diff mbox series

[net-next,v2,3/8] udp: properly complete L4 GRO over UDP tunnel packet

Message ID 88b8993a835f87440fd875bcbb080d8b7f6ab1bb.1616692794.git.pabeni@redhat.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series udp: GRO L4 improvements | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers warning 2 maintainers not CCed: yoshfuji@linux-ipv6.org dsahern@kernel.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 8 this patch: 8
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: line length of 90 exceeds 80 columns
netdev/build_allmodconfig_warn success Errors and warnings before: 8 this patch: 8
netdev/header_inline success Link

Commit Message

Paolo Abeni March 25, 2021, 5:24 p.m. UTC
After the previous patch, the stack can do L4 UDP aggregation
on top of a UDP tunnel.

In such scenario, udp{4,6}_gro_complete will be called twice. This function
will enter its is_flist branch immediately, even though that is only
correct on the second call, as GSO_FRAGLIST is only relevant for the
inner packet.

Instead, we need to try first UDP tunnel-based aggregation, if the GRO
packet requires that.

This patch changes udp{4,6}_gro_complete to skip the frag list processing
when while encap_mark == 1, identifying processing of the outer tunnel
header.
Additionally, clears the field in udp_gro_complete() so that we can enter
the frag list path on the next round, for the inner header.

v1 -> v2:
 - hopefully clarified the commit message

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---
 net/ipv4/udp_offload.c | 8 +++++++-
 net/ipv6/udp_offload.c | 3 ++-
 2 files changed, 9 insertions(+), 2 deletions(-)

Comments

Willem de Bruijn March 26, 2021, 5:51 p.m. UTC | #1
On Thu, Mar 25, 2021 at 1:24 PM Paolo Abeni <pabeni@redhat.com> wrote:
>
> After the previous patch, the stack can do L4 UDP aggregation
> on top of a UDP tunnel.
>
> In such scenario, udp{4,6}_gro_complete will be called twice. This function
> will enter its is_flist branch immediately, even though that is only
> correct on the second call, as GSO_FRAGLIST is only relevant for the
> inner packet.
>
> Instead, we need to try first UDP tunnel-based aggregation, if the GRO
> packet requires that.
>
> This patch changes udp{4,6}_gro_complete to skip the frag list processing
> when while encap_mark == 1, identifying processing of the outer tunnel
> header.
> Additionally, clears the field in udp_gro_complete() so that we can enter
> the frag list path on the next round, for the inner header.
>
> v1 -> v2:
>  - hopefully clarified the commit message
>
> Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Reviewed-by: Willem de Bruijn <willemb@google.com>
diff mbox series

Patch

diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c
index 25134a3548e99..54e06b88af69a 100644
--- a/net/ipv4/udp_offload.c
+++ b/net/ipv4/udp_offload.c
@@ -642,6 +642,11 @@  int udp_gro_complete(struct sk_buff *skb, int nhoff,
 		skb_shinfo(skb)->gso_type = uh->check ? SKB_GSO_UDP_TUNNEL_CSUM
 					: SKB_GSO_UDP_TUNNEL;
 
+		/* clear the encap mark, so that inner frag_list gro_complete
+		 * can take place
+		 */
+		NAPI_GRO_CB(skb)->encap_mark = 0;
+
 		/* Set encapsulation before calling into inner gro_complete()
 		 * functions to make them set up the inner offsets.
 		 */
@@ -665,7 +670,8 @@  INDIRECT_CALLABLE_SCOPE int udp4_gro_complete(struct sk_buff *skb, int nhoff)
 	const struct iphdr *iph = ip_hdr(skb);
 	struct udphdr *uh = (struct udphdr *)(skb->data + nhoff);
 
-	if (NAPI_GRO_CB(skb)->is_flist) {
+	/* do fraglist only if there is no outer UDP encap (or we already processed it) */
+	if (NAPI_GRO_CB(skb)->is_flist && !NAPI_GRO_CB(skb)->encap_mark) {
 		uh->len = htons(skb->len - nhoff);
 
 		skb_shinfo(skb)->gso_type |= (SKB_GSO_FRAGLIST|SKB_GSO_UDP_L4);
diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c
index faa823c242923..b3d9ed96e5ea5 100644
--- a/net/ipv6/udp_offload.c
+++ b/net/ipv6/udp_offload.c
@@ -163,7 +163,8 @@  INDIRECT_CALLABLE_SCOPE int udp6_gro_complete(struct sk_buff *skb, int nhoff)
 	const struct ipv6hdr *ipv6h = ipv6_hdr(skb);
 	struct udphdr *uh = (struct udphdr *)(skb->data + nhoff);
 
-	if (NAPI_GRO_CB(skb)->is_flist) {
+	/* do fraglist only if there is no outer UDP encap (or we already processed it) */
+	if (NAPI_GRO_CB(skb)->is_flist && !NAPI_GRO_CB(skb)->encap_mark) {
 		uh->len = htons(skb->len - nhoff);
 
 		skb_shinfo(skb)->gso_type |= (SKB_GSO_FRAGLIST|SKB_GSO_UDP_L4);