| Message ID | E1m2y9R-0005wP-7n@rmk-PC.armlinux.org.uk (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [RFC,net-next] net: mvpp2: deny disabling autoneg for 802.3z modes | expand |
| Context | Check | Description |
|---|---|---|
| netdev/cover_letter | success | Link |
| netdev/fixes_present | success | Link |
| netdev/patch_count | success | Link |
| netdev/tree_selection | success | Clearly marked for net-next |
| netdev/subject_prefix | success | Link |
| netdev/cc_maintainers | warning | 1 maintainers not CCed: linux@armlinux.org.uk |
| netdev/source_inline | success | Was 0 now: 0 |
| netdev/verify_signedoff | success | Link |
| netdev/module_param | success | Was 0 now: 0 |
| netdev/build_32bit | success | Errors and warnings before: 6 this patch: 6 |
| netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
| netdev/verify_fixes | success | Link |
| netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 15 lines checked |
| netdev/build_allmodconfig_warn | success | Errors and warnings before: 6 this patch: 6 |
| netdev/header_inline | success | Link |
On Mon, 12 Jul 2021 16:47:21 +0100 "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> wrote: > The documentation for Armada 8040 says: > > Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... > When <PortType> = 1 (1000BASE-X) this field must be set to 1. > > We presently ignore whether userspace requests autonegotiation or not > through the ethtool ksettings interface. However, we have some network > interfaces that wish to do this. To offer a consistent API across > network interfaces, deny the ability to disable autonegotiation on > mvneta hardware when in 1000BASE-X and 2500BASE-X. > > This means the only way to switch between 2500BASE-X and 1000BASE-X > on SFPs that support this will be: > > # ethtool -s ethX advertise 0x20000006000 # 1000BASE-X Pause AsymPause > # ethtool -s ethX advertise 0xe000 # 2500BASE-X Pause AsymPause > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > --- > net-next is currently closed, but I'd like to collect acks for this > patch. Thanks. > > drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c > index 3229bafa2a2c..878fb17dea41 100644 > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c > @@ -6269,6 +6269,15 @@ static void mvpp2_phylink_validate(struct phylink_config *config, > if (!mvpp2_port_supports_rgmii(port)) > goto empty_set; > break; > + case PHY_INTERFACE_MODE_1000BASEX: > + case PHY_INTERFACE_MODE_2500BASEX: > + /* When in 802.3z mode, we must have AN enabled: > + * Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... > + * When <PortType> = 1 (1000BASE-X) this field must be set to 1. > + */ > + if (!phylink_test(state->advertising, Autoneg)) > + goto empty_set; > + break; > default: > break; > } Acked-by: Marek Behún <kabel@kernel.org>
Hi, pon., 12 lip 2021 o 17:47 Russell King (Oracle) <rmk+kernel@armlinux.org.uk> napisał(a): > > The documentation for Armada 8040 says: > > Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... > When <PortType> = 1 (1000BASE-X) this field must be set to 1. > > We presently ignore whether userspace requests autonegotiation or not > through the ethtool ksettings interface. However, we have some network > interfaces that wish to do this. To offer a consistent API across > network interfaces, deny the ability to disable autonegotiation on > mvneta hardware when in 1000BASE-X and 2500BASE-X. > s/mvneta/mvpp2/ With that change you can add my: Acked-by: Marcin Wojtas <mw@semihalf.com> Thanks, Marcin > This means the only way to switch between 2500BASE-X and 1000BASE-X > on SFPs that support this will be: > > # ethtool -s ethX advertise 0x20000006000 # 1000BASE-X Pause AsymPause > # ethtool -s ethX advertise 0xe000 # 2500BASE-X Pause AsymPause > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > --- > net-next is currently closed, but I'd like to collect acks for this > patch. Thanks. > > drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c > index 3229bafa2a2c..878fb17dea41 100644 > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c > @@ -6269,6 +6269,15 @@ static void mvpp2_phylink_validate(struct phylink_config *config, > if (!mvpp2_port_supports_rgmii(port)) > goto empty_set; > break; > + case PHY_INTERFACE_MODE_1000BASEX: > + case PHY_INTERFACE_MODE_2500BASEX: > + /* When in 802.3z mode, we must have AN enabled: > + * Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... > + * When <PortType> = 1 (1000BASE-X) this field must be set to 1. > + */ > + if (!phylink_test(state->advertising, Autoneg)) > + goto empty_set; > + break; > default: > break; > } > -- > 2.20.1 >
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 3229bafa2a2c..878fb17dea41 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -6269,6 +6269,15 @@ static void mvpp2_phylink_validate(struct phylink_config *config, if (!mvpp2_port_supports_rgmii(port)) goto empty_set; break; + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + /* When in 802.3z mode, we must have AN enabled: + * Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... + * When <PortType> = 1 (1000BASE-X) this field must be set to 1. + */ + if (!phylink_test(state->advertising, Autoneg)) + goto empty_set; + break; default: break; }
The documentation for Armada 8040 says: Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ... When <PortType> = 1 (1000BASE-X) this field must be set to 1. We presently ignore whether userspace requests autonegotiation or not through the ethtool ksettings interface. However, we have some network interfaces that wish to do this. To offer a consistent API across network interfaces, deny the ability to disable autonegotiation on mvneta hardware when in 1000BASE-X and 2500BASE-X. This means the only way to switch between 2500BASE-X and 1000BASE-X on SFPs that support this will be: # ethtool -s ethX advertise 0x20000006000 # 1000BASE-X Pause AsymPause # ethtool -s ethX advertise 0xe000 # 2500BASE-X Pause AsymPause Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- net-next is currently closed, but I'd like to collect acks for this patch. Thanks. drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 9 +++++++++ 1 file changed, 9 insertions(+)