="center" text-anchor="middle">Set abort</tspan></text>
+ </g>
+ </g>
+</svg>